...ripping DVD material and saving as full movie...

...i've downloaded Mac the Ripper DVD extracting software but can't quite figure out how to extract the material as a full movie file( with audio) to re-edit as a clip that will be used in a project. I imported the VTS folder into FCP but not all the files were there and the video that was imported had no audio. I have full copyright from client and the DVD is NOT write protected. It's a archiving project of television commercials that are recorded onto VHS and DVD. anyone familiar with this technique? i would appreciate feedback. Thanks

Mmm... lots of Ripping these days...
You will want to use Mpeg Streamclip which you can
download HERE which is more suitable for
extracting and converting the files from the DVD, to
a format that can be used in FCP...
You can import the files you have ripped from
MactheRipper, and it will transcode them into a
format of your choice.
It's free, and simple to use.
Mmm... lots of Ripping these days...
You will want to use Mpeg Streamclip which you can
download HERE which is more suitable for
extracting and converting the files from the DVD, to
a format that can be used in FCP...
You can import the files you have ripped from
MactheRipper, and it will transcode them into a
format of your choice.
It's free, and simple to use.

Similar Messages

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

Getting Ripped DVD Video and Audio Into Encore

Do you have previously authored DVDs that need rework? Do you want to add menus with greater impact and functionality? Do you want to add some additional program or supplemental material? Does a client want their product demo DVD to be updated to reflect the capabilities of the new and improved version, but the source files no longer exist? Using Adobe Encore DVD and a freeware utility called DVD Decrypter (DVDD), you can accomplish this quickly and easily.
Disclaimer: I do not support the illegal copying and/or distribution of copyrighted works. The authors and distributors of the software I use have made it clear that they do not support illegal copying. This guide is intended solely to assist you in ripping and copying DVD video to which you have the legal rights. Any use of this guide to infringe the copyright of someone else’s intellectual property is prohibited.
This guide is based on Adobe Encore DVD 1.5.1 and DVD Decrypter version 3.5.4.0. Let’s Begin!
Place the DVD to be ripped in your DVD drive and launch DVDD. If you have more than one drive (e.g., a DVD-ROM and a DVD burner) make sure the one with the disc is selected in the Source dropdown list in the main program window. Now we need to set up DVDD to extract video in a way that is “Encore friendly”. This is the toughest part of the whole exercise. Click on the Tools menu item and choose “Settings…”.
Settings
General Tab: You can leave these set at their defaults if you like. Personally, I specify a custom Default Destination. I put my ripped video assets all in one place anyway, and having a default destination means I have one less thing to do when I rip a DVD.
IFO Mode Tab: Make sure that “Select Main Movie PGC” and “Enable Stream Processing” are checked. “Uncheck Suspect Cells” is probably a good default safety check. If your hard disks are formatted as NTFS, set File Splitting to “None”. I leave “Copy IFO File” checked with the default sub-items checked. Make sure that “Patch M2V Timecode” is unchecked. The items in the Create Additional Files section are purely optional. The author of DVDD has been kind enough to list which programs need which files; notice that Encore DVD isn’t listed as needing any of these extra files. I do keep the “Stream Information” box checked. DVDD generates very informative file names, but I like to keep “Include PGC Number” under File Names checked. Be advised you will get some lengthy file names after DVDD is finished ripping.
Stream Processing Tab: Since we enabled stream processing in the IFO Mode tab, we need to tell DVDD how to process those streams. To save yourself time and confusion later, check the “Convert PCM to WAV” box. Earlier versions of Encore required a Demuxed audio stream and a Raw video stream. Encore 1.5.1 can accept either type of video stream (Raw or Demuxed) but it does still require a Demuxed audio stream. However, I still recommend using Raw video and Demuxed audio, if only because it seems to be somewhat faster to process in DVDD. This workflow is also backward-compatible with earlier versions of Encore.
So let’s set up the Stream Processing tab now. In the Demux box, enter “0x8? 0xA? 0xC?”. This ensures that all audio streams in the selected PGC, whether AC3, PCM or MPEG will be set to Demux. In the Raw box, enter “0xE0”. This ensures that the video from the selected PGC will be set to Raw.
Additional Notes about the Stream Processing Tab:
1. For those of you asking the question, “What the heck is a PGC?” it’s just DVD-speak for the titles in a DVD project. And I’m not talking about the opening or end credits, either; I’m talking about the titles that result, for example, from the timelines you create in an Encore DVD project. There is a subtle difference between a PGC and a VTS (title set), but that's not important right now.
2. Happily, recent versions of DVDD create a WAV file after ripping that will import directly into Encore. Versions prior to 3.2.0.0 would create a WAV file that had to be imported to, and exported from, a sound editing program like Adobe Audition, Goldwave or SoundForge before Encore would recognize it.
Events Tab: For convenience sake, I recommend setting “Set Program Mode” in the Startup section to “IFO”. That way, whenever you launch DVDD, it will look familiar to you. You may safely ignore all of the other tabs in the Settings dialog.
Ripping
1.Under the Input Tab of the main program window, select the PGC you want to rip. You can only do one at a time.
2.Switch to the Stream Processing Tab. Verify that Enable Stream Processing is checked.
3.Check or uncheck any or all of the video and audio streams that are listed. Highlight each one to verify that all audio streams are set to Demux and the video stream is set to Raw.
4.If you didn’t select Default Destination in the General Settings Tab, then you need to tell DVDD where to put the ripped files now.
5.Click on the big DVD-to-Disk icon.
6.DVDD will announce, quite loudly, when it has finished. At that point you can rename the files or import them as is into Encore.
I hope you find this guide useful and that it helps you get the most out of your investment in Adobe Encore DVD.
Guide © Jeff Bellune 2005

OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
1) Read video/audo files from a DVD that we created
2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

Can apple tv and roku access same ripped dvd movies

Had 2 roku's. Like 'em.
Ripped dvd's and stored on external. (about 150 movies)
Just bought the new apple tv
Do I now need to import all of the already ripped dvd's into itunes library in order to watch them on my apple tv
(thus creating another separate file)
Or perhaps if they were all in itunes library, could roku access them ?
Maybe there's no way around this... but using roku / plex worked well and it was easy to get artwork etc
I did duplicate / import a couple movies into itunes. Get artwork - doesn"t seem to work for dvd ripped movies ?
Nature of the beast i'm guessing.....
Any advice / direction appreciated.
Thanks

You should be able to stream the video directly to the apple tv via itunes, without copying and creating another large file.
Just drag the movie files to your itunes. It will take a few seconds and will "import" the movies. Once created, you can right click the movie in itunes and then select get info. from there, you can give custom information, and even assign an icon or picture for the movie. Look on line and you should be able to find dvd covers for most movies.
I do this all the time with my movies and also tv shows.

Short way to generate a DVD, saving a Qucktime-movie

I have converted a VHS video cassette to a file with .dv extension. Unhappy there where two movies on the tape, so I had to open the .dv with QT (I thought to have to open it....), and copied both parts into new players and saved it as movie.
This lasts for a long time, and the resulting files are in size both longer than the former result of converting...
Is there a better way to divide a file into parts?
Thank for help,
Karl

Have you tried editing the .dv file using iMovie? Cut out what you don't want and send the file to iDVD.

Ripping DVD's to iPhone 4.......

I am fairly new to ripping DVD's and was suggested to use Handbrake software. I figured out Handbrake currently is not compatible with iPhone 4 (looks like some mods need to be done to some folder files to do this). I recently tried Daniusoft and it's one you have to pay for, but I tried the free trial and it has a stupid watermark on the whole video. Also the converted file was 1.7Gb. To me that seems huge for a converted file for my iPhone. I am hoping to find free software and know that I might forfeit qualty for this. Any help or suggestions would be appreciated. Thanks!

tmenold wrote:
I am fairly new to ripping DVD's and was suggested to use Handbrake software. I figured out Handbrake currently is not compatible with iPhone 4 (looks like some mods need to be done to some folder files to do this). I recently tried Daniusoft and it's one you have to pay for, but I tried the free trial and it has a stupid watermark on the whole video. Also the converted file was 1.7Gb. To me that seems huge for a converted file for my iPhone. I am hoping to find free software and know that I might forfeit qualty for this. Any help or suggestions would be appreciated. Thanks!
Can't really help you with software but I will say that the file size for the movie doesn't sound huge. I just checked the sizes of the digital download movies I have that were "free" with the purchase of Blu-Ray/DVD combo packs and they are in that range. One specific movie (Sherlock Holmes) is 1.79 GB and 128 mins long.

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

How to rip DVD to Sansa/iPod/iPhone/PSP/Zune and other MP4 and MP3 Players

This guide shows you how to rip DVD to MP4, AVI, MP3, WMV, WMA, FLV, MKV, MPG, RM, 3GP, and other video/audio formats supported by popular mp4 and mp3 players by using DVD Ripper .
Step 1: Install and run DVD Ripper
Step 2: Import DVD.
Place the DVD into your DVD drive and click the “Load DVD” button to load DVD.
Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.
Step 3: Video settings.
Select the output video format you want from the “Profile” drop-down list.
Tips:
1: You can also select Audio Track and Subtitle from their respectively drop-down list.
2: If you like the current image of the video you can use the “Snapshot” opinion. Just click the “Snapshot” button the image will be saved and you can click the “File” next to “Snapshot” button to open your picture. You can select the destination of the picture by clicking the “Preference” button. As default the captured image will be saved at:
C:\Documents and Settings\Administrator\My Documents\Aiseesoft Studio\Snapshot
3: If you want to merge the selected contents into one file you can check the “merge into one file” option. As default the merged file is named after the first selected file (either a title or a chapter)
4: You can click the “Settings” button to set your video parameters.
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.
when you choose the specific settings, the lower window will show the "help" to explain the meanings of each setting.
Step 4: Start conversion
Click the “Start” button to start your conversion and in a short while it will be finished.
Step 5: Click “Open” button to open your output destination file.
More tips:
1: Trim Movie
If you just want to convert a clip from your DVD movie, you can click the “Trim” button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.
After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.
2. Movie Effect
If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.
3. Video Crop
With Aiseesoft DVD Ripper you can remove the black edges around your movie video by checking the “Crop” option, so you can watch your movie on your portable players in full screen.
There are three methods available to crop your video:
Method 1: Crop by selecting a crop mode
Select a crop mode in the crop mode drop-down list and click OK to save the crop. There are three pre-set crop modes
for your choice: No Crop, Cut off top and bottom black edges, Cut off top black edge.
Method 2: Crop by adjusting the crop frame
The crop frame is the dashed line around the movie video. There are four adjustment lines on the crop frame. Each line allows you to crop the movie video from a different position.
To crop your movie video, you can just move your mouse cursor to an adjustment box and drag the crop frame.
Method 3: Crop by setting the crop values
There are four crop values on the lower left part of the crop window: Up, Down, Left and right. You can set each value to crop your movie video, and the crop frame will move accordingly.
Before you start to crop your movie video, you can select an output aspect ratio from the Zoom list. There are four choices available: Full screen, Keep original, 16:9 and 4:3. After you select an output aspect ratio and finish the crop, the result can be previewed in the Preview window of the program main interface.
dvd ripper for mac

Thanks! But when I visit the site recently, I found the program was upgraded. Now it has 2 optimized output formats specially made for iPod 30G and 60G players! Thus it is easier and more convenient to use without complex settings as other software. Try it at http://www.imtoo.com/downloads/dvd-to-ipod.converter.exe
Another good news: there was a new discount suite ImTOO DVD to iPod Suitethat contains both the DVD to iPod Converter and iPod Movie Converter. It saves newly $20! Hope this can do some help

How to rip DVD, convert video, transfer iPod music and make iPhone ringtone

Part 1. How to rip DVD to iPod/iPhone/Sansa/PSP/Zune and other MP4 and MP3 Players
Part 2. How to convert all video to MP4, AVI, FLV, 3GP, WMV, MOV, MPG, RM, RMVB, MKV, VOB…
Part 3. How to transfer music from iPod to computer, computer to iPod, iPod to iPod.
Part 4. How to make your own iPhone ringtone for free
Believe or not, to do the things above what you need is download Aiseesoft DVD Software Toolkit(http://www.aiseesoft.com/dvd-software-toolkit.html) and few clicks.
http://www.aiseesoft.com/images/guide/dvd-software-toolkit/dvd-software-toolkit.jpg
Part 1. How to rip DVD to iPod/iPhone/Sansa/PSP/Zune and other MP4 and MP3 Players.
Step 1. Click “DVD Ripper” on the main interface to run Aiseesoft DVD Ripper(http://www.aiseesoft.com/dvd-ripper.html).
http://www.aiseesoft.com/images/guide/converter-suite-new/dvd.jpg
Step 2. Open your DVD Drive and put your DVD in it, then click “Load DVD” and choose “Load DVD” to load your DVD into this best DVD ripper.
Step 3. Choose your output format from the “profile” drop-down list. This best DVD ripper provides you so many formats that out of your expectation, such as “iPod video MPEG 4 (*.mp4)”, “iPhone 3G MOV 640*480 (*.mov)” and so on.
After you choose your output format, you can adjust your output video’s settings, such as “Resolution”, “Frame Rate”, “Bitrate”, “Sample Rate” and so on.
Click “Start” now to begin your conversion and you will get your video soon.
To make your output movie more enjoyable you can do some editings to it through this best DVD ripper. You can choose a part of your movie to convert (trim), remove the black edges of your DVD movie (crop) and also adjust the effect (effect) and select subtitle and audio track.
Part 2. How to convert all video to MP4, AVI, FLV, 3GP, WMV, MOV, MPG, RM, RMVB, MKV, VOB…
Step 1. Click “Total Video Converter” on the main interface to run Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
http://www.aiseesoft.com/images/guide/converter-suite-new/video.jpg
Step 2. Click “Add File” to load the video you want to convert.
Step 3. Choose output format by clicking “profile” and customize your own output video by
clicking “settings” to adjust the Resolution, Frame Rate, Bitrate and so on.
Before you click “Start” to begin your conversion, you can do some editing works, such as pick up a part of your video to convert(trim), choose your own play region(crop) and put two or more files into one.(merge into one file).
OK, now you can begin your conversion
Part 3. How to transfer your songs and videos bewteen iPod and computer/iPod
First, Click “iPod Transfer” to run Aiseesoft iPod Transfer
http://www.aiseesoft.com/images/guide/dvd-software-toolkit/ipod-transfer.jpg
Click “Computer to iPod” button, it will allow you to transfer songs and videos from your computer to iPod easily.
Click “iPod to Computer” button, it will allow you to backup your songs and videos from iPod to your computer.
Click “iPod to iPod” button, it will allow you to transfer songs and videos from one iPod to another iPod dirrectly.
Part 4. How to make your own iPhone ringtone for free
Download Aiseesoft iPhone Ringtone Maker(http://www.aiseesoft.com/iphone-ringtone-maker.html)
http://www.aiseesoft.com/images/guide/iphone-suite/iphone-ringtone-maker.jpg
Step 1: Click “Browse” on the right side of "Input File" to import the file that you want to make ringtone from it.
Step 2: Play it and listen the music to find the segment that you want to use it as ringtone. Then drag and click the start & end slider to set your wanted segment, or type the start & end time in the corresponding text box directly to get the exact segment. You also can pre-listen the converted audio before generate.
Step 3: Click “Browse” on the right side of "Local Output Folder" to choose the output destination.
Step 4: Check "Export to iPhone" option, the converted ringtone will be load to your iPhone directly.
Step 5: After all the settings are finished, click “Generate” to begin making your own iPhone ringtone.
If you are a Mac user, I recommend you Aiseesoft DVD Software Toolkit for Mac(http://www.aiseesoft.com/dvd-software-toolkit-for-mac.html)
it has the same functions as the windows one. You can use it easy rip your DVD, convert your videos, transfer your iPod songs and videos bewteen iPod and your Mac and also make your own ringtone.
http://www.aiseesoft.com/images/guide/dvd-software-toolkit/dvd-software-toolkit-mac.jpg

That's Piracy... lol
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

How to Rip DVD and Convert Video for Your iPad On ...

Aiseesoft iPad Converter Suite is newly released software for iPad fans. It can rip any DVD files (DVD-Video, DVD folder and DVD IFO file) to iPad, convert all popular videos/audios to iPad formats and transfer files from PC to iPad, from iPad to PC and from iPad to iPad. It works similar to iTunes. So why do you always buy movies and songs from iTunes with extra money? It can help you make use of your resources.
The product is very easy in use. You just need download, install and run the trial version.
The product is multifunctional. It can trim, crop, edit video effect, merge, add text and image watermark, select audio track and subtitle, adjust video settings and snapshot.
If you are Mac user, you can choose Aiseesoft iPad Converter Suite for Mac.

To create an iTunes playlist, at the iTunes menu bar go to File and select New Playlist. Or at the bottom of the iTunes source list is a + button. Selecting the + button will add a new Playlist.
Enter a name for the Playlist.
Select Music under Library in the iTunes source list to view all music available in your iTunes library. Select and drag the music that you want in the Playlist to the Playlist and then release. This does not copy the music. This creates a pointer to the music in your iTunes library only. To delete a song from the Playlist, select the song followed by delete. Deleting a song from a Playlist does not delete the song from your iTunes library. You can have the same song in multiple playlists.
With the iPhone connected to iTunes, under the Music tab for your iPhone sync preferences select Sync Music and below select selected playlists. All iTunes playlists are available in the window below. Select the Playlist or Playlists that you want transferred to your iPhone followed by a sync.
To add additional music to your iPhone, add the music to the Playlist or Playlist in iTunes that you have selected to be transferred to your iPhone followed by a sync. To remove a song from your iPhone, delete the song from the Playlist that you have selected to be transferred to your iPhone followed by a sync.

Front Row and Ripped DVDs

Hi
Does anyone know how I get ripped DVDs (using Mac the Ripper) to play via Front Row? When I go through the Video menu I can select the Video_TS menu but it says that there are no movies available in that directory.
Thanks

... HandBrake to rip DVD's onto my MacBook
It does but it messes up the video. That is, no matter what quality setting you set (I tried it all), you end up with something that looks more like some old, worn out VHS tape than the source DVD. It also looks like iTunes can't handle more than 2 audio channels for playback. It makes me wonder about the new Apple TV. Would it also be limited to lousy video and 2-channel audio?
G5-Quad Mac OS X (10.4.5)

Hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense.

hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense. I also found online that you need Apple Mpeg-2 playback component in order to use mpeg streamclip. Even though I have OS X Lion, should I download the add-on?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

'Ripping' DVD movies for Windows

Is there anyone who could point me in the direction for an application that would allow me to rip dvd movies, but for Windows. All the other posts and applications I have found on the internet are for Mac, which is of no use to me.
Any help is much appreciated!

Welcome to Discussions. Try this thread David Fernandez, "How To Copy DVDs to iPod using free software for Windows" #94, 02:32pm Nov 2, 2005 CDT. An alternative product is PQ DVD, which does it all in one app, but it does cost £35 if you want more than 8-12 mins. With the above, also be careful with sound tracks, as it is easy to get the directors cut instead of the actors, so always do a small test before doing a whole film.

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

My start up disk is full and I need to move my files to an external hard drive, how do i do so?

My start up disk is full and i need to move my files to an external hard drive, how do i do so?

Ensure that the external is correctly formatted
Drag and dropped the files
Test to be sure that the moved files work
Once the moved files work delete the originals
Allan

...ripping DVD material and saving as full movie...

Similar Messages

Maybe you are looking for