Ringtone, Graphics, headphones are not working. No...

sir my phone basic ringtone,graphics,headphone are not warking,plz solve the problem
Moderator's note: We have moved your post to the appropriate board and we have edited its subject as well so that other users can easily help you.

Have you tried updating software or resetting device?
What errors do you get on screen?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Internal speakers and headphones are not working

I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

Hi,
It could be either Hardware or Software related, so try the following and let me know.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My headphones are not working on my I pod 5 they Work a little but then stop how can I fix them

My headphones are not working for my iPod 5 they work a little but stop how can u fix them

first line in return for warranty should be the place one bought the place
same with a car then you should not be expected to ship it to toyota in japan yourself
and if you coka cola have an issue you don't have to take direct contact to cola company and the likes...

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

I recently installed vista to my mac (32bit)...my headphones are not working. I can't find the 3.5mm jack that apple suggests using. I have tried installing/unistalling several different audio drivers. Does anyone know how to solve this problem?

I recently installed vista to my mac (32bit). My headphones are not working on it. I could not find the "3.5mm jack" that apple suggests to "solve" this issue. And I have tried installing/uninstalling audio drivers. Can anyone help?

you don't need several drivers, you just need the audio driver for your Mac, which you didn't list, but would be Cirrus or RealTek.
Along with uninstalling programs, go to Dev Manager and uninstall driver, or even rollback driver.
some people have trouble installing or finding driver that will install.

My speaker as well as headphones are not working in hp pavillion dm4 1101tx series

my speaker as well as headphones are not working in hp pavillion dm4 1101tx series

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp51501-52000/sp51937.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MacBook speakers and headphones are not working! Please help.

MacBook OS X 10.6.8
2009 model
I was watching a movie and my MacBook randomly shutdown by itself. I turned it back on and had no more problems, so I restarted the movie. The audio was not working in my headphones. So I tried the internal speakers and there was still no sound. I did a quick google search which led me to trying various options and finally called Apple Support on the phone.
I've tried resetting my PRAM but it only showed an alternating screen between grey and black. Nothing happened. I also reset SMC but that didn't work either. I have checked everything in system preferences, Audio MIDI, etc. and it all appears to be correct.
While on the phone we found that when I plug headphones or an external speaker in, it does not show up on the "output" menu under System Preferences > Sound.
I do NOT have the money to go to a computer store and the nearest Apple Store is 2 hours away. I desperately need help because most of the work I do involves having to be able to listen to sound. Please help if you can. I'm not ignorant when it comes to computers but I'm no genius. If you have any ideas, please be specific. Your help is very appreciated.
PS. When a speaker is plugged in at first, I hear a little crackling from it. The same happens to what sounds like internal speakers if I start a video.

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Speaker and headphones are not working

In my new Iphone 4s left bottom speaker isn't working and also the right side of my headphones isn't working, can anyone help?

There is not a speaker on the left, that's the microphone.
As for the headset, have you tried a different headset?
Have you possibly enabled Mono audio? Settings > General > Accessibility > Mono Audio

Headphones are not working

please solve my problem

Dear.
welcome to HP forum,
1st of all please tell us the following things
1. Laptop/PC Model No.
2. Product Number
3. whether your Audio Drivers are installed or not.
4. If you don't use headphone then your PC produce sounds or not.
Please let us know with detail so that we can easily help you out.
Regards
WAQAR AHMED KAMBOH
Please click on the KUDOS BUTTON on the left of this post as a sign of THANKS GIVING
Please click on ACCEPT AS SOLUTION if your problem Solved.

Headphone is not working after plugin pavillion dv6000 CNF6430M51

Product :        Hp Pavillion dv6000
Serial    :        CNF6430M51
Product no. : RG254UA
this is the first time i sending you my first problem
since i have formated my system my new headphones are not working after plugin i have intalled sp34200 aslo but it is not fix my problem
Please help me out this
reply soon as you can
thanking you
kareem...

Your models driver page is in the link.You need the 'Microsoft Universal Audio Architecture (UAA) Bus Driver' before   correct Audio driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3245620&task=&
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My headphone is not working on macbook air 11

I have a macbook air 11", and after upgrading to mountain lion, my headphones are not working.
I have tried with multiple headphones and multiple software (itunes, skype, etc.), and I can´t hear.

First, turn the volume up.
Just kidding.
Do the internal speakers work?
Check Audio MIDI Setup (Applications -> Utilities).
If all looks good but still no sound, ask yourself - and check - if any 3rd-party apps or drivers are installed and running (-> Login Items?) that deal with sound. Update to ML-compatible versions or completely remove them.

I just downloaded Windows 10 and now my headphone will not work, the other caller can't hear me.

I just downloaded Windows 10 and now my headphones are not working and the other caller
can not hear me.

Please download and install the driver from the following weblink:
http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

My headphones speakers and microphone are not working please help

hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

4s- speakerphone, ringtones, alarm clock, alerts, siri are not working

The speakerphone, ringtones, alaram clock, all alerts, and siri are not working.

i would try these
- restart the phone
-turn air plan mode on and then off
-back up information
-restore the phone as new

Ringtone, Graphics, headphones are not working. No...

Similar Messages

Maybe you are looking for