Ripped a CD to iTunes, it is showing up in "My Music" but when I sync with my 80gb Classic the ripped CD is not syncing even though other changes I made are

Ripped a CD to iTunes, it is showing up in "My Music" but when I sync with my 80gb Classic the ripped CD is not syncing even though other changes I made are
Have checked device sync settings and it is entire music library and their is plenty of space on ipod to accommodate - have restarted both itunes and the computer and disconnected and reconnected ipod to no avail.
Running itunes on Window machine under W8.1 and ipod software is 1.12

Thanks planb77. Your instructions worked but I had to do a little more than you stated. I did not realize that transferring files to a new computer was not enough. When the iPod synced I was told I needed to "authorize" my new computer to get my iTunes purchases to sync to the iPod. So after the initial sync, I ejected and disconnected the iPod, went into the iTunes store, set up "home sharing" and then authorized the new computer. When that was done I reconnected the iPod and was able to sync all my books and music. The only thing I couldn't do was rename the iPod as iTunes never asked me to. Is there a way to rename it after it has been set by iTunes as "owner's iPod"?

Similar Messages

I just got my iPod touch, I updated m iTunes and my iPod is still not showing up on iTunes, its giving me the iPod can't be used because the required software is not installed even though my iTunes is up to date

I just got my iPod touch, I updated my iTunes and my iPod is still not showing up in iTunes. It is telling me the required software is not installed even though my iTunes is up to date

http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

I rented a movie on my Apple TV through iTunes. It shows that I rented it, but when I go to play it it there was an error, try again later. I have tried later, and later over days but get the same message!

I rented a movie on my Apple TV through iTunes. It shows that I rented it, but when I go to play it it there was an error, try again later. I have tried later, and later over days but get the same message! everything else plays, why not the movie (Maze Runner)?

What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet

I updated my ipod Touch 4g directly on ipod using wifi. on itunes too it shows ios 6.1.2, but when I try to restore it, itunes downloads the software again. What can I do now?

I updated my ipod Touch 4g directly on ipod using wifi. on itunes too it shows ios 6.1.2, but when I try to restore it, itunes downloads the software again. What can I do now?

Let the computer/iTunes download it. That is how Apple has it set up. When you restore via iTunes the IOS is reinstalled on the iPod. Thus, it needs to be on the computer.

I download songs, vedios on ipod model no. MA978ZP through computer but ipod shows nothing it shows 0-songs, 0-vedios but when i plug with the computer it shows everything but when i unplug ipod nothing shows

i download songs, vedios on ipod model no. MA978ZP through computer but ipod shows nothing it shows 0-songs, 0-vedios but when i plug with the computer it shows everything but when i unplug ipod nothing shows

Have You used iTunes or did you just put files on ipod disc???
Try downloading new iTunes, and try with restore if nothing hapens!

JSP pages are not refreshed even though I change the code!

          Hi,
          Just wanted to ask that even though I make changes in some of my
          JSP files, the changes (e.g. hyperlink properties) are not recalled by the browser. This is happening even though I open a new browser and re-start the Weblogic server. I had same problem with Weblogic5.1. However, this does not happen always: sometimes, when there is a change in the file, Weblogic recompiles it and the changes are implemented. Thanks for your help!


1) Check the date/time of the .jsp compared to the .class generated for it.
          You could have a mismatch between the clocks on multiple machines.
          2) Delete the temp deployments directory to force WebLogic to rebuild
          those.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com
          +1.617.623.5782
          WebLogic Consulting Available
          "abuislam" <[email protected]> wrote in message
          news:3a1e0181$[email protected]..
          >
          > Hi,
          > Just wanted to ask that even though I make changes in some of my
          > JSP files, the changes (e.g. hyperlink properties) are not recalled by the
          browser. This is happening even though I open a new browser and re-start
          the Weblogic server. I had same problem with Weblogic5.1. However, this
          does not happen always: sometimes, when there is a change in the file,
          Weblogic recompiles it and the changes are implemented. Thanks for your
          help!

I want to be able to sync my iPhone 5 to my new iTunes library (new computer) and erase old music. When I connect my iPhone I have no option to "erase and sync."

So I have the iPhone 5. My old computer crashed so I ended up purchasing a new computer and re-installing and downloading all my old music and new music.
When I connect my iPhone to my new computer I can sync music but the old music still remains on my iPhone as well as the new music.
There's a lot on the phone that I don't want anymore but I can't seem to figure out how to erase it.
I don't want to restore the iPhone so I don't lose all my old messages and so forth.
I have all of the latest updates for the iPhone and well as iTunes.
If anyone has any answers to help that would be awesome!
Thanks.
- Jordan

Hey there,
It sounds like you are not getting the prompt to erase and sync your device. This indicates to me that Manual Syncing was enabled on the original iTunes Library, and becuase of that it is also now enabled on your new computer.
This is changable in the Summary tab of iTunes when you have your device selected, and this article will help you do that:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
Configure iPhone, iPad, or iPod for manual management
To manually manage the content, follow these instructions:
Connect the device to your computer.
Open iTunes.
Select your iPhone, iPad, or iPod. If your device isn't visible in the upper right corner of the screen, choose Library.
Click the Summary tab and select "Manually manage music and videos."
Click Apply.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Ipad will not synch to iTunes. States need newer version of amds, but when check amds it states I have the latest version

Hi, eventually managed to install latest iTunes on laptop with windows 7 32 bit, but when I connect my ipad it states that I need a later version of amds and to uninstall this and iTunes then re-install iTunes. Tried this, but no-luck.
I've checked the driver in the device manager and when I click properties and search it states that I have the latest version.
This is driving me insane!
Any help appreciated.
Thanks,
Any

Have you run windows update? That could prevent iTunes from properly installing. Also, try with your antiVirus and firewall disabled. What version of Windows are you running?
OS X is the operating system on the Mac.
Message was edited by: ssschmidt

I have a new computer and have downloaded some new CD's to my music Library. When synching the new songs will not download even though there is abundant room on the Ipod and the new songs are checked. Could this be a Windows 8 issue?

I have purchased another computer with the Windows 8 OS. When trying to synch the Ipod to capture some new music I have recently downloaded, the new songs will not show up on my IPod even though I have checked each one to synch. Any ideas?

I have a syncing issue involved with putting music on my iphone i am also using windows 8 so who knows?...

When using Firefox and Bing, auto search suggestions will not populate even though all options for it are enabled.

If I try to perform a search using Firefox as my browser, and Bing as my search engine, auto suggestions will not populate. I can use other search engines with Firefox and they work, and I can use Bing in other browsers and it works.

If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]
If security software issues can be ruled out, you can also reset Firefox and check.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

TS3356 I have compiled my movie and I downloaded it into iphoto. I then transfered it to imovie. The movie shows fine, but when trying to export it to facebook, the share menu does not highlight. Any help would be appreciated.

I have compiled my movie and I downloaded it into iphoto and then transfered it to imovie. The problem is that the movie plays fine, but will not highlight on the

You may be attempting to Share (export) the movie from the Event Library. You need to create a Project, drag clips (or segments of clips) from the Event to the Project, then use the Share menu to export the Project. Movie clips can't be exported directly from the Event. Clips you add to a Project reference (point to) the clips in the associated Event (or Events).
For more information, see the following iMovie Help topics:
Start a new video project -
http://help.apple.com/imovie/#mov3a61ee67
Add video to a project -
http://help.apple.com/imovie/#mov3a62377a
The Help topics are also accessible from within iMovie. Click on the iMovie menu item "Help>iMovie Help".
John

Rented a movie on iTunes, still had 27 days till it expired but when loaded it to watch, said it had expired. Was not able to watch movie on trip. Later on, came back as being able to watch movie. What is happening here?

I have an iPad 2. So does my wife. We recently went on a trip and downloaded movies to watch on the plane. My wife watched 3/4 of her movie and then fell asleep for an hour. When she went back to watch the remaining last quarter of the movie, it said it had expired. It also said that all the other movies that she had downloaded within the past 2-3 days had expired. I had a similar problem with a movie I rented. I went to view it and it came up and said it couldn't load the content and then said the movie had expired. I wasn't able to watch the movie on my flight which was quite annoying. Since returning home later in the day, I still had it saying it was expired, but now it is coming back and saying I have 27 days (which is correct). What is going on here? Someone at the apple store in NYC said to close the app but I find I don't even know how to do that anymore with the new version. Used to be you double clicked on the button and then got a minus sign which allowed you to close the app. It doesn't do that anymore. I also tried turning the iPad off for at least 5 minutes and trying it again and that didn't work either. Anyone else had this problem? Can anyone tell me why this is happening?

force quit app. double click home button and slide app up and off page
Peace, Clyde

Skype not calling even though other users are online

When I try to call someone online I click the video call button, but it doest ring. Neither after restarting Skype and with different users. Please let me know how this can be fixed

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

I just got a new computer. I have downloaded iTunes and authorized it. It shows my apps and music but says something about "downloading all". Do I have to download everything on to this new computer or is it already in there? I need to sync my iPad too.

I just got a new computer. I have downloaded ITunes and authorized it. It shows my apps and music, but says something about "downloading all". Do I have to download everythingon to this new computer or is it already in there? I also have an iPad that I need to sync. Is there anything special I need to do with the new computer before syncing the iPad?
Any help would be greatly appreciated,
Issy2090

Your past purchases are not on the computer. By choosing download all, those purchases will download to the computer.
Once authorized to your iTunes account you can control the computer.
When syncing the iPad the first time you will get the warning " this iPad is synced with another computer, syncing will erase all contents and replace with the contents of this computer"
Say yes, this is what you wan to do.

Ripped a CD to iTunes, it is showing up in "My Music" but when I sync with my 80gb Classic the ripped CD is not syncing even though other changes I made are

Similar Messages

Maybe you are looking for