RMA and still same problems! (Neo2 Plat)

I was having the system shut down over night problem where nothing woudl turn on, no fans on anything, not even the powersupply. So I tested my Powersupply on a friends computer and it was dead and I also tried numerous power supplies on my motherboard and it was dead alos. So I had the power supply and motherboard RMA'd and got it put back together today and I am still having the same problems!!!!@ !
I hooked up the CPU, ram, and video cards just to see if it would start up; nope, I hear a crackling noise coming from the brand new powersupply, but the fans start spinning on the powersupply but nothing else. What else could be wrong, could my CPU be dead??? I only hear the crackling noise when I have the 12V connector plugged into the motherboard and this is where the CPU gets power from correct? Could I be in need of a new processor? I tried my ram video in other systems with no issues so its seems the cpu is the only thing left......@#$%^
SYSTEM SPECS:
MSI Neo2 Plat.
Enermax 485W +3.3V@32A, +5V@32A, +12V1@18A, +12V2@15A, [email protected], [email protected]
AMD 64 3000+
PDP 512x2 TCCD RAM
ATI 9800pro
2x Western Digital HDD 80gb
NEC DVD-RW
Lite-On CD-RW

I had a similar issue. Shut it down over night. Next morning I removed the HSF to install AS5. When I put it back together, It wouldn't boot. The D-bracket at 4 red LED's, which means "CPU damaged or not installed properly".
So I sent my CPU to AMD for testing, and It wouldn't post for them either so they sent me a new one. RMA'd the MB also. Got the "new" MB/CPU back together and have had no problems since.
What does teh D-bracket hang on?

Similar Messages

HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I downloaded the itunes update today and now my itunes won't work at all. It keeps saying I don't have MSVCR80.dll installed and to reinstall itunes. I have tried to reinstall it 3x and still same problem. Now I can access anything on my itunes. Help!

It keeps sating that MSVCR80.dll did not install correctly and to try installing Itunes again. I have tried installing 3x and still same thing. I cannot access any of my music, podcast or books on itunes, it won't open. What can I do?

You need to restore your iPad using recovery mode and the process is covered in this article.
iPad: Unable to update or restore.
http://support.apple.com/kb/ht4097

Fresh snow leopard install and still same problem. Please help :(

hello.
After 10.6.3 update....
I had issues with trackpad and keyboard freezing on my early 2008 macbook pro.
I have tried to reset pram, nvram, smc, onyx maintance everything i could think of.
So i decided to wipe hard drive clean and do fresh install. Everything was working fine until i applied 10.6.3 update.
Is there any fix for this yet ?
It still doesnt work good even with fresh install of snow leopard and 10.6.3 update.
Thank you

I've read a lot on the Internet about alien UFO crashes too, but that doesn't mean it is a good idea to take them at face value.
If something doesnt work after clean install then thats updates issue.
Not necessarily, at least if you mean the OS update itself. Do a little research. This same argument pops up after every OS update. There are no exceptions -- every one of them has been blamed for all manner of post-update problem, linked to each of several different models, & everything else you have read on the Internet about this one. Users also frequently use the "clean install" argument in support of these theories that the update, whichever one it happens to be, is the only possible culprit.
The problem is these theories rarely prove to have any merit at all, & like with most such things, even when there is some merit to them, the complete explanation is more complicated. For instance, some users do a perfectly executed clean install & then ruin it by reintroducing the same bit of software that was the real problem in the first place. Some users don't know what a clean install is & mistakenly say they did one. Some eventually find & eliminate a different cause for their particular problems but never report that. Sometimes coincidence is involved -- with millions of users upgrading the chances that in some cases it is not are slim to none.
Basically, it is like anything else on the Internet. You can find something to support anything imaginable because people can imagine anything & too many of them ignore anything that doesn't support that or just don't make the effort to look for it in the first place.

Grey screen, wiped mac and still same problem

About 2 weeks ago my son accidentally pulled the power cable out of the back of the iMac. He then suffered quite a bit of freezing on several applications and even force quit was not working. He had to hold the power button in to turn off. He then had quite a bit freezing but force quit was working, albeit quite slowly. One day I could not login to my user account, my son had his open and the shared account we use for the iPad and I thought this might be causing my account to start logging in but just ending up back at the login screen. I logged out of the other two accounts and tried again and it worked. It was fine for a few hours but then I logged out and later my son tried to log in to be met with a grey screen and spinning cog. After looking on line we first tried safe boot which worked but then after restarting the same grey screen. It then seemed that we should insert the cd and try disk repair but this was greyed out so we could only verify disk and then the disc would not eject. I couldn't eject from the keyboard or from utilities but finally did it from starting up and clicking left side of mouse. After quite a few more start ups where we had grey screen followed by blue screen then nothing we then got it to start up. I quickly backed everything up using time machine and tried a repair disk again. This time it said the dusk could not be repaired so we prepared to wipe the iMac. I did this with relative ease until an error message showed the installation had failed. Back to the Internet for more help. Verbose mode threw up an error message of disk02 i/o error so we started again with doing a reinstall. It worked and seemed ok for a day or so, then freezing, spinning beach balls etc. I tried a verify permissions and about 50 needed repairing which it did. Worked fine and we started to copy our music and photos back (I don't actually know how to bring back everything but we were running out of space anyway so it seemed ok to just bring things back slowly). It seemed ok though start up was atrociously slow even with nothing on the system but it was working. Then Christmas day and my son has a new iPod which he wants to sync. It starts up fine, he syncs and then turns it off for Christmas lunch. He turns it back on and grey screen but this time nothing else, it can sit with spinning cog for over 10 mins. We've tried the power supply trick, draining the power and waiting but nothing. Is it the hard drive? And if so is it worth repairing or should we be thinking about a new iMac?

Update on my iMac, apple rang today to say they have replaced the hard drive too and let it run on and off since Saturday as the problem was intermittent and they had to make sure it did actually boot up properly. Anyway it seems the pulling of the cable from the back of the iMac caused a power surge which in turn caused problems on the hard drive, I have been saying this since day one but no one would listen! Apple are replacing the hard drive free of charge as they have caused us some inconvenience in not fixing it properly first time. That's what I call excellent customer service.
Quatchi, it sounds like there are similar issues on your hard drive to ours, apple said bad sectors and I'd guess you'll need to replace the hard drive.
Message was edited by: GG31568

I updated to Yosemite and now Iphoto says it's incompatable. Downloaded the new version 3 times now and still get the same message. Restarted Macbook twice and still same problem

I updated my Macbook Pro to Yosemite this morning, (it took almost 2 hours!), and now iPhoto tells me it's incompatable with Yosemite and I need to download the latest version. I've done that 3 times now and restarted twice, (just in case) and I still get the same message, incompatable...download the latest version of iPhoto.
Frustrating as ****!

The "latest" version is a bit ambiguous. The App Store may be only showing you the latest version you bought, not the most recent version.
Which version did you download?
You need to install iPhoto 9.6 and launch this version. If you previously have been running a version of iPhoto 8.x.x., you cannot update, but need to buy the upgrade to iPhoto 9.6 from the "Featured" tab of the App Store..
Then launch iPhoto from the Applications folder. The Dock icon may still be tied to the older version.
Also, depending on the version you upgraded from, you may need to run the iPhoto Library Upgrader, if your iPhoto Library has been created by iPhoto 7.1.2 or earlier, see this link: iPhoto '11: About the Library Upgrader

I cannot launch i tunes anymore under my login in on pc however other users can. the error message is i tunes library extras.itdb is locked. i uninstalled and reinstalled and still same problem

I cannot launch i tunes on my pc however others can on same pc under their own login. i uninstalled and reinstalled but erro message is still there - it reads the itunes library extras.itdb file is locked, on a locked disk or you do not have permission for this file.

Hello daglez,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Have a nice day,
Mario

I cannot send MMS from an iphone 5 - some people it works others do not receive it. MMS is turned on and i have tried to reset phone etc - still same problem.

I cannot send MMS from an iphone 5 - some people it works others do not receive it. MMS is turned on and i have tried to reset phone etc - still same problem.

Are the messages successfully sent?
If so, what happens to a message after it is successfully sent has nothing to do with the cell phone that sent the message.

HT1338 I am trying to register my Appliances and when I try to click on "Save" or "Submit" I am unable on my MacBook pro. I have tried different browsers yet still same problem. Can anyone shed some light on this please.

I am trying to register my Appliances and when I try to click on "Save" or "Submit" I am unable on my MacBook pro. I have tried different browsers yet still same problem. Can anyone shed some light on this please.

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

My iMac boots up and the mouse curser will move but nothing responds to the click. I was in the Apple store today and they reset the permissions, but still same problem. Help!!!

My iMac boots up fine and the mouse appears to be working fine however nothing responds to the mouse click. I took it to the Apple store today and they checked and repaired the permissions. I brought it home and still have the same problem. Does anyone have any ideas?

Hi, thanks for trying to help!
I just blew out the dust and turned it on again to the same problem.
So I tried holding the shift key which did something but then on reboot I got the same problem but this time worse, see here...
So I tried the alt key but that just gave me two startup disk options, both of which didn't work (they led to the same problem).
Then I tried CMD+s and followed your instructions, see below...
I just held the power button down and turned it on again and the same problem happened again.
Any further thoughts?
Thanks!
Alex

Hi! I use MBP mid 2010. as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?

Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?

Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?

My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

Wrong forum. This is the iPad forum.

Iphone cannot be used because the requires software is not installed - removed itunes 10.5 and re installed still same problem

iphone cannot be used because the requires software is not installed - re installed itunes still same problem

Is Apple Mobile Device Support currently appearing in the Uninstall a program control panel on the PC, vyvsdad?

My iphone 4 will no longer connect to my Itunes since 7.1.1 update itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected

my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
any Ideas cheers

Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

My USB CF Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore. It was last week and worked fine to get pictures from my camera. Now it won't mount. I have tried another card reader and the same problem exists. Also tried different cards..

Hi
My USB CF (Compact Flash) Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore.
Last week it worked fine to get pictures from my camera but now it won't mount at all.
I ejected it in the correct way rather than just disconnecting it but now i cannot get it to remount!
I cannot even see it in the disk utility or system profiler.
I have tried another card reader (a brand new one bought today) and the same problem exists. I've also tried different cards to see if that made a difference and they still arent being picked up on the Mac.
I have done all the usual things like rebooting, unplugging all other USB devices and then trying but nothing has worked.
I'm a photographer and I'm at my wits end here. I know the cards are fine as i have been using them without issue and they are also new.
Note: If I plug the camera in directly to the Mac, the Mac picks it up just fine as it always has done. Its just the card readers that it wont pick up anymore.
If anyone has any ideas at all other than the following (my so called friends advice) you'd earn my undting love:
Buy a PC
Use the camera (Thats why i bought the reader in the first place - importing RAW files from the camera is SLOW!)
Replace your CF cards (I have three 8GB cards two of which i had never used til today and they dont work either!)
Buy a new card reader (this is the 5th one in two days - none work on the Mac)
Many thanks in advance!
LIsa

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

RMA and still same problems! (Neo2 Plat)

Similar Messages

Maybe you are looking for