RM consumption & value
Dear All ,
Can we get the RM consuption from date to date & value of raw material consumed ?
pl guide
regards
Consumption do happen with some particular movement type (201,261 etc).
So you can use MB51/MB5B where you can use the movement type,posting date and in the material column through multiple selection use material type of rawmaterial as input
Regards,
Indranil
Similar Messages
-
Standard Report to check consumption values for multiple materials
Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
SwapnilDear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF Material analysis: Dates
MCPO Material analysis: Quantities
MCPW Material analysis: Lead time
Regards
Mangalraj.S -
Updation of Consumption values in material master
Dear Experts,
For a FERT ,
When I use strategy 40 , Consumption values ( PGI - Deliveries )are getting updated in MM02 in Forecast view.
whereas,
When I use strategy 50 , Consumption values are not getting updated in MM02 in Forecast view.
Is there any setting to control this updation of Consumption values in Material Master ?
Regards,
SheikHi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks. -
Consumption values in Forecasting View
Hi gurus,
We are configuring automatic reorder point planning and we have a problem with forecasting based in consumption values. System has only consumption values for periods 4-08, 5-08 and 6-08. Concretely, a material has next consumption values:
Period --- units
4-08 --- 0
5-08 --- 0
6-08 --- 20
The model used is G Moving average. Result for this forecast should be 0020/3, but system calculates on this form 20/3, because periods 4 and 5 are not in account. Hist.Periods is 60 and Initialization pds is 60 also.
We need periods 4 and 5 are in account. Is a problem of system?
I will reard with points all answer!!!Dear colleague,
please check the following notes, they allow you to change the standard procedure when the historical values are zero.
506821
1145764
1113277
Dear colleague,if your question is solved set the thread as 'answered' and give points to the useful replies
thanks for your cooperation.
best regards -
LSMW error in material consumption value upload
Hi Guys,
I am using standard program RMDATIND for creating LSMW to upload consumption value for materials , i am getting error consumption period can not be determined, can anybody tell me what period format should be used?
Thanks and regards
Thamizhchelvan GHi,
It would be helpful if you have identified the issue.
Please let us know the resolution, which would help me.
I am facing the same issue.
Thanks
Sudheer -
Methodology that confim the consumption Value is correct with our Actual Su
hI,
What is the methodology that confim the consumption Value is correct with our Actual Supply.I've only seen this once before in a ConfigMgr 2012 RTM environment and after fighting it for a few days I ended up simply recreating the driver packages.
-Nick O. -
Book out the Consumption value from the planned consumption
Hello everybody,
i am going to develope a consumption report, is there a BABI or Something Like This that available to book out the Consumption value from the planned consumption? (to unplanned consumption)
Thanks
Best regards.
DANI.I am currently working on a SQVI report just a prototype prior to having the programmer create an ABAP report. The trouble I am having is truly understanding how SAP tabulates the consumption. We are putting significant effort into this report and will let you know the results.
-
Update Consumption Value in EDM Profile From Meter Readings in DM
Dear,
Can it be possible that consumptions values from meter readings (for non interval readings / Non AMR meters) in DM imported / transfered to profiles in EDM.
Sohail AshrafIn general non-interval measured point of deliveries are dealt with by a synthetic profile.
The synthetic profile is assigned to the installation and can be normed, e.g. to 1000 kWh.
In most cases you will have several synthetic profiles, where each one is used for customers that have such a profile.
Then in billing the usage factor is updated in such a way that the usage factor * normed consumption = actual consumption of customer. So if the customer consumed 2600 kWh the usage factor would be 2,6 for that period if his synthetic profile is normed to a 1000kWh. -
from mbew table i want budget consumption value which field i have to consider
urgent
reagrards
anilHi Anil,
I want to modify BudgetConsumption. I have downloaded com.sap.pct.fin.projectbudgetconsumption.par file but It does not have any Java source. Do you have Java source with you for BudgetConsumption. Could you please send me.
Thank you in advance
Regards
Maruti
[email protected] -
Can we know the total consumption of a text item in a bom over a period of time.
Or can we know the consumption values of a phantom assembly
Or is there a bom item which is not to be stocked , but thier quantity in bom multiplied with the order quantity could be displayed over a period of time.Text items and phantom items are never consumed and hence you will never see it in any consumptipon report. You may have to build custom report if needed ( or change the item to be standard).
cheers
rav -
Bapi for Periodwise consumption values in MM
HI,
I need a bapi or funcation module for Periodwise consumption values in MM .
Thanks,
babutry this
BAPI_MATPHYSINV_GETDETAIL
Parameters
PHYSINVENTORY
FISCALYEAR
HEAD
ITEMS
RETURN
ags. -
Consumption values not getting updated on the material mastere
HI Gurus,
can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
Thanks
AnushgaDear ,
Use tcode - OMJJ and then do the following setting -
for movement - 261,262, 201 and 202
Statistically relev. - 2
Consumption posting - R
for movement - 701 and 702
Statistically relev. - 2
Abhinay
Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM -
Consumption values get updated in the table MVER
Hi,
Can anyone explain me how the consumption values get updated in the table MVER?
If you have any doucments,it will be better......
Thanks
Srinihi,
When ever you do the GR for the consumption postings, the material gets updated in the respective table...
You can see the table in SE16 tcode...
There is ABAP coding linkages, in which all the fields are stored in the forms of tables in the std sap system...
Hope it helps...
Regards
Priyanka.P
I request you to close the threads once you get the satisfied answers... -
Dear friends
where can i enter the annual forecast values, these values r updated absed on the current market req prepared as 5 weeks demand requirement, where can i enter this 5 weeks rolling plan. how its going to affect the annual forecast values. some of the key material have to be procured at least 4 month before. pl guide me.
thanks
ShivaniHi
system updates consumption values in the forecast view of mat master automatically
movement type it considers for consumption. normally the consumption will happen for the components only in which the it is consumed in the finish product.
a. for components - mvmt 261
Do GI for the component and check in the material master forecast view, in the cosumption tab , the value ge updated for the particular material.s
Edited by: raj on Jun 17, 2009 8:40 AM -
Letter of Credit consumption value and open value
Hi Friends,
I have created a Financial Document for my Letter of Credit (LC) value of Rs.1000.
I have assigned the same to the sales order for the value of Rs.800. So the available value in LC is Rs 200.
Next I create one more Sales order against this LC for Rs.400. This order went to block as the open LC value is not sufficient.
When I check the available value for the LC, it is still showing as Rs 200 and the consumed value as Rs 800. It is not considering the Rs 400 of the blocked sales order.
Question: Is this standard behaviour or are there some settings missing due to which the blocked sales order value is not being considered towards LC consumption. Is there anyway by which the blocked sales order value would also come under LC consumption.
Thanks & Regards,
SajiAs the Sales Order is blocked, its value will not be considered in LC's consumed value. This is pretty much standard.
I don't think is wouild be possible with Standard settings to include the Blocked Order Value in LC Consumed Value.
Hope this helps,
Thanks,
Jignesh Mehta -
Difference in consumption value of finished goods or work in progress
The increase in FG or WIP values from one period to another period should reflect in increase in consumption of FG or WIP values for same period. There is a difference of Rs 3,75,72,667.06 when the data is extracted from th e system from Apr 2011 to Feb 2012. Two excel documents are herewith attached for reference
The increase in FG or WIP values from one period to another period should reflect in increase in consumption of FG or WIP values for same periodHi Ajay.
Understood your query as you concerned about.
can you elaborate 1 FG example with 2 respective month with system behavior & representing the system actually rather than analyzing excel with whole year data.
Regd,
Khan.
Maybe you are looking for
-
Making use of a schema in SAX/DOM? (w/jdk 1.5 xml libraries)
I have a simple function that I wrote to validate some xml... public void validate(String xmlURI) throws SAXException, IOException { XMLReader parser = XMLReaderFactory.createXMLReader(); parser.setFeature("http://xml.org/sax/features/
-
Help me. My friend was helping me download some ringtones. She hit a button that said "Erase and Sync." It erased all my music. Now, my iTunes won't let me re-sync the music. Please help, I can't figure it out.
-
Hi What is mean by on time account when i am posting f-53 i am getting erro my client suggested pls check on time account Regards Babu
-
Public private etc, what are they???
I know what private & public are, but what is protected, synchronised etc. can anyone give me a full listing of all the types and quick defenitions?? Shish
-
Using java to retrieve windows password
Is there any way to get Java to retrieve the windows password?