Ringer volume slider bar keeps turning on, how do i disable it while I'm taking pictures.

I have gone in and tried to set all to vibrate, but still the ringer volume keeps coming up and the volume bar shoots all the way to high
it diong wrong, I keep missing those Kodak moments, waiting for it to clear from the LCD when in the camera mode. 

I believe I found the problem, an app I have for a radio station, I just noticed the volume was all the way up.
I turned it down. right after I posted this I clicked on "More like this" off to the right, and believe I got what I needed as for an answer. Thanks to Rat_boy's Question and Bryan_Mick's knowledge.if this all it took, then ill be a happy camper for the eclipse tomorrow. Thanks Again Bryan 

Similar Messages

  • No response from the the volume slide bar on keyboard

    i recently purchased a new dv6 model. However, its volume slide bar on the keyboard doesnt seem to work anymore. I have tried restart the laptop but i still cant get it to work.
    Is there any way to fix this problem?
    Thanks for the help!

    Hello C Riv
    Try a proper SMC Reset > http://support.apple.com/kb/HT3964
    +1. Shut down the computer.+
    +2. Unplug the computer's power cord.+
    +3. Press and hold the power button for 5 seconds.+
    +4. Release the power button.+
    +5. Attach the computers power cable.+
    +6. Press the power button to turn on the computer.+
    Dennis

  • I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

  • After upgrade to iOS8, very slow, no volume slider bar, no volume through the iPad although the headphones work. My volume slider bar now reads"Sound Effects"?? Mute is off, need help. So frustrated!

    I need help! After upgrading to iOS8.1.2 , my volume slider bar disappeared and is now "Sound Effects" ??? I have no external sound. Do have sound through headphones. Mute is off. Have tried resetting several times with no luck. Frustration level is building as I have wasted hours now on this. Any help would be greatly appreciated!

    I do not think apple will do much to help you under warrenty,  as this was caused by a fall.  (alas!)
    I think the case is, as you suggest, jamming the rocker down, and it may have damaged the swith itself.  Can you carefully lever it out of the way?   Very very carefully.   If it is already broken, there is not much harm you can do by trying. 
    If it is just the switch being jammed, you might be able to move it out a little.  If it is the swith itself, you will need some real service after your three hour drive.  You might check your loacl area for a closer service repair source.

  • ITouch not recognising headphones(no volume slide bar)

    hi I have an ipod touch 32GB 1st Gen running OS 3.1.3
    and recently a new problem has arisen.
    when my headpones are plugged in, they play very quietly and I have no option of adjusting the volume, slide bar just isn't there.
    I have tried various headphones, and the ones I use with my ipod I tried on my laptop and they work fine.
    this has been happening for about 2 weeks now, and sometimes after resetting my ipod (holding lock and menu button at the same time) it makes it work but very raerly, and sometimes after disconnecting and re plugging in the headphones the slide bar appears, however nearly always asoon as I stop using the ipod and then go to use it again the problem returns.
    and now for past 2 days I've been unable to get the slide bar up at all.
    Anyone know ways to fix it.
    also if it's not possible to fix from home, would I be able to get it repaired by apple despite I do not have warranty for it (bought it second hand off ebay)
    thank you

    Sounds like you need a new logic board.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Volume slider bar has changed appearance

    My volume slider bar has disappeared & in it's place I have a series of dots. Anybody have any ideas?

    See if this helps: iPod "stuck" on the artwork or rating screen

  • Slide bar to turn off power...

    When I first set up my Ipad, there was a slide bar to turn off power. Since I have charged my Ipad the slide bar to turn off power is no longer there. Is this normal after you set up the Ipad?

    Press and hold the button at the top of the iPad until the slide to power off is displayed.

  • HT203175 LOCK KEEPS COMING UP, HOW DO I DISABLE?

    LOCK KEEPS COMING UP, HOW DO I DISABLE?

    The only thing I did was I went to the Apple.com , logged in and changed my primary e-mail since I will be losing the old email soon ( I have a different job). I said update info and verified the email was correct. I just went to settings on icloud and logged out and tried to log in and now it won't take anything. I don't even know now which e-mail they want the primary one or recovery, it won't take any of the 3. Not sure what else to try at this point, I guess I can't buy any more music.

  • My ht-ct80 sound bar keeps turning itself off every 15min.

    4 days ago I bought a htct80 sound bar and it keeps turning itself off every 15min. I serched the internet for a solution to no avail. So I need a answer from sony. Its a great sound bar while its on. Please give me a solution or i will have to take it back for a refund this weekend. If anyone else is having this ptoblem. And i know there are many please reply to this post. The more that reply the more likely we will get a rwsponse from sony.

    Hello everyone,
    The Sound Bar turning off every 15minutes is related to the Auto Standby function due to the Sound Bar not receiving an input signal.  Unfortunately, there are two conditions where the sound bar will recieve a low input signal that results in the Auto Standby triggering incorrectly.
    The first case is when the TV’s headphone jack serves as an audio output jack.  This is not a recommended method for Audio Input for the Soundbar.  If you are using this method, check the TV’s audio output settings. For details, refer to the TV’s operating instructions.  If you can not change audio output setting, set up TV volume which is strong enough to prevent it from entering Standby mode.
    The second case is when you are using a set-top box (Cable box) that has a volume setting.  You can either change the Audio Settings on the set-top box for Fixed Audio Out (if available) or increase the volume on the set top box(Cable box) to maximum setting and then adjust the volume on the Sound Bar itself to obtain the desired actual volume.
    Thank you,
    ---Chris

  • MISSING VOLUME SLIDER BAR SOLVED!!!

    I have found the culprit! It has taken me a very long time to figure it out what it was but it has finally been found. The volume slider disappears when playing music or watching videos but otherwise works.
    The problem is the 32pin connector. If you don't believe me take your phone and place a hard plastic card of some sort (creditcard, school I.D) and place it underneath the 32pin connector. Look at your volume slider and it should appear! You must get your 32pin connector replaced.

    I wouldn't go as fr as getting a new iPod yet. Take it into a genius bar and see what they say. I got my old iPod nano that got sent through the wash replaced for around $50. I don't promise anything.

  • My printer keeps turning off, how do I stop it from turning off.

    My eprinter keeps turning off and therefore I get error messages that the printer is not ready.  How do I make sure the printer never turns off so that I can print from anywhere and not worry about it not printing. 
    Thanks
    Navyretired2306

    Stephanie...
    Try deleting iTunes Helper from Login Items...
    Instructions for Windows and Mac both >  http://osxdaily.com/2009/09/10/ituneshelper-what-does-itunes-helper-do/

  • My password keeps getting hacked, how can i disable my account and start a new one and not lose all the stuff I already have?

    Hi All,
    I need help, my password keeps getting hacked, and I keep changing the password, and changing all my security questions. I have changed everything I can. How can I disable my account, but not lose everything that I already have in there? Is this possible or do I have to start all over again?

    You might have some better luck if you call your country number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team.

  • HT3275 I'm trying to backup my stuff onto my timecapsule but I get this, "Open Timemachine preferences to select backup disk."  When I open up my preferences I can't find the slide bar to turn it on anywhere.  Any suggestions?

    My system preferences no longer works.  I click on it and nothing happens.  This means I can't change my background picture or do anything else related to it.  So I'v been planning on backing up all my info and then downloading again all of my programs.  I don't even know if that will work, but the main problem is I can't get my timemachine preferences to open to allow me to turn on the side bar to select my timecapsule as the disk to backup everything.  Any Suggestions?

    Use a different utility to do the backup.. you don't need to use TM exclusively.. and you should backup just the personal files.. as whatever is broken in the install you don't want back again anyway. Superduper is free to download and use to do a full backup. But verify the disk first as it sounds like something is bad.
    http://pondini.org/TM/Troubleshooting.html Look at A5, do a verify of the disk your OSX installation is on.. it has corrupted itself somewhere.

  • Volume slider bar missing from side of my itouch

    I have a itouch 3G and I cracked the screen a couple of months ago. I know that my 1 year warranty does not cover cracked screens, so I did not do nothing about it because it was just a crack on right corner of the screen and I checked everything else and I saw no other damage. Just the other day I was listening to my itouch and when I was changing the volume of my music using the volume bar on the side of my itouch I saw that part of my volume bar was crack and fell out of the ipod. Well since that happen the rest fell of the volume bar fell out and I have no volume bar on the side anymore.Is my warrenty still good to get that fixed or am I better off saving up and buying a new ipod?

    I wouldn't go as fr as getting a new iPod yet. Take it into a genius bar and see what they say. I got my old iPod nano that got sent through the wash replaced for around $50. I don't promise anything.

  • Ever since I updated to OSX 10.9.3 the menu bar and dock keep hiding. How can I disable this?

    I updated to OSX 10.9.3 and now the top menu bars and the dock always hide. I always have to click at the top to get them to show again. I wan't to see them all the time as before. Any solutions? Btw. my automatically hide and show dock option from the dock options menu is disabled, but everything keeps hiding.

    They hide when you use an App in Full Screen mode
    Go to the top of the display and force the menu bar to be revealed and click on the blue full screen icon, to take it out if that mode

Maybe you are looking for

  • How can I get a new tab to open to my homepage, instead of a blank, untitled page?

    When I click on the + to open a new tab, I would like that new tab to open to my homepage, not just to a blank, untitled page. I have looked through the help pages, but have not been able to find any instructions on how to make this happen. Is it pos

  • Career ladder in Netweaver EnterPrise Portal

    Hi , Can any one advise me on whats the carreer ladder in SAP Netweaver Enterprise Portal ? i started working  as ABAP  developer and now get trained in Enterprise Portal , So i wanted to ask  weather to go for portal ahead or continue with  ABAP..

  • Taking too much time for saving PO with line item more than 600

    HI We are trying to save PO with line items more than 600, but it is taking too much time to save. It is taking more than 1 hour to save the PO. Kindly let me know is there any restriction for no. of line items in the PO. Pls guide regards Sanjay

  • Flex 3 Migration Problems

    Hi - We are having significant problems after migrating between Beta 3 and the GA release. Differences in the accordion component, comboboxes, spacing, control focus, etc. Has anyone else had these problems? Is there a list of the things that changed

  • Editing source files directly - possible?

    Hi there,   We're just looking at Edge Animate with respect to creating some interactive elements for use in DPS/InDesign. Is it possible to make modifications to an Animate project directly in the Javascript source and see this reflected in Animate?