Risk category field is missing in dso for 0fiar_o09 credit management.

Hi BI Experts,
I am using the standard extractor for the credit management dso 0fiar_o09.  The field for risk category originates from our R3 system in table knkk-ctplc.  It displays correctly in the psa.  The transformation rsds 0fi_ar_9 maps it to 0risk_categ.  It appears as an infoObject in the infoSource.  The trcs transformation maps the rule also.
However, when I try to display the data in the dso, the risk category field does not display at all.
Please help with any possible suggestions to display the missing field.
Kind regards,
Cheryl Adamonis

I resolved this issue by removing the check in the  'attribute only' selection on the general tab of the infoObject.

Similar Messages

  • Partner function relevant for the credit management.

    Hi,
    Which partner function is relevant for the credit management.
    Regards
    Prabudh

    Hi Prabudh,
       Check this link.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0fde72f-8216-2a10-6e87-e69ab79cb24f
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
    Much Regards,
    Amuktha.

  • Not able to see specific tags for FSCM Credit Management on BP master data screen

    Hi All,
    I have already set up Collections & Dispute Management,
    I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any specific tag on BP Master data related to Credit management, (just as I can see "Collections profile" tag, in reference to Coll. Mngmt).
    So, I am not able to see these tags yet: "Credit profile", "Credit worthiness", "Cresit limit and control".....under Credit Management BP role!
    What am I missing there? Have I got to activate BAdi UKM_R3_ACTIVATE in order to be able to "see" those BP tags???
    ....Or what else?
    I will reward with points if someone can provide me any hint about this issue.
    Thanks a lot.

    Hi Pallavi,
    Many thanks for your quick response. However, I have not succeeded in seeing that tab.
    Let me tell you, I may be confused by a document I downloaded from internet about the BP master data views (as for the FSCM Credit Management role, of course) . Please find below the commented tag. It is an imaged I copy to you from that document I told you, for you to see which tag I am talking about:
    I don´t know the content of that tab...but I would like to see it in place....you know..
    Now, I checked you last answer and I saw that everything was already set by factory, please find below:
    BUS4 view:
    BUS5 view:
    However, I´m still not able to see the tab I told you at the beginning (first image). Am I confused about something here? Many thanks for your patience (these things happens when you set FSCM Credit Management for the first time).
    Is that tag accesible?
    Many thanks!
    Wilson

  • Missing windows service for Oracle Enterprise manager

    I have installed Oracle database 10G R1 (without seed database), and applied patchset 10.1.0.4. I have used the DBCA to create a database instance, which was created successfully (see note1).
    However the windows service for the OEM DBconsole has not been created. I have tried to lookup the manuals how I can manually create this, but with no success. Please can somebody point out the correct procedure?
    Best regards,
    Jesmond
    Note1:
    If using DBCA the optional example schema are selected and saved to scripts, the calling script <ORACLE_SID>.sql must be amended to move the line below to the last entry:
    @E:\oracle\product\10.1.0\admin\ebuscon\scripts\sampleSchema.sql
    This is due to the fact that the sample schema script has an "EXIT" statement which will cause the creation script to terminate prematurely.

    I think you have a similar problem as described in
    Problem starting EM 10g
    emca did not run, on Windows it also creates the corresponding service.

  • Bapi for customer credit management

    Dear Gurus,
    Can u tell me the bapi for FD32 .ie. customer cedit management.
    If u have any customised bapi then do send me the same.
    Points will be awarded for every try.
    Regards,
    Mohan.

    Hi,
    There is a standard function module 'CREDITLIMIT_CHANGE' which can be used to insert or update credit limits and therefore credit master data.
    Two indicators, UPD_KNKA and UPD_KNKK are available to indicate whether you want to create credit master data or update or delete existing data. UPD_KNKA is for central data and the other for credit control area data.
    There may be technical differences between BAPI and a normal function module, but for all functional purposes this FM can be used just like a BAPI.
    Cheers,
    KC
    SAP SD

  • Bapi Function module for the Credit management

    HI,
          Can anyone tell me the function moduleof the Credit Master Management.
    thanks
    Kiran

    Check out the FM
    <b>CREDITLIMIT_CHANGE</b>

  • How to change the Risk category in FD32

    Hi
    we have requirement to chage the risk category for existing customer in FD32, there are few open documents for the same customer,
    Currently risk category field is grey out, so first we need help to allow the change and second, it should not affect to all the open document by changing risk category.
    Request you provide some help on the same..
    Regards
    Vanraj

    Dear Vanraj
    Go to FD32.
    Enter customer code and CCA.
    Check STATUS in Credit Control Area Data. Press enter.
    The risk category is not grayed out here.
    Change it to desired one.
    Save it.
    I am not 100% sure but expect that it will not change open document.
    Try it and update forum.
    Thanks
    Pawan Sharma

  • Customer order credit block on Risk Category

    Hi,
    We have a scenario where order of all customers belonging to a specific Risk Category should go into credit block, irrespective of the Customer account balance, credit limit set in FD32 and Credit exposure.
    The detailed case is mentioned below.
    Customer Risk category = C8
    Credit limit = 1 euro
    Customer recievable (in FD33 ) = 2776.17-  (Dta migration line items w/o Special G/L)
    Sales value (in FD33) = 2237.73
    Credit Exposure (in FD33) = 538.44-
    For above scecnario, order are not going into credit block ,as the credit exposure is ( 538.44- ). Client wants that for Customers with risk category C8, all the orders should go into credit block.
    Please guide for solution.

    Hi
    If the order has to get blocked for a specific risk category then you have to with the user exits only.So kindly use anyone of the following user exits.
    1) LVKMPFZ1: USER_CREDIT_CHECK1
    2) LVKMPFZ2: USER_CREDIT_CHECK2
    3) LVKMPFZ3: USER_CREDIT_CHECK3
    Thanks and Regards
    Srinath

  • FSCM-CR Case types for Documented Credit Decision (FDCD, FDCA) missing.

    Hi FSCM community
    I am looking at the FSCM CR module and got some issues here and there.
    Here's one of them.
    Documentation for the SAP IMG node:
    FSCM -> Credit Management -> Credit Risk Monitoring -> Documented Credit Decision -> Settings in the Case Management Component
    'Case types
    The following case types are contained in the standard system for SAP Credit Management: Credit Limit Request (F_CR), Doc. Credit Decision for Document (FDCD), Doc. Credit Decision for the Account (FDCA)'
    1. Were you able to find the FDCD or FDCA case types in your systems?
    Mine only has F_CR.
    2. What are the:
    - Processes
    - RMS ID's
    - Case record models
    assigned to FDCD or FDCA?
    3. Are they any different from the F_CR?
    4. I understand they're required so that they may be assigned as Documented Credit decisions (under Define Case Types for Documented Credit Decision). What Case Types did you assign?
    My SAP_APPL is 617, so it's rather up to date.
    thanks for all your input,
    Darek

    Hi Ankur,
    I found the BC set, reviewing the content.
    It seems like you saved my day
    I don't see any other UKM* related BC sets except for the one you mentioned.
    Do you know of any others?
    regards,
    Darek

  • Credit Managament: avoid credit block for down payment invoices

    1) Downpayment - when an order is blocked, can we create a billing
    document of the downpayment request created in slaes order. Logically
    the customer wants to pay for this downpayment immediately and process
    the order
    Notes: If credit management is activated at sales order level and In
    Milestone Billing scenario or Project Sales order scenario, at Sales
    order level we have a Downpayment (Z0000 - Downpayment) Milestone
    usage and Other Milestone invoice Usages.
    The business requirement is Customer need to pay the downpayment
    invoice before executing the Sales order.
    In SAP when the Sales order is blocked for Credit Management, system is
    not able to create the Downpayment invoice also. to creat the invoice
    we have to release the order first. However we dont want to release the
    order but want to receivce the downpayment and then may be we can
    manually release the order and process. The reason is suppose we have
    an automatic release to production or PR or creation of service order,
    we would like to process them only after the downapayment, now for
    creating the wownpayment invoice for receiving the downpayment, we have
    to release the order which shall further process the order
    automatically. Please suggest a solution for the same to avoid the
    credit block for the Downpayment invoices.

    I think this can be enabled easily.
    For the combination of Credit Control Area, Credit Group and Risk Category, you should have enabled the Dynamic/Static credit check, you can configure it such a way that it only gives you a warning message and doesnot block your sales order. This should solve ur problem

  • Additional Customer Fields in Trans. OVA8 Define Automatic Credit Control

    Hi,
    I must add a customer field in the transaction OVA8 for the credit control but I don't want to make a standard modification.
    There are some alternative possibility ?
    Best regards.

    Many Thanks for your suggestion but with smod i don't find a screen exit for my transaction.. I am mistaking something?
    Thanks

  • Service Interfaces for Credit Management using WS-RM

    Hi,
    We are implementing FSCM Credit Management on EHP 5 without using PI. For this we are WS-RM and have configured following service interfaces:
    CreditCommitmentNotification_In
    CreditCommitmentNotification_Out
    CreditWorthinessQuery_In
    CreditWorthinessQuery_Out
    However, when we create sales order, credit check is not being perfomed. Do we need any other service interface for implementing Credit Management?

    Hello,
    I am using ECC 6 ehp 5 Which Enables you to Implement FSCM services via WS-RM (Web Service Reliable Messaging) instead of having to use Previously PI.
    I require to implement the scenario is:
    Credit Management (FSCM) and Integration with FICA without requiring PI.
    I think I have covered all the technical configuration, but do not know how to test credit management and integration with FI-CA, appreciate if you can do to get a guide.
    As indicated by the WSRM configuration guide, run the report SRT_ADMIN_CHECK and the result is:
    Cross-checking system settings
    bgRFC destination is Operational
    bgRFC destination is registered supervisor
    WSRM event handler is activated
    Task is active watcher
    Data collector for monitoring is not activated
    ICF All nodes are active for SOAP Runtime
    Ending cross-check of system settings
    thank you for your help.
    Regards.

  • Problem with credit managment for FI-documents

    Hello,
    is there any possibility to modify the value "Total receivables" for the creditmanagment?
    I customize the position-type as not active for "credit active" and the values for the sales part are set correctly for the credit managment.
    But everytime I create an invoice and the FI-documents are created, the value for the "total receivable" in report
    RFDKLI40 is wrong.
    If I create a new sales document then, the creditmanagment checks with the wrong value from "total receivable" and that´s wrong.
    Line " where vbeln = lt_vbrk-vbeln
    and cmpnt space."
    in report LVFDSF02 is set.
    Thanks for your help
    Nicole

    After Apple tightened up some security issues the stores have been a bit more picky about the format of the billing address. Most folks who have encountered this issue have been able to solve it using the standardized addressing format created by the US Postal Service. Go to the USPS Zip Code lookup website and enter your address. Copy your address exactly as the USPS formats and presents it into your iTunes account.
    https://tools.usps.com/go/ZipLookupAction!input.action

  • Regarding Field Missing in Dso Transformation

    Hi
    Folks
    I am facing the issue like
    In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object  0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
    so How can i get the field in DSO to Cube transformation.??
    any settings have to be change???
    waiting for yours Valuable answers
    Regards
    Anand

    Hi,
    Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
    Regards,
    Srinivas

  • Tables for Profit center and Risk Category

    Hi,
    Can anyone please tell me in which tables the values for profit center and risk category is maintained at.
    Thanks
    Lilan

    Hi Lilan,
    Profit Centre's Data element is PRCTR. You can just press Where used button by going into SE11 and see in what scenario you need this field.
    Because PRCTR field is maintained for Sales Order, Production Order tables and many other tables.
    You need to look into ur requirement that what scenrio u are working in.
    Please award points if helpful.
    Regards,
    Himanshu.

Maybe you are looking for