Ringtone and Tv-out(Component AV Cable) problems

1. When I receive a phone call, I cannot hear the ringtone and No Vibrate.
2. I only can charge the power and connect itunes on pc.
I can't use the cable to send some video or music to TV.
3. where can repair this machine? my telecom service provider said they don't have any repair support!(fetnet)
Thanks for your help.
Jesse

Hi,
I want to know if it is possible to install a software that allows to transfer
via Compositive cable TV all that is displayed on my ipod touch (safari, ect...).
Or is it an hardware problem?
Can anybody else help me?
Thanks!

Similar Messages

HT201272 Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error... I have tried all possible solutions i found on internet...my restrinction

Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error...
I have tried all possible solutions i found on internet...my restrinctions are disabled...tried reinstaling, relogging, restarting phone.. nothing seems to help...
normally i would contact custommer support but i m using US account and i m not from US. anyway my US account is charged with money and it workes perfectly for all my other friends using this method ( we got some free US vouchers so we needed US accounts)
Any advice?
thanks in advance

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Synching, ringtones and wiping out my contacts. What is wrong?

I just got a 3GS and imported my contacts from my old phone. Then I made four ringtones and installed them into the Ringtones folder in ITunes. I added them into my phone. Now I made 2 more ringtones but when I tried to install them by dragging from the ringtone folder to my phone ITunes wipes out my contacts. All the ringtones are with extensions M3r as required by ITunes. What am I doing wrong?

The new ringtones have M4r extensions and were easily moved to the Ringtones folder in ITunes. However, when I try to drag them into my IPhone they don't go in and in several cases my contacts are erased by ITunes and I have to go through the process of importing the contacts using the sim card from my old phone. There must be a better way.

Audio and video out of sync on short recordings

I've scanned the discussions and see that alot of posters are experiencing
the same problem I'm having which is recording quicktime movies
and getting audio and video out of sync.
In most of those posts the responses seem to be that the problem gets
bad if you're making a long recording. I'm experiencing that, but...
...I'm also having the same problem on really short recordings...less than a
minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
Any thoughts on why even short recordings through Quicktime are out of sync?
Thanks.

I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

Does the iPod Universal Dock work with the Apple Component AV Cable?

I have the iPod Universal Dock (MA045G/A) and the Apple Component AV Cable (MB128LL/B)...the ones in the original black packaging.
I had wanted to connect either my Nano 3G or my iTouch 1G to my TV, but neither would work through the docking station with the AV cable. Both did work when I tried not using the dock and connected both the Nano and the iTouch directly into the AV Cable.
My dock works great on my Computer, and I tried a second dock (same model) that I had into the TV with the AV cable and it still did not see the connection.
Is my particular iPod Universal Dock NOT COMPATIBLE with this Apple Component AV Cable (or for that matter, the Composite AV Cable-MB129LL/B)?
It's not a big deal since both do work with the AV cable by itself...it's just annoying I can't use the dock...

Are you sure it is genuine Apple cable? If you bought it on eBay or non-authorized Apple dealer it probably isn't. If it is a genuine cable, it is defective, and should be returned.
When a working genuine Apple A/V cable is plugged into iPhone, a popup appears asking if you want to enable the TV output. Since you are not getting this popup, your cable is bad.

Why is the ringtone i bought on iTunes not on my iPhone anymore, and greyed out in iTunes on the computer. and how do i fix this problem.

I recently bought some christmas ringtones. And i noticed after a day or so that the ringtone just disappeared. So i re bought it. That disappeared as well, so i bought another one.. well you see the pattern. But i sync'd my phone up to iTunes and they are on there, they are just greyed out with a circle of dots next to it. How do i fix this issue so i can have my ringtones, and songs, back onto my iPhone 6.
Thanks !

There has been a issue with ringtones and apple knows about it and is working on fixing it.
Apple is advising customers not to repurchase ringtones and if you did, just give them a ring and they will refund you.
Until then don't purchase any more ringtones at least until the next update.
You can request a refund by going to the Account section within iTunes on a Mac or PC, or you can get help by chat, or contact Apple Care.
Phill

Component Video Cable and Bumper Case

Just a head's up. If you have an iPhone 4 and a bumper case, the Component video cable will not fit properly when the bumper case is on. It inserts, but the cutout that fits the standard USB cable is too small for the plastic part of the cable that is larger on the Component Video cable.
When I tried to plug it in, I did not notice this the first time and got the "This accessory is not compatible" message. I also got B&W video. When I took the case off and the cable seated securely, I was able to get 420p video from the video I took with the camera. NOTE - The Component cable only supports 420p when playing on an NTSC TV. I was also able to see YouTube at 420p. I did not try anything else.
Hope this helps some of you avoid frustration

Yes I do live in Europe. But who says that Component Video Cable is a standart from USA or Japan. I have been using Component Video Cables to connect my DVD Player with my video projector since 2002. Component Video Cables are wisely used in Europe. And its the ONLY analogue way of transferring HD-Video (Plus DVI and HDMI)
What disturbs me alot is that on www.toshiba-europe.com they explain that my computer has:
Interfaces 1 x headphone
1 x DC-in
1 x line-in
1 x external monitor
1 x RJ-11
1 x RJ-45
1 x i.LINK (IEEE 1394)
4 x USB 2.0
1 x Monitor-in (line-in port)
1 x TV-antenna
1 x S-Video-in (Composite/Line-in)
1 x TV-out (s-video, Component-out))
1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)
Where is the Component-out ???Promise is a promise. Why do they say it if they dont give it?
Instruction manual also says that : D-Video port lets you transfer 525i(480i),525p(480p),1125i(1080i) or 750p(720p) data to external devices.
How can you transfer 720p with a Scart Cable?? It is impossible.... The only way that Qosmio can transfer 1280x720 picture is a Component Video cable.(Because it has no DVI port) How much does this cable cost anyway?? But the problem is NOBODY is producing it in Europe. I am writing to Toshiba-Japan. Since they are saying that my computer has Component-out so they must get me the cable....

Qosmio G20 = Component Video Cable and High Definition Videos With Pinnacle

Dear Everybody
I bought my Qosmio G20-120 from Poland which came with D-video to Scart cable. This cable is only capable of transferring Video (CVBS) signals which is pretty useless because Qoismio has S-Video Output already... Which is better than simple Video Output that I can get from Scart.
According to www.toshiba-europe.com Qoismio has supposed to have Component Video output. But it comes with Scart cable instead. I am still trying to get this Component Video to D-Video cable from the distributor. If I wont succeed, does anybody know if and where I can buy this cable in Europe? Or is it possible to make a component video to D-video cable out of D-Video to Scart cable?
As last did anybody try the high definition DVB-S channels on Qoismio by using USB 2.0 DVB-S TV Card.Any opinions about Pinnacle PCTV 400e ??
Thank You

Yes I do live in Europe. But who says that Component Video Cable is a standart from USA or Japan. I have been using Component Video Cables to connect my DVD Player with my video projector since 2002. Component Video Cables are wisely used in Europe. And its the ONLY analogue way of transferring HD-Video (Plus DVI and HDMI)
What disturbs me alot is that on www.toshiba-europe.com they explain that my computer has:
Interfaces 1 x headphone
1 x DC-in
1 x line-in
1 x external monitor
1 x RJ-11
1 x RJ-45
1 x i.LINK (IEEE 1394)
4 x USB 2.0
1 x Monitor-in (line-in port)
1 x TV-antenna
1 x S-Video-in (Composite/Line-in)
1 x TV-out (s-video, Component-out))
1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)
Where is the Component-out ???Promise is a promise. Why do they say it if they dont give it?
Instruction manual also says that : D-Video port lets you transfer 525i(480i),525p(480p),1125i(1080i) or 750p(720p) data to external devices.
How can you transfer 720p with a Scart Cable?? It is impossible.... The only way that Qosmio can transfer 1280x720 picture is a Component Video cable.(Because it has no DVI port) How much does this cable cost anyway?? But the problem is NOBODY is producing it in Europe. I am writing to Toshiba-Japan. Since they are saying that my computer has Component-out so they must get me the cable....

My iPhone 4 is no longer recognised by my laptop, and no longer registers being plugged in to charge, even though it will charge slowly if plugged in and turned off. It's not a cable problem or a computer problem, as I've checked these.

Hey, over the past couple of days my iPhone 4 (GMS, Model A1332, EMC 380B - running on iOS 7.1.2) has begun inexplicably intermittently not recognizing being plugged in to charge or being connected to my laptop. As of today, it has complete stopped recognizing being plugged in to charge or connected to the laptop.
If I plug it in to charge, whilst it is on, nothing happens and the battery drains.
If I plug it in to charge and turn in off, it will charge very very slowly - though it will charge fully after a long time.
When I connect it to my laptop, nothing happens - it doesn't appear in iTunes, and it doesn't charge or recognize being connected to the laptop (there is no charging symbol, no noise from either phone or computer registering the connection as it usual did, or another sign of any connection between the devices, though, again, it will charge very slowly if turned off).
I've ruled out the possibility of it being a cable problem, by using a friend's cable and finding that didn't allow it to recognize being plugged into the wall to be charged either, or being plugged into the computer.
My friend's cable does work on their own iPhone (ie, when plugged into the wall with their cable, their iPhone acknowledges this and charges properly, and when plugged into my computer with their cable both my computer and their iPhone recognize the connection).
So, it's definitely a problem with my iPhone itself, but I don't know what.
As I say, it will charge very slowly, if it's switched off whilst it's plugged in, but it won't acknowledge being plugged in, and will only drain if it is turned on whilst being plugged in - and it will not recognize being connect to my computer.
Please help me figure out what is wrong with it, as this is beyond annoying and I'm literally banging my head against the wall - the iPhone is little over a year old.
Cheers.

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

All of my purchased ringtones and songs dissapeared out of the blue. How do I get them back without having to buy them all over again?

Out of the blue, all of my purchased ringtones and music aren't displayed anymore on my iPhone.
I went to iTunes to see if they were stored there, but the downloads folder also appears to be empty. If I try to select a ringtone I've downloaded before, a popup appears saying that I've already purchased that item and asking if I want to cancel or buy. If I click on buy, then I pay for the item again even if I already have it! The only place I can still see my purchased items is in the iTunes application on my computer, but even though I've already selected sync, the ringtones and songs still won't appear on my iPhone.
What happeneded and how can I get them back without having to pay for them all over again?
Thank you!

I'm having the same problem on an iphone 4s running iOS8; when i updated to iOS8, all my ringtones went missing, and when i got a £50 gift card for christmas (2014), I purchased some songs from the iTunes store on my iPhone. i downloaded songs from paramore, panic! at the disco, coldplay, and imagine dragons, over wi-fi, and they went into my iphone music library; but when i re-opened the music app a few days later, in a place where i had no wi-fi, except for my 3G phone signal, some cloud icons appeared next to my newly purchased songs, telling me to re-download them from the cloud, when i haven't even deleted them. this has happened twice now, and i had to use up some of my 5GB data allowance to redownload them from the cloud. This is annoying and i need to fix this issue ASAP.

Iphone via TV out cables component av cable - docking station

I bought the mac component AV cables to hook up my iphone to my entertainment center. I had the docking station included with the iphone so i hooked it up to the cables I bought. I changed the setting in the iphone to output to the TV. I set the iphone in the docking station and it just played through the iphone. After some experimenting I found out it was the docking station that prevented me from hearing it through my entertainment center. I just hook the iphone directly to the cables I bought from MAC and it works fine. I would like to use the docking station though.
Any ideas or is a MAC issue?
thanks
Nixman

I wouldn't be surprised if you had to purchase a universal dock to get audio working through it. Not worth it in my opinion, especially since the cable already works for you.

Apple AV component cable problem

Hi I'm new, i hope you can help me!
my brother gave me the Apple AV component cable (audio: red white, video: red green blue), I was very happy about it and wanted to try it on my tv, but then i recognized that my tv doesn't has the red green and blue ones for video.
It has red white and yellow (scart).
cause of that i bought this http://www.elektro-planet.com/shop/catalog/images/5525-3rgb.jpg , but when I try to use it I don't get anything on the screen.
Only audio is appearing.
Can someone help me pls?

I had the same issue at first when I tried to plug the component cable into the front of my tv. Then I found the component connectors on the back of my tv.
The fuller explanation is there are two kinds of cables - Component and Composite.
Composite cable has three colors:
Red / White for sound
Yellow for video
Component cable has five colors
Red / White grouped as a pair for sound
Red / Blue / Green for video
My tv has AV 1 on the front, it uses Composite - and AV 2 on the back using Component. Hopefully yours also has component plugs somewhere.
I took a movie over to someone else's house and they only had Composite style connectors. Connect the Red/White audio plugs like normal and the green component plug into the yellow composite slot and you get black/white. It's the best you can achieve between two different techs.
I suggest going out and picking up the composite cable as well. Because, frankly, composite is the lowest quality of image and if you've got a higher quality tv then component will do you a better image. Seriously, connecting it all up on my tv and comparing picture quality side-by-side by flipping back/forth AV1 AV2, keep the component cable and get the composite cable as a "fall back" as necessary.

Hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem?

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem? It's not a problem in the settings as I set the rings and tones I want. The rare one comes thru with sound. I never had any problems before update.

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

Ringtone and Tv-out(Component AV Cable) problems

Similar Messages

Maybe you are looking for