Ringtone for individual contacts not working help!

I have had my Iphone for a week or so and I can not get individual ringtones for each contact to work. The guy at the ATT store was kind enough to transfer my contacts from my old Razr. ALL my calls are reverting to the default tone. This is very irritating. I can not find any duplicate entries in my contact list. I am on the verge of wiping all my contacts and starting over. Can someone help? Running OS 3.1.3.

Sorry user error.. There is a sneaky little toggle switch right above the volume controls... It was in silence mode... Doh!

Similar Messages

Port forwarding for the Web server for outside Internet (not working , help!!!!!!)

Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814

Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- ---

IPhone 4: Setting different ringtones for contacts not working.

I can't add personal ringtones for each contact. I have followed all contact editing info to the letter, yet I still only get the same one ringtone for each contact (the default ringtone I set for the phone). Setting different ringtones for text messages works fine, but not for telephone contacts. Is this feature broken? Is anyone else having this issue? Thanks.

It happened to me also when I first added specific ringtones to contacts, but just turning the phone off/on fixed it for me. You can try a reset also if that doesn't work (hold down the home and sleep/wake buttons at the same time until the Apple logo comes up)

F4 help for 0MAT_SALES is not working in BI 7

Hi Gurus,
The F4 help for 0MAT_SALES is not working when distibution channel is selected as (!=02) in Bex Analyzer. But for all other values for distibution channel i am getting values in F4 help.
Since 02 is excluded it is supposed to give values for all other combination. but it not so.
Could anyone of you please help me on this?
Thanks in advance.

Closing Thread

After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

Please helppppp

The Help Tab (OSX ML) where you search for something does not work

If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CC

Hi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt

Every time i want to buy something it tells me could not be completed for assistance contact itunes support help me plz????

every time i want to buy something it tells me could not be completed for assistance contact itunes support help me plz????

If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption

Please help I cannot buy anything in AppStore I'm here in Dubai it says YOUR PURCHASE COULD NOT BE COMPLETED FOR ASSISTANCE, CONTACT ITUNES SUPPORT Help me please I need to buy something please asap

Please help I cannot buy anything in AppStore I'm here in Dubai it says YOUR PURCHASE COULD NOT BE COMPLETED FOR ASSISTANCE, CONTACT ITUNES SUPPORT Help me please I need to buy something please asap

Click here and request assistance.
(84901)

Custom Ringtone for your Contacts on Nokia N900

Hey guys,
Its great to know that We got Nokia N900 in India now.
Many of people searching for custom ringtone for their contacts. I have installed app for it and worked great, here is the screen of how to do it.
1-goto app manager and download Ringtino app ( name specified in attached screen )
2-goto contact and click on title not edit contact, u will get " custom Ringtone " as like my screen.
Let me know if anything needed.
my other post
/t5/Maemo-Devices/Nokia-N900-works-in-India/m-p/658528#M7963
Rasu
Pallipalayam
Attachments:
Screenshot-20100719-110252.png ‏50 KB
Screenshot-20100719-111207.png ‏79 KB
Screenshot-20100719-111256.png ‏56 KB

works great now. you should be fine.
@elie
nice new avatar...

Change first name/last name convention for individual contacts

Hello. First off, I'm aware of how to set the convention globally under System Preferences. However, what I'm looking for is the ability to set this for individual contacts. This is an issue, because not everybody has an English name, but for those that do, firstname/lastname works better than lastname/firstname -- the reverse is true for those without one.
Basically I just need a way to change this setting for individual contacts. Is there a way?

There's no way to edit the setting individually. However, there's nothing to prevent you from putting a first name in the last name field or vice versa if it suits your needs better.

Content enrichment service for SP 2013 not working

Content enrichment service for SP 2013 not working
Not able to debug content enrichment service.. Can you please specify the steps for debugging the content enrichment service
Any help will be greatly appreciated.
Regards
BKPA
BKPA

Hi ,
Please see the following articles, run and debug service with breakpoints using F5 from VS, then register the custom content enrichment service with DebugMode and long Timeout to SharePoint, then start a full crawl to call the web service.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2014/04/08/how-to-use-the-sharepoint-2013-content-enrichment-web-service.aspx
http://www.jeanpaulva.com/index.php/2014/05/21/content-enrichment-web-service/
http://msdn.microsoft.com/en-us/library/office/jj163968(v=office.15).aspx#content_enrichment_configuration
http://www.blendmaster.net/blog/2012/09/using-content-enrichment-web-service-callout-in-sharepoint-2013-preview/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

How can i change the ringtone for different contacts. "edit contacts" won't let me`??

how can i change the ringtones for different contacts on the razor. "edit contacts" wont allow me to

Here is the Instructions your Looking For: Down towards the Bottom of the Instructions shows how to set Ringtones for each Contact.
How do I download and use ringtones on my DROID Razr & RAZR MAXX?
Quick links
Set any of your songs on your SDcard as a phone ringtone
Choose Phone ringtones through settings menu
Customize the text message ringtone
Assign a ringtone to a specific contact
Download ringtones from Play Store
1. Set any of your songs on your SDcard as a phone ringtone:
Touch Apps > My music
While the music is playing, touch the phone Menu Key > More > Use as ringtone
The ringtone is set as your default incoming call ringtone and copied to your Phone ringtone list.
Note: The above instructions are for the My music player and not for other players such as Play music.      2. Choose Phone ringtones through settings menu:
Press the Menu key
Touch Settings
Touch Sound
Touch Phone ringtone (If option is greyed out, make sure handset volume is not set to Silent Mode)
Select a Phone ringtone from the list. Press OK to set. (Music files you have set as Incoming Call ringtone from your SDcard will be included in this list along with downloaded and preloaded ringtones.
3. Customize the text message ringtone
From the homescreen or from within the applications tray, touch Text messaging
Press the Menu key (On the left with 4 squares)
Touch Messaging Settings
Touch Select ringtones (if option is greyed out, make sure Notifications is turned on / actived)
Touch on any Notification ringtone to select and hear a sample.
Press OK to set as notification ringtone
CLICK HERE for instructions on creating your own custom ringtone for Text Messages
4. Assign a ringtone to a specific contact:
Press Contacts icon on homescreen or tap on Contacts application from the Applications Tray
Touch and select the specific contact
Press the menu key
Touch Options
Touch V (down) icon next to Ringtone
Choose a Phone ringtone from the list and tap OK to set.
Note: To assign a music/song from your memory card as a ringtone, first follow step1 above and follow step 4 again. 5. Download ringtones from the Play Store
From the applications menu, touch Play Store
Touch search to search for ringtones.
Answers others found helpful
How do I setup and use Bluetooth on my DROID RAZR MAXX?
How do I transfer files to/from my DROID RAZR MAXX?
How do I set up and use the Smart Actions application using the DROID RAZR MAXX?
How do I use the DROID RAZR MAXX for video chat?
How do I force my DROID RAZR MAXX to reboot or restart?

HT204019 Can I turn off the ringtone for one contact only?

Is it possible to turn off the ringtone for one contact only? The block feature won't work because I still want to be able to receive voice messages from this particular contact.

You can assign a silent ringtone to that one person. Google to find such a ringtone, sync it to the phone, assign the custom ringtone to this person and when they call, the phone will appear not to ring.

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

Ringtone for individual contacts not working help!

Similar Messages

Maybe you are looking for