Rio driver for labview 8.6 windows 7

Hi,
Can anyone let me know what's RIO driver version for labview 8.6 and windows 7 please?
thanks,

Hello Triple_H,
LabVIEW 8.6 was released prior to Windows 7, and as such this isn't a supported configuration- refer to this knowledgebase:
Windows Version Compatibility with LabVIEW
http://digital.ni.com/public.nsf/allkb/B972242574D4BB99862575A7007520CB
You'll need to move to a newer version of LabVIEW or an older operating system.  All versions of the RIO drivers are available here, with the supported operating systems listed:
ni.com/drivers search: RIO
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnav:ndr/q/RIO/
Regards,
Tom L.

Similar Messages

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • Hp driver for labview for hp8156a attenuator

    I am looking for a hp8156a driver for labview. There is not one posted in the driver section of this site. Thanks

    Here is a link to the programming manual. Section 8 shows the commands. It will take some work, but you can write your own drivers.
    http://www.home.agilent.com/upload/cmc_upload/All/opat0500.pdf
    Message Edited by unclebump on 07-12-2005 04:21 PM

  • HP 54501A - Instrument Driver for LabView v.7 or v.8

    Hi all,
    I'm looking for HP 54501A - Instrument Driver for LabView v.7 or v.8. I have NI gpib/usb controller installed, but cannot control the scope via Labveiw.
    The link I found at NI web site within drivers section seems to be broken so I couldn't download it!
    Please, anyone, suggest/help!

    The link you were given works for me. You can try it again. The given link brings you to a page where the CVI and LabVIEW drivers are listed. the direct link to the LabVIW driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9455659CE034080020E748... .

  • Need SPARTAN 3E board Driver for Labview FPGA 8.5 !!!!!! Thx

     HI!!I need the spartan 3e driver for labview 8.5(not for labview 8.6) for school useI try to download it from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
    but this link is dead now. Could somebody send this driver to [email protected] PLZ? Thank you a lot for all in advance
    Solved!
    Go to Solution.

    Hello,
    I'm looking for same (Labview FPGA 8.5 for Spartan 3E). But it isn't available on related url now. I'll be glad if someone can help to find driver.
    Best regards, 

  • IS CLIP supported by Xilinx Spartan3E driver for LabVIEW 8.6?

    IS CLIP supported by Xilinx Spartan3E driver for LabVIEW 8.6?
    For HDL interface node, the enable chain and multi clock domain is difficult to understand
    Solved!
    Go to Solution.

    Reidl,
    Thank you for your answer.  How do I uninstall my current version?  I have looked in "Add or Remove Programs," but I don't see anything under "Xilinx" or "Spartan."  I do see an entry for "National Instruments Software."  However, when I click "Change / Remove" I don't see any entries for the Spartan Board.
    I tried running the installation program, and I received the following message:
    The NI LabVIEW FPGA Support for Spartan-3E 1.1.0 installation has failed with the following error.
    You have a higher version of NI LabVIEW FPGA Support for Spartan-3E in your system.  You must uninstall it before installing this again.
    What is the latest version number?  How do I check what version I currently have?
    Thanks,
    James Carroll 

  • Is there compatible motion driver for LabVIEW 8.6?

    Is there compatible motion driver for LabVIEW 8.6? The latest motion driver seems to be 7.6 and it only support up to LabVIEW 8.5...

    If you buy LabVIEW 8.6, you will also get 2008 August Driver CD.
    NI-Motion 7.7 driver should be included in it.
    Or you can wait for a while.
    I guess NI will put on Web these days.

  • Aeroflex 2975 driver for LabVIEW 8.0

    Is there a way to convert the Aeroflex IFR 2975 driver for LabVIEW CVI for use in LabVIEW 8.0?  OR, is there a driver already developed for this? 

    Frank,
     I am using the LV 7.1.1 version of this CVI driver in an application I wrote. We should be able to recompile this for 8.0. Basically as I explained with no handshaking the instrument falls out of sync with the controlling computer. Basically the only GPIB command that is supported in that driver is *IDN?. So what I have done is after other  calls I use this command and compare the return string to see if it is what I expected. If not I use a popup telling the operator that a GPIB error occurred and to reboot the IFR to clear the bus. I also have instructed the operator to run NI Spy in the background...this seems to cut down the occurance of these errors. Another way to clear the bus that is faster and usually works is to stop the application, and read the bus using MAX until you see a timeout when there is no more data available( usually twice). Then rerun the application. Depending on the application this might be a work around though not an elegant one.
     Since the driver was converted from a CVI driver it uses the call library function node. This does not allow us to control the timing between the Write functions and Read functions. If you are doing something that is relatively simple you could use the TCL command set and VISA to write a driver. Just put a wait function between the Write and Read function and experiment with the timing until it looks like it won't fail. I've considered doing this myself but have been hoping that they will actually make the instrument 488.2 compliant. I am assuming that the actual error is that the data buffer is being read by the controller before the instrument is finished writing to it. The other scenario is that the data buffer might not actually be getting flushed every time it is read. I'm hoping my first assumption is correct or they have even more problems with the instrument.
     In January of '05' they actually enabled the following commands *SRE xx, *SRE? and *STB?. I recently wrote a simple vi to see what happens to the Status Byte after using IDN? command and reading the data buffer. The MAV bit begins logic low, then goes hi when the data is available. After reading the data (i.e. "IFR Systems, 2975.....) I again query the Status Byte. The MAV bit is still in a logic hi state. I sent screenshots of the front panel and block diagram as well as the .spy files to them. All was heavily notated and they said they were going to look at it. If anyone is interested in this I can post this code as well.
    Using LabVIEW 2010SP1 and TestStand 4.5

  • Looking for HP 5371A driver for Labview 6.1?

    want to communicate with HP5371A by PC over GPIB port

    I think that device is too old for finding a driver for labview. If you have all the GPIB command, it's easy to program. I made it for another type of instrument.
    Benoit Séguin
    Software Designer

  • Need a HP3421A native driver for labview 5.1

    Hi,
    I'm looking for a native HP3421A driver for labview 5.1. Of course I searched in the "Instrument Driver Network" but I foundd only drivers for labview 6.0 and 7.0 or greater.
    According to this document: http://www.ni.com/pdf/manuals/321691a.pdf#search=%22labview%204.x%20hp3421a%22 there is a such driver for labview 4.x.
    Any idea where I could find this driver for labview 5.1 ? A haven't any "Instrument Driver Library CD-ROM".

    hi there
    the driver he is searching for can be found here (LV 7.0): https://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E969E659CE034080020E74...
    the driver uses the old school GBIP functions, so it should be possible to downgrade it down to LV 5.1. do downgrade open the "HP 3421A Example.vi" and choose
    File->Save with options->Save for previous. 
    since you only can downgrade to the next prior version of LV you need a ladder of LV versions, but i'm sure that if you ask here you'll find someone who can do this for you.
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit

    Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit? Help!!!!

    hi there,
    Most of the A200 series makes use of this video card chipset.
    [Intel(R) Graphics Media Accelerator Drive X3100|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml&sliceId=&dialogID=57594450&stateId=1%200%20 57598302]
    Hope this will help :)

  • Problems with driver for network after installing windows.

    Hi. I have recently installed Windows 7 on my mac pro (from ultimo 2012). I've used boot camp for the installation. However it did not install the driver for my network. How can I get the driver??
    I hope there are someone who can help me.

    Hello Becky,
    I performed all the windows xp updates when I installed xp.
    Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
    I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
    I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
    Thanks for your help,
    Sergio
    Attachments:
    Serg_usf_Screen_Shot.doc ‏550 KB

  • Need spartan 3e driver for LabVIEW FPGA 2011

    Hello,
    I'm looking for Spartan-3E driver for Windows 7 LabVIEW FPGA 2011.
    Thank you

    Thank you for all the helps. I do appreciate that.
    By the way, I'm wondering the latest driver on NI is used for Labview FPGA 2012 or 2012sp1?
    Just in case our department would purchase the latest version of Labivew in the near future.
    Thank you again and have a nice day.
     

  • Epm2000 driver for labview 8.5

    I'm trying to open up the EPM2000 driver from molectron's website, but it is too old. Would anyone have a version that has been converted to 8.5 or something that 8.5 can open? Thanks.
    Solved!
    Go to Solution.

    Hello Steve,
    The LabVIEW VI’s that Coherent has attached on their website are for LabVIEW version 4.01. This version was released by NI in 1996, and is not compatible with Windows 98, NT or later. Therefore the VI’s are not usable.
    I would go ahead and contact Coherent to see if they have a modern (LV 7.1 or 8.x) version of the VI’s in question. They probably do since they are still advertising the EPM2000 and selling is as “new”.
    I hope this helps
    Message Edited by DjDaveNI on 11-03-2008 11:22 AM
    David G
    Sales Engineer - SE Michigan & N Ohio
    National Instruments

  • Need driver for iPod video and Windows Vista

    I had an iPod video and it synched no problem to my computer. There was a hardware issue inside the iPod so i sent it back and got a new one. Now when I connect it to my computer, it brings up the looking for a driver window and says it can't find it. Its only been a week since it worked fine.. I don't know if there is an issue with the new iTunes or what but has anyone had any experience with this issue or can simply tell me where to directly download or find the driver?

    I too have had a problem with needing a driver for ipod. My ipod was working fine, then my computer stopped recognizing the ipod. It says it needs a driver for the ipod and I can't find one anywhere...need help..please

Maybe you are looking for

  • Can you transfer purchases from one account to another?

    My parents created an Apple ID using our HOME E-MAIL and I've been using that one since I first used iTunes. Now, I have MY OWN e-mail address and I want to use that one now. I want to know if there's a way to TRANSFER ALL the purchases I've made wit

  • Scheduling lines In MD04 - MDBS/MD41

    Hı PP Guru's I have a problem with MPS - Total planning run. In our company when we run MPS (in t.c. MDBS ) mrp does not create scheduling lines for some external procured materials. But if we run mrp for one material in t.c. MD41 it creates scheduli

  • Powershell will not update-help

    Update-help doesn't work. Update-help -sourcepath "D:\update help" also doesn't work. I manually downloaded the files and put them in that folder since the live update fails, but even that won't work. Pasting error message: "PS C:\WINDOWS\system32> U

  • Is there a way to find my iPhone 4s if I did not download the find my iPhone app?

    Is there a way to find my iPhone 4s if I did not install the find my iPhone app?

  • Query about XAResource.end() API in JMS context

    Hi All, I have a small query regarding the behavior of an XAResource supplied by a JMS server. Suppose I start a transaction using XaResource.start() method and I create a publisher and registered durable subscriber on the XASession that supplied the