RINGTONE? NOT ON SOUND LIST

RINGTONE IS NOT APPEARING ONSOUND LIST AFTER DOWNLOAD, TO SELECT AND ASSIGN TO DEFAULT OR OTHER , what am I doing wrong

You cannot purchase ready made ringtones from the itunes store on your computer.
You have to create the ringtone. Google will find several way to do this.
If it is an actual ringtone, then it will appear in the Tones category in your itunes library. If it is in the Music section, then it is not a ringtone.

Similar Messages

How do I get songs on MUSIC to SOUNDS list for to be ringtones on my Iphone4?

Help! I now have an Iphone 4 (my first smart phone) and previously bought all my ringtones from Verizon store. I was told I can no longer do that and have to purchase ringtones from Itunes. I am still navigating this phone (only had it for three days).
1. I was able to figure out how to get five songs from my Itunes library onto my Iphone4. I bought these five songs as RINGTONES from Verizon store when I had my old phone.
2. I synched my Iphone to my Itunes account choosing only these five songs ........ BUT the five songs do not appear on my "sounds" list. I can "see" them under my MUSIC icon on my phone.
How do I get these five songs onto my SOUNDS list so i can use them either for my main ringtone and/or Contact ID sound. or is this even possible?
How do I do this?
HELP!!!!

Is there any way I can retry to consolidate them in my external hard drive?
sure.
preferences > advanced. point iTunes media folder location to the external. on the same tab, ensure that the copy to ... and keep ... organized options are checkmarked. ok out of preferences.
now consolidate your files via library > organize library.
all media files will be copied to the external (except those that are already on it - if any).

Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

What happens when you play music? Do the hardware volume controls work when using the Music app?

Ringtones Not Listed Under "Sync Ringtones" List

I recently converted one of my MP3s to AAC, found it in Finder, renamed the file extension to .m4r, and reimported it into iTunes. It shows it under the Ringtones playlist and plays just fine. When I plug in my iPhone, however, under the Devices -> Brent's iPhone -> Ringtones tab, no ringtones are listed. I have it currently set to "All ringtones", but none are listed in the list below anyway, and none sync.
Why does my iTunes Ringtones list show one, but my Devices Ringtones list show none?

I also got this problem which I still can not solve.
Are playing time of ringtones you use less than 30 seconds? Have you changed to other computer for syncin? Did it work?

How can i import an mp3 to a Notification Ringtone under the "Sound Settings"?

how can i import an mp3 to a Notification Ringtone under the "Sound Settings"? (i can do it to "Phone Ringtones" easy, but not Notifactions)

This might work as well and will allow drag and drop of mp3 files. This is written as if the phone is connected to the computer.
In the sd card, check if there is a folder called media. In the media folder verify or create a folder called audio. Within the audio folder create the following folders: alarms, notifications, and ringtones. These should be typed exactly as written. Copy or move the files into the folder you want them in. Disconnect the phone from the computer and let the remount the sd card. Now go into your notification or ringtones list. The files you put into the individual folders should automatically be there.
I know that this works on the Eris and I got the method back when only the eris and droid 1 was available. I just can't remember exactly where I got it. Hopefully it also works for the Droid 1.
@Ron
Be nice please.

Tone alert downloaded into music file not in sound files how do I move them there

I downloaded a email alert and one for text alert from iTunes .Ithought they would go in to the list of sounds on my iPad2 but instead they are in my music list.Can I transfer them to my sound list?

I also did this after spending hours with Apple Reps about my lost tones. They said that I should BUY them on the Itunes Store and they would automatically show up in Tones. I did. They still don't. If they advertise them on the store as Ringtones, then they ought to show up as Tones. I see another 3 hour session with Apple for me, and no time slot to do that.
This is NOT just my issue. I have friends with the same problem. It needs to be fixed by Apple!

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How

After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How do I correct this. I am using Windows 8.1 . My wife has never had an iTuunes account

Hello Lakesidetom,
It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
How to find your Apple ID - Apple Support
Use these steps if you forgot your Apple ID or aren't sure that you have one.
Apple - My Apple ID
If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Music, View Options - Ringtones not showing up?

iTunes 8.0.2.20, iPhone 3G software 2.2. Many other threads complain of the 'bell' not being visible beside tracks that should be available as ringtones. In my iTunes the option to display rintones is not in the list. There is a Library item named 'Ringtones', but ringtones that I purchased do not show up there either. In 'Devices' the iPhone shows a tab for Ringtones, but their is nothing showing up there.
I uninstalled iTune and re-installed, but same problem. (It seems to me that it might be something wrong in the Windows Registry.)
I would appreciate any help ... perhaps a clean uninstall (instructions needed)

Did you buy the ringtone or just the song from which to make the ringtone.
To make a ringtone in itunes you must:
Buy the song - 99 cents
Find the song in the library and click the bell or highlight the song and click file>Create Ringtone
The editor will appear and you edit the song to the portion you want
Then you click "Buy" - another 99 cents
Then sync iphone

Solution who encounter 'Setup does not detect Sound Blaster .....' error msg during installat

For those who encounter 'Setup does not detect sound blaster audio in the system' error upon installing from the installation CD. You can try the steps below that work for me. It seems Windows have lock on to the sound card with an incorrect ID thus the installation CD are not able to correctly identify the card. Be sure to do a backup copy of the registry first incase something goes wrong since we are editing the registry.
. Go to Start-Run and type in 'regedit' to start the registry editor application.
2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\P CI.
3. You should see listing with 'VEN....'. Expand them by clicking on the + icon and then see if it's listed as unknown or Creative related stuff. Keep note of them.
4. Right click on those 'VEN......' listing that you have noted earlier and select full permission. Ensure that full control are selected. Now delete all those listed as unknown or Creative related stuff.
5. Exit registry editor and reboot. Try using the installation CD again.
Hope it hel
ps.
Message Edited by BadBoy on 05-22-2005 09:5 PM

I only have this problem when i try to install <A href="]Li'veDrvUni-Pack(ENG).exe[/url] ... That driver pack also says that the drivers from cd are the newest ... :S !

The following remoteapp program is not in the list of authorized programs.

Hi,
Iam in a pickle at the moment.
My RDS 2012 R2 environment was working successfully previously, arrived from holiday and it is not longer working.
My setup:
**RDS01 ( Session Host and Connection Broker Roles )
**RDS02 ( Web Access, Gateway and Licencing Roles)
The Problem i am facing is, after successfully login to the RDWeb page, lunching the remoteapp i get the following:
1st Get Certificate mismatch ( name in the certificate RDS02.mycompany.local is not trusted )
2nd Hit YES and the following message "Windows cannot start the RemoteApp program. The following RemoteApp program is not in the list of authorized programs: WinWord"
It happens whether i do connect externally.
Internally the SSO does not work ( i did check my certificate and it is installed )
If i run the script Set-RDPublishedName and change it from remote.mycompany.com to RDS01.mycompany.local
1st Certificate name mismatch ( requrested pc RDS01, name in the certficate remote.mycompany.com )
2nd Hit Yes and the app works
It happens whether i do connect internally or externally.
Any help will be very appreciated.
cheers
Elton

Hi Elton,
It sounds like the DNS lookup is resolving to the wrong ip address. When the RD Gateway (RDS02) looks up remote.yourcompany.com to connect to your broker/RDSH it should resolve to the ip address of RDS01, but it appears it is resolving to RDS02 instead.
I recommend you use Set-RDPublishedName to change the name back to what is was before (remote.yourcompany.com) and verify that your DNS settings are correct. For example, if you log on to RDS02 and try to ping remote.yourcompany.com it should try to
ping the internal ip address of RDS01, since that is your connection broker.
-TP

X-fi Extreme Gamers not in IRQ list, doesn't work at all.

9X-fi Extreme Gamers not in IRQ list, doesn't work at all.O Lo mates,
my specs:
Intel C2D E8500
Gigabyte GA-EP45-DS3R
Club3D ATi 4870 52MB
2GB OCZ
2 WD Raptors connected to onboard raid controller
X-Fi in PCI slot
my problem:
The X-fi isn't working as it should. It's not getting detected in bios / POST so it can ofcourse not be working in any OS (currently running Win7 7068
I used to own a AMD 2500 / Asus A7N8X-E deluxe, and it used to work, but when I upgraded to a C2D E6600 / DFI Infinity it only showed up 3 times in my IRQ list / OS. This ofcourse is to blame to Creative, because they dont care about the PCI standard and didn't implement IRQ resource sharing in the Extreme Gamer card. After upgrading to my current setup (listed above) it's still not working at all, even though I tried disabling all onboard devices I dont use, and manually mapped IRQ channels to the PCI ports so they wouldnt share.
The X-fi is fine, I recently put it in another pc with another brand motherboard, and it was detected instantly. Guess the guy who owns that pc had some luck with his motherboard don't feeling the need to share IRQ's at that particulair moment... its like Russian roulette.
Is there anything i can do to get the soundcard to work even though it doesn't implement the PCI standards and therefore in my opinion failed as a soundcard and as a brand as a whole?
Greats,
eXistenZ
Message Edited by existenZNL on 06-24-2009 02:34 PMMessage Edited by existenZNL on 06-24-2009 02:35 [email protected]

= Hey mate:
Havent seen your exact bios, but if you have a setting in it, called? reset [color="#000080" size="3">Extended System Configuration Data.
Then that might shuffle your bios, per se and then let that card be redetected. I used to use that on my systems when swapping one single part in order to get all the IRQs to shuffle around again, and give one to my card. Do you remember when the magic number to give to your Creative card was IRQ 5, DMA Low of , DMA High of 5, address of 220 and port of 330? Well that is how I used to get my system to shuffle my printer ports and modems in order to bump that sound card to get the correct addresses. Also check to see if the edges of your sound card are blackened. Wipe them with your fingers and see if there is an ashy burned residue. This will tell you if that card has been electrically damaged, or oily/dirty. Also the backlplates on some sound cards are slightly bent and your sound card will fit into its slot, but not all the way. A hair off and that card will be picked by your system every couple of boots.
Try this and let me know how it goes for you.

Why is InDesign CS6 not in the list??

Hello,
i have bought Indesign CS6 on the adobe.com shop. But the serial number from the mail they send me isn't working.
When I use the serial number he says: The serial number you entered is valid but there is no qualifying product present on this computer (translated from dutch).
This is probably because I only can select cs5.5 in the list with products and no cs6. Why cs6 is not in the list? Even after several times reinstall.
Help.....

It sounds like you purchased an upgrade. You will first want to enter your CS6 serial number. After which you will then be prompted to enter the serial number for your qualifying product. At that time you will want to enter the serial number for the software which you are upgrading from.

My mac desktop will not provide sound from internal speakers. when I go to audio devices window it only shows airplay. How can I get internal speakers back.

My mac desktop will not provide sound from internal speakers. When I go to audio devices window it only shows airplay. How can I get internal speakers back.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Ringtone problem, assigned ringtones not working

I realized that the phone would not ring assigned ringtones. I made numerous phone calls to tech support and spent hours with them troubleshooting this problem. We tried everything
When your ATT account has caller ID block, in order to unblock the number so people can see your phone number you have to enter *82 in front of the phone number in contacts. In one of the first conversations I had with tech support I believe I mentioned this and was told that it should not cause a problem.
_**It does,_ if there is anything at all besides the phone number under the contact the phone will not recognize that the number has an assigned ring tone.
Also if you have the same number in contacts twice for any reason, (maybe a contact and under favorites) you have to delete the duplicate or assign the desired ringtone to all contacts. Otherwise the phone will ring the default ringtone, not the one you assigned.
I hope this helps someone not to have to spend hours workig on this problem

Hey there Taralynn7,
It sounds like you have assigned ringtones to some of your contacts, but the customized tones aren't playing, and instead you get a default ring when they contact you. Any number of things can cause that issue, so I would recommend starting by quitting all the open apps on your phone, and then restarting it:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling

RINGTONE? NOT ON SOUND LIST

Similar Messages

Maybe you are looking for