Rlgge.exe This application could not be started

Hello,
Since yesterday, out of nowhere, this message keeps popping up: rlgge.exe This application could not be started.
When I click "yes" to see what is that about, the Microsoft Support suggests that I cannot solve this problem by myself. That I have to contact the app vendor to resolve the issue.
However, I don't know what app vendor I have to contact, or how I do that. Because I'm not trying to launch any app, or anything at all, when the message pops up. I have Windows 8. When this message started showing, I was only doing some research on the
internet and using Word. That's all. While I write this message, it have already popped over 10 times.
I've used CCleaner and nothing happened... I don't know what extension is that, I've searched through my entire computer and found nothing...I've even tried to disable the google chrome extensions just in case. I don't know whats going on. The message keeps
popping every 30 seconds or so. Is this some kind of malware?
Please, someone help me.
Thank you

Hi Mfadul,
We wonder if there is any luck your issue has been resolved, if you've found solution by yourself. We would appreciate it if you could share with us and we will mark it as answer.
I didn’t find anything about rlgge.exe online so we might need your system information to check what program you are running as what mentioned by XP ROCKS.
Also could you please check this issue under clean boot so we can narrow down that if this application was call by system or some other software.
More information about clean boot
https://support.microsoft.com/en-us/kb/929135
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

ServerManager.exe - This application could not be started. - Windows Server 2012 R2

Hello All,
We have a Dell Precision M4800 installed with Windows Server 2012 R2, and we are unable to get the Server Manager working. When we click on ServerManager, the below error occurs,
Error Message: ServerManager.exe - This application could not be started.
Action Taken:
1. Windows Updates, and Windows Security Updates are up-to-date, rebooted
2. Display Drivers are updated, rebooted
3. .NET Framework 4.5.2 is updated, rebooted
Still the same error. Please assist.
Thank you, Anand
Anand Franklin

Hi,
Thanks for your post.
Usually, ServerManager.exe error may be caused by:
The registry key of ServerManager.exe is invalid or damaged.
Computer malware has injected malicious code and modified ServerManager.exe file.
The ServerManager.exe file was uninstalled by other software.
The ServerManager.exe file was intentionally or mistakenly deleted by other software.
The required version of ServerManager.exe file is overwritten by other software.
There is a hardware failure, such as a bad hard disk.
You can use the following solutions as the article mentioned to fix ServerManager.exe error:
http://www.fixerrorhelps.com/fix-pc-error/how-to-fix-ServerManager.exe-error.html
If all the suggestions did not work, i think we need to reinstall the Operating System.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?

Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank you

With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

TS1717 Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

Solving MSVCR80 issue and Windows iTunes install issues.

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.

I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?

Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
Just for the record, I did not have this folder: C:\Program Files\iPod\
Emptied the Recycling Bin.
Shut down and fresh start-up.
Install attempt again: results in the installer saying something interrupted it (no other programs open)
Installing again immediately after error: Success
Clearly there are issues with this installer.
A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
Thanks Kappy. Thanks for the time suck Apple.

This application has failed to start because smerrlog.dll was not found.

I wrote some code call crystalreport with VB. Net. Sometime, we encounter the error "This application has failed to start because smerrlog.dll was not found". Is there anyone know this? I can't find the smerrlog.dll file in my system, but the report works well. Does anyone konw this file. What usage it has?
Thanks in advance.

Hi Guys,
You need to download the latest set of patches and their matching set of merge modules.
Those files belong to Computer Associates now and their Siteminder Security plug in. It ships with CR products.
There should be 3 files: SmAgentAPI.dll, smcommonutil.dll and smerrlog.dll in the \system32 folder. According to other sites liekly you are missing the smcommonutil.dll or it's out of date.
To get the latest merge modules and service pack click on these links:
https://smpdl.sap-ag.de/~sapidp/012002523100001088442009E/crxir2sp5_net_mm.zip
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
There are updates to those also but this gets you to SP5.
As a quick fix try copying them manually and test again.
Possibly some other application on your PC's is using SiteMinder security and Cr is trying to load them but then they are not required and carries on once you click the OK button.
You could add in logging in your app and find out what API is being used at the time and use a try/catch method and if the exception pops up catch it and ignore it so the end user doesn't it.
Thank you
Don

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

This application has failed to start because msvcr71.dll was not found

Hi,
I just downloaded the Flex 3.3 DK from here:
http://www.adobe.com/cfusion/entitlement/index.cfm?e=flex3sdk
Once unzipped I went to run this:
C:\DATA\My Documents\_jim\flash\open-source\_Software\flex_sdk_3\bin\mxmlc.exe
When I ran it, I got this error
This application has failed to start because msvcr71.dll was not found. Re-installing the application may fix this problem
I searched on Google, and found this:
http://www.flashdevelop.org/community/viewtopic.php?f=13&t=2932&start=15
So from there, downloaded "msvcr71.dll", placed here:
C:\WINDOWS\system32
And ran the following in the Command prompt: regsvr32 "msvcr71.dll".
When I did that, I got this error message:
msvcr71.dll was loaded but the DLLRegisterServer entry point was not found
The file was not registered
I saw that the DLL is related to Microsoft Visual Basic Runtime, so I deleted the dll I saved manually, and ran the Microsoft Visual C++ 2008 Redistributable Package (x86) from here:
http://www.microsoft.com/DOWNLOADS/thankyou.aspx?familyId=9b2da534-3e03-4391-8a4d-074b9f2b c1bf&displayLang=en
Once done, the dll was not placed in the System32 folder.
I tried the manual install of the DLL again, but on trying to register it again, got the same error message.
Has anyone else had this problem?
Seems like I might have hit a brick wall.
Thanks

What operating system? 32-bit or 64-bit?
Which version and edition of SQLDeveloper (with/without jre, 64/32-bit)
What JDK version?

HT6001 I have tried numerous time to update iTunes to Version 11.1.4. Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found". Also I get a message of "Error 7". Advise please.

I have tried numerous time to update iTunes to version 11.1.4. It has failed every time. Now I can't even get into iTunes on my PC. The message I get is "This application has failed to start because MSVCR60.dll was not found. Re-installing the application may fix the problem." Okay. Which application? What steps are needed for this process?
Also, I get this message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" Could someone please assist me in the steps necessary to remedy this issue. Thanks.

For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Help! "The iTunes application could not be opened. You do not have enough access privileges for this application"

I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confused as to why this would start happening all of the sudden.
I poked around in the control panel trying to find random options that would fix it, but nothing has. I'm running Windows 7.
Thanks for any help!

have you seen this discussion ?

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

ITunes will not open, get error message 7(windows error 126) this application has failed to start because d3d9.dll was not found. re-installing the application may fix this problem. well i did and did not fix anything.

this application has failed to start because d3d8thk.dll could not be found. I looked that file up and it seems its part of directx. i installed directx again but that still did not help.

d3d8thk.dll
That one is a DirectX 8 module and might not be included in the most recent DirectX 9 redistributable available from Microsoft. If it's been installed as part of a partial DirectX 8 install (as part of a game for example), that can cause the issue. Can you track down a full DirectX 8 redistributable? If so, if you install that, does that clear up the iTunes error?

FAIL - Application at context path /webapp could not be started

Hi,
I have the code under c:\my_name_ccview\source\code\MyWebApplication.
I use Netbeans 5.5.1 and bundled tomcat 5.5.17. I can compile and build the MyWebApplication.war file.
In the context file I defined <Context path="/webapp">
</Context>
When I try to deploy it to the bundled tomcat I get the error FAIL - Application at context path /webapp could not be started.
I also tried building the application and then try Run Debug without deploying application. Still the same problem. My application wont start. When I check the runtime tab on netbeans and check applications under bundled tomcat I see /webapp -[stop]
Please any help is much appreciated

What you should do is test ur application by deploying it in the examples folder of tomcat and them try to run it and it will work. But this is only the temporary solution.

Rlgge.exe This application could not be started

Similar Messages

Maybe you are looking for