Ripped music in library disappeared when I replaced original Nano with new iTouch

I had an original 2Gb Nano that Apple replaced with a new 8 Gb iTouch a few months ago. When I synced the new iTouch with iTunes, all of the ripped music I had in the library that was also on the original Nano disappeared from the library. How do I find this music on my computer (same one I was using with the original Nano) and get it into the iTunes library once again? Thanks for any assistance!

Ok, it magically came back. :? I really don't know what happened, but I'll leave this topic open for a day in case anyone eles is having a similar situation and someone would be kind enough to come in here and explain either that a) I'm more technologically impaired than the majority of the population under the age of 10 or b) this is a common thing and this is what happened. . .so I don't get ticked off the next time it happens.
Message was edited by: SmilinSweetpea

Similar Messages

My music on iPone disappeared when I synched my phone and computer. I uploaded all 32 CDs again to computer. It will not synch the music to iPhone. HELP

My music on iPhone disappeared when I synched my phone and computer. I uploaded all 32 CDs again to computer. It will not synch the music to iPhone. HELP

Some other things to verify:
On the summary tab of your iTunes sync settings check "Sync only checked songs and videos"
In your music library check all the songs you want to sync to your phone
Make sure there are no exclamation points next to any of the songs you want to sync to your phone
Be sure to authorize your computer for all Apple IDs used for any purchased music you want to sync to your phone (in Store>Authorize This Computer)
Then make sure you have checked Sync Music on the Music tab of your iTunes sync settings and sync your device.

Music in library, why are some songs not marked with cloud?

Music in library, why are some songs not marked with cloud icon?

Welcome to the Apple Community.
Where exactly are you looking and what do they look like, there are several iCloud icons used in iTunes.
Maybe a screenshot.

All navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included Wikipidia, news(with sub-options LA times, NY times,BBC etc), YouTube, mail & others. how do i recover previous version?

all navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included wikipedia, news(with sub-options LA times, NY times, BBC etc),YouTube, mail & others. how do i recover previous version?

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

I have a spark textinput, this textinput is stuck and wont disappear when poping or pushing to a new view any idea ?

i have a spark textinput, this textinput is stuck and wont disappear when popping or pushing to a new view any idea ? also sometime this textinput and when scrolling is stuck in a certain x-y position and do not move with scroll
below is my code:
<s:BorderContainer borderVisible="false" backgroundImage="@Embed(source='../assets/BGNotifications.jpg')" backgroundImageFillMode="scale" width="100%" height="100%">
    <s:Scroller id="homeScroller" y="0" pageScrollingEnabled="false" name="homeScroller" height="100%" width="100%" horizontalScrollPolicy="off" verticalScrollPolicy="on" skinClass="Skins.HMobileScrollbar" >
        <s:VGroup width="100%" horizontalAlign="center" verticalAlign="top" gap="0">
            <s:VGroup horizontalAlign="center" paddingTop="45" paddingLeft="10" width="85%" height="100%" verticalAlign="top" gap="0">
                <s:TextInput id="txtUsername" width="{278 * txtRatio}" height="{40 * txtRatio}" borderVisible="false" color="#575757" focusColor="#C42828" textAlign="left" fontStyle="normal" maxChars="200" styleName="{MystyleAccordingToWidth}TextBox{resourceManager.getString('resources','ImageP ath')}" ></s:TextInput>
            </s:VGroup>
        </s:VGroup>
    </s:Scroller>
</s:BorderContainer>

Hi, it sounds like you are running into a known issue with a mobile app using the spark textinput (assuming its mobile as you are referring to piping and pushing views)
The kind folks over at Flexicious have provided a solution to this problem
http://blog.flexicious.com/post/Scrolling-Issues-With-TextInput-for-Flex-Air-Mobile-Native -StageText.aspx

Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help.

Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help

Before installing a new drive - it is generally better to install it in a external usb enclosure and connect it to your Macbook so you can format/erase the new drive and make an exact clone of the drive you wish to install, unless you plan on doing a clean install.

When is Apple coming out with new software for ipad 2?

When is Apple coming out with new software for ipad 2

varjak paw wrote:
Perhaps if you start a thread detailing the problems you're having, someone can help you sort them out now rather than you waiting for some future update which may or may not address your issues.
Regards.
Like this one:
https://discussions.apple.com/thread/3390134
The Music app is ridiculously messed up ... if you use it enough, you will come across these issues which can only be addressed by an iOS update.

When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
2010 check all my four e-mail accounts without manually click on my accounts?
Sincerely
Ketil Hothorp

Hello Ketil,
Good Day...
Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
Regards,
Praveen

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

I am trying to load my library on the new computer but it will not let me import. the shared library disappears when i shut the original computer off.

I am trying to load my library on the new computer but it will not let me import. when i shut off the old computer the shared library disappears.

Yeah... that's exactly the way it is supposed to work. Sharing the library does not move it anywhere.
To move the library to the new computer, copy the entire iTunes folder from the old computer to the new computer.

My folders disappear when I sync my iPad with iTunes

I have about 290 apps on my iPad - too many for the 11 screens allowed. I organized them into folders in iTunes (took me a couple of hours) so that I could see all my apps and find them more easily. When I synced my iPad with iTunes, they all disappeared. I'm running verion 4.3.5. HELP!!!

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Just replaced my nano with the new itouch. Easiest way to re-sync?

Guys-
I'd like to be able to switch from my Nano to my ipod and simply import all my songs (Apple purchased and cd's and podcasts) from my Nano into my new itouch. What's the easiest way to do this?
Alternatively, can I still keep the same music on both my Nano and my itouch? I mean, I purchased both devices and I purchased my music and it's still on my same pc, right?
Thanks in advance for your help.

Hello,
You can certainly sync multiple devices to one iTunes library. iTunes should be able to tell the difference between devices, to maintain differences in name, syncing preferences, etc. When you connect the touch, it should behave similarly to the nano, in that you can have iTunes sync everything in the iTunes library to it for you.
CG
Message was edited by: CasperGemini

How do I move music from itunes store for an old ipod to a new itouch device

I just bought a new itouch, and wanted to transfer my music from itunes to new device. do I just plug in and go or will it be a security issue?

That's basically what you do...
Connect the iPod and select it in iTunes. If the iTunes sidebar is not showing, from the iTunes menu bar, under View, select Show Sidebar. The iPod should appear in the sidebar, under DEVICES. Click on it to select it.
With the iPod selected in iTunes, there is a row of buttons toward the top, starting with Summary. Click on Music next to Summary. This the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. If the iTunes music library is small and fits completely on the iPod, you can choose to sync Entire music library. Then click Apply. With this setting, everything in the iTunes music library syncs to the iPod. Whenever you make a change to the iTunes library, such as adding new songs, iTunes automatically updates the iPod with the same changes, the next time it is connected (or when you click the Sync button). If this works for you, you don't have to read the rest.
Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. A convenient way to use this setting is to create a new playlist in your iTunes library. You can call it "iPod Songs," or whartever you want. From the iTunes music library, add the songs you want on the iPod, such as those iTunes Store purchases, to that playlist. Back on the iPod's Music screen, find "iPod Songs" under Playlists, and select (checkmark) it. When you click Apply, the songs from your selection sync to the iPod. Going forward, when you want to update the songs on the iPod, just update that playlist in your iTunes library (add/remove songs). The iPod does not need to be connected. The next time you connect the iPod (or when you click the Sync button), iTunes automatically syncs the same changes to the iPod.

Can't replace old text with new text in a text box

Hello everyone. This is my first time posting in the forum, so I'm hoping this works out well. We recently purchased a few copies of Adobe Acrobt X for the office, and one of the users is having an issue with editing text in a field. She can type new text into a box, but when she goes back to replace that text with something else, the old text stays. New text appears on top of the old text, and you can see both. Is there a way to simply highlight the old text, delete it, and then replace it with new text? Thanks in advanace for your assistance. I understand this might be confusing, so let me know if you have questions.
Thanks,
Dan

You have to use the text touchup tool (there is a new name like text edit tool in AA X) to edit such text. It sounds like you are using the typewriter tool or something like it. Text editing in Acrobat is not for the weak at heart. It can be very frustrating and is not recommended except for very minor changes. If at all possible, you should edit the original and just recreate the PDF.

Ripped music in library disappeared when I replaced original Nano with new iTouch

Similar Messages

Maybe you are looking for