Ringtones for all to use

*I live in Canada and I cant make ANY Ringtones at all. I called apple and asked why this was and I was told that they need to get special licensing from the music company. This is why some songs can be made into ring tones and some cant. He told me that they are working on getting more song out there, but its more of a sit and be patient. I asked if there is a list out there with all the songs that can be used as ringtones and he does not know of any. So I think that we need to help each other, If anyone knows of such a list post a link please. Or if you have found another way to get Ringtones on your IPhone (without hacking it) please let me know.
Happy New Years
General Disaray.

General21,
From what I can tell, ringtones are not available in the Canadian iTunes Store. If ringtones aren't offered on the Canadian store, there is not list that can be provided. The U.S store has a Top Ringtones list, found here: http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewTop?id=1&popId=22
I did find some App Store apps that offer ringtones, however. Just search for "ringtones" (without quotes) in the top left, and choose the link for Applications that appears.
One method of creating ringtones for your iPhone can be done using Garageband: http://support.apple.com/kb/HT1358
Hope this helps,
Raleigh

Similar Messages

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

N97: Can you set a ringtone for all unknown caller...

I just moved to a Nokia N97 from a Palm Treo Pro. So far so good, but one thing I cannot seem to find any information on is whether or not you can set ringtones for all unknown callers, like you can on a palm? This was one of my favorite features for palm phones.
If you cannot set a specific ringtone for all unknown callers on the handset itself, does anyone know of an application I can download that would enable this?
Thanks for your time!
Message Edited by lisadahl on 31-Aug-2009 09:48 PM

While you're waiting for that application. You can put everyone in a group and set specific tones for each group then the default ring tone will sound when unknown people call you
Show your appreciation. Hit that kudos button real hard

How Can I set Specific RingTone for one person and general ringtone for all?

Hello All,
I have a problem with ringtone. I want to set specific ringtone for manager in my 99 series ip phone. Customer needs to know when manager calls him, that is why he told me that he wants to set specific ringtone for Manager.
Thanks a lot
Bahlul

Hi Bahlul,
I don't see such a feature on CUCM where you can have a separate ringtone for a Directory number based on the calling party number. Even to have separate ringtones for different lines on the same IP phone you need to play with Distinctiveringlist.xml , but that too does not fit your requirement as it will always be the same ringtone for all the calls on that line. You may probably get this feature through some third party solution but i am not sure if it would be worth it for applying it on one phone only.
HTH
Manish

Material creation for All VIEW using BAPI Function modules

Dear All,
             I want to create materials for all views using BAPI F.Ms. By using BAPI_MATERIAL_SAVEDATA i have extended materials for for only specified views. now my requirement is to create Material with All views including Classfication view also. For this i found BAPI_OBJCL_CREATEFM.
         Tell me that shall i use both Fm's at time to create material.Will it work? According to my knowledge we need to create Characters first ,then we should assign this character to this class, then while creation of material we should select this class .
        so pls guide me the procedure to follow for both FM's .
Note : Pls don't suggest me LSMW OR BDC procedure.
regards,
Prashanth Maturu.

Hi prashanth,
U can use both the FM. using BAPI_MATERIAL_SAVEDATA u can create all the views and for classification view use BAPI_OBJCL_CREATE. before assigning class to material u hve to make sure that the characteristics are uploaded and is attched to the class using transaction CL03.
Regards,
Anil N.

2g data allowance in single line plan is only for 4g LTE or for all data using?

I got a single line plan and an iPhone 5s a couple days ago. I am confused the data allowance is for 4g LTE only or for all data using? Thank you!

Hello edsun1997
I would love to answer this for you. You have 2 GB's to use on our network this will start over at the beginning of your cycle. If you use Wifi and turn off our network, Wifi would not go against that 2 GB bucket.
JoeL_VZW
Follow us on Twitter @VZWSupport

Is it possible to mass change desktop wall paper for all users using WGM?

is it possible to mass change desktop wall paper for all users using WGM?

yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

How does select stmt with for all entries uses Indexes

Hello all,
I goes through a number of documents but still confused how does select for all entries uses indexes if fields are not in sequences. i got pretty much the same results if i take like two cases on Hr tables HRP1000 and HRP1001(with for all entries based upon hrp1000). Here is the sequence of index fields on hrp1001 (MANDT, OTYPE, OBJID, PLVAR, RSIGN, RELAT, ISTAT, PRIOX, BEGDA, ENDDA, VARYF, SEQNR). in second case objid field is in sequence as in defined Index but i dont see significant increase in field even though the number of records are around 30000. My question is does it make a differrence to use field sequence (same as in table indexes) in comparison to redundant field sequence (not same as defined in table indexes), secondly how we can ge tto know if table index is used in Select for entries query i tried Explain in ST05 but its not clear if it uses any index at all in hrp1001 read.
here is the sample code i use to get test results.
test case 1
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
      t2 TYPE timestampl,
      t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
            WHERE mandt EQ sy-mandt AND
                  plvar EQ '01' AND
                  otype EQ 'S'AND
                  istat EQ '1' AND
                  begda <= sy-datum AND
                  endda >= sy-datum AND
                  langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
            FOR ALL ENTRIES IN it_hrp1000
             WHERE mandt EQ sy-mandt AND
                    otype EQ 'S' AND
*                    objid EQ it_hrp1000-objid and
                    plvar EQ '01' AND
                    rsign EQ 'B' AND
                    relat EQ '007' AND
                    istat EQ '1' AND
                    begda LT sy-datum AND
                    endda GT sy-datum and
                    sclas EQ 'C' and
                    objid EQ it_hrp1000-objid.
*                    %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.
test case 2
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
      t2 TYPE timestampl,
      t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
            WHERE mandt EQ sy-mandt AND
                  plvar EQ '01' AND
                  otype EQ 'S'AND
                  istat EQ '1' AND
                  begda <= sy-datum AND
                  endda >= sy-datum AND
                  langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
            FOR ALL ENTRIES IN it_hrp1000
             WHERE mandt EQ sy-mandt AND
                    otype EQ 'S' AND
                    objid EQ it_hrp1000-objid and
                    plvar EQ '01' AND
                    rsign EQ 'B' AND
                    relat EQ '007' AND
                    istat EQ '1' AND
                    begda LT sy-datum AND
                    endda GT sy-datum and
                    sclas EQ 'C'." and
*                    objid EQ it_hrp1000-objid.
*                    %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.

Mani wrote:
Thank you for your answer, its very helpful but i am still nor sure how does parameter rsdb/max_blocking_factor affect records size.
Hi,
The blocking affects the size of the statement and the memory structures for returning the result.
So if your itab has 500 rows and your blocking is 5, the very same statement will be executed 100 times.
Nothing good or bad about this so far.
Assume, your average result for an inlist 5 statement is 25 records with an average size of 109 bytes.
You average result size will be 2725 byte plus overhead which will nearly perfectly fit into two 1500 byte ethernet frames.
Nothing to do in this case.
Assume your average result for an inlist 5 statement is 7 records with an average size of 67 bytes.
You average result size will be ~ 470 byte plus overhead which will only fill 1/3 of a 1500 byte ethernet frame.
In this case, setting the blocking to 12 ... 15 will give you 66% network transfer performance gain,
and reduces the number of calls to the DB by 50%, giving additional benefit.
Now this is an extreme example. The longer the average row length is, the lower will be the average loss in the network.
You have the same effects in memory structures, but on that layer you are fighting single micro seconds instead of
hundreds of these, so in real life it is rarely measurable.
Depending on table-statistics, oracle might decide for short inlists to use a concatanation instead of an inlist.
This is supposed to be more costy, but I never had a case where I could proove a big difference.
Values from 5 to 15 for blocking seem to be ok for me. If you have special statements in customer coding,
it #might# be benefitial to do the mentioned calculations and do some network tracing to see if you can squeeze your
network efficiency by tuning the blocking.
If you have jumbo frames enabled, it might be worth to be analyzed as well.
If you are only on a DB-CI system that is loopback connected to the DB, I doubt there might be a big outcome.
Hope this helps
Volker

ICM active -- NO CONNECTION for all AppServers (using TREX host names / IP

Hi Experts,
Our Basis team has set up new BWA Box for a Quality. When i went to a transaction "RSDDBIAMON" I am getting below error.
Q27: ICM active --> NO CONNECTION for all AppServers (using TREX host names / IP addresses). Configure ICM/TCM connection in SAP
RFC Connection is working. I have tested it in sm59. Can anyone help to understan where will be the problem.
Regards,

In TREX Admin, I was able to check ICM error and got IP address.. After this got to know host-name of the server is different from configured in ICM.

How to get a list of file paths for all files used in a project

I have a project in Premiere Pro CC which has a large number of bins. A sequence in one of these bins uses files from other bins. I am trying to find the locations of all each of the files used in the project.
1) Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
2) The video usage associated with each file in the project would help. However
1. I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
2. Video usage shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
3) I tried exporting the project to final cut pro xml. The path url gives me the information that I need. For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
4) I tired an export for speedgrade and all of the file names are there. However the paths are not.
Basically I want to find all of the files in the project and relocate them to a specific folder for that project. There's got to be a way to do this but I'm not seeing it ....

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems. The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems. However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later. The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to? Can anyone help please?
Thanks
Paul

Hi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

"playback failed" for all podcasts using ios7

I just updated to IOS 7 and when I try to play a podcast that I am subscribed to, I get "playback failed" for all podcasts. The odd thing is that if I am connected via wifi, it seems to work fine. If wifi is not there, I get that error.
I cannot seem to find a setting anywhere that gets around this.
Help!

See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

For all classes used in the alv reports.

we need the list of required classes used in alv reports this urgent .
please help me.

Hi Navid,
Check <b>SLIS Package/Dev.Class for node Classes</b>,
here u will find all required <b>classes for ALV including ALV Hierarchical,AVL Tree, ALV HTML.</b>
Classes.
CL_ALVHT_HTMLINPUT-> ALV: HTML Input (Control Proxy)
CL_ALVHT_HTML_PAGE-> ALV HTML Page
CL_ALVHT_HTML_TEMPLATE-> ALV: HTML Templates
CL_ALVHT_TAGSTREAM-> ALV
CL_ALVHT_UI_ELEMENT-> ALV: HTML User Input Element
CL_ALV_BDS-> BDS Access and Data Retention
CL_ALV_CHANGED_DATA_PROTOCOL-> Message Log for Data Entry
CL_ALV_DD_DOUBLE_LISTBOX-> Management Class for two D&D List Boxes
CL_ALV_DD_LISTBOX-> D&D List Box
CL_ALV_EVENT_DATA-> Changing Data Container for Events
CL_ALV_EVENT_TOOLBAR_SET-> ALV Context Menu
CL_ALV_GRAPHICS-> ALV Graphic (Integration with GFW)
CL_ALV_GRAPHICS_CU-> Customizing of ALV Graphics
CL_ALV_LISTBOX_DRAGOBJ->
CL_ALV_OI BDS-> Access and Data Retention
CL_ALV_TABLE_CREATE-> Dynamic Creation of ALV Data Table
CL_ALV_TREE_BASE-> Basis Class ALV Tree Control
CL_ALV_VARIANT-> ALV Variant Management
CL_GUI_ALV_GRID-> ALV List Viewer
CL_GUI_ALV_GRID_BASE-> Basis Class for ALV Grid
CL_GUI_ALV_TREE-> ALV Tree Control
Regards,
Raghav
Message was edited by:
Raghavendra L

Capture @@ROWCOUNT for all QUERIES using SQL AUDIT

I have a requirement where the customer wants to audit all SELECT queries made to a specific table and also capture
"No of rows returned" for these queries made to the table. I was able to capture various SELECT queries happening in the database /Table using SQL AUDIT, Wondering if anybody can suggest how to capture no of rows affected along
with it, Since we have numerous stored procedures in the system we wont be able to modify existing stored procedures.

Good day Vish_SQL,
There are several options that you can use, which fit different cases. for example:
1. Using extended events (My prefered solution for most cases like this)
2. Using profiler (older option)
3. Using view (with the same name as the table, and rename the tables related to the issue) instead of the original table, adding to the view a simple function or SP (CLR for example). the function return the
column value, but behind the screen write information to another table. It is a very rare case that you need this option, and I can't recommend
it.
4. using applications like GREENSQL which give another level between the application and the SQL Server. The users connect to the server but the server do not listen to remote connection but the external app dose.
In this case the app get the query and send it t the server (after security or monitoring if you need)
* it was much simpler if you want to monitor delete, update, or insert for example, since in those cases you could work with AFTER trigger.
** I highly recommend you to monitor the application that connect to the SQL Server rather than the SQL Server. if you can.
Check this:
http://solutioncenter.apexsql.com/auditing-select-statements-on-sql-server/
Ronen Ariely
[Personal Site] [Blog] [Facebook]

I want to create a SPECIAL ringtone for the iPhone using a Windows PC

I want to use the theme song of the television show "Big Bang Theory" as a ring tone. I bought the song off iTunes and found that I only want the first 20 seconds of it (the part you hear on television) then I want that part to REPEAT for the remaining 20 seconds of my 40 second ring tone. How can I do it?

Although this video tells me how to use a song as a ringtone, it doesnt tell me how to take the first 20 seconds of the song then REPEAT it, to create the 40 second ringtone (I want to hear the part you hear on television TWICE).

Ringtones for all to use

Similar Messages

Maybe you are looking for