Risk Analysis in CUP not working

Hello Experts, we are using GRC 5.3. In CUP, I am trying to approve Role Provisioning. One of the requirements is to run Risk Analsys (as it says 'Risk Analysis is Mandatory'). When I hit the 'Risk Analysis' button, the circle keep circling but, nothing seems to happen forever (no error message either). Can you guide me in the right direction? What could be the possible situation? And, where am I better off to start troubleshooting.
Thank you.

Well, the problem seems to be that I am connecting from VPN. From my analysis, after I reboot the laptop, I am able to analyze risk for the first 3 or 4 requests and after that I can't do risk analysis for any more requests until I reboot my laptop. If I login to a remote server (say Virsa server), I seem to have no problem at all. i am able to continuoiusly run risk analysis for multiple requests. The problem seems to be VPN or my laptop.

Similar Messages

CUP Risk Analysis results are not shown, continues processing request

We have several users that complain the risk analysis in CUP never finishes. Requests do not contain risks or huge amount of risks which could explain a long runtime.
With one user we checked, the user is never getting the risk analysis result on his screen. Sitting together with the user shows that the progress bar at bottom of IE is completing analysis, however the screen is not updated to show the risk analysis result and continues to show the processing circle.
On other pc's CUP risk analysis result is shown as expected, so it must be some issue in local PC Internet Explorer settings.
Environment used is Windows XP with IE 8. GRC version is 5.3.
Have any of you experienced the same? And is there a solution available that will resolve this issue, by e.g. correcting settings in IE 8?

Hello!
If you want to successfully use GRC 5.3 with IE8, you have two options:
1) Change a parameter in the server
2) use the compatibility mode.
3) Update NW
refer to [Note 1347768 - Web Dynpro and Microsoft Internet Explorer Version 8.0|https://service.sap.com/sap/support/notes/1347768]
I dismiss option 2, because it requires to change in every end user computer, so I've been working with option 1 without problems. Bear in mind that NW 7.01 is supported: [Note 1433940 - Access Control compatibility on Netweaver Java server 7.01|https://service.sap.com/sap/support/notes/1433940]
Cheers!
Diego.

Error Creating Request - Risk Analysis in CUP

Initially, we had the issue of not being able to create requests in CUP. I read around and found out that I needed to go to Configuration > Risk analysis and change the "Perform Risk Analysis on Request" to No. I tested and I was able to create a request. This tells me that SOMETHING is wrong with the Risk Analysis in CUP. So since its a Risk Analysis error, I when into a requested and selected Run Risk Analysis and go the following error.
"Risk analysis failed: Exception in getting the results from the web service : Service call exception; nested exception is: java.lang.Exception: Incorrect content-type found 'text/html' "
But before anything. I just want to verify if its an authorization error with our webserivces id. Any input?
Thank you,

1. In the CUP Configuration-> Risk Analysis.
Under the section "Select Risk Analysis and Remediation Version"( or "Select Compliance Calibrator Version" for version below CUP 5.3) make sure that the following web service is given in the URI, if the "Version" selected is above 4.0.
"http://<servername>:<portnumber>/VirsaCCRiskAnalysisService/Config1?wsdl&style=document"
In the server name and port number, enter the corresponding entries of the Compliance Calibrator (CC) or (Risk Analysis and Remediation (RAR)) server entries on which it is installed.
The User given under this section should have the administrator access for the CUP and RAR.
CUP is 5.3 and we have the correct URL. The user is given the following roles:
AEADMIN
CC_Administrator
VIRSA_CC_ADMINISTRATOR
Please review the attachment for the list of actions in these roles. Please let me know if there is an action that the webservice id should have. In the link below, be careful of all the download buttons. Choose the "Save file to your PC: click here" link and open the file. (not save)
http://www.2shared.com/document/8dOC7v6E/actions.html
2. Make sure that the user provided in the CUP connector has the access for connecting to RAR and it should also have the administrator rights of the RAR.
Should the access be provided from the roles/actions from above?
3. Make sure that the password of both the users given in the above points is not expired i.e. they have been reset in UME.
You can check the same by once logging into the UME through that users. In case it asks for the password change, then the password is expired and you need to change the password and give the new password in the CUP.
Should the password ever expire for this ID? I will double check on the password.
4. The logon language of both the above users should be maintained in UME.
I am not sure how to check this, please advise.
5. Also check that the connector in the RAR is working and is able to connect to the backend SAP system.
I tested the connection in CUP and connection was successful. How can I test the connection for RAR?
Thank you in advance,
Edited by: Eric Lau on May 17, 2010 6:41 PM

Perform Risk Analysis on Request - Not available via WebService call?

Hi,
I'm using AC 5.3 and using the SAPGRC_AC_IDM_SUBMITREQUEST to submit a request to CUP.
At CUP I have configured to 'Perform Risk Analysis on Request'.
This does work, when I create a request using the CUP Web Interface.
The same request made through the CUP Web Service request doesn't fire up the RIsk Analysis.
Is it a bug, a feature, a limitation or did I miss something?
Regards
Holger

Hi Harleen,
yes, the SAPGRC_AC_IDM_RISKANALYSIS Web Service call work as well and comes back with risk information.
But this is a different story.
When starting a manual request and a risk occurs, the approver does see the risk in the approval form.
When starting the rquest through the WebService and a risk occurs, the approver does not see a risk and must start a manual risk analysis to be informed about existing risks.
This feature is very bad, because it limits the functionality drastically.
Is there a way to make this an enhancement request?
KInd Regards
Holger

Full Synch risk analysis job is not running good

Hi
Recently we have started user_full_synch_risk_analsysis job is running but with many error..
I have checked the SLD it is running, JCO also tested good..checked in debugger...tried to look the data..working good..
but the log saying "can not extract the data from DEV system"
it is skipping each userid risk analysis saying the above error and it continuing with other userIDs.. Please help
INFO: Job ID:18 : Exec Risk Analysis
Sep 27, 2010 7:51:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
INFO: Job ID:18 : Analysis starts: XRPM_PM2
Sep 27, 2010 7:53:04 AM com.virsa.cc.comp.BgJobInvokerView onActionsearchObj
INFO: Number of users matched:132
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.meng.MatchingEngine matchActRisks
WARNING: Error :
com.virsa.cc.dataextractor.dao.DataExtractorException: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
     at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:682)
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:112)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1331)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:18 : Failed to run Risk Analysis
java.lang.Exception: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:118)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1331)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=18 and object(s):XRPM_PM2: Skipping error to continue with next object: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :XRPM_PM2:Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=18, status=2, message=Error while executing the Job for Object(s) :XRPM_PM2:Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis

Dear Harikrishna,
Please mention what is your Support pack. This is an identified bug for SP12 especially synchronizing the users from the backend and doing the risk analysis at the user level. We had the same problem. But for some reason we are now able to do the synchronization from the backend but the management reports are getting updated.

GRC Risk analysis reports are not checking all possible risk conflicts set up in the rule set that lead to risks.

Dear All,
After running the risk analysis it shows only the first conflict for a risk in the rule set (Rule ID 0001). We have already Generated SOD ruleset. Also during migration from 5.3 to AC10.1 all the rulesets were imported properly.
What could be reason??
Thanks for your help.
Regards,
Abhisshek

Abhisshek,
there is already a thread with the same question: Dear all I only get result for one rule id and not with others what should be an issue?
Regards,
Alessandro

Price analysis in webshop not working

Hi,
Our requirement is to display price analysis in an internal webshop as the business would like to understand how pricing is working.
I have set the enable.pricing parameter in XCM to 'true'. We made the following changes in the web.xml --
<context-param>
<param-name> priceAnalysis.isa.sapmarkets.com</param.name>
<param-value>true</param-value>
I also added the prc_trace parameter to the user parameters.
One old SAP note had mentioned changes to 2 parameters (priceAnalysis and enable.Price). When we made this change to the web.xml, we were able to see the price analysis in the product catalog (in the form of a hyperlink on the price in the page that gets displayed when one drills down in to the product hyperlink).
However the price analysis in the shopping basket or the order (in edit mode) is not working.
Does anyone have any ideas on what we might have missed?
Any helpful replies would be appreciated.
thanks

Hi Easwar,
we initially made the change only to the UI component through XCM. After a server bounce, no changes were seen on the webshop.
Then we added the code as per the old SAP note (which mentioned changes to 2 parameters). Price analysis started working for the product catalog after re-starting the server in visual admin. It was still not working at the shopping basket/order level.
This was the code --
<context-param>
<param-name>enable.priceAnalysis.isa.sapmarkets.com</param-name>
<param-value>true</param-value>
<description>Turn on IPC price analysis</description>
</context-param>
<context-param>
<param-name>priceAnalysis.isa.sapmarkets.com</param-name>
<param-value>true</param-value>
<description>Turn on IPC price analysis</description>
</context-param>
We then tried commenting the first part but this made no changes. Commenting the entire code again has resulted in no hyperlink on the price of products in the product catalog.
regards,
Jaya

Analysis Authorization Object not working

Hi Gurus,
I m working on BI 7.0, I have created an analysis authorization object zz_div for 0DIVISION characteristic.
For a given report i want a given user to view only data for '32' and '33' 0DIVISION.
I have followed the below steps but still the report shows all data instead of restricted one.
1)RSECADMIN -> Maintenance ->zz_div ->Create
2) Add 0DIVISION in Auth structure , and in details
I     EQ     32
I     EQ     33
3) Add 0TCAIPROV with I     EQ     0SD_C03
4) Add 0TCAACTVT, 0TCAKYFNM, 0TCAVALID, this having details as
I     CP     *
5) Then in User tab -> Assignment -> User -> Change-> Inserted ZZ_DIV-> Save
6) In Query created a Authorization variable(with no input prompt) and restricted 0DIVISION.
Following are the authorization object in that user's Role (Reporting Only)
S_RFC
S_TCODE
S_GUI
S_BDS_D
S_BDS_DS
S_OC_SEND
S_RS_AUTH - only having zz_div
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
S_RS_RSTT
S_RS_TOOLS
S_RS_PARAM
I have surfed lots of thread for this issue but not getting a solution
Tell me what i m missing in above or any additional setting need before creating analysis authorization
Edited by: Sonal Patel on Apr 18, 2009 8:10 AM

Hi
Thanks a Ton for ur reply
I have checked in SPRO : Analysis Authorization
where the authorization mode is " OLD obsolete Concept With RSR Authorization Objects "
We have to do the same in Production system .Can u please how its going to effect to others authorizations if change it to New Concept
Thanks
Sonal....

Hierarchy Analysis Authorization does not work after transport

Hi Gurus,
I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
Regards,
Salman

Salman,
What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
Regards,
Shivraj Singh

Terminate Action in CUP not working

Hi All,
We have configured HR triggers in GRC CUP. The new hire and transfer rule work as expected. However, the terminate rule does not deactivate the records in the backend system. The process log does not have a record for the terminate action.
Any ideas on how to troubleshoot this problem?
Thanks,
Vinaya

Hi Alpesh,
I am sorry for not being clear enough. By deactivate i meants Lock and change account.
We have executed the terminate action in backend but nothing seems to happen in GRC....as there is no record of the action in the process logs.
Any ideas on what could have gone wrong? The HR team has confirmed that the infotypes used in Rule definition are appropriate.
Thanks,
Vinaya

CUPS not working, due to wrong udev rules.

Hey everyone,
i got a problem getting my Brother DCP-145C (Printer & Scanner) to work.
I already did a little research and found out that the udev rules aren't working out, i tried to fix it according to this thread
So here are a few outputs, that hopefully help:
Here is the problem, the printer should be in the group lp:
[root@myhost rules.d]# ls -l /dev/bus/usb/
total 0
drwxr-xr-x 2 root root 60 2009-12-08 14:17 001
drwxr-xr-x 2 root root 60 2009-12-08 14:17 002
drwxr-xr-x 2 root root 60 2009-12-08 14:17 003
drwxr-xr-x 2 root root 60 2009-12-08 14:17 004
drwxr-xr-x 2 root root 100 2009-12-08 14:17 005
drwxr-xr-x 2 root root 60 2009-12-08 14:17 006
drwxr-xr-x 2 root root 60 2009-12-08 14:17 007
drwxr-xr-x 2 root root 80 2009-12-08 14:34 008
usblp is blacklisted:
[root@myhost rules.d]# cat /etc/rc.conf |grep usblp
MODULES=(!usblp usbhid)
Here the printer and the udev rules:
[root@myhost rules.d]# lsusb|grep Brother
Bus 008 Device 003: ID 04f9:0206 Brother Industries, Ltd
[root@myhost rules.d]# cat *|grep 0206
ATTR{idVendor}=="04f9", ATTR{idProduct}=="0206", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"
ATTRS{idVendor}=="04b0", ATTRS{idProduct}=="0206", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="proprietary", MODE="0660", GROUP="camera"
The first rule is from my self created 10-cups-usb.rules file:
[root@myhost rules.d]# cat 10-cups-usb.rules
#Brother DCP-145C
ATTR{idVendor}=="04f9", ATTR{idProduct}=="0206", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"
I don't know if its interesting but here the dmesg output if i replug my printer:
[root@myhost rules.d]# dmesg|tail -n 10
usb 8-2: USB disconnect, address 2
usb 8-2: new full speed USB device using uhci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 9:0:0:0: Direct-Access Brother DCP-145C 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 9:0:0:0: [sdc] Attached SCSI removable disk

Thanks for confirming this issue.
I did find a message on VersionTracker.com which included a link to the uninstaller:
<http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14157>
I uninstalled using the utility and deleted any flash related files/folders manually and reinstalled the beta. This did not help.
I ran the uninstaller again and installed the previous verion (9,0,47,0) and all is well again.
Thanks!
Jim

SQL Injection analysis report does not work.

I have tried to run the SQL Injection report (Home|Utilities|Object Reports Security|QL Injection but it comes up with the following message.
"SQL Injection analysis is not supported with your current database version. It is only available for Oracle release 10.2 or higher."
I have tried this as both an ordinary user and as system, on both Windows XP and Linux

This is a bug in the XE Beta. The SQL Injection Analysis will not be accessible for XE production.
Joel

Excel export in analysis for olap not working

Hello!
I want to export from analysis for olap 1.1 to an excel file.
First I clicked on the export button, then I chose the wanted compontents and clicked ok.
But there happens nothting, but a new browser window opens and closes itself immediately.
Neither a dialog opens and asks where I want to save this excel, nore I found a related excel-file in my system.
Any ideas on this problem?
Regards,
Kathi

Hi Kathi,
finally we solved the porblem. i guess you are working with IE 8.0?
*if so, add the BO-Server (http://server.com) to your lokal intranet sites (inside the IE 8.0).
*also check document mode in IE 8.0 is set to Quirks Mode (under ''Tool/Developer Tool'') when opening the analyis olap report
then it should work.
regards
Tom

Org Rule anlaysis when performing mitigation from risk analysis report do not mitigate the user from management summary report message!

Hi,
When in the User Level>Mitigation screen this comment appears (*). When taking the path to ‘summary’(a) or ‘detail’ (b) doesn't change when we select the button MITIGATE RISK (**). What was the intent of the below message?
What is the intent of the message ?

Hi Pranjal,
please see note: http://service.sap.com/sap/support/notes/1972382
Regards,
Alessandro

CUPS not working

...one day I wake up and decide I need to use my printer.
Nope. Not gonna happen.
Copied some error lines from one of the logs:
E [23/Jun/2006:20:07:51 -0700] Hostname lookup for "localhost" failed!
E [23/Jun/2006:20:07:51 -0700] Bad Listen address localhost:631 at line 17.
E [23/Jun/2006:20:07:52 -0700] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [26/Jun/2006:08:38:44 -0700] [Job 89] Unable to open USB device "usb:/dev/usb/lp0": Success
E [26/Jun/2006:08:38:44 -0700] PID 3769 (/usr/lib/cups/backend/usb) stopped with status 1!
I can't use the web interface to set up CUPS. I get some kind of fake/spam address instead saying download our pirating software.

brain0 wrote:
Bysshe wrote:
brain0 wrote:This is most likely not a bug, but another stupid permission problem. Check the permission of the printer device, it must be daemon:lp 0666
Yeah, something wrong:
[soylent@green ~]$ ls -l /dev/lp0
crw-rw---- 1 root lp 6, 0 2006-06-26 09:00 /dev/lp0
No, these are ok, cups should be able to use it.
I've got to learn how to read those permissions a little better. It just looked weird to me. But hey, thanks for the help. Is there anything else I can check?
Thanks for patience with the newbie.
Here is my hosts file:
127.0.0.1 localhost.localdomain localhost green
Relevant rc.conf:
HOSTNAME="green"
Cups starts and stops fine. I can install the driver via web, and I can install it via Samsung's script. In Samsung's toolkit, I can see the printer, but it cannot process jobs. If I print a testpage from the setup interface I get a message: "printer fault!" But the printer itself does not turn the "error" LED red. It just warms up to print, and stops, with final status "idle, accepting jobs". I've only got one lp device under /dev "lp0"

Risk Analysis in CUP not working

Similar Messages

Maybe you are looking for