Risk Management Customization / Incident Loss Database

Hi there,
is anyone familiar with Risk Management 2.0? I'm struggling with the incident loss database - especially with the "segment settings" Could anyone explain the idea behind this?

Hi,
page 3 in [this|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/001f44e8-7710-2c10-b9b3-a226d934f0b6&overridelayout=true] presentation gives a good intro to the ILD - most of that document is on the segment settings...
Cheers,
Dominic

Similar Messages

  • Enterprise Risk Management Approach in SAP GRC

    Hi All,
    Can you please let me know  as to what is the approach followed for implementation of  Enterprise Risk Management (ERM) in SAP GRC.  Also please tell me how the internal control frameworks like COSO, COBIT is mapped to ERM in SAP GRC.
    Regards
    Vivek

    Dear Vivek,
    While assigning roles to users, you will be displayed the risks that are identified with those roles, if any. You can either mitigate or remove the roles.
    The process covered by GRC Risk management includes the following steps:
    -Risk Planning: Determines the approach to risk management in each business area or project. This includes setting up the risk management organization and defining risk thresholds . This phase is partially supported by a software application.
    -Risk Identification and Analysis: Identifies the risks in order to analyze and prioritize them along different attributes, such as probability of occurrence and potential total loss associated to the risk.
    -Risk Response: Decides on actions needed to respond to a risk. One action could be to actively mitigate the risk to reduce probability of occurrence and/or potential impact.
    -Risk Monitoring: Includes the regular update of risk information and the risk reporting to monitor progress along the risk management process.
    The Risk Management application provides a set of different reporting capabilities based on the individual needs of the target groups:
    -A set of built-in reports that are delivered with the application. These reports allow risk managers to review the current risk state.
    -Visual Composer based dashboards that provide information about the current risk status on an aggregated basis. The dashboards fulfill the risk reporting needs of senior managers and line managers.
    Step 1: You maintain the Risk structure
    1. You set up the organizational hierarchy
    2. You set up the Activity Hierarchy
    3. You set up the Risk Hierarchy
    Step 2: You perform the Risk Assessment
    1. You identify the risks
    2. You analyze the risks
    3. You respond to risks
    4. You document the Incidents
    Step 3: You analyze risk reports
    1. You generate risk reports
    2. You report the incidents
    Step 4: You analyze the dashboards
    Refer SAP documentation on GRC for more information.
    Regards,
    Naveen.

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • How SAP Risk Management may be interfaced with SAP Strategy Management?

    Hello,
    Any document, any customer experience around integration between SAP BusinessObjects Strategy Management and SAP BusinessObjects Risk Management would be very appreciated.
    Best regards
    Jean-Luc

    Hi Renaud,
    where you able to create your webservice and use it from GRC RM?
    If yes, I would be interested in - 'How do i connect SAP RM 3.0 with that web service'
    Regards
    Holger

  • Minimum steps required for Change Management and Incident management

    Hello experts,
    Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
    I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
    The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
    I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
    Thanks in advance.
    Regards,
    Kenneth

    Hi,
    There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
    Check these to start:
    http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
    The Complete ChaRM Solution
    Change Request Management scenario: Usual questions and known errors
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    Regards,
    Jan

  • Risk Management interactive reports drill up error

    Hi,
    I have been working with Risk Management 10 in SAP GRC recently.  I noticed that when using the Risk Manager Interactive Reports in the Report section (Heat Map and Overview Report), I have received an error when trying to drill back up to the parent organizational unit after I have drilled down to the child sub organization.
    Our current workaround is to click on the <All> unit, close the window, and then reopen the window and drill back down to the parent unit.  While this workaround has been successful when using the reports so far, it is difficult to communicate this error to other users when they attempt to use the reports.
    Are there any fixes to this error, or any plans to fix?  Otherwise, is there a feature that needs to be adjusted in Risk Management?  Thanks.

    Bump

  • BC sets activation for GRC 10.0 Risk Management

    Hi ,
    I am new to  Risk management,please suggest  the required list of   BC set for activation.
    Thanks in advance,
    Varun

    Hi Varun ,
    Apart from the common BC sets , You also need to activate RM Specific BC sets.
    You can find the list in  Installation Guide " SAP Access Control, SAP Process Control, and SAP Risk  Management 10.0/10.1"
    ( https://websmp108.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000718172 )
    Here is the list for your quick reference:
    BC_SET_ANALYSIS_PROFILE
    BC-SET_ACTIVITY_TYPES
    BC_SET_BENEFIT_CATEGORY
    BC_SET_DEFINE_CATEGORIES_POWL
    BC_SET_DEFINE_THREE_POINT_ANALYS
    BC_SET_DRIVER_CATEGORY
    BC_SET_IMPACT_CATEGORY
    BC_SET_IMPACT_LEVEL
    BC-SET_INFLUENCE_STRENGTH
    BC_SET_MAINTAIN_DEFAULT_QUERY
    BC-SET_MAINTAIN_OPP_RESP_TYPES
    BC_SET_MAINTAIN_USER_RESP
    BC_SET_OBJECTIVE_CATEGORIES
    BC_SET_PROBABILITY_LEVEL_ID
    BC_SET_PROBABILITY_LEVEL_MATRIX
    BC-SET_RESPONSE_EFFECTIVENESS
    BC-SET_RESPONSE_TYPE
    BC_SET_RISK_APETITE
    BC_SET_RISK_LEVEL
    BC_SET_RISK_LEVEL_MATRIX
    BC_SET_RISK_PRIORITY_MATRIX
    BC_SET_ROLES
    BC_SET_SPEED_OF_ONSET
    BC-SET_LOSS_MATRIX_COLORS
    BC_SET_UNIT_MEASURE
    BC-SET_RISK_RESPONSE_TYPE
    BCSET-GRRM-GRFNV_POLICYTYPE
    BCSET-GRRM-GRRMVPOLICYRESP
    BCSET-GRRM-GRFNV_POLICYTYPE 
    BCSET-GRRM-GRRMVPOLICYRESP 
    Thanks & Regards
    Uma Shankar T

  • SAP GRC 10.0 Risk Management - Forecasting Horizon Scoring Analysis Mode

    Hi everyone,
    In SAP GRC 10.0 Risk Management Support Package 7, we need to assess a corporate risk by performing an automatic analysis aggregation based on a scoring analysis profile.
    The problem is that corporate risks must be created based on a forecasting horizon.
    So, can we create forecasting horizons with scoring analysis mode? How? Must be enabled through customizing or applying a SAP note?
    Best Regards,
    Chema Traveso

    Hi,
    I think this is still user-specific, as it was in 5.X. I have checked the new GRC authorisation object parameters delivered within the roles and also tried to see if a Admin user was able to see all the variants created by the different users, but so far I have not found a solution.
    It may be worthwhile to raise this in "IdeaPlace", hoping it gets enough votes and SAP's attention for implementing in a future Support Pack delivery.

  • Intercompany with Risk management

    Hi SAP Prof,
    These is an issue with intercompany with multiple line items and each line item belongs to different company code...
                   I have created intercompany sales order with multiple items(Each item belong to different Ccode) and i have assigned the payment guarantee procedure in order at header level and saved the order..
                   Now,in my present company scenario i want to assign Finanacial Document in delivery at Header Level in Fianancial Processing Tab Page...
    The problem is that How can i Assign a single Financial doc.....?
                    If anybody knows the solution for the above querry then please let me Know....

    Hi
    Asper myt knowledge you can complete these settings:
    MM - Purchasing - Foreign trade /customs - Documentary payments - Basic settings
    1. Define a FI document type.
    2. Define the Bank Functions
    3.Define  Indicators for FI documetn. here you can maintainthe controls for FI document process in the order.
    4. Define bank indicators.
    same path in Relations
    1. specify the controls of Banks in FI document
    2. Specify the FI document control
    Same path  in Risk management of FI document
    1. Define forms for payment guarantee procedure
    2. Define and assign payment gurantee schema
    3. Activate documentary payments per itemcategory
    I hope it willhelpful.
    Regards,
    SK

  • How to install Oracle Change Management Pack for 11g database.

    Hi,
    I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
    Oracle Configuration Management Pack
    Oracle Data Masking Pack
    Oracle Diagnostic Pack
    Oracle Tuning Pack
    using following URL
    http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
    Regards
    DBA.

    As far as I could understand, this is a part of Oracle EM/Grid installation:
    The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

  • Risk Management & Process controls for non SAP client

    Hi Forum Gurus,
    I need clarity on the following:  Can Risk managment 3.0 and Process controls be implemented for a non-SAP client?
    i.e. Our client does not run SAP, but they are interested in RM and PC, so is this possible to implement?
    Any advice would be highly appreciated.
    Kind regards,
    PREVO.

    Hi Prevo,
    Process control and Risk management 3.0 are delivered within same installation package files so it is same for both the applications .
    Also real time agents for Oracle or peoplesoft are avaialble if you want to leverage the automated control functionality of PC 3.0 in non SAP environment.
    Remember the automated control functionality is the optional feature of PC3.0.If you wish only to use the manual controls features of PC 3.0 you dont need RTAs(real time agent).
    You can find further information about manual controls at http://service.sap.com
    use the quicklink '/rkt' then the following menu path: SAP Business Objects for GRC Solutions -> SAP BO Process Control 3.0 -> Technology Consultant
    Regards
    Debraj

  • Are GRC Access Control, Process Control and Risk Management separate?

    Are these 3 different modules that you have to purchase separately or are they included in one suite?

    Hi Anne,
    If you are refering to GRC Access Controls 5.3, Process Control 3.0 and Risk Management 3.0 - All 3 are separate.
    A new version of GRC 10.0 has been launched which is currently in ramp up. This has all the above 3 in one suite.
    Thanks and Best Regards,
    Srihari.K

  • Risk Management 10: Assign users based on Org structure

    Hello,
    In GRC Risk Management 10, you can assign users to a risk in the roles tab of a risk. 
    Is it possible to be able to assign any employee in HR org structure to one of these roles such as Risk Owner?
    More specifically, would it be possible to create a link such that only the employees in the assigned organization unit in the risk are shown in the list of users to be assigned to one of these roles?
    Thanks

    we have the scenarioas below
    need to integrate the third party HR system ORG structure entity to the Role based travle management approval task.
    but the process and workflow structure for all the department are same.
    only the roles are different for each user.
    no need to disple the standard  approval role in Process initiation.
    Custom role should be populated based on the selection from the first action.
    example: if the user need cash and he should select the cash need option from
                  first action then the finace approver should appear in next action.
                  if not it should not appear.
    please advice which GP callable object is best for this process.
    i have the plan to use the webdynpros..
    regards
    Sukumar

  • Risk Management in PS

    Hi everyone!
    Does anyone know if the there's any functionality in SAP to handle Risk Management?
    What the client needs to know is if SAP has any available tool to manage risks in project. When they are building up the solution for a client, they consider several risks that may arise. And during the execution of the project, they monitor those risks constantly. They can occurr or not, and sometimes other risks not detected can arise and have to be handled. Do you know if there's something in PS to address this?
    Thanks in advance!
    Regards,
    Thalos.

    Hi
    Yes, it is possible to handle risk management in SAP PS.
    Risk management need to consider the following:-
    a) Event: What could happen?
    b) Probability: How likely is it to happen?
    c) Impact: How bad will it be if it happens?
    d) Mitigation: How can you reduce the Probability (and by how much)?
    e) Contingency: How can you reduce the Impact (and by how much)?
    f) Reduction = Mitigation X Contingency
    g) Exposure = Risk u2013 Reduction
    Event you need to link with your network activities, means each activity you need to identify the risk involved.
    Probability and Impact of the risk should be recorded on each activity which can be done through user fields.
    For Mitigation and Contingency you can use DMS to maintain on each network activity.
    If any Risk/ event occurred on an activity which you can identify through user status, and reporting can be done through notification.
    If detailed mitigation plan need to be recorded you can record it through notification using class and charecteristics in order to record the values.
    Create a Query / Z report to analyse the risk.
    Tnx.
    Abdul

  • Error while accessing Risk Management 3.0

    Hi,
    I get the below error when I click on Risk Management navigation bar
    "Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 07:26_23/11/09_0002_2466451
    Refer to the log file for details about this exception."
    The error log is as below:
    07:26_23/11/09_0002_2466451
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;FPNInfo[IF_false PROCESS_RECURSIVE]&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;#39;SAP_LocalSystem&amp;#39;,
    Attribute: &amp;#39;client&amp;#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hi Amarnath,
    looks to me like an issue with the Portal System Object that point to your RM ABAP system, the exception states that
    "Cannot process expression <System.client> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: client"
    So it seems the client attribute is not maintained properly in the Portal Config...
    Cheers,
    Dominic
    Edited by: Dominic Yow-Sin-Cheung on Nov 25, 2009 8:52 AM

Maybe you are looking for