RM Error: No ports that send to the Integration Server could be found

Hi,
In the Runtime Monitor, End-to-End Monitoring Configuration, Logon to XI, Display-->
It is showing the following error:
No ports that send to the Integration Server could be found for the following ALE logical systems:
ZSEND765: Unable to log on to system IDS in language en with user PIRWBUSER
Plz help in solving this.
Regards,
Balaji

Hi,
please check if user PIRWBUSER is locked and if he has enough rights:
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
Regards
Patrick

Similar Messages

  • A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

    When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
    This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
    I am using Windows 7 64 bit.  
    Many thanks

    I was able to download and install the latest version of iTunes  (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
    If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
    Still seeking advice if possible
    Cheers

  • Firewall: Error sending to the socket, server is not responding.

    Hi all,
    I'm trying to connect AIX machine to NT DB2 Database through JDBC with a firewall. I'm using the standard port 6789 in JDBC Applet Server in NT DB2. But I've gotten the following message:
    COM.ibm.db2.jdbc.DB2Exception: [IBM][JDBC Driver] CLI0614E Error sending to the socket, server is not responding. SQLSTATE=08S01
    The connection chain I'm using for AIX side is:
    jdbc:db2://192.168.3.4:6789/DATABASE
    I've configured the firewal to allow the port 6789 to be used, and also the other port 51544 (it's for remote administration, I think). I've also checked that wires and other stuff is working fine, but stil I cannot connect to the Database.
    I don't know if there's something missing on the firewall configuration. Before, everything was working without the firewall.
    Any help will be apreciated, THanks.
    Rodrigo, SPAIN

    It looks like no port problem is happening, because we freed all the ports just to see if client tried to use some of them without our knowing. But it was still the same.
    We were thinking about routing issues, but we were able to ping from client to server, and ports 6789 and 51544 were open as well. Maybe JDBC Client Driver is looking for an different IP address than 192.168.3.4. We know the firewall doesn't receive any query from JDBC Client, and that's very strange because if you see the routing tables in AIX machine, the default route is the firewall. Of course, there's not any other static defined route for the server (192.168.3.4), so it's supposed that default route is going to be used. But it's not.
    We also restarted client machine from scratch but nothing. Maybe this problem happens because there's something wrong in AIX networking settings.
    Rodrigo

  • I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

    I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
    Thanks

    Hi Ozy08,
    Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
    If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
    Thanks,
    Preran

  • How do i turn off the option that sends all the messages i receive to all other linked to the same computer? on this

    how do you turn off the option that sends all the messages i send, when i send them who ever is linked to the same comuter is also getting all the messages. help

    don't share apple id or the email address linked to imessages. see in settings/messages.

  • An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH

    Hi, I am receiving emails but whenever I try and send I get the following message:
    unable to send emails An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready..

    What are your settings in Tools(or AppMenu/Options)/Account Settings/Outgoing Server (SMTP)? The error message suggests you must have STARTTLS connection security and normal password authentication:
    https://getsatisfaction.com/mozilla_messaging/topics/mail_preferences-t1xeq

  • Issues with processing messages on one receive port causes problems on all the receive ports that are on the same handler

    Greetings,
    An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
    problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
    The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
    same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
    What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
    Thanks in advance.

    What do you mean exactly with this question?
    "Can you provide some more detail like BizTalk the receiver? "
    The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
    The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
    reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
    Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
    port) that can't process its messages. Or rather by one receiving software that can't process its messages.

  • When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

    When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

    Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
    If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
    Also what is the version of ACR in the title bar?
    Gene
    Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • BAM Connection in 12C -  Failed to establish a connection to localhost at port 7004.Please verify the Bam server host and JNDI port.

    Hi,
    BAM server is running on 7004 in our local system.
    We need o connect to BAM server from OSB service.
    We tried to use the BAM adapter in the pipeline in 12c, We received Failed to establish a connection to localhost at port 7004.Please verify the Bam server host and JNDI port.
    Please let us know the resolution to this issue.
    Also please provide some links/steps to connect from OSB service to BAM server in 12c.
    Thanks,

    In BAM 12c, you can send data via JMS by configuring an EMS in BAM using the "self-described" payload. Make sure the date formats match correctly. You can configure an error queue which will show you any data parsing problems.
    For example,
    <msgRoot dataObjectName="Student" operationType="insert" keys="RequestId">
       <RequestId>R1000</RequestId>
       <StudentId>S12345</StudentId>
       <RequestType>Admission</RequestType>
       <RequestStatus>Open</RequestStatus>
       <RequestMessage>Please Admin</RequestMessage>
       <RequestCode>3</RequestCode>
       <SubmitTime>2015-03-17 18:23:07</SubmitTime>
       <ApprovalTime>2015-02-18 18:23:07</ApprovalTime>
    </msgRoot>

  • I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names

    I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names.  I can still connect to iTunes store and I can still summit track names to the CDDB server.  I just cant recive the names from the CD's.  I read this problem on the community and I've checked that the  proxy server from Lan is unchecked.  I use a verizon wireless card for my internet if that matters.

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Why the modem deconncts frequently with this error message, "You were disconnected by the PPP server. Try reconnecting."? Please, help me out.

    Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last few months, I have used it with Mac OS X Mavericks. There was no problem. Some days ago, I downgrade to Mac OS X 10.8.3, because I was fed up with different bugs in 10.9. Anyway, the first two days the connection were fine. But, after that, The problem began from no where. I tryed everything i could, but, It didn't help.
    Please, help me out. It's very disturbing frequanlty disconnection. I am mad at the PPP is like, if I found standing it in front of me, I would beat it with a bat, who gave this so called Mr. PPP permission to disconnect my connection as it's wish!

    Hi I'm having same issue since last week and now unable to reconnect. Not sure if it's an issue with the mobile company, modem or apple .
    Before was able to connect eventually now connects and drops connection after 3 seconds . Using macbookpro early 2014 mavericks all ipdate - modem 4G Huawei
    Haven't found any info to assist us
    Hope someone comes forward soon
    Thanks and good luck !

  • Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

    Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

    mithaani wrote:
    Got an (unlocked) iphone 4s from US
    As kb1951 states, unless this phone was purchased directly from Apple, it is not officially unlocked. In the US, only Apple sells officially unlocked iPhones. The message you got generally means your phone was hacked to unlock it...jailbroken...Apple's servers have detected such & are preventing your phone from activating...there's nothing wrong with the activation servers.
    You'll need a sim card from the carrier your phone is locked to in order to activate it. If you don't know what carrier, you'll have to call AppleCare in the US to determine this info. Be aware, US carriers will not authorize official unlocking unless you are a customer that used the phone on their network. Thus, there is most likely no way for you to get this phone officially unlocked.
    Good luck.

  • During itunes sync i get an error message "iphone cannot be synced. the required file cannot be found." Why is this happening?

    During itunes sync i get an error message "iphone cannot be synced. the required file cannot be found." Why is this happening?

    Close "iPhoto" if it is open. Open the "Pictures" folder and right-click on "iPhoto Library." Select "Show Package Contents." Right-click the "iPod Photo Cache" folder, select "Move to Trash" and sync your iPhone. The error message should no longer appear.
    if that doesn't work,
    uninstall itunes and download the lastest version

  • Error when publishing crystal report to the BO server

    Hello All:
       Has any one encountered the following error when saving a report to the BO server.
       Unable to launch C:\program files\Business Objects\BusinessObjects Enterprise 11\win32_x86\plugins\desktop\CrystalEnterprise.Report\ReportAdd program to add report to the system .
    ....Would appreciate your help.
    Thanks
    Parmesh

    Hi,
    looks like a Bug here.
    heck SAP Note - 1183390
    Regards
    -Seb.

Maybe you are looking for