Risk Management interactive reports drill up error

Hi,
I have been working with Risk Management 10 in SAP GRC recently.  I noticed that when using the Risk Manager Interactive Reports in the Report section (Heat Map and Overview Report), I have received an error when trying to drill back up to the parent organizational unit after I have drilled down to the child sub organization.
Our current workaround is to click on the <All> unit, close the window, and then reopen the window and drill back down to the parent unit.  While this workaround has been successful when using the reports so far, it is difficult to communicate this error to other users when they attempt to use the reports.
Are there any fixes to this error, or any plans to fix?  Otherwise, is there a feature that needs to be adjusted in Risk Management?  Thanks.

Bump

Similar Messages

  • Interactive report gives an error only for a specific user

    An interactive report based on a very complicated select gives an error only when a specific user is logged on.
    The error is:
    ORA-00932: inconsistent datatypes: expected - got CLOB.
    For other users logging using this page it works fine.
    Authentication for this application is done using a stored function.
    The query does not use the current userid in it.
    Why does it fail for a specific user? if there is a problem, it should fail all the time.

    Hi ankur,
    By what you said the report dont have any date parameters or no date columns.
    "Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
    select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
    select to_date('01-DEC-06'),to_date('01-12-06') from dual;
    Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
    Hope its helpful.
    Best Wishes,
    Kranthi.
    Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

  • Interactive Reporting An Unknown error has occured

    I have a number of users that keep getting the following message:
    "An unknown error has occurred. Please save your document and restart your application."
    This error appears several times in Interactive Reporting. It happens when you are trying to copy and paste formulas into a spreadsheet. Also, the error has occurred when adding or changing a filter, removing a column, processing a query, changing column orders, copying and pasting from one window to another, removing a column, etc.
    Any ideas on why we are getting this error.
    Thanks
    Doug Pilot

    We have the same problem after applying the service fix. When we rolled back to the pre-service fix web client, we were unable to reproduce this issue so it seems the new web client is flawed.
    Are you on red hat linux too?
    We asked a couple of other implementations but they did not see this issue after adding the service fix.
    The related dbgprint entry we see is:
    Failure in removal of file:C:\DOCUME~1\ij24\LOCALS~1\Temp\ODSC6.tmp.
    Error: [13] <path specifies a read-only file>
    Exception thrown in v1_bi_code\bq\query\qryom.cpp, line 375: Error during Process
    Script(x):uncaught exception: Error during Process
    thanks,
    Insiyah.

  • Interactive Report ( IR ) graphics error 1095

    Hi,
    I am trying to create a graph on an interactive report, but when I try to run it, all I get is this message: Error #1095.
    Does anyonr know what it means and what to do to fix this?
    Igor

    SELECT wlji.LAST_UPDATE_DATE
    ,wlji.MODE_FLAG
    ,wlji.LAST_UPDATE_DATEYou have wlji.LAST_UPDATE_DATE twice. No problem, but give the 2nd one a column alias.

  • Interactive Report Unique Constraint Error

    Hi all,
    I have this error when trying to create an Interactive Report.
    ORA-00001: unique constraint (APEX_040000.WWV_FLOW_WORKSHEET_COLUMNS_UK2) violated
    Unable to create Dynamic Query page.
    I am not enabling Linkage to a single row, and I trid both UNIQUE key and ROW ID. The query runs perfectly on SQL COMMAND page.
    The query I am using is a little bit complex but not so much.
    SELECT wlji.LAST_UPDATE_DATE
    ,wlji.MODE_FLAG
    ,wlji.LAST_UPDATE_DATE
    ,wlji.LAST_UPDATED_BY
    ,wlji.CREATION_DATE
    ,wlji.CREATED_BY
    ,wlji.TRANSACTION_DATE
    ,wlji.FIRST_UNIT_START_DATE
    ,wlji.LAST_UPDATED_BY_NAME
    ,WLJI.CREATED_BY_NAME
    , (select organization_code from mtl_parameters where organization_id = wlji.ORGANIZATION_id) organization
    ,wlji.LOAD_TYPE
    ,wlji.STATUS_TYPE
    ,wlji.LOT_NUMBER
    ,WLJI.JOB_NAME
    ,( select msi.SEGMENT1 from MTL_SYSTEM_ITEMS_B msi where
    msi.inventory_item_id = wlji.PRIMARY_ITEM_ID and msi.ORGANIZATION_ID = wlji.ORGANIZATION_id) item
    ,wlji.START_QUANTITY
    ,wlji.SCHEDULING_METHOD
    ,wlji.ALLOW_EXPLOSION
    ,wlji.HEADER_ID
    ,wlji.WIP_SUPPLY_TYPE
    ,wlji.process_status
    ,wlji.GROUP_ID
    ,wlji.ATTRIBUTE11 ORIG_PARENT_ID
    ,wlji.ATTRIBUTE12 SEQUENCE_ID
    ,WLJI.ATTRIBUTE13 PREVIOUS_SEQUENCE_ID
    ,WLJI.error_msg || apps.MISWSM_SERUS_INBOUND_IFACE.get_tm_errors(OSFMLOG.TRX_TYPE,OSFMLOG.header_id) error_message
    FROM MISWIP.MISOSFM_INT_TRANSACTIONS_LOG OSFMLOG,WSM_LOT_JOB_INTERFACE wlji,WSM_INTERFACE_ERRORS wie
    WHERE OSFMLOG.STATUS IN ('E','F')
    AND OSFMLOG.TRX_TYPE ='LOT_JOB_CREATE'
    AND NOT EXISTS (SELECT 1 FROM MISWIP.MISOSFM_INT_TRANSACTIONS_LOG OSFMLOG2 WHERE
    OSFMLOG.PARENT_ID= OSFMLOG2.PARENT_ID
    AND OSFMLOG.SEQUENCE_ID = OSFMLOG2.SEQUENCE_ID
    AND NVL(OSFMLOG.PREVIOUS_SEQUENCE_ID,-1) = NVL(OSFMLOG2.PREVIOUS_SEQUENCE_ID,-1)
    AND OSFMLOG2.STATUS ='S')
    AND OSFMLOG.HEADER_ID = WLJI.HEADER_ID
    and WLJI.HEADER_ID = WIE.HEADER_ID(+)
    ORDER BY WLJI.ATTRIBUTE11,WLJI.ATTRIBUTE12,WLJI.ATTRIBUTE13;
    Why can't IR handle this joins?

    SELECT wlji.LAST_UPDATE_DATE
    ,wlji.MODE_FLAG
    ,wlji.LAST_UPDATE_DATEYou have wlji.LAST_UPDATE_DATE twice. No problem, but give the 2nd one a column alias.

  • Complaint Management Interactive Reporting

    Hi All,
    can i check if we have complaint management reporting available in Interactive Reporting?
    Thanks.

    In CRM 7.0 the following areas are supported in interactive reporting:
    - activities
    - campaigns
    - leads
    - opportunities
    - service
    In enhancement pckage 1 should be delivered also:
    - complaints (what you are looking for)
    - interacton recors
    - orders
    - quotations
    Regards.

  • Error while accessing Risk Management 3.0

    Hi,
    I get the below error when I click on Risk Management navigation bar
    "Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 07:26_23/11/09_0002_2466451
    Refer to the log file for details about this exception."
    The error log is as below:
    07:26_23/11/09_0002_2466451
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;FPNInfo[IF_false PROCESS_RECURSIVE]&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;#39;SAP_LocalSystem&amp;#39;,
    Attribute: &amp;#39;client&amp;#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hi Amarnath,
    looks to me like an issue with the Portal System Object that point to your RM ABAP system, the exception states that
    "Cannot process expression <System.client> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: client"
    So it seems the client attribute is not maintained properly in the Portal Config...
    Cheers,
    Dominic
    Edited by: Dominic Yow-Sin-Cheung on Nov 25, 2009 8:52 AM

  • 9.3.1.0 Interactive Reporting - Service Fix

    I have a problem with my current software, Hyperion support said I should download the 9.3.1.0.11 service fix for Hyperion Reporting and Analysis Client, but I looked all through edelivery.oracle.com and couldn't find it. Do any of you know where it is?
    "The files that need to be downloaded are:
    Hyperion System 9 BI+ 9.3.1.0.11 Service Fix Readme Hyperion.
    System 9 BI+ 9.3.1.0.11 Service Fix Windows.
    Check for the full Studio client 9.3.1.0.11 versoin.
    Please go through the Readme file for steps to apply the service Fix."

    We applied the fix and it resolved some issues for us. However, it seems to have introduced another problem.
    When more than one bqy is run and left open and we close one of the windows and try opening and running another small bqy, the web client freezes.
    The related entry in the dbgprint file is:
    Failure in removal of file:C:\DOCUME~1\ij24\LOCALS~1\Temp\ODSC6.tmp.
    Error: [13] <path specifies a read-only file>
    Exception thrown in v1_bi_code\bq\query\qryom.cpp, line 375: Error during Process
    Script(x):uncaught exception: Error during Process
    Anyone else experiencing this? We have a red hat linux distributed environment.
    I see a related entry in:
    Re: Interactive Reporting An Unknown error has occured
    thanks,
    Insiyah.

  • Attn Carl: Issue with interactive report and custom JavaScript

    I am trying to use interactive reports on the same page as a third-party JavaScript datepicker. The two components obviously interfere with each other, but I am not skilled enough in JavaScript to figure out why. It would be great if you could take a quick look.
    I am using the datepicker from http://yellow5.us/projects/datechooser/ (by the way, this is a really nice, lightweight datepicker that does not pop up a new window, and something like this should be built-in in the next version of Apex, instead of the cumbersome server-side popup that is currently in Apex. Consider this a post-3.1 enhancement request... :-).
    I have put up a simple demonstration page here:
    http://apex.oracle.com/pls/otn/f?p=36647:1
    When loading the page, Firefox complains (in the Error Console) that "event is not defined" on datechooser.js line 895, which looks like this:
    e = e || events.fix(event);
    (The error console in FF links to the full JS source code...)
    After the page has loaded, any clicks on the Interactive Report gives an error in the Error Console: "gReport has no properties".
    Internet Explorer (6.0) displays a similar warning message ("gReport.controls is null or not an object"), but the functionality (both datepicker and interactive report) still works.
    Would be eternally grateful if Carl or anyone JS-savvy could take a look at this problem...
    - Morten

    Hello,
    On line 931 of your file there is a call to attach the function to the window onload function
    events.add(window, 'load', function()......
    Try replacing that with this which is the way we do it in APEX , looks like that is where the conflict is.
    addLoadEvent(function().......
    I'm not sure this will fix it but hopefully it does, I can take a closer look tomorrow if it's doesn't.
    Consider this a post-3.1 enhancement requestCan you add to the enhancement thread.
    Regards,
    Carl
    blog : http://carlback.blogspot.com/
    apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

  • Interactive reporting : error while refreshing MSSQL data in Workspace

    Hi all,
    I recently work with Hyperion and I am facing an issue that makes me crazy.
    My configuration is simple :
    - 1 win2003 server with Hyperion Interactive Reporting services and workspace installed (both works properly)
    - 1 winXP machine with MS Sql Server 2005
    - My dev PC an winXP with IR studio.
    I created an IR report with a MSSQL query that retrieves data into a Table.
    The report is displayed properly and the data is OK.
    When I refresh the data in IR studio, everything is OK.
    I import the OCE file into the the workspace, following by the BQY file.
    The report is displayed properly in workspace with the correct data.
    I change the data in the MSSQL server and I try to refresh the report in the workspace.
    So, I open the report in the workspace and I click on the refresh button.
    But when I do that, I get an error message.
    I read somewhere that we have to configure the DAS.
    I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
    But when I try to add a new connection, I have only 4 choices for the type of database : Essabse, Financial Management, Planning and SAP BW.... No MSSQL Server.
    I hope that anyone among you can help me, but anyway, thanks for reading my post.

    You need to enter DATABASE details in DAS (Data Access Services) by running Service Configurator.
    Then run Remote and Local Service configurator to enter database details.
    ##I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
    This is something related to Financial Reporting.
    Hope this helps.
    Regards,
    Manmohan Sharma

  • Interactive Reports: Servlet error when saving as Excel

    Hi All
    Environment: Apex 3.1, Database 10g 10.1.0.5, Oracle HTTP Server: OAS 10g Release 2 (10.1.2)
    I'm getting the following error when trying to download an interactive report in Excel format.
    Servlet error: An exception occurred.
    The current application deployment descriptors do not allow for including it in this response.
    Please consult the application log for details.
    Can anyone shed light on this, I can't find any reference in the documentation?
    Is there additional configuration needed on the HTTP Server?
    Thanks
    Mark

    Check KM article id 1504257.1.
    It says following solution :
    1. On the FR server, navigate to Oracle \ Middleware \ EPMSystem11R1 \ products \ financialreporting \ bin.
    2. Double-click FRConfig.cmd.
    3. When the Java window (Java Monitoring & Management Console) pops up, click on the MBeans tab.
    4. Expand com.hyperion > Financial Reporting > Attributes.
    5. Locate the PrintServers entry.  Remove any invalid server names from the Value field.
    6. Stop and start the Hyperion Financial Reporting Web Application.

  • CRM Interactive Reporting - No data, Random Errors - C41 followed

    Hi All,
    We have followed like others on the SDN, the Config Guide C41 document for setting up CRM Interactive Reporting.
    I have two clients on the same box, one for CRM, the other for Reporting (REP).
    I have set up a myself connect and checked the OSS notes relating.
    I have ran /CRMBW/CONFIG_WIZARD on CRM and REP and all is green with a couple of warnings;
    The unique BI client for system CRD is '260' (logical system 'CRDCLNT260')
    Using CRM and BI reporting in the same client is not recommended
    I have checked OSS note about myself system and all correct, but this warning still comes up? Is this an issue?
    I also get the following;
    Source system connection using RFC destination CRDCLNT260 (should be CRDCLNT260_T)
    The connection is a Trusted connection following some notes & comments from the above warning. I had also created another RFC for this as CRD_260_T and made this a trusted as the previous, but this gave more warnings.
    BI_TCO_ACTIVATION is all green and i have checked every object in the REP client.
    After all this, if I run RSA3 in the CRM client and the OLTP transaction data sources bring back 0 records. I have checked the OSS notes around the myself and the authorisations for the Background user and for the admin user and all ok. I have run a trace also and nothing has come up.
    I also get errors in the Web UI when i try to run a report. It asks to check BSP_WD_EXCEPTION_DISPLAY in tx SAAB. I have followed the note on setting this up and this provides some error around a method XML_TO_ITAB. The method is active and syntax correctly. Is this a red herring?
    Can anyone shed any light on anything that is not in the guide, but is crucial for this to work?
    Many thanks Geoff.

    Hi Geoff,
    firstly, you seem to have done quite well so far if you completed the config wizard successfully. The warning about reportin in the same client being not recommended comes because you apparently also configured the BW client (REP) to be a client for interactive reporting. The wizard is supposed to run in the source client alone, not also in the BW client. But don't worry, it should not do any harm.
    The warning Source system connection using RFC destination CRDCLNT260 (should be CRDCLNT260_T) has the same reason: You run the wizard in the BW client, where the BW client is connected to itself via myself connection CDRCLNT260. Just leave it that way and don't change anything.
    Technically everything seems to be correctly configured. Now you are wondering why you don't see any data. This can have various reasons. Most likely, your user is not assigned as the person responsible to any sales document. For this to work, your user must be assigned to a business partner, and that business partner must be assigned to a suitable place in the CRM org model either as employee or manager. The employee must be the person responsible to all documents he wants to see in the reports, or a manager of such employees.
    The last problem about the Web UI is nothing I can help with. I propose you open another post on that.
    Best regards

  • Error creating interactive report

    Hi
    I get the following Oracle error when I attempt to create an interactive report:
    ORA-01446: cannot select ROWID from, or sample, a view with DISTINCT, GROUP BY, etc. ORA-02063: preceding line fromThe select statement I am trying to base the report on is:
    SELECT MAX(b.oracle_job_num)                                                          AS "Oracle Job Number"
          ,MAX(b.stream_id)                                                               AS "Stream ID"
          ,MAX(b.batch_id)                                                                AS "Batch ID"
          ,b.billing_pk                                                                   AS "Billing Reference"
          ,MAX(REPLACE(b.job_type_desc2,'_',' '))                                         AS "Job Type"
          ,MAX(b.file_date)                                                               AS "Date Recieved"
          ,MAX(b.total_docs)                                                              AS "Volume Recieved"
          ,SUM(NVL(d.total_docs_dispatched,0))                                            AS "Volume Dispatched To Date"
          ,MAX(b.total_docs) - SUM(NVL(d.total_docs_dispatched,0))                        AS "Volume Outstanding To Date"
          ,NVL(TO_CHAR(MIN(d.dispatch_timestamp),'DD-MM-RRRR HH24:MI'),'N/A')             AS "First Dispatch Date"
          ,NVL(TO_CHAR(MAX(d.dispatch_timestamp),'DD-MM-RRRR HH24:MI'), 'N/A')            AS "Last Dispatch Date"
          ,ROUND(SUM(NVL(d.total_docs_dispatched,0)) / MAX(b.total_docs) * 100)           AS "Percentage Dispatched"
          ,MAX(b.total_sheets)                                                            AS "Total Sheets"
          ,MAX(b.impressions)                                                             AS "Total Impressions"
    FROM billings b
        ,job_batch_dispatch_details d
    WHERE b.billing_pk = d.billing_pk (+)
    AND TRUNC(file_date) >= '25-APR-2008'
    AND UPPER(customer) LIKE 'B%'
    GROUP BY b.billing_pkPlease can anyone suggest what I need to do in order to get the report to work?
    Many thanks

    Paul,
    There should be more to that error message, that instructs you to change the "Unique Column" which is used to identify each row for the default drill-down link.
    If you are creating this report using the Create Page or Create Region wizard, try choosing "No" for "Link to Single Row View" below the query.
    - Marco

  • CRM Interactive Report errors

    Hi,
    We followed C41 to configure CRM Interactive reporting. I am still facing two issues.
    1) When I'm trying to run CRM Sales (eg: Closed Opportunities) report from SalesPro role, it is giving me error 'User does not have proper authorizations' although my ID have all authorizations. I am also assigned to Org Structure in Manager Position.
    2) I have added 'Manage Reports' workcenter to SalesPro role and I am trying to create new reports. Here when I select a Business Role in step 1, it is not giving me any Application Areas to select from.
    Could anyone please help me asap?
    Thanks,

    hi dipali ,
    u need to give proper authorisation in reporting client ,pl follow best practice guide to give authorisation to ur id in rep client.
    cheers
    ashutosh

  • Error while scheduling a Hyperion Interactive Report

    Hi,
    I'm trying to run a scheduled Hyperion Interactive Report (version 9.3.1). The report is scheduled to run for 1st of every month. After the report is scheduled. When a user tries to run the report on demand.
    The error log states as follows:
    $ view server_messages_IRJobService.log
    "server_messages_IRJobService.log" [Read only] 38 lines, 2688 characters
    <event logger="com.brio.one.services.bqservice.SERVICE" method="ThrID(7) Logger(ZDbgPrint)" timestamp="1247269603142" level="ERROR" thread="[ORB=_it_orb_id_1,Pool=1]::id-6" sequence_no="74">^M
    <time>10 Jul 2009 16:46:43,142</time>^M
    <context subject="TIPAdmin" session_id="zRMz99t6-00000122670ef701-0000-8197-0a3f0708" originator_type="IRJobService" originator_name="InteractiveReportingService" host="tsbrit02">^M
    <info type="RESOURCE">IBQServiceImpl::runJob Job Identifier: TIPPFSMRPT Service Name: JF1_tsbrit02 Cycle Name: Cycle_0</info>^M
    <info type="RESOURCE_ID">000001225ef102a5-0000-8197-0a3f0708</info>^M
    </context>^M
    <message><![CDATA[TCApp::ExecuteJavaScript failed: ]]></message>^M
    </event>^M
    ^M
    But when the report is uploaded and when the user tries running it. It runs without any problem.
    The report has 3 filters(drop downs) on runtime.
    Could anyone please help me in this regard.
    Regards,
    Sadiq

    check your discoverer user role using:
    select granted_role from dba_role_privs where grantee=upper('<username>');
    from your database. the database to which the desktop is connecting.
    check for connect, resouce, multiorg roles.

Maybe you are looking for

  • Need help to use 'When' clause in CTL file

    Hi, I have a requirement in ctl file while loading file names in to a table we need to ignore if the filename already exist in the table eg: load infile.txt into a when filename not in (select filename from a) append filename varchar(1000) is it poss

  • Ncomp under 8.1.7 on redhat 6.2 kernel 2.2.15

    Has anyone gotten ncomp to WORK under linux. I have working ejb samples, jndi (lots of cool stuff) but so far what happens is this I get errors (?) in my ncomp.log like this: -- got java.io.IOException: -classpath: not found when executing action: -c

  • Delete iphoto thumbnails from imovie

    Hi, I am using imovie for the first time and when it launched, it prompted if I wanna import movies from iphoto. And I clicked now, and it generated thumbnails for all the videos in iphoto. How do I delete these? I want to remove the link between iph

  • Delete function is hanging

    Hi all; I am trying to delete some data from few cubes using a delete function. This usually never give me any issues. But today all the other cube went fine but in one cube when I run this function its just hangs don't do anything get a message on t

  • RFC BAPI execution authorizations.

    Hi all. In my company development teams are trying to use SAP RFC connections in order to connect it's .NET, java, etc applications. They need a sap user to establish the connection and I don't know what authorizations (objects) I need to put in thei