RMAN-00600 Error during Duplicate
RDBMS Version: 8.1.6
Operating System and Version: NT 4.0
Error Number (if applicable): RMAN-00600
Product: Recovery Manager
Product Version: 8.1.6
RMAN Duplicate Database Error (RMAN-00600)
While running the following command:
run {
allocate auxiliary channel ch1 type disk;
allocate auxiliary channel ch2 type disk;
duplicate target database to db1backup nofilenamecheck;
I get the following errors:
RMAN-03022: compiling command: Duplicate Db
RMAN-00571: =========================================================
RMAN-00569: ================ ERROR MESSAGE STACK FOLLOWS ============
RMAN-00571: =========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03012: fatal error during compilation of command
RMAN-03028: fatal error code: 600
RMAN-03013: command type: Duplicate Db
RMAN-00600: internal error, arguments [14036] [-11] [29] [
CHARACTER SET %s
] [WE8ISO8859P1]
Any ideas as to what may be causing this? I have successfully backed up the target database, the connections to the target and auxiliary databases are fine, and I'm using a controlfile vs. a catalog.
Mike McAndrew
[email protected]
null
Hi
Duplicate databases with RMAN is not as simple as it seems, look at message colled "Duplicate database error with RMAN"
This maybe could help you.
Anyway, I saw the message:
"internal error, arguments [14036] [-11] [29] [CHARACTER SET %s] [WE8ISO8859P1] "
What NLS configuration have you?
A10!
null
Similar Messages
-
Error during "duplicate target ... from active database"
hi:
RMAN duplicate failure after the auxiliary instance mounted,we want to create a physical standby database .
Platform: solaris10 spark 64bit
Version: 11.2.0.1.5 (both primary and standby)
thank you..
RMAN log:
rman target sys/password@his_primary auxiliary sys/password@his_standby_tt
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Aug 30 15:40:06 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: HIS (DBID=3271178181)
connected to auxiliary database: HIS (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 30-AUG-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=2833 device type=DISK
allocated channel: ORA_AUX_DISK_2
channel ORA_AUX_DISK_2: SID=3399 device type=DISK
allocated channel: ORA_AUX_DISK_3
channel ORA_AUX_DISK_3: SID=3966 device type=DISK
allocated channel: ORA_AUX_DISK_4
channel ORA_AUX_DISK_4: SID=3 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/oracle/product/11.2.0/db_1/dbs/orapwhis' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/orapwhis' ;
executing Memory Script
Starting backup at 30-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1570 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=1708 device type=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: SID=1851 device type=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: SID=1995 device type=DISK
Finished backup at 30-AUG-12
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/app/oradata/his/control01.ctl';
restore clone controlfile to '/u01/app/oradata/his/control02.ctl' from
'/u01/app/oradata/his/control01.ctl';
restore clone controlfile to '/u01/app/oradata/his/control03.ctl' from
'/u01/app/oradata/his/control01.ctl';
executing Memory Script
Starting backup at 30-AUG-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
channel ORA_DISK_1: starting datafile copy
copying standby control file
output file name=/export/home/oracle/snap.f tag=TAG20120830T154059 RECID=9 STAMP=792690060
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 30-AUG-12
Starting restore at 30-AUG-12
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_1: copied control file copy
Finished restore at 30-AUG-12
Starting restore at 30-AUG-12
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_1: copied control file copy
Finished restore at 30-AUG-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/u01/app/oradata/his/temp.266.750421813";
set newname for tempfile 2 to
"/u01/app/oradata/his/ts_temp_patrol.298.750425277";
set newname for tempfile 3 to
"/u01/app/oradata/his/ts_his_temp.296.750427905";
set newname for tempfile 4 to
"/u01/app/oradata/his/ts_tjjk_temp.282.750427917";
set newname for tempfile 5 to
"/u01/app/oradata/his/ts_temp_shuhao.595.782919539";
switch clone tempfile all;
set newname for datafile 1 to
"/u01/app/oradata/his/system.256.750421615";
set newname for datafile 2 to
"/u01/app/oradata/his/sysaux.257.750421615";
set newname for datafile 3 to
"/u01/app/oradata/his/undotbs1.258.750421615";
set newname for datafile 4 to
"/u01/app/oradata/his/users.259.750421615";
set newname for datafile 5 to
"/u01/app/oradata/his/ts_his.280.750425023";
set newname for datafile 6 to
"/u01/app/oradata/his/ts_his_index.281.750425025";
set newname for datafile 7 to
"/u01/app/oradata/his/system.569.754307341";
set newname for datafile 8 to
"/u01/app/oradata/his/ts_bj.283.750425027";
set newname for datafile 9 to
"/u01/app/oradata/his/ts_gt.284.750425027";
set newname for datafile 10 to
"/u01/app/oradata/his/ts_fx.285.750425027";
set newname for datafile 11 to
"/u01/app/oradata/his/ts_uap.286.750425029";
set newname for datafile 12 to
"/u01/app/oradata/his/ts_gkxj.287.750425029";
set newname for datafile 13 to
"/u01/app/oradata/his/ts_xejj.288.750425031";
set newname for datafile 14 to
"/u01/app/oradata/his/ts_zdzyrz.289.750425031";
set newname for datafile 15 to
"/u01/app/oradata/his/ts_zj.290.750425033";
set newname for datafile 16 to
"/u01/app/oradata/his/ts_jgcp.291.750425033";
set newname for datafile 17 to
"/u01/app/oradata/his/ts_gtbj.292.750425033";
set newname for datafile 18 to
"/u01/app/oradata/his/ts_base.293.750425035";
set newname for datafile 19 to
"/u01/app/oradata/his/ts_exdata.294.750425035";
set newname for datafile 20 to
"/u01/app/oradata/his/ts_tjjk.295.750425037";
set newname for datafile 21 to
"/u01/app/oradata/his/ts_shuhao.594.782919537";
set newname for datafile 22 to
"/u01/app/oradata/his/ts_patrol.297.750425037";
backup as copy reuse
datafile 1 auxiliary format
"/u01/app/oradata/his/system.256.750421615" datafile
2 auxiliary format
"/u01/app/oradata/his/sysaux.257.750421615" datafile
3 auxiliary format
"/u01/app/oradata/his/undotbs1.258.750421615" datafile
4 auxiliary format
"/u01/app/oradata/his/users.259.750421615" datafile
5 auxiliary format
"/u01/app/oradata/his/ts_his.280.750425023" datafile
6 auxiliary format
"/u01/app/oradata/his/ts_his_index.281.750425025" datafile
7 auxiliary format
"/u01/app/oradata/his/system.569.754307341" datafile
8 auxiliary format
"/u01/app/oradata/his/ts_bj.283.750425027" datafile
9 auxiliary format
"/u01/app/oradata/his/ts_gt.284.750425027" datafile
10 auxiliary format
"/u01/app/oradata/his/ts_fx.285.750425027" datafile
11 auxiliary format
"/u01/app/oradata/his/ts_uap.286.750425029" datafile
12 auxiliary format
"/u01/app/oradata/his/ts_gkxj.287.750425029" datafile
13 auxiliary format
"/u01/app/oradata/his/ts_xejj.288.750425031" datafile
14 auxiliary format
"/u01/app/oradata/his/ts_zdzyrz.289.750425031" datafile
15 auxiliary format
"/u01/app/oradata/his/ts_zj.290.750425033" datafile
16 auxiliary format
"/u01/app/oradata/his/ts_jgcp.291.750425033" datafile
17 auxiliary format
"/u01/app/oradata/his/ts_gtbj.292.750425033" datafile
18 auxiliary format
"/u01/app/oradata/his/ts_base.293.750425035" datafile
19 auxiliary format
"/u01/app/oradata/his/ts_exdata.294.750425035" datafile
20 auxiliary format
"/u01/app/oradata/his/ts_tjjk.295.750425037" datafile
21 auxiliary format
"/u01/app/oradata/his/ts_shuhao.594.782919537" datafile
22 auxiliary format
"/u01/app/oradata/his/ts_patrol.297.750425037" ;
sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /u01/app/oradata/his/temp.266.750421813 in control file
renamed tempfile 2 to /u01/app/oradata/his/ts_temp_patrol.298.750425277 in control file
renamed tempfile 3 to /u01/app/oradata/his/ts_his_temp.296.750427905 in control file
renamed tempfile 4 to /u01/app/oradata/his/ts_tjjk_temp.282.750427917 in control file
renamed tempfile 5 to /u01/app/oradata/his/ts_temp_shuhao.595.782919539 in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 30-AUG-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
channel ORA_DISK_1: starting datafile copy
input datafile file number=00008 name=+DATA/his/datafile/ts_bj.283.750425027
channel ORA_DISK_2: starting datafile copy
input datafile file number=00009 name=+DATA/his/datafile/ts_gt.284.750425027
channel ORA_DISK_3: starting datafile copy
input datafile file number=00005 name=+DATA/his/datafile/ts_his.280.750425023
channel ORA_DISK_4: starting datafile copy
input datafile file number=00015 name=+DATA/his/datafile/ts_zj.290.750425033
RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_3 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_4 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_1 disabled, job failed on it will be run on another channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/30/2012 17:49:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN>
Primary database alert log:
Thu Aug 30 15:41:00 2012
Clearing standby activation ID 3277937203 (0xc3615a33)
The primary database controlfile was created using the
'MAXLOGFILES 16' clause.
There is space for up to 11 standby redo logfiles
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl5.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl6.f' SIZE 536870912;
WARNING: OMF is enabled on this database. Creating a physical
standby controlfile, when OMF is enabled on the primary
database, requires manual RMAN intervention to resolve OMF
datafile pathnames.
NOTE: Please refer to the RMAN documentation for procedures
describing how to manually resolve OMF datafile pathnames.
Thu Aug 30 16:10:13 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25860.trc (incident=72361):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72361/his_ora_25860_i72361.trc
Thu Aug 30 16:10:20 2012
Trace dumping is performing id=[cdmp_20120830161020]
Thu Aug 30 16:10:22 2012
Sweep [inc][72361]: completed
Sweep [inc2][72361]: completed
Thu Aug 30 16:40:32 2012
Thread 1 cannot allocate new log, sequence 3031
Private strand flush not complete
Current log# 4 seq# 3030 mem# 0: +DATA/his_primary/onlinelog/group_4.579.759345057
Current log# 4 seq# 3030 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_4_74nf15rq_.log
Thread 1 advanced to log sequence 3031 (LGWR switch)
Current log# 5 seq# 3031 mem# 0: +DATA/his_primary/onlinelog/group_5.261.759345075
Current log# 5 seq# 3031 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_5_74nf1q2g_.log
Thu Aug 30 16:40:37 2012
LNS: Standby redo logfile selected for thread 1 sequence 3031 for destination LOG_ARCHIVE_DEST_2
Thu Aug 30 16:40:39 2012
Archived Log entry 5829 added for thread 1 sequence 3030 ID 0xffffffffc3615a33 dest 1:
Thu Aug 30 16:42:15 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25862.trc (incident=72369):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72369/his_ora_25862_i72369.trc
Thu Aug 30 16:42:17 2012
Trace dumping is performing id=[cdmp_20120830164217]
Thu Aug 30 16:42:17 2012
Sweep [inc][72369]: completed
Sweep [inc2][72369]: completed
Thu Aug 30 16:51:53 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25858.trc (incident=72353):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72353/his_ora_25858_i72353.trc
Thu Aug 30 16:51:55 2012
Sweep [inc][72353]: completed
Sweep [inc2][72353]: completed
Thu Aug 30 16:51:55 2012
Trace dumping is performing id=[cdmp_20120830165155]
Edited by: 960892 on 2012-9-24 上午2:22hi:
this is the initialization parameter file for auxiliary instance:
*.audit_file_dest='/u01/oracle/admin/his/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oradata/his/control01.ctl','/u01/app/oradata/his/control02.ctl','/u01/app/oradata/his/control03.ctl'
*.db_block_size=8192
*.db_domain='abc.com.cn'
*.db_file_name_convert='+DATA/his/datafile/','/u01/app/oradata/his/','+DATA/his/tempfile/','/u01/app/oradata/his/','+DATA/his_primary/datafile/','/u01/app/oradata/his/','+DATA/his_primary/tempfile/','/u01/app/oradata/his/'
*.db_files=1000
*.db_name='his'
*.db_recovery_file_dest='/backup/oracle'
*.db_recovery_file_dest_size=1073741824000
*.db_unique_name='his_standby_tt'
*.diagnostic_dest='/u01/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=hisXDB)'
*.fal_client='his_standby_tt'
*.fal_server='his_primary'
*.log_archive_config='DG_CONFIG=(his_primary,his_standby_tt)'
*.log_archive_dest_1='LOCATION=/backup/oracle/HIS_STANDBY_TT/archivelog VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=his_standby_tt'
*.log_archive_dest_2='SERVICE=his_primary LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=his_primary'
*.log_archive_dest_state_1='enable'
*.log_archive_dest_state_2='enable'
*.log_file_name_convert='+DATA/his_primary/onlinelog/','/u01/app/oradata/his/','/backup/odsdb/HIS_PRIMARY/onlinelog/','/u01/app/oradata/his/'
*.memory_target=2181038080
*.nls_language='SIMPLIFIED CHINESE'
*.nls_territory='CHINA'
*.open_cursors=300
*.processes=3000
*.remote_login_passwordfile='EXCLUSIVE'
*.service_names='his.abc.com.cn,his_standby_tt.abc.com.cn'
*.sessions=3305
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.event='10298 trace name context forever, level 32' -
Hi all,
I'm working with a 10.2.0.4 Oracle Enterprise version. I'm trying to make a duplicate of my database from production to our new pre server. I'm having problems. We're not working with RMAN catalog.
When I try to duplicate the database using our diary full backup from pro, appears this error for all datafiles:
RMAN-06023: no backup or copy of datafile 1 found to restore
If I make a crosscheck backup on pro, all full backups are availables. The destiny instance is started as "no mount".
This is the rman block I use to do the duplicate (I'm doing it from pro server):
RMAN> CONNECT AUXILIARY sys/xxxxxx@PREDB
connected to auxiliary database: PREDB(not mounted)
RMAN> run{
2> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
3> DUPLICATE TARGET DATABASE TO SSINTTST
4> DB_FILE_NAME_CONVERT=('/oracle/oradata/DB','/oracle/oradata/u02/PREDB')
5> LOGFILE
6> GROUP 1 ('/oracle/oradata/u02/PREDB/redo01.log') SIZE 100M,
7> GROUP 2 ('/oracle/oradata/u02/PREDB/redo02.log') SIZE 100M,
8> GROUP 3 ('/oracle/oradata/u02/PREDB/redo03.log') SIZE 100M REUSE;
9> }
And the full result of it is:
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=159 devtype=DISK
Starting Duplicate Db at 26-SEP-11
contents of Memory Script:
set until scn 13359029805;
set newname for datafile 1 to
"/oracle/oradata/u02/PREDB/system01.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
Starting restore at 26-SEP-11
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /oracle/oradata/u02/PREDB/system01.dbf (for each datafile)
channel aux1: reading from backup piece /oracle/backup/DB/backup_DB_20110926_2vmnhi1u_s7263_p1
ORA-19870: error reading backup piece /oracle/backup/DB/backup_DB_20110926_2vmnhi1u_s7263_p1
ORA-19505: failed to identify file "/oracle/backup/DB/backup_DB_20110926_2vmnhi1u_s7263_p1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
released channel: aux1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/26/2011 18:52:15
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore (for each datafile)
Any suggestions??
Regards,
dbajugLinux Error: 2: No such file or directoryCross-Check the crossponding directory structure that you have created and also the permission on the directory as specified in rman clock .
--neeraj -
Error during duplicate database.
Hi All,
db - 9.2.0.8.0
OS - Win 2003 server
I was rying to duplicate db on the same server. Please go through the following massage.
printing stored script: Memory Script
set until scn 14420521;
recover
clone database
delete archivelog
executing script: Memory Script
Note, at this point my database was apperead to hang for long time. it was around 2 hour and then revert back with the following
executing command: SET until clause
Starting recover at 18-SEP-08
starting media recovery
archive log thread 1 sequence 7 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_7.ARC
archive log thread 1 sequence 8 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_8.ARC
archive log thread 1 sequence 9 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_9.ARC
archive log thread 1 sequence 10 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_10.ARC
archive log thread 1 sequence 11 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_11.ARC
archive log thread 1 sequence 12 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_12.ARC
archive log filename=D:\BCKUP\ARCHIVE\ARCH_7.ARC thread=1 sequence=7
archive log filename=D:\BCKUP\ARCHIVE\ARCH_8.ARC thread=1 sequence=8
archive log filename=D:\BCKUP\ARCHIVE\ARCH_9.ARC thread=1 sequence=9
archive log filename=D:\BCKUP\ARCHIVE\ARCH_10.ARC thread=1 sequence=10
archive log filename=D:\BCKUP\ARCHIVE\ARCH_11.ARC thread=1 sequence=11
archive log filename=D:\BCKUP\ARCHIVE\ARCH_12.ARC thread=1 sequence=12
media recovery complete
Finished recover at 18-SEP-08
printing stored script: Memory Script
shutdown clone;
startup clone nomount ;
executing script: Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/18/2008 20:11:45
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested cancel of current operation
hare krishna
AlokAlok do you have user that still active at auxiliary instance ,exit from that auxilairy session after doing database in nomount and then retry the duplicate process.
Khurram -
RMAN throwing errors during Tablespace Backup - RMAN-06004 and RMAN-06019
Hi All.
Please help me to fix trail of error message I'm getting while trying backup of a newly added tablespace in database. I'm using RMAN as a recovery method.
Tablespace Name: test
DB Version: Oracle 10g R1.
OS: Red Hat Linux 5
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1 490 SYSTEM YES /u01/app/oracle/oradata/qrcl/system01.dbf
2 25 UNDOTBS1 YES /u01/app/oracle/oradata/qrcl/undotbs01.dbf
3 270 SYSAUX NO /u01/app/oracle/oradata/qrcl/sysaux01.dbf
4 23 USERS NO /u01/app/oracle/oradata/qrcl/users01.dbf
5 40 TEST NO /u01/app/test01.dbf
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1 20 TEMP 32767 /u01/app/oracle/oradata/qrcl/temp01.dbf
RMAN>
RMAN> backup tablespace "test";
Starting backup at 22-AUG-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/22/2012 11:57:13
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20202: tablespace not found in the recovery catalog
RMAN-06019: could not translate tablespace name "test"
RMAN> restore tablespace test;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "test": expecting one of: "double-quoted-string, identifier, single-quoted-string"
RMAN-01007: at line 1 column 20 file: standard input
I tried to update Catalog Server but still no luck:
RMAN> RESYNC CATALOG;
starting full resync of recovery catalog
full resync complete
Please Assist.
Thanks
Prashant DixitHello Prashant;
The main issue is your tablespace name is an RMAN Reserved Word "Test"
http://docs.oracle.com/cd/B13789_01/server.101/b10770/rcmcomma.htm#1006728
Different test
-- Create the tablespace
CREATE TABLESPACE OTN_TEST DATAFILE
'/u01/oradata/RECOVER2/test01.dbf' SIZE 1M AUTOEXTEND OFF
LOGGING
ONLINE;-- Create a user for the tablespace
CREATE USER RMAN_TEST
IDENTIFIED BY RMAN_TEST
DEFAULT TABLESPACE OTN_TEST
TEMPORARY TABLESPACE TEMP
PROFILE DEFAULT
ACCOUNT UNLOCK;
ALTER USER RMAN_TEST QUOTA UNLIMITED ON "OTN_TEST"; -- Create a table in the tablespace
CREATE TABLE RMAN_TEST.EMP
EMPNO NUMBER,
ENAME VARCHAR2(30 BYTE),
JOB VARCHAR2(30 BYTE),
MGR NUMBER,
HIREDATE DATE,
SAL NUMBER,
COMM NUMBER,
DEPTNO NUMBER
TABLESPACE OTN_TEST;-- Add some data
SET DEFINE OFF;
Insert into RMAN_TEST.EMP
(EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO)
Values
(7369, 'SMITH', 'CLERK', 7902, TO_DATE('12/17/1980 00:00:00', 'MM/DD/YYYY HH24:MI:SS'),
800, 20, 0);
Insert into RMAN_TEST.EMP
(EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO)
Values
(5000, 'NOCATALOG', 'DBA', 77902, TO_DATE('04/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'),
200, 0, 0);
COMMIT;-- start RMAN and backup tablespace
RMAN> BACKUP TABLESPACE OTN_TEST;
Starting backup at 22-AUG-12
starting full resync of recovery catalog
full resync complete
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00007 name=/u01/oradata/RECOVER2/test01.dbf
channel ORA_DISK_1: starting piece 1 at 22-AUG-12
channel ORA_DISK_1: finished piece 1 at 22-AUG-12
piece handle=/u01/app/oracle/flash_recovery_area/RECOVER2/backupset/2012_08_22/o1_mf_nnndf_TAG20120822T080711_839pczng_.bkp tag=TAG20120822T080711 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 22-AUG-12
Starting Control File and SPFILE Autobackup at 22-AUG-12
piece handle=/u01/app/oracle/flash_recovery_area/RECOVER2/autobackup/2012_08_22/o1_mf_s_791971633_839pd1bm_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 22-AUG-12
Note
If you dropped the tablespace then you need to recover the database to a point in time, not the tablespace.
Best Regards
mseberg -
RMAN Backup error with Symantec Backup Tool
Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks
Edited by: 873393 on Apr 17, 2012 10:09 AMHello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin -
Question:rman recover (error:Bad header found during inspecting archived )
oracle9208 aix5.2
after restore database successfully,i recover database
i receive info in alert_sid.log
Corrupt block seq: 0 blocknum=1.
Bad header found during inspecting archived log
Data in bad block - seq:184680448. bno:369098753. time:0
beg:0 cks:260
calculated check value: 2653
Reread of seq=0, blocknum=1, file=/dev/rora_redo1_21, found same corrupt data
alter database recover datafile list
161 , 162 , 163 , 164 , 165 , 166 , 167 , 168
Completed: alter database recover datafile list
161 , 162 ,
Fri Nov 6 22:37:17 2009
alter database recover if needed
start until time 'NOV 01 2009 21:07:53' using backup controlfile
Media Recovery Start
ORA-279 signalled during: alter database recover if needed
start until time...
then recover processes hang for a long time
so why and how can i solve this problem??Dear user097815,
I think there are a couple of syntax errors and it would be better for you to first try each one one-by-one than add them into your "run" block.
RMAN> allocate channel for maintenance device type 'SBT_TAPE';
using target database control file instead of recovery catalog
allocated channel: ORA_MAINT_SBT_TAPE_1
channel ORA_MAINT_SBT_TAPE_1: sid=910 devtype=SBT_TAPE
channel ORA_MAINT_SBT_TAPE_1: Data Protector A.06.10/611
RMAN> allocate auxiliary channel t1 type 'sbt_tape';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "auxiliary": expecting one of: "channel"
RMAN-01007: at line 1 column 10 file: standard input
RMAN> ALLOCATE AUXILIARY CHANNEL c1 DEVICE TYPE sbt;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "auxiliary": expecting one of: "channel"
RMAN-01007: at line 1 column 10 file: standard input
RMAN> run
ALLOCATE AUXILIARY CHANNEL c1 DEVICE TYPE sbt;
}Hope That Helps.
Ogan -
1 duplicate key error during insert into table
Dear Guru's
While upgrading the SAP_HR patch, I am facing this issue
Current level is SAPKE60455
Trying to apply patch - SAPKE60456
This is seen in the import log
Start import R3TRVDATV_512W_O ...
client 000: 1
client 001: 1
client 070: 1
client 080: 1
client 100: 1
client 320: 1
1 duplicate key error during insert into table T512T occured
End import R3TRVDATV_512W_O (with warnings)
Please help, thank in advance
R3trans is at version 6.19
Regards,
OmkarHello,
Issue was resolved after upgrading the R3trans
Regards,
Omkar -
RMAN-00600: internal error, arguments [8201]
Hi,
on 10g R2 on a win 2003 server we had follwing error for RMAN backup :
RMAN-00600: internal error, arguments [8201] [] [] [] []we looked at metalink note : 412786.1
that says :
There is mismatch between the information stored in the Controlfile and rman Catalogand did RMAN> resync catalog; that did not resolve the problem.
We created another RMAN schema which means a new catalog. Then it is difficult to believe
that the new catalog was not syncronized with control file. But again exactly the same error :
RMAN-00600: internal error, arguments [8201] [] [] [] []
Why again the same error with a new catalog ?
Thanks.Thank you Werner. I read the discussion. How about this work arround in Bug No. 5916459 :
Workaround ========== . Modify ?/admin/recover.bsq as follows and upgrade recovery catalog schema .
using UPGRADE CATALOG command.
FROM
SELECT nvl(oldest_flashback_time, MAXDATEVAL) INTO fbUntiltime FROM fb
WHERE dbinc_key = this_dbinc_key; .
TO .
SELECT nvl(oldest_flashback_time, MAXDATEVAL) INTO fbUntiltime FROM fb
WHERE dbinc_key = this_dbinc_key AND db_unique_name = this_db_unique_name; . I need some details to apply it. -
RMAN-00600: internal error
Hi every-one!
Now I have Oracle RAC 10.2.0.4 on AIX p595.
Normally, about 2 years, I backup by RMAN;
BACKUP DATABASE;
but from Yesterday, when using BACKUP DATABASE, it causes error as bellow:
RMAN> backup database;
Starting backup at 2011-04-11 10:02:59
using target database control file instead of recovery catalog
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: sid=9782 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_2
channel ORA_SBT_TAPE_2: sid=10436 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_2: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_3
channel ORA_SBT_TAPE_3: sid=9502 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_3: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_4
channel ORA_SBT_TAPE_4: sid=9489 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_4: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_5
channel ORA_SBT_TAPE_5: sid=9912 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_5: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_6
channel ORA_SBT_TAPE_6: sid=9396 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_6: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_7
channel ORA_SBT_TAPE_7: sid=9120 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_7: Data Protection for Oracle: version 5.4.1.0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 04/11/2011 10:03:29
RMAN-00600: internal error, arguments [13205] [] [] [] []
RMAN>
But when I try to backup
BACKUP TABLESPACE USERS;
Iit is OK.
Pls help me!Hi,
Probably you have hit Bug 6325947.
You could try to limit your files per set or your piece size.
Regards,
Tycho -
Rman duplication fails with RMAN-00600
Hi All,
I'm trying to perform a database duplication from a prod server to a non prod one with ORacle 11gR2.
I'm performing a backup-based duplication without target connection from DEV3 database to DEV1 database. I followed the steps mentionned in the "backup & Recovery Guide" http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmdupdb.htm
Here are the steps I followed:
1. I configured my spfile of the auxiliary database like the target one. I also added these lines to change the location of the restores:
SQL> alter system set log_file_name_convert='/u04/DEV3/rdo','/u04/DEV1/rdo','/u03/DEV3/rdo','/u03/DE V1/rdo','/u02/DEV3/rdo','/u02/DEV1/rdo' scope=spfile;
SQL> alter system set db_file_name_convert='/u04/DEV3/rdo','/u04/DEV1/rdo','/u03/DEV3/rdo','/u03/DEV1/rdo','/u02/DEV3/rdo','/u02/DEV1/rdo','/u02/DEV3/dbf/DEV3','/u02/DEV1/dbf/DEV1' scope=spfile;
2. I then shutdown the database, and start it in nomount mode.
3. I connect to the auxiliary database, and the recovery catalog
4. I run the following rman duplication command:
RUN{
DUPLICATE DATABASE DEV3 to DEV1;
The restore succeeds but at the end, the recovery ends with the following error:
channel ORA_AUX_DISK_6: reading from backup piece /RMAN/DEV3/DEV3_0_14:27:01-05-31-2011_2_138.rman
channel ORA_AUX_DISK_4: piece handle=/RMAN/DEV3/DEV3_0_14:27:01-05-31-2011_2_136.rman tag=LVL0_DB_BKP
channel ORA_AUX_DISK_4: restored backup piece 2
channel ORA_AUX_DISK_4: restore complete, elapsed time: 02:24:10
channel ORA_AUX_DISK_6: piece handle=/RMAN/DEV3/DEV3_0_14:27:01-05-31-2011_2_138.rman tag=LVL0_DB_BKP
channel ORA_AUX_DISK_6: restored backup piece 2
channel ORA_AUX_DISK_6: restore complete, elapsed time: 02:25:09
Finished restore at 06/06/11 15:22:58
contents of Memory Script:
catalog clone datafilecopy "/u02/DEV1/dbf/DEV1/undotbs01.dbf";
switch clone datafile 3 to datafilecopy
"/u02/DEV1/dbf/DEV1/undotbs01.dbf";
switch clone datafile all;
executing Memory Script
cataloged datafile copy
datafile copy file name=/u02/DEV1/dbf/DEV1/undotbs01.dbf RECID=70 STAMP=753117778
datafile 3 switched to datafile copy
input datafile copy RECID=70 STAMP=753117778 file name=/u02/DEV1/dbf/DEV1/undotbs01.dbf
datafile 1 switched to datafile copy
input datafile copy RECID=71 STAMP=753117780 file name=/u02/DEV1/dbf/DEV1/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=72 STAMP=753117780 file name=/u02/DEV1/dbf/DEV1/sysaux01.dbf
contents of Memory Script:
set until scn 7241504550365;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 06/06/11 15:23:15
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
using channel ORA_AUX_DISK_5
using channel ORA_AUX_DISK_6
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03012: fatal error during compilation of command
RMAN-03028: fatal error code for command recover : 600
RMAN-00600: internal error, arguments [8029] [1] [] [] []
Can someone please help me resolve this issue???it's quite urgent.
Thank you,
FarahI am facing same error, did any of you find a resolution yet?
contents of Memory Script:
set until scn 7243533883622;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 10/12/11 19:33:12
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03012: fatal error during compilation of command
RMAN-03028: fatal error code for command recover : 600
RMAN-00600: internal error, arguments [8029] [1] [] [] []
Wed Oct 12 19:33:14 CEST 2011 Remove the lock file
ERROR: RMAN FAILUR
I see many kblockd processes, can this be an indication:
applprod@gvaebsdb3:~ $ ps -ef|grep kblockd
root 231 211 0 Oct05 ? 00:00:00 [kblockd/0]
root 232 211 0 Oct05 ? 00:00:00 [kblockd/1]
root 233 211 0 Oct05 ? 00:00:00 [kblockd/2]
root 234 211 0 Oct05 ? 00:00:00 [kblockd/3]
root 235 211 0 Oct05 ? 00:00:00 [kblockd/4]
root 236 211 0 Oct05 ? 00:00:00 [kblockd/5]
root 237 211 0 Oct05 ? 00:00:00 [kblockd/6]
root 238 211 0 Oct05 ? 00:00:00 [kblockd/7]
root 239 211 0 Oct05 ? 00:00:00 [kblockd/8]
root 240 211 0 Oct05 ? 00:00:00 [kblockd/9]
root 241 211 0 Oct05 ? 00:00:00 [kblockd/10]
root 242 211 0 Oct05 ? 00:00:00 [kblockd/11]
root 243 211 0 Oct05 ? 00:00:00 [kblockd/12]
root 244 211 0 Oct05 ? 00:00:00 [kblockd/13]
root 245 211 0 Oct05 ? 00:00:00 [kblockd/14]
root 246 211 0 Oct05 ? 00:00:00 [kblockd/15]
Thanks,
Horia -
[INFORMATIVE] RMAN-00600 8029
In case anybody encounters such an error when restoring with RMAN, from backup to ASM:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03012: fatal error during compilation of command
RMAN-03028: fatal error code for command restore : 600
RMAN-00600: internal error, arguments [8029] [2] [] [] []It happened to me when I had to cancel a DUPLICATE command because of tape issues.
In order to "resume" the recovery, you must manually use "set newname for datafile xx to yy;"
xx : former file name (or number)
yy : new file name (here including ASM reference)
e.g. :
run {
allocate auxiliary channel ch1 type 'SBT_TAPE' PARMS '...';
allocate auxiliary channel ch2 type 'SBT_TAPE' PARMS '...';
allocate auxiliary channel ch3 type 'SBT_TAPE' PARMS '...';
set newname for datafile 2 to '+DG/dat01.dbf';
set newname for datafile 4 to '+DG/dat07.dbf';
set newname for datafile 16 to '+DG/dat03.dbf';
set newname for datafile 71 to '+DG/dat13.dbf';
restore clone datafile 2,4,16,71;
}Printed here because there's no info about RMAN-00600 [8029] on MetaLink.
Yoann.Sorry this is a late response.
All ora-600 errors should be logged to Oracle Support.
Thanks Tammy -
Error during restore/recovery and 'open resetlogs'
Hello forum. I'm attempting to restore a database to a new host and have run into an error during the opening of the database (with resetlogs). The renaming of the datafiles, restore, switching of datafiles, and recovery are all done by an rman script, the contents of which are below:
# Restore production database to DR site using file system
# instead of ASM
run {
set newname for datafile 1 to '/opt/oracle/product/10gR2/oradata/DB01/system.dbf';
set newname for datafile 2 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf';
set newname for datafile 3 to '/opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf';
set newname for datafile 4 to '/opt/oracle/product/10gR2/oradata/DB01/users.dbf';
set newname for datafile 5 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf';
set newname for datafile 6 to '/opt/oracle/product/10gR2/oradata/DB01/file1.dbf';
set newname for datafile 7 to '/opt/oracle/product/10gR2/oradata/DB01/file2.dbf';
restore database;
switch datafile all;
recover database;
I get the following output:
RMAN> @/home/oracle/scripts/rman_dr.rman
RMAN> # Restore production database to DR site using file system
2> # instead of ASM
3> #
4> run {
5> set newname for datafile 1 to '/opt/oracle/product/10gR2/oradata/DB01/system.dbf';
6> set newname for datafile 2 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf';
7> set newname for datafile 3 to '/opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf';
8> set newname for datafile 4 to '/opt/oracle/product/10gR2/oradata/DB01/users.dbf';
9> set newname for datafile 5 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf';
10> set newname for datafile 6 to '/opt/oracle/product/10gR2/oradata/DB01/file1.dbf';
11> set newname for datafile 7 to '/opt/oracle/product/10gR2/oradata/DB01/file2.dbf';
12>
13> restore database;
14> switch datafile all;
15> recover database;
16> }
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 03-JAN-08
Starting implicit crosscheck backup at 03-JAN-08
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 651 objects
Finished implicit crosscheck backup at 03-JAN-08
Starting implicit crosscheck copy at 03-JAN-08
using channel ORA_DISK_1
Crosschecked 1 objects
Finished implicit crosscheck copy at 03-JAN-08
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /opt/oracle/product/10gR2/oradata/DB01/system.dbf
restoring datafile 00002 to /opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf
restoring datafile 00003 to /opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf
restoring datafile 00004 to /opt/oracle/product/10gR2/oradata/DB01/users.dbf
restoring datafile 00005 to /opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf
restoring datafile 00006 to /opt/oracle/product/10gR2/oradata/DB01/file1.dbf
restoring datafile 00007 to /opt/oracle/product/10gR2/oradata/DB01/file2.dbfchannel ORA_DISK_1: reading from backup piece /ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642899284.1.1.bus
channel ORA_DISK_1: restored backup piece 1
piece handle=/ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642899284.1.1.bus tag=20080101_LV0_DB
channel ORA_DISK_1: restore complete, elapsed time: 01:22:28
Finished restore at 03-JAN-08
datafile 1 switched to datafile copy
input datafile copy recid=14 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/system.dbf
datafile 2 switched to datafile copy
input datafile copy recid=15 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf
datafile 3 switched to datafile copy
input datafile copy recid=16 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf
datafile 4 switched to datafile copy
input datafile copy recid=17 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/users.dbf
datafile 5 switched to datafile copy
input datafile copy recid=18 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf
datafile 6 switched to datafile copy
input datafile copy recid=19 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/file1.dbf
datafile 7 switched to datafile copy
input datafile copy recid=20 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/file2.dbf
Starting recover at 03-JAN-08
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=2 sequence=1005
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=1365
channel ORA_DISK_1: reading from backup piece /ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642900444.1.1.bus
channel ORA_DISK_1: restored backup piece 1
piece handle=/ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642900444.1.1.bus tag=20080101_LV0_DB
channel ORA_DISK_1: restore complete, elapsed time: 00:00:05
archive log filename=/opt/oracle/product/10gR2/db/flash_recovery_area/DB01/archivelog/2008_01_03/o1_mf_1_1365_3qtshnfv_.arc thread=1 sequence=1365
archive log filename=/opt/oracle/product/10gR2/db/flash_recovery_area/DB01/archivelog/2008_01_03/o1_mf_2_1005_3qtshncz_.arc thread=2 sequence=1005
channel default: deleting archive log(s)
archive log filename=/opt/oracle/product/10gR2/db/flash_recovery_area/DB01/archivelog/2008_01_03/o1_mf_1_1365_3qtshnfv_.arc recid=2418 stamp=643049236
unable to find archive log
archive log thread=1 sequence=1366
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/03/2008 16:47:22
RMAN-06054: media recovery requesting unknown log: thread 1 seq 1366 lowscn 181804603
RMAN> **end-of-file**
I searched for a decription of the 06054 error, and found that if the archive logs weren't available, then to run "alter database open resetlogs;", which I did. Here's the output:
RMAN> alter database open resetlogs;
database opened
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-06553: PLS-801: internal error [56319]
I've done all of this twice now, with the same result. I've googled PLS-801 and found more than a few instances of people getting this code, but not during a database open after a restore. Can anyone shed some light on what might have gone wrong? In the interest of brevity, I left out the rest of the restore process prior to running the database restore, but other than setting "compatible" and "db_recovery_file_dest_size", it was all by the book.
Thanks in advance.Thanks for the reply Pierre.
I am not using RMAN Duplicate. Yes, the source of the backup is an RAC. The destination is a single server, with the DB on the filesystem. Here's an overview of of the commands I ran and the procedure.
Copied tar'd backup controlfile and datafiles to destination machine. Untar'd. Install 10.2.0.1.0 on destination machine, patch to 10.2.0.2.0.
OS> sqlplus /nologin
SQL> alter system set compatible = '10.2.0.2.0' scope=spfile;
SQL> alter system set db_recovery_dest_file_size = '8g'; scope spfile;
SQL> shutdown immediate;
SQL> startup; (to verify changes took...)
SQL> shutdown immediate;
OS> Copy control file from untar'd dir and place in $ORACLE_HOME/dbs/, truncate name to c-DBID-date-00.
OS> rman target /
RMAN> startup nomount;
RMAN> set dbid <dbid from control file>;
RMAN> restore controlfile from autobackup; (finds control file with no problem...)
RMAN> alter database mount;
RMAN> @/home/oracle/rman_dr.rman (script cited in first post, to rename datafiles from ASM to filesystem, restore, switch files, and recover...)
RMAN> alter database open resetlogs; (as cited before...)
If I'm not using Duplicate and not specifying dates, the UNTIL/SET UNTIL commands aren't necessary, correct? -
RMAN-03015: error occurred in stored script Memory Script
getting this error during
target db is 10202 & aux is 10204 ?
duplicate target database to dcxt;
RMAN> connect TARGET SYS/spurs_04@capq;
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
connected to target database: CAPQ (DBID=2420849281)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10039: error encountered while polling for RPC completion on channel clone_default
RMAN-10006: error running SQL statement: select action from gv$session where sid=:1 and serial#=:2 and inst_id=:3
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-10041: Could not re-create polling channel context following failure.
RMAN-10024: error setting up for rpc polling
RMAN-10005: error opening cursor
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-03002: failure of Duplicate Db command at 05/21/2010 15:32:29
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
oracle:tuldcorpadb01:dcxt$
Edited by: DBA2008 on May 21, 2010 3:37 PMnever mind, i resolved this by switching duplicate db to 10203....and adjusting log_arch_dest .....
-
Error during a system copy with HANA DB
Hello,
I´m doing a system copy in a SAP ERP 6.0 EHP7 with SAP HANA DB.
During a homogeneous system copy procedure with SWPM, it show me the following error during the phase Database refresh postload-activities.
I checked some log files:
-- sapinst.log:
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("S:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
INFO 2014-08-24 16:14:01.234
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.343
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\saplikey.log.
INFO 2014-08-24 16:14:01.390
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.422
Output of S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX is written to the logfile saplikey.log.
WARNING 2014-08-24 16:14:01.640
Execution of the command "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX" finished with return code 2. Output:
saplikey: failed to connect to the database.
ERROR 2014-08-24 16:14:01.640
CJS-30023 Process call 'S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
ERROR 2014-08-24 16:14:01.703
FCO-00011 The step createTempLicense with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .).
INFO 2014-08-24 16:14:02.31
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\__instana_tmp.xml.
INFO 2014-08-24 16:14:02.734
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
INFO 2014-08-24 16:14:02.734
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
-- saplikey.log:
saplikey: failed to connect to the database.
-- dev_likey:
-> init()
STATEMENT_CACHE_SIZE = 1000
-> init()
-> loadClientRuntime()
Loading SQLDBC client runtime ...
SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll
SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510
SQLDBC client runtime is 1.00.80.00.0391861
-> getNewConnection()
<- getNewConnection(con_hdl=0)
-> checkEnvironment(con_hdl=0)
-> connect(con_info_p=0000000000000000)
Try to connect via secure store (DEFAULT) on connection 0 ...
*** ERROR => Connect to database failed, rc=1, rcSQL=10
[dbhdbsql.cpp 332]
SQLCODE : 10
SQLERRTEXT : invalid username or password:
-> SetSdbDbslCA(errcode=10)
-> freeConnection(con_hdl=0)
close all opened locators of connection 0
} DbSlHDBConnect(rc=99)
***LOG BY2=> sql error 10 performing CON [dblink 559]
***LOG BY0=> invalid username or password: [dblink 559]
*** ERROR => saplikey: failed to connect to the database. [saplikey.c 830]
release memory of the SIBU buffers
release memory of the STATEMENT CACHE
Can you help me please!? This is very urgent!
Thank you,
samid raifHello John Appleby,
I ran the R3trans -d and this is the output:
4 ETW000 r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.08.2014 - 20:22:19
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Sun Aug 24 20:22:19 2014 124 0.000124
4 ETW000 [ dev trc,00000] db_con_init called 103 0.000227
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
4 ETW000 94 0.000321
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 44 0.000365
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 26 0.000391
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 64 0.000455
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEEFE00000
4 ETW000 5889 0.006344
4 ETW000 [ dev trc,00000] using "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\dbhdbslib.dll" 35 0.006379
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 36 0.006415
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 52 0.006467
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.43) 111 0.006578
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 39 0.006617
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 63 0.006680
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 81 0.006761
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 40 0.006801
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006830
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000221F280) 34 0.006864
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006893
4 ETW000 [ dev trc,00000] New connection 0 created 25 0.006918
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 63 0.006981
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141FF5E40) 49 0.007030
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 30 0.007060
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 31 0.007091
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 42 0.007133
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 28 0.007161
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 124 0.007285
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 61 0.007346
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.043 (Make PL 0.43) 65 0.007411
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 37 0.007448
4 ETW000 [ dev trc,00000] (0.043) R3szchk with partitioned tables (note 2040561) 32 0.007480
4 ETW000 [ dev trc,00000] (0.031) New DBCON syntax for HANA (note 1983389) 50 0.007530
4 ETW000 [ dev trc,00000] (0.028) Bulk insert stop on duplicate, dbsl returncode corrected (note 1996982)
4 ETW000 51 0.007581
4 ETW000 [ dev trc,00000] (0.027) Set DBAREQ class (note 1991383) 35 0.007616
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 36 0.007652
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 53 0.007705
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 35 0.007740
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 52 0.007792
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 36 0.007828
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 32 0.007860
4 ETW000 [ dev trc,00000] 22 0.007882
4 ETW000 [ dev trc,00000] -> init() 33 0.007915
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 212 0.008127
4 ETW000 [ dev trc,00000] -> init() 615 0.008742
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 46 0.008788
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 31 0.008819
4 ETW000 [ dev trc,00000] SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll 1327 0.010146
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510 84 0.010230
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.80.00.0391861 50 0.010280
4 ETW000 [ dev trc,00000] -> getNewConnection() 37 0.010317
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 100 0.010417
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 53 0.010470
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 42 0.010512
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 86 0.010598
4 ETW000 [dbhdbsql.cpp,00000] *** ERROR => Connect to database failed, rc=1, rcSQL=10 11122 0.021720
4 ETW000 [ dev trc,00000] SQLCODE : 10 68 0.021788
4 ETW000 [ dev trc,00000] SQLERRTEXT : invalid username or password: 40 0.021828
4 ETW000 [ dev trc,00000] -> SetSdbDbslCA(errcode=10) 41 0.021869
4 ETW000 [ dev trc,00000] -> freeConnection(con_hdl=0) 43 0.021912
4 ETW000 [ dev trc,00000] close all opened locators of connection 0 60 0.021972
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=99) 65 0.022037
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 10 performing CON 68 0.022105
4 ETW000 [ dblink ,00000] ***LOG BY0=>invalid username or password: 35 0.022140
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=0000000140541C48) 107 0.022247
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 79 0.022326
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002215998) 38 0.022364
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022392
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002215990) 33 0.022425
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 43 0.022468
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=00000000022159B0) 35 0.022503
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 27 0.022530
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=0000000002215A00) 33 0.022563
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022591
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
4 ETW000 [ dev trc,00000] release memory of the SIBU buffers 2900 0.025491
4 ETW000 [ dev trc,00000] release memory of the STATEMENT CACHE 91 0.025582
Maybe you are looking for
-
What did the EFI update do?
Exactly what did the update do? It said it fixed start up, and wake from sleep problems. I'm wondering if it fixed my problem, or if I still have to re-install OSX. I called apple care a few days ago, they said that my hard drive wasn't mounting corr
-
Ipod classic 5th gen not working
I get a big red "X" with it pointing to Apple's support web page for the ipod, as well as the appearance of the Apple logo. I tried going to the web page and troubleshooting, but to no avail. Help!
-
Links instead of whole package path
Hello! JavaDoc works very fine but there is one little thing that troubles me. In the standard Java 5 API every class and it's packages are represented as links (e.g. java.io.File is displayed as File). Regretfully I did not find a possibility how th
-
Raw material - Returned to vendor
Hai, I was purchase a raw material from vendor, I have put the GRPO for the corresponding material. This item has the following tick in the Item Master Data: 1) Inventory Item 2) Purchase Item and 3)Quality required. After purchasing this I have chec
-
Which codec should I use to edit HD footage in Premiere Pro?
I am shooting with a Sony NXCAM which gives me AVCHD .MTS files. I am an old FCP user switching to Premiere Pro. I used to transcode the footage to Apple Pro Res 422 and most of my stock footage is now in this codec. I know Premiere Pro accepts all c