Ringer volume stays off when coming out of silent mode

Hi,
When I turn the ringer volume back on after having it in silent mode the ringer volume stays at zero and I have to manually turn it back up!
Any ideas?
Ta

I had same question.  Looks like no one can help us

Similar Messages

  • Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  The screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.

    Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  It will flicker, the screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.  Getting more frequent.  After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

    See if it's related to this...
    The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • E9220y hangs when coming out of sleep mode

    My new HP Elite e9220y hangs when coming out of sleep mode-  When I 'touch a key' or move mouse, power switch on computer turns from yellow to blue, but monitor remains black.  Have to force off, and restart.  Adjusted power management to 'never' sleep but I was hoping for a more elegant solution.

    Quote
    Originally posted by southmike
    but i would try the settings i used in my psu/sleep thread.
    https://forum-en.msi.com/index.php?threadid=43603&sid=
    it fixed my hang problems and even got my lights to sleep properly
    Southmike, I'm glad I could help you out.  When I tried using the settings you stated, it didn't help me resume from standby.  However, I did finally get standby to work by first resetting the BIOS to default, and then setting the Power Management to:
    ACPI Standby: S3
    Call VGA BIOS (no idea what this is): Enable
    USB Wakeup: Enable
    Power Management/APM: Disable
    And, I also disabled a few other things I dont use like onboard Audio and RAID and voila, now WinXP can go into standby and resume from it piece of cake.

  • 7.3.2.6 crashes when coming out of standby mode

    Has anyone else seen this problem with iTunes 7.3.2.6?
    It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
    Using standby was OK with iTunes 7.2.

    Okay. Let's try getting a fresh one through to Roy.
    If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
    Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
    In the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • Why does my MAC sometimes crash when coming out of sleep mode?

    My mac freezea sometimes when coming out of sleep mode, and occasionally the screen will go black. At other times I will be using the MAC and it will just freeze. The only way to get out of it is to kill power and reboot. It seems to be happening more frequently.
    It was suggested that I fix permissions and start in sleep mode. This has helped in the past, and I am going to do it again now. I also recently upgraded to 10.6.8, and after that the crashes were fewer, but now they are increasing again.
    I am including a log of the recent crash a few minutes ago.
    12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:15 AM com.apple.launchd.peruser.501[94] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    12/23/11 11:41:23 AM com.apple.launchd.peruser.501[94] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
    12/23/11 11:41:34 AM com.apple.WindowServer[71] Fri Dec 23 11:41:34 Macintosh.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory

    Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine  if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

  • Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

    Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

    But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

  • IMac doesnt always reconnect when coming out of sleep mode

    I have newly converted from pc to mac. I have a new iMac 20" with the Intel Core 2 Duo processor and the new Airport Extreme Base Station. The only problem I seem to have is when my system comes out of sleep mode, it does not always reconnect to the base station. The only option I can see is to turn off the airport on my computer then turn it back on. Is there some other setting or another fix for this? Thanks!
    iMac   Mac OS X (10.4.9)  

    Hi Applehave posted a fix for this. I had the same problem on my Macbook.
    Go to System prefs>network
    Choose Airport in the show field
    Under the airport tab choose by default,join preferred network
    Any wireless connection listed using WPA or WPA2 security remove using the - option.
    change the By default, join option back to Automatic
    Re-connect to your router this will add it back into the list and you will reconnect automatically after sleep.
    It fixed my problem

  • Z77A-GD65 - Intel Network Adapter disabled when coming out of sleep mode

    Just put together a new system with a Z77A-GD65 motherboard, Core i7 3770, and Corsair Vengeance RAM.
    Installed the Windows 8 RTM (final release) version, which installs flawlessly and works fine. (Yes, I have an early license to Win8).
    Here's the problem.  If the system goes to sleep, when it comes back out of sleep mode, the Intel Network Adapter stops working. (Hence, all network and internet connectivity is off). This is evident by the Network Status icon in the explorer task tray showing a red "X".  Any attempt to run the troubleshooter results in the message "The Intel 82579LM Gigabit Network Connection adapters is experiencing driver or hardware problems".  Screenshots and log files can be found on my Skydrive here: h t t p : //sdrv.ms/NVBatL
    The driver version of the NIC, is what Windows installed during setup, is from Intel, version 12.0.150.0 dated 2/29/2012. (It was installed with Windows 8 by default).
    Rebooting the machine fixes the problem.  For now, setting the Windows power settings to never sleep is my current workaround. I tried downloading and installing some software and driver packages from Intel that I thought might update the driver, but it did not work.
    I am assuming this issue will not be present if I put on Windows 7, but that's what I was really hoping to avoid.  Suggestions?  Newer Intel driver available?

    Quote
    I don't know why you think this workaround "defeats the the object of having power saving features".  That might be a fair point if this was a laptop relying on battery charge.  But "sleep" doesn't mean "zero power".  It means just enough power to keep the memory alive and some LEDs blinking.
    In the case of a desktop build, keeping the LAN adapter awake is a non-issue.  Several hundred watts of power are being consumed when the PC is on. When it goes to sleep, that power usage drops down just a handful of watts.  If the workaround means having to dedicate an extra watt of power to the LAN adapter, then so be it.
    I am not trying to discourage what you did. I have found many a work around to niggly bugs over the years. All I am trying to state is that this bug should be fixed, i.e. the LAN should wake up together with the PC. At the moment it works for you, which is great, and you reported it. Nothing more you can do.
    As for the power saving. Yes of course we are talking about negligible consumption here, but the principle is that all these new machines have to comply with EuP2013 which dictates a maximum power usage for the total system when being in a sleep state. This can obviously not be achieved when one has to keep components powered because of a bug. 
    I would be interested to know what ME firmware version you have on your machine. I myself have had irritating intermittent issues with the Intel LAN on the same board as you in terms of the LAN remaining dead after start up whenever I change HW or do firmware updates. It then takes a restart to get the LAN active again.
    Intel has released two IME updates over the last month and there is a recent update for the Ethernet controller as well. I updated both and am monitoring. Since the update I have not had any further issues, but its still early days and I am reluctant to say it solved the issue.

  • Only 1 of my 2 Thunderbolt displays restarts when coming out of sleep mode now that I have installed Mavericks

    My setup:
    Early 2011 Macbook pro
    2 Thunderbolt monitors: one monitor connected to the macbook pro, the second monitor connected to the back of the first monitor
    Everything worked great until I installed Mavericks.  Since installing Mavericks, when my laptop comes out of sleep mode only the monitor that is connected to the macbook wakes up.  The second monitor does not wake up.
    In order to get the second monitor to wake up I have to either unplug the thunderbolt connection from the back of the first monitor and plug it in again or unplug the first monitor's thunderbolt connection from the macbook and then plug it in again.
    I've tried changing the order of the monitors that are connected to the macbook and rebooting the machine as well.  Nothing works.  Help?

    Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine  if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

  • MacBook freezing when coming out of sleep mode

    Several times now my computer has completely frozen just after it comes out of sleep mode, and I've had to manually shut it down using the power button. Is anyone else having this problem?

    I bought two Macbooks; 2.4 Ghz, one was directly purchased from Apple with 4GB RAM; the other one was standard equipped with 2GB, but shop swapped it to 4GB total.
    The last Macbook has exactly same problem as you all describe. Most of the times when you open the lid, the Macbook doesn't wake up from sleep. Screen remains black, though keyboard backlit turns on.
    Computer hangs completely; and need to perform hard-power-down. Indeed also power LED is not pulsating during sleep; or stops doing it after a while.
    I've tried to reset the SMC as suggested in other threads, but it didn't help. Has anybody already gone to Apple about this and got this resolved? I'm not sure whether it's the memory upgrade of the shop, as the other Macbook that came with 4GB seems not have this problem anymore (I had it only once on the first day). Not sure whether RAM upgrade is problem, because while running the Macbook it works perfectly and is completely stable.

  • Macbook Air screen stayed black when coming out of sleep

    I put my MBA on sleep earlier today. When I came back to wake it up, the screen stayed black (but somehow backlit). I had to close the top and open it back again in order to wake it properly. Anyone knows what happened? Should I worry about this? Maybe it's nothing and I'm overreacting, but I had so many issues with my last laptop (not an Apple product though) that I kinda became crazy about my computers.
    My Macbook Air is two weeks old. It's a 11 inches running Maverick 10.9.5 and every software is updated.
    Thanks!

    Having something like that happen just once is no reason to be concerned. I’ve seen it happen - it isn’t common and it doesn’t necessarily mean anything is wrong. Being hyper sensitive about a new computer is normal, especially after experiencing the kind of disaster it sounds like you did with your previous computer.

  • HP Photosmart 6520 not printing when coming out of "sleep" mode

    A few months ago I bought an HP Photosmart Model 6520 e-All In One printer.  It has never performed properly and I've tried everything I can think of to fix it.
    When in "Sleep" mode (how I wish you could just stop it from "sleeping"!!) it seems to just quit.  If I send something to the printer and it is in sleep mode, sometimes it will wake up and after a LONG wait print.  However, most of the time it will inform me that the printer can't communicate with the computer.  At this point I can sometimes get it to print after completely rebooting the printer, sometimes several times.  There have been times that even doing this won't work and I have to delete everything in the que and reboot the printer and hurry to get whatever it was I needed printed back into the que. 
    There have been times that nothing I did would work.  I would end the day and leave things in the printer que.  Next day, after turning the printer back on..everything starts to print.  Well at this point, whatever I needed printed isn't needed anymore.
    Waiting even several minutes for this printer to respond is crazy and waiting hours is not acceptable period!!  I have no idea why you are not given the option of keeping the printer from "sleeping" at all.  If the option is available, there should be some way to opt out of using it.

    These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
    1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
    2. Verify in the printer that 'Auto Off/Sleep' is disabled and/or the System Mode Time Out is set to zero (0). Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer Assistant, Printer Home Page (EWS). Also check your Printers Properties.
    3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
    4. If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and 8.8.4.4 at the Alternate DNS server.
    5. Verify the printer is on the latest firmware by checking with the HP Support site.
    In the router: (Refer to your router manual for information)
    1. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
    2. Set router to 20Mhz only, or 145Mbps depending on router.
    3. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
    4. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your system now and helps with wireless connectivity (if you want to know why, search the web).
    5. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same, they must be different for all bands, even for any Guest networks.
    6. SSID broadcast must be enabled.
    7. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
    8. Power on printer and verify it reconnects to router.
    Windows 7/8/8.1 Is Network Discovery on or off?
    1. Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
    2. Under Home or Work (current profile) / Network Discovery.
    3. Select "Turn on network discovery" and save changes.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Window outstretches when coming out of sleep mode...

    As the thread title implies, I have a problem in Photoshop Elements 6.0 that I found came with my Wacom Bamboo Pen Tablet...
    As of recently, whenever I put the computer to sleep mode I boot the system back up and my right hand panels are mostly out of view. Though they are mildly visible they are still basically unsable.
    I've noticed that this only seems to happen when I LOG OUT and go to sleep.
    If it will help with the troubleshooting: I am using a HP 2159 monitor which I just got on Saturday March 6, 2010. But please note that nothing else on the desktop is effected by this issue, just Photoshop Elements 6.0.

    I found a solution. Simply press Escape and it refits itself to the screen resolution whatever that may be.

  • Laptops not reporting when coming out of sleep mode

    Currently I have set my schedule so that Laptops inventory on a weekly basis. Our users will routinely place their laptops in sleep mode at the end of the day instead of turning them off due to the long log-in times in the mornings. When the user reconnects in the morning their network connections are restored and they continue on as normal. The problem is ZAM thinks that the device is NOT connected to the network and is unable to inventory it according to its schedule. Once the user does a complete reboot then ZAM is fine until the next time the device is placed in sleep mode.
    I believe the problem is due to ZAM holding onto the old IP address and not seeing the device when it connects through the newly acquired IP address.
    Is there something to that can be changed in the manager that I have not found yet? Any suggestions?

    Hi,
    DaryRo wrote:
    >
    > Yes the devices have a local firewall installed however they have the
    > appropriate ports open to allow the ZENworks Client to pass through.
    "Can you try without it"?
    > The problem appears to be that when the laptops acquire a new IP Address
    > the next day that the Client never releases the old IP Address and
    > cannot resolve until it process is restarted.
    I doubt that. As I said, this doesn't match my results, and of course I
    *do* acquire a new IP, in fact in my case it's even three of them
    (local, home, VPN). What makes you think that's the case?
    > I can have our system architects write a small script to reinitalize
    > the client when the laptop reconnects but I don't think that should be
    > necessary.
    Right.
    > Is there a setting in the Manager that would make the client
    > do this?
    No, it does it automagically.
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Issue when coming out of vibrate mode

    Hello all,
    This has happened a couple of times now with my 3GS. I put my iphone on charge and selected silent vibrate mode with the side switch. In the morning, the battery was at 99% and even though I had selected ringing mode with the side switch, the phone remained in silent (vibrate) mode. I got a text, it vibrated with no message alert. I tried typing a text and the keyboard didn't make the click sound on each key press. I rebooted the phone and all was back to normal including the battery indicator, now at 100%...???
    Has anyone else experienced this? I'm not too bothered if it occasionally needs a reboot but I am curious to see if its a firmware bug?
    My iphone is running the latest release and is from Orange UK - Locked.
    Thanks

    Though it's not normal... it doesn't hurt to do a hard reset every now and then...
    To try to resolve I'd suggest a full restore using "set up as new iPhone" this will take all the bugs out that could be causing the issue...

Maybe you are looking for