Ripple Delete And Move Markers Too?

I'm looking for a way to ripple delete this gap in such a way as to move the chapter markers with it. Is it possible to set the edit line to the beginning of the clips and set the timeline to zero? Seems there used to be a way to do this, but I don't see it.

lovely!
i just ran into the same need in CS6. is there a possibilty aswell?

Similar Messages

Adobe Premiere Pro CS5.5 crasing from ripple delete and copy

I've been using Adobe Premiere Pro CS5.5 for several months now and it's been working with next to no problems and I've been very happy with it until today.
As I've neared the end of a recent project, after doing nothing different than usual I went to use ripple delete and every time I try it I now get this error message:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\ClipTrackRippleAction.cpp-56]
Then:
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
Then if I try to copy clips or move multiple clips this error message shows up:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\SequenceAddTransitionAction.cpp-57]
Then:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\TrackItemTrack.cpp-639]
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
I am, however, still able to move single clips, adjust the length of individual clips and able to watch my project.
I've tried two different computers and restarted one and nothing has changed.
Is there an explanation as to why this is happening? Is there anything I can do to get around this or make it stop?

Lord Nelson here.
I've reverted back to 5.5.0 as I was experiencing lock-up problems with the BM Intensity Pro.
Unfortunately I haven't found a way of simply uninstalling the update and reverting back to an earlier version. Win 7 Sytem Restore wouldn't, so I had to uninstall Premiere Pro, apply the Adobe Clean Install utility (or whatever!) and then reinstall PP CS5.5. Trouble was that it reinstalled the whole suite, not just PP - so I lost all custom workspaces across the suite.
Grrrrr!

When do the Ripple Delete and/or Join commands become active?

I have been using Soundtrack Pro for a while, but I have not been able to use the Ripple Delete and Joind commands. Under which conditions do these commands become available? Does the Ripple Delete command work like in FCP? I use ProTools, and I would love Soundtrack to include something like the Shuffle mode, in which removing a section on the Timeline would make the rest of the audio samples on that track move up.
Is this possible? I know this can be done on the audio editor, but sometimes editing to picture requires doing this on the Timeline.
Thanks in advance for the help!
Powerbook G4/G5 1.8 GHz Mac OS X (10.4.6)

Great tip Simon - but do you not find this a bit irritating - that you have to go through this extra process just to perform a ripple delete?
The other point here, is that if you make two cuts in a clip, and then drag over the timeslice section, even with snapping turned on, it seems easy to me to not pin-point the edit in quite the same way that you do with a simple cut. By dragging over, if you miss the edit point by a fraction, you can end up ripple deleting over the cut you intended to make.
Sadie does all this with so much more ease in my view... a lot quicker when doing very fast editing. I'm surprised that with a 'pro app' tag, apple haven't gone the extra few yards with STP. Doesn't quite cut it (in my view)
Ant
G5 2GHz dual, PowerBook G4 Mac OS X (10.2.x)

In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

Thank you for your attempt to help me. I appreciate that.
I think I figured out how to fix it-
I found that if I only delete a small amount at the beginning and at the end of the section that I want to remove - and then highlight that section - Then (and only then) does the "Delete and Move" function work to remove the unwanted section and automatically close the gap between the surrounding sections. I was trying to select a whole section and could only delete it - and then manually move it.
Problem solved.

"Delete and Move" option not given

I want to chop a section of audio. If I highlight a section and type command-x, it deletes the audio and leaves a blank section. According to the help menu, "delete and move" is supposed to chop the section and merge everything -- I want to do this to eliminate a section entirely. But when I highlight a section, the "delete and move" option is gray and can't be selected.
There must be a simple answer to this but I don't know what it is.
Thanks.

Well, it would be easier if you could just do it in the Track Editor, but it doesn't work that way. (You can only delete a portion of the Region there, not have it move automatically).
Select the Region. That's one mouse click, whether it's an hour of audio or ten seconds. Then simply place the playhead where you want, do a Split (Cmd+T), move the playhead, do a Split, then click in a blank area (to deselect), click on the region to be deleted, and Ctrl+Del.

I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???

I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???
I can see the block (flashes) and the buttons are no longer usable.
I have Empted Cache but doesn't seem to help.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

Help understanding "delete and move"

I've recorded a 20 minute Podcast, basically one long stream of me talking. I'm trying to figure out a way to cut out all the "ums" and "uhs", but moving the rest of the audio stream over so there isn't a big pause where I've cut out the audio.
The closest I can find to perhaps doing that is "delete and move" but it doesn't seem to work when I highlight the "um" waveform in the editing window. Delete and move isn't an available option there. If I just "delete" the section, it doesn't close the gap and I have to move the whole subsequent wave file manually to the right to close the gap.
Anyone have an idea how to make this a little easier?
Thanks!

I need to to this with my guitar recording input at times. You need to utilize the split and join tools. If you were to place the time-line at the beginning of the "um" or "uh" and command T to split the section which you highlighted green, then move the time-line to the end of the "um" or "uh" and command T as well making sure it is still bright green. Then click off the section to unselect green it and then click on the sectioned area and highlighting it, delete this section making sure this is the only area bright green to delete. Then bring the two sections together and join them. Joining requires that the two sections be touching and with bothe sections highlighted or selected, command J and now the deleted section is gone and the time differential with it. From here, play around with pause length and insert pause periods as will. This seems rather verbose but that is my way of explaining a purely visual thing.

Ctrl + Backspace to "Delete and Move" on Macbook with no backspace key

Yes, I searched for this. Yes, I know Function + Backspace = Delete but that doesn't work in Garage Band when trying to "Delete and Move" to delete part of a clip and fill in the empty space. How do I do that?
While I'm asking ... how do I fill in empty space without dragging a clip if I'm not deleting anything (confession: I didn't search for that).

Jay Sprout wrote:
Function + Backspace = Delete
that's incorrect:
http://www.bulletsandbones.com/GB/GBFAQ.html#removesectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
While I'm asking ... how do I fill in empty space without dragging a clip if I'm not deleting anything
you don't, you have to drag

How can i ripple delete the movie with chapters included?

Hi,
I like to remove certain movieparts by the razor tool or ripple delete. However, the 50 chapters I created don't move together with the moviepart. Any way I can leave out movieparts and all the chapters follow the ripple delete command?
Any feedback on this would be great :)

Chapters are associated with the timeline, not clips.
You'll have to do this by hand.

Ripple Delete and Chapter Marker question

Hi All,
If I ripple delete a section of a clip ( and I guess more generically, if one cuts/inserts) are the chapter markers on the timeline kept in sync with the remaining clips. And if not, is there a workaround.
Thanks

I think Patrick is referring to this
What are question answers?
When a community member posts a question as a topic starter, other members can post an answer in reply. Please note that not all replies actually answer the question.
An answer can be just some hints or helpful information to help the poster solve an issue. The originator of the topic can mark such a reply as a "Helpful" post. A small yellow star will appear next to that reply and the person who posted the reply will be awarded 5 points. Here's what a reply marked as being "Helpful" looks like:
If a community member posts a specific answer that provides a solution to the original poster's issue, the originator can mark this reply as a "Solved" post. A large green star will appear next to that reply and the person who posted the reply will be awarded 10 points.
Only the original topic poster has the option to mark replies as either Helpful or Solved or to not mark a reply at all. The originator can also end the discussion by marking the topic as "answered," which displays a green star at the top of the topic page to let everyone know that the topic contains valid helpful information.
Note: Only two replies may be classified as Helpful and only one reply may be classified as Solved in any question topic. Non-question topics do not offer these classifications
This isn't so much about points, but to make the forums useful for searches. If you search for the answer to a question that's been asked a hundred times before, the green stars tell you which answers solve the problem or at least answer the question asked.

How can I delete and move up instead of down?

When I delete an entry the next entry below the one I deleted appears. I would rather have the next entry above the one I deleted appear. This is because I start at the bottom of my undeleted entries and move up my list. How can I do this? Many Thanks, TM

I don't think you can.

Lost ability to add, delete and move email addy's in Address Panel

Not long ago I downloaded Snow Leopard 10.6.3 from disc and then upgraded to 10.6.8. Perhaps a coincidence, but now I see I'm no longer able to use Address Panel as I previously had. Specifically: I recall there had been + and - buttons to add and delete email addresses, but now I don't see these ~ perhaps I'm looking for the wrong thing? Also, I can't drag and drop an addy from one group to another as I previously had. I'm using Mail 4.6.
Any suggestions would be greatly appreciated. Other than the Snow Leopard download, I've no idea what may have caused this problem. Or perhaps I simply don't know where to look ~
Thank you!

My bad ( : - 0 ! I figured this out:
It's Address Book ~ not Address Panel ~ that does the trick.
Thanks!

My partner has been given an iphone 4 from her father, I have manged to delete and move to her email but need to know how to change the phonebook i.e delete it and change the apple i.d...any ideas?

Hi All
My Partner has been given an ipone 4 from her father.
I have managed to delete his email and set hers up, what I need to do is delete his contacts entirley..would this be able to be done if she connected her ipone to the computer and made herself an apple I.D or is it a matter of reset ?
Also some pictures on the phone she would like to keep..
Many thanks

If her contacts are available in an Address Book app on her computer that is supported for syncing with the iPhone, she can select the supported address book app on her computer under the Info tab for her iPhone sync preferences for syncing contacts. She should be provided a merge prompt or replace the contacts on her iPhone with what is available in the address book app on her computer. Select the 2nd option.

If I update to itunes 9, will my gift card $ delete and my library too?

I have seen mutiple topics about itune 9 being a total pain... but if I update will I defintely lose my store balance from gift cards, and my library of purchased & imported songs??
I have windows, and still have itunes 8(i think).
Thanks for all help!

See -> How to back up your media in iTunes - Backing up your iTunes library to a CD or DVD
or -> Back up your iTunes library by copying to an external hard drive
Personally, I run a backup program to backup my internal HD to an external HD automatically, twice a week.

Can encore chapter markers auto shift after ripple delete?

I need to break up a 4 hours sequence into two shorter ones to make 2 dvds. However I've already marked all the chapters. I duplicate this long sequence and ripple delete the first half to make the 2nd dvd sequence. However the encore chapter markers didn't move with the ripple delete. Is there a way to attach these markers to certain location of the video clips so I don't have to move them when I change the length of the sequence?
using premiere and encore cs4

One work-around I can think of is to put a bunch of minute-long dummy video clips on a track and position them on the desired chapter point. These clips would shift along with ripple delete, and I can move the chapter points to line up with these dummy clips quickly.
For the current project I don't plan to ripple delete or change the length anymore, so I manually re-position the chapter points this time, for the last time I hope.
I did switch to dynamic link -- seems to be the only way to get the chapter points into encore, and I'll admit it's an improvement over cs3 where I export an avi file and import that into encore.

Ripple Delete And Move Markers Too?

Similar Messages

Maybe you are looking for