'Ringtones' tab after connecting the device.
i know that one.
what i'm asking is how to get 'Ringtones' tab when device connected in.
Here i'll show you the page.
this is what i want.
tell me how to get it.
i had many edited ringtones & they are also ther in itunes .
mine is windows 7 & had itunes 10.5
wait another question after getting it if i sync. the ringtones then will it display on my iphone 4s?
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Similar Messages
-
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
than it says it'ss erase my iphone and sync with itunes library.
what should i do?It wil only erase the music and videos. Nothing else.
-
I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!
If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it). -
The latest version of itunes (10.2.2) freezes immdiately after connecting a device when trying to sync to ipod, iphone or ipad. The beachball just keeps spinning forever or until I force quit
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
After connecting the clients to start video chat using RTMFP , Can the server finish the video chat
After connecting the clients to start video chat using RTMFP , Can the server finish the video chat between clients regardless of clients' will ?
Hi,
I looked on this site http://portforward.com/routers.htm
It lists many routing devices both modems and routers.
I did not see the Surfboard you listed but that does not mean it does not route (It just means it is not in the list)
Your computer is getting the IP 192.168.1.3 which means a device somewhere between you and the internet is routing.
Most likely in System Preferences > Network for the connection method you are using you can see a "Router IP" (192.168.1.1 is most likely based on the IP you get)
Type this into to your Web Browser like you would Apple.com
You should get a Pop Up.
Hopefully it will tell what device you are now trying to Log in to.
This info may help in looking in the Port Forward list.
If not check all the Motorola devices listed and then iChat in the Next page.
The third page from the Link page I gave you will detail the default access info (IP and User ID and Password) for each device you visit.
You may find that there is a common User ID and password across the various devices and this may work for you.
At Random this one says admin and motorola as the User ID and Password. (others may say different)
Don't worry about the fact it says to set a Static IP at this stage Or the Port Forwarding info further down each page.
You will hopefully be now looking at the web pages stored on the modem.
They work like any other web pages with menu items and links to other pages.
Search all the menu items and link to see if the device has UPnP
It tends to be in different places on different routing devices but try Advanced or Admin as well as anything to to do with opening ports.
A Status page like the first pic on the second link page I listed may well tell you if it has UPnP enable or not (but this is not always the case)
Tell us what you find out or if you have some other routing device in between you and the Motorola Surfboard.
10:56 PM Monday; January 19, 2009 -
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".
Hi,
See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/
Also...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538 -
After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)
Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id -
I bought an Ipod touch Used, I connected to my PC and I wanted to restore it, but the restoration could not be completed, since my PC does not recognize my iPod or iTunes. On the iPod screen displays an image thatsays I need to connect the device to iTunes.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
S540 Wake up from Standby after moving the device?
Hy, I have a problem with my S540. It turns into standby after closing, but wakes up if I move the device. Is that normally? Can anybody prove that with ist own device?
Hey Zyzx,
I have seen this type of condition before in a USB connected printer. How do you have the printer connected to the Windows XP Home Edition desktop PC? (USB or Network connected)
If the printer is connected by a USB cable, then you may try a different USB port on the PC and uninstalling/re-installing the USB Controller on the PC.
To perform the uninstall/re-install of the USB controll follow the steps listed below.
Boot into Safe Mode on the PC
Click on the Start menu of the PC
Right Click on My Computer
Select Manage out of the list
Select Device Manager in the list on the left
Right click on the section titled "Universal Serial Bus controllers" and select Properties
Uninstall the section and restart the PC to perform the re-install
I will look into this issue more for you and get back with you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility. -
My Keyboard and Mouse freeze after connecting USB device
In the past few weeks I got this situation where my MacBook Air (13" Late 2010 model) would stop responding to the keyboard and trackpad after I connect a USB device (like an external hard disk, or even my iPhone).
I found one (quite inconvenient) solution: if I connect an external USB mouse and keyboard they work, and after a while the built in trackpad and keyboard start working again. But if I do not have an external mouse and keyboard around me, I am quite stuck and only a reboot fixes the situation.
Any idea what might be causing this, or if there is any solution? It is clearly a software issue, as the hardware can be returned to normal state after reboot.
Note: I have the latest OS - Mac OS X Lion 10.7.3 (11D50) and regularly update my software.I have the same issue, on the same model (late 2010 13" MBA).
I haven't been able to figure out a solution either. Strangely, I recently bought a USB external drive and it *never* causes a freeze upon connection. Only smaller devices (iPod, iPad, FitBit, USB stick) cause it. I need to reboot the computer with the device attached to be able to access it. -
Zen Micro Connection "the device is not connect
When I connect my Zen Micro in my computer the Zen Micro Media Explorer says that "the device is not connected. Please connect your Zen Micro to the computer" My battery is full. I read the instruction book and It said when you connect the Zen Micro in, Creative MediaSource or Windows Media Player starts up automatically... but nothing happens when I connect my Zen Micro. Please help.
<FONT face="Comic Sans MS" color=#ff0000 size=2>Hey, i have this same problem...well i did...im not sure :smileyindifferent:
<FONT face="Comic Sans MS" color=#ff0000 size=2>At first i followed the instructions on how to install the mp3 (micro) etc etc, i followed it to perfection. When it came to using the software on the disc, i found alot of problems, mainly that my Micro "apparently" was not connected, according to my Creative Media Source/Organiser etc.
<FONT face="Comic Sans MS" color=#ff0000 size=2>Anyway, after i downloaded loads of different updates etc, and basically fiddled about, i got WMP to recognise it!! BREAK THROUGH!!
<FONT face="Comic Sans MS" color=#ff0000 size=2>Alot of other ppl i know have had this same trouble as i and as loads of you are, so i would recommend using WMP, works fine, only downfall is I DON'T KNOW HOW TO MAKE PLAYLISTS :angry:
<FONT face="Comic Sans MS" color=#ff0000 size=2>As fussy as i am, this isn't good enough for me, i want the software to recognise it so i can take full advantage of my new Micro.
<FONT face="Comic Sans MS" color=#ff0000 size=2>So, i need advice, shall i quit while im ahead, or will someone gve me some help to resolve this problem?
<FONT face="Comic Sans MS" color=#ff0000 size=2>And if the later, what the hell shall i do?
<FONT face="Comic Sans MS" color=#ff0000 size=2>
<FONT face="Comic Sans MS" color=#ff0000 size=2>~Shaun~ -
My touchpad scroll was not working many times after i installed firefox 6. But it works perfectly fine in other browsers at the same time.
After some playing around, i found that this problem occurs only when a pdf is open in some tab (The scrolling works in pdf's tab but not in other tabs). Once that particular tab is closed, the scrolling starts working properly.Using similar scroll function on my netbook. To add to the above, I find that using scroll is actually causing the PDF to scroll rather than the tab I'm actually in.
Reader 9 is installed on my Win7 Starter. -
I purchased my MacBook Air from US in December 2013, my company paid for it, so it got listed under their account earlier. So I asked them to remove it from there account and then I added it back to my profile in January 2014. Then it was listed under My Products tab in the My Support Profile page. Later I bought Apple Care Protection Plan for this MBA, and registered that plan with my MBA's serial number and soon after that, MBA vanished from My Products. I thought it might take some time for it to get listed back again after adding the protection plan, but it didn't appeared for quite a long time and so now I am opening this support ticket.
Now whenever I try to add my MBA again by clicking Register New Product, I am getting "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID?" How can I get my MBA back into my profile?AppleCare does not cover accidental damage, but try taking it to an Apple Store and see what they say!
Maybe you are looking for
-
Remote Desktop Connection not working
I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look fo
-
Hiding Image field based on the page number in Adobe Form- Script
Hi Folks, I have a problem with the print form that I am working on. I need to insert an image of lines (OMR) based on the page numbers. For the OMR part, the first page will always have 4 lines as a image, the middle pages will have 3 lines as a ima
-
Why can I only paint straight lines in Photoshop CS6?
I am trying to paint something that I have wanted to for a while now, and Photoshop is presenting some troubles for me. I can not paint curves, and instead, only straight lines without pen pressure (Size, opacity, the likes.) The result of my efforts
-
Rounding off to 2 decimal places
Hi, I use "Double" for my calculations and since I am working with $$ ;-) I need to round it off at 2 decimal places. Any quick way to do this? or do I have to write some major code for that? Thanks
-
UWL Issue not working with HTTPS
Hi, The UWL is implemented and are in live for long long time in our company. Recently, we changed the Portal to be accessible via HTTPS as well and after chaging realized, none of the UWL worklist links are working. Worklist Items are Displayed w