RMAN-06024: no backup or copy of the control file found to restore
I am cloning a new database using a full backup from previous nightly rman backup using a standby database utilizing catalog. When I run the duplicate command, I get
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2011 15:04:05
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
But the backup of controlfile does exists in the right place. What am I missing?
958210 wrote:
i was trying to clone a database to a remote machine, but it is giving me the following error
'RMAN-06024: no backup or copy of the control file found to restore
ORA-19505: failed to identify file "/u01/app/oracle/product/11.2.0/dbs/c-1617115651-20120912-02"
even though i can list the backup of the control file in the source machine.
thank you
'How do I ask a question on the forums?
SQL and PL/SQL FAQ
Since we don't know what you did, so we can't know what you did wrong
Similar Messages
-
Restore from OSB. RMAN-06024: no backup or copy of the control file found
I backed up controlfile for standby on production server to OSB media:
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:15:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: EMGC (DBID=1838014073)
connected to recovery catalog database
RMAN>
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
BACKUP CURRENT CONTROLFILE FOR STANDBY tag 'stb_ctl';
RELEASE CHANNEL ch1;
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: ch1
channel ch1: sid=1085 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 25-JAN-11
channel ch1: starting compressed full datafile backupset
channel ch1: specifying datafile(s) in backupset
including standby control file in backupset
channel ch1: starting piece 1 at 25-JAN-11
channel ch1: finished piece 1 at 25-JAN-11
piece handle=1em30ngu_1_1 tag=STB_CTL comment=API Version 2.0,MMS Version 10.3.0.2
channel ch1: backup set complete, elapsed time: 00:00:27
Finished backup at 25-JAN-11
released channel: ch1
RMAN> list backup of controlfile;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RMAN configuration parameters are successfully reset to default value
starting full resync of recovery catalog
full resync complete
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN>
On standby server I try to restore this control file but there is some trouble with restore... By the way I can delete that backup piece...
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:34:32 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: emgc (not mounted)
connected to recovery catalog database
RMAN> set DBID=1838014073;
executing command: SET DBID
database name is "EMGC" and DBID is 1838014073
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
crosscheck backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Crosschecked 1 objects
released channel: ch1
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
RESTORE CONTROLFILE FROM TAG 'STB_CTL';
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting restore at 25-JAN-11
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2011 15:35:20
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
delete noprompt backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1480 1479 1 1 AVAILABLE SBT_TAPE 1em30ngu_1_1
deleted backup piece
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Deleted 1 objects
released channel: ch1
RMAN>You cannot specify a tag for a standby control file.
read here
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1002594
Edited by: Adigozalov Gurban on Jan 25, 2011 2:14 PM -
RMAN-06023: no backup or copy of datafile 5 found to restore ??
Hi,
Am on
Apps 12.0.4
DB 10gR2
Am trying to recover a datafile: got below error ?
Hex dump of (file 5, block 11701) in trace file /u01/app/oracle/admin/ora10g/udump/ora10g_ora_6482.trc
Corrupt block relative dba: 0x01402db5 (file 5, block 11701)
Bad check value found during backing up datafile
Data in bad block:
type: 0 format: 2 rdba: 0x01402db5
last change scn: 0×0000.00000000 seq: 0×1 flg: 0×05
spare1: 0×0 spare2: 0×0 spare3: 0×0
consistency value in tail: 0×00000001
check value in block header: 0x8bf5
computed block checksum: 0×2
Reread of blocknum=11701, file=/u01/app/oracle/oradata/ora10g/example01.dbf. found same corrupt data
RMAN> blockrecover datafile 5 block 11701;
Starting blockrecover at 23-AUG-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=139 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of blockrecover command at 10/23/2011 19:40:13
RMAN-06026: some targets not found – aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
i dont have a backup of this datafile
Thanks
Edited by: NewAppsDBA on Oct 24, 2011 6:23 AMRMAN-03002: failure of blockrecover command at 10/23/2011 19:40:13
RMAN-06026: some targets not found – aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restoreSearch MOS for those errors and go through the docs.
Thanks,
Hussein -
RMAN-06023: no backup or copy of datafile 3 found to restore
Hello,
i have searched the whole forum, but i didnt get anything.
i have rman backupset (x64), and i am trying to restore it to another machine, (same characteristic) but i got the error below.
help please.... :(
RMAN> run
2> {
3> ALLOCATE CHANNEL C1 DEVICE TYPE DISK;
4> RESTORE DATABASE;
5> }
using target database control file instead of recovery catalog
allocated channel: C1
channel C1: SID=170 device type=DISK
Starting restore at 03-MAY-10
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/03/2010 11:16:00
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Hello,
i am using 10 g and my backup set, is that enough?
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
79 Full 12.85G DISK 00:26:51 12-JUN-09
BP Key: 79 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_06
1209042215
Piece Name: F:\RMAN_BACKUP\2NKHDHB1_1_1
List of Datafiles in backup set 79
File LV Type Ckp SCN Ckp Time Name
1 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01.DBF
2 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01.DB
F
3 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01.DBF
4 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01.DBF
5 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01.DB
F
7 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIME
NSIONS_01.DBF
8 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACT
S_01_REORG0_REORG0.DBF
9 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDE
XES_01.DBF
10 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_01_REORG0.DBF
11 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIME
NSIONS_01.DBF
12 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACT
S_01_REORG0_REORG0.DBF
13 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDE
XES_01.DBF
15 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAG
ING_01_REORG0.DBF
16 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_02_REORG0.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
80 Full 7.17M DISK 00:00:04 12-JUN-09
BP Key: 80 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_06
1209042215
Piece Name: F:\RMAN_BACKUP\2OKHDITH_1_1
SPFILE Included: Modification time: 12-JUN-09
Control File Included: Ckp SCN: 4254271191 Ckp time: 12-JUN-09
BS Key Type LV Size Device Type Elapsed Time Completion Time
81 Full 13.29G DISK 00:33:30 22-APR-10
BP Key: 81 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_04
2210052403
Piece Name: F:\RMAN_BACKUP\2PLBPCV8_1_1
List of Datafiles in backup set 81
File LV Type Ckp SCN Ckp Time Name
1 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01.DBF
2 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01.DB
F
3 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01.DBF
4 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01.DBF
5 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01.DB
F
7 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIME
NSIONS_01.DBF
8 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACT
S_01_REORG0_REORG0.DBF
9 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDE
XES_01.DBF
10 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_01_REORG0.DBF
11 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIME
NSIONS_01.DBF
12 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACT
S_01_REORG0_REORG0.DBF
13 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDE
XES_01.DBF
15 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAG
ING_01_REORG0.DBF
16 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_02_REORG0.DBF
RMAN> -
Problem about RMAN-06023: no backup or copy of datafile 5 found to restore
here is the error info when i duplicate database use rman
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/19/2011 09:33:39
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
and following my operate steps
==================
auxiliary instance configure
1, create password file
$ orapwd file=/opt/app/oracle/product/10.2.0/db_1/dbs/orapwslavedb password=Myss123456 entries=30
2,edit tnsname.ora on auxilary so i can connect primary db and auxiliary
$ vi tnsname.ora (tnsping test pass)
PRIDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.40.214)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = pridb)
3,create pfile for auxiliary instance
$ vi initslavedb.ora
*.DB_BLOCK_SIZE=8192
*.DB_NAME=slavedb
*.CONTROL_FILES='/opt/app/oracle/oradata/slavedb/control01.ctl','/opt/app/oracl
e/oradata/slavedb/control02.ctl','/opt/app/oracle/oradata/slavedb/control03.ctl'
*.DB_FILE_NAME_CONVERT='/opt/app/oracle/oradata/primaryd','/opt/app/oracle/oradata/slavedb'
*.LOG_FILE_NAME_CONVERT='/opt/app/oracle/oradata/primaryd','/opt/app/oracle/oradata/slavedb'
4,start auxiliary instance nomount and create spfile,then shutdown it,and startup to nomount status again
5,backup target database
RMAN> backup database;
6, create directory on slavedb,and transforer target backupset and archlog to salvedb
$ mkdir -p /opt/app/oracle/flash_recovery_area/PRIDB/backupset/2011_08_19
$ mkdir -p /opt/app/oracle/flash_recovery_area/PRIDB/archivelog/2011_08_19
7,run duplicate commandline on auxiliary
[oracle@localhost admin]$ rman target sys/Myss123456@pridb auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Aug 19 10:46:05 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: PRIDB (DBID=969477968, not open)
connected to auxiliary database: SLAVEDB (not mounted)
RMAN> duplicate target database to 'slavedb'
2> nofilenamecheck;
Starting Duplicate Db at 19-AUG-2011 10:46:15
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=35 devtype=DISK
contents of Memory Script:
set until scn 490864;
set newname for datafile 1 to
"/opt/app/oracle/oradata/slavedb/system01.dbf";
set newname for datafile 2 to
"/opt/app/oracle/oradata/slavedb/undotbs01.dbf";
set newname for datafile 3 to
"/opt/app/oracle/oradata/slavedb/sysaux01.dbf";
set newname for datafile 4 to
"/opt/app/oracle/oradata/slavedb/users01.dbf";
set newname for datafile 5 to
"/opt/app/oracle/oradata/slavedb/example01.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 19-AUG-2011 10:46:16
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/19/2011 10:46:16
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
anyone can help?use format command with backup.
eg:-
backup as compressed backupset database format '/u01/db/backup/%d_%I_%s_%T';
if it is archivelog mode then
backup as compressed backupset database format '/u01/db/backup/%d_%I_%s_%T' plus archivelog format '/u01/db/backup/%d_%I_%s_%T';
then copy the backup to the auxiliary instance server.
then try again the duplicate command. -
RMAN-06023: no backup or copy of datafile
Hi,
on 10g R2 on AIX, I want to recover my DB at the time of 26 of march. The backup files are available but I receive :
RMAN> Run {
2> SET UNTIL TIME "to_date('26-03-2011 00:00:00','DD-MM-YYYY HH24:MI:SS')";
3> allocate channel t1 type disk;
4> restore database;
5> recover database;
6> sql "alter database open";
7> }
8>
executing command: SET until clause
allocated channel: t1
channel t1: sid=155 devtype=DISK
Starting restore at 01-APR-11
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/01/2011 11:13:42
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 216 found to restore
RMAN-06023: no backup or copy of datafile 215 found to restore
RMAN-06023: no backup or copy of datafile 214 found to restoreWhy RMAN can't find them ?
How to verify ?
Thank for help.Hi,
Can you please make sure the restore mechanism you are following is correct or not?
Mechanics of Restore Operations
RMAN automates the procedure for restoring files. You do not need to go into the operating system, locate the backup that you want to use, and manually copy files into the appropriate directories. When you issue a RESTORE command, RMAN directs a server session to restore the correct backups to either:
* The default location, overwriting the files with the same name currently there
* A new location, which you can specify with the SET NEWNAME command
To restore a datafile, either mount the database or keep it open and take the datafile to be restored offline. When RMAN performs a restore, it creates the restored files as datafile image copies and records them in the repository.
refer the link for more information
http://download.oracle.com/docs/cd/B12037_01/server.101/b10734/rcmconc2.htm
Best regards,
Rafi.
http://rafioracledba.blogspot.com/ -
RMAN-06023: no backup or copy of datafile n found to restore
Hi,
on 11g R2 , Win 2008, I try to duplicate by RMAN NOCATALOG.
In init.ora of auxiliary I have :
init.ora
db_file_name_convert=('m:\base\OLDDB\data','m:\base\NEWDB\data')
log_file_name_convert=('m:\base\OLDDB\log', 'm:\base\NEWDB\log') 1- when duplicating RMAN displays :
set newname for datafile 109 to
"M:\BASES\OLDDB\DATA\EOIUAPP.DBF";; but for me reverse is expected since M:\BASES\OLDDB\DATA\EOIUAPP.DBF is the ancient/old name.
2-RMAN displays :
channel ORA_AUX_DISK_1: restoring datafile 00041 to M:\BASES\OLDDB\DATA\EOIUAPP.DBF But again the datafile should be restored to 'm:\base\NEWDB\data'.
And also:
channel ORA_AUX_DISK_1: reading from backup piece \\server\RMAN$\BACKUP\OLDDB\RMAN\FULL\DF_OLDDB_20120909_196_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece \\server\RMAN$\BACKUP\OLDDB\RMAN\FULL\DF_OLDDB_20120909_196_1
ORA-19504: failed to create file "M:\BASES\OLDDB\DATA\PSIMAGE.DBF";
ORA-27040: file create error, unable to create file
OSD-04002: can not open file
O/S-Error: (OS 3) file path not found. Finally :
RMAN-06023: no backup or copy of datafile n found to restore For all files.
Thanks for help.Hello
setfilename has "BASES" but logfile convert has "base"
M:\BASESand
db_file_name_convert=('m:\base\OLDDB\data','m:\base\NEWDB\data') Best Regards
mseberg
Edited by: mseberg on Sep 20, 2012 7:41 AM -
RMAN-06023: no backup or copy of datafile 12 found to restore
Hi
I'm getting the above error when trying to create a duplicate database on the same server.
Steps
1) Create backup.
CONFIGURE CONTROLFILE AUTOBACKUP ON;
backup as copy
incremental level 0
spfile
database
include current controlfile;
2) Restore / Duplicate
Have database orcl2 which is on the same server as ORCL1. Performing a no catalog recovery.
I get the following error.
executing Memory Script
executing command: SET until clause
Starting restore at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=555 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2011 16:02:24
RMAN-01005: not all datafiles have backups that can be recovered to scn 666967
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
All the datafiles are not found. Not sure how this is possible as I just did the backup.
Command for Duplication :
DUPLICATE TARGET DATABASE TO ORCL2
DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
SPFILE
PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
Additional Information
RMAN> list backup
2> ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
13 Full 16.77M DISK 00:00:01 14-MAR-11
BP Key: 13 Status: AVAILABLE Compressed: NO Tag: TAG20110314T155530
Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\ORCL1\AUTOBACKUP\2011_03_14\O1_
MF_S_745775730_6QWWOM7G_.BKP
SPFILE Included: Modification time: 14-MAR-11
SPFILE db_unique_name: ORCL1
Control File Included: Ckp SCN: 731378 Ckp time: 14-MAR-11
RMAN>
Any help would be appreciated.
Thanks.ORADBA , thank you for your help.
Did as you suggested but still getting the same error
RMAN> DUPLICATE TARGET DATABASE TO ORCL2
2> DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
3> SPFILE
4> PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
5> SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
6> until scn = 666967;
Starting Duplicate Db at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=537 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2011 18:12:47
RMAN-06136: ORACLE error from auxiliary database: ORA-01565: error in identifyin
g file 'C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
RMAN> exit
Recovery Manager complete.
C:\Documents and Settings\Administrator>rman target sys/mariorun@orcl1 nocatalog
Recovery Manager: Release 11.1.0.7.0 - Production on Mon Mar 14 18:13:20 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: ORCL1 (DBID=1129792691)
using target database control file instead of recovery catalog
RMAN> connect auxiliary sys/mariorun@orcl2
connected to auxiliary database: ORCL2 (not mounted)
RMAN>
RMAN> DUPLICATE TARGET DATABASE TO ORCL2
2> DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
3> SPFILE
4> PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
5> SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
6> until scn = 666967;
Starting Duplicate Db at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=97 device type=DISK
contents of Memory Script:
set until scn 666967;
restore clone spfile to 'C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA';
sql clone "alter system set spfile= ''C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFIL
EORCL2.ORA''";
executing Memory Script
executing command: SET until clause
Starting restore at 14-MAR-11
using channel ORA_AUX_DISK_1
WARNING: A restore time was estimated based on the supplied UNTIL SCN
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring SPFILE
output file name=C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA
channel ORA_AUX_DISK_1: reading from backup piece D:\ORACLE\FAST_RECOVERY_AREA\O
RCL1\AUTOBACKUP\2011_03_14\O1_MF_S_745775730_6QWWOM7G_.BKP
channel ORA_AUX_DISK_1: piece handle=D:\ORACLE\FAST_RECOVERY_AREA\ORCL1\AUTOBACK
UP\2011_03_14\O1_MF_S_745775730_6QWWOM7G_.BKP tag=TAG20110314T155530
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
Finished restore at 14-MAR-11
sql statement: alter system set spfile= ''C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFI
LEORCL2.ORA''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL2'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set audit_file_dest =
''c:\oracle\ora11g\admin\orcl2\adump'' comment=
'''' scope=spfile";
sql clone "alter system set control_files =
''c:\oracle\ora11g\oradata\orcl2\control01.ctl'', ''c:\oracle\ora11g\oradata\or
cl2\control02.ctl'', ''c:\oracle\ora11g\oradata\orcl2\control03.ctl'' comment=
'''' scope=spfile";
sql clone "alter system set LOG_FILE_NAME_CONVERT =
''\orcl1'', ''\orcl2'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount ;
executing Memory Script
sql statement: alter system set db_name = ''ORCL2'' comment= ''duplicate'' sco
pe=spfile
sql statement: alter system set audit_file_dest = ''c:\oracle\ora11g\admin\orc
l2\adump'' comment= '''' scope=spfile
sql statement: alter system set control_files = ''c:\oracle\ora11g\oradata\orc
l2\control01.ctl'', ''c:\oracle\ora11g\oradata\orcl2\control02.ctl'', ''c:\oracl
e\ora11g\oradata\orcl2\control03.ctl'' comment= '''' scope=spfile
sql statement: alter system set LOG_FILE_NAME_CONVERT = ''\orcl1'', ''\orcl2''
comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 267825152 bytes
Fixed Size 1346712 bytes
Variable Size 100664168 bytes
Database Buffers 163577856 bytes
Redo Buffers 2236416 bytes
contents of Memory Script:
set until scn 666967;
set newname for datafile 1 to
"D:\ORACLE\ORADATA\ORCL2\SYSTEM01.DBF";
set newname for datafile 2 to
"D:\ORACLE\ORADATA\ORCL2\SYSAUX01.DBF";
set newname for datafile 3 to
"D:\ORACLE\ORADATA\ORCL2\UNDOTBS01.DBF";
set newname for datafile 4 to
"D:\ORACLE\ORADATA\ORCL2\IM_DATA_01.DAT";
set newname for datafile 5 to
"D:\ORACLE\ORADATA\ORCL2\IM_IDX_01.DAT";
set newname for datafile 6 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_DATA_01.DAT";
set newname for datafile 7 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_DATA_02.DAT";
set newname for datafile 8 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_IDX_01.DAT";
set newname for datafile 9 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_IDX_02.DAT";
set newname for datafile 10 to
"D:\ORACLE\ORADATA\ORCL2\IM_PROC_LOG_01.DAT";
set newname for datafile 11 to
"D:\ORACLE\ORADATA\ORCL2\IM_PROC_NOLOG_01.DAT";
set newname for datafile 12 to
"D:\ORACLE\ORADATA\ORCL2\USERS01.DBF";
restore
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=555 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2011 18:13:59
RMAN-01005: not all datafiles have backups that can be recovered to scn 666967
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
Any suggestions are appreciated. -
I can only backup the datafiles but not the control files and SPFiles
Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qianthe string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen -
I had to re-load my OS (Windows XP Pro) from a HD snapshot via Acronis True Image Server. I save my OS on my C: drive and all my data files on my D: drive. So when I re-loaded my OS, I still have all of my music files intact.
I have re-loaded the OS before and had to re-create iTunes library which I did by doing the follwing:
1. cut & paste .xml file in iTunes folder to desktop
2. delete .itl file in iTunes folder
3. import .xml file through iTunes file>library>iport playlist
4. navigate to .xml file on desktop and import
This worked last time I re-loaded my OS but not this time for some reason.
So I'm wondering if there is a copy of the .xml file on the iPod itself in the iPod_Control folder that I can copy and paste to my comuter desktop and import via the above steps?
I have seen all kinds of solutions on the web that include copying the music files from the iPod to the computer. I don't need to do that. I have the music files. I just need the .xml file so iTunes can talk to my iPod (5th Generation - 30G).Backup your music library, that is the only way to ensure it does not go missing through theft, damage, operator error, machine breaks, upgrades go wrong, operator goes wrong .........
-
I own multiple systems. I have hardened one browser following the guideline provided by CISecurity. Instead of repeating all the configurations performed on that one system, can I just copy all the ".js" files from the secured system to my other systems?
The ".js" files can be modified using a text editor. Is there a way to lock down these files to prevent modification?Dear Joel
i know two ways to prevent browser from caching your files
First : The Hard way
just add ? +Math.random() in the end of your file
Like this :
in HTML :
<script type="text/javascript">
(function(){
var e = document.getElementsByTagName("script")[0];
var d = document.createElement("script");
d.src = "index_edgePreload.js?"+Math.random()+"";
d.type = "application/javascript";
d.async = true;
d.defer = true;
e.parentNode.insertBefore(d,e);
</script>
instead of this Line in HTML that created by EA :
<script type="application/javascript" src="index_edgePreload.js></script>
Disadvantage : you should do this for all of files you want to prevent from caching
===================================================
Second : The easyest way
You Should have Access to .htaccess file in your Server
Open your .htaccess file and paste these codes in it :
ExpiresActive On
ExpiresByType application/json "access plus 1 seconds"
ExpiresByType text/json "access plus 1 seconds"
ExpiresByType text/plain "access plus 1 seconds"
ExpiresDefault "access plus 1 month"
you can type what ever type of file you want to prevent from caching in browser
Advantage : after do this in your .htaccess file all files with the type you want will not Cache in your browser
Easy is'nt it ?
Zaxist -
Database creation having a trace of the control file
Hi,
I want to move a database from one server let's say A to another server let's say B I have a copy of all the datafiles, redo logs, control files and init file of the database fron the server A. I have a trace of the control file.
I copied all these files on the server B in the location /dispecer_date/oradata, except init which is in ORACLE_HOME/dbs
I thought that the simplest method to recreate the database is from the backup of the control file writing in sql the command CREATE CONTROLFILE how is written in trace and replacing the word REUSE with the word SET in CREATE CONTROLFILE instruction.
I obtained an error:
ORA-01503: Create controlfile failed
ORA-01160: file is not a data file
ORA-01110: datafile: '/dispecer_date/oradata/system.dbf'
Why? The db_block_size parameter is 4096.
Thank you,
MihaelaHere are the steps .....
sql > shutdown immediate ;
create identical dir structure on server b
copy all datafile,controlfile,redologfiles and pfile to target server ,And put them in same dir as of source.
now on taget server
sql > startup mountpfile = path of the pfile
sql > alter database opn
or
sql > alter database open resetlogs ;
this will do the trick, I don;t think recreating the controlfile is a good option hare , becuse you likly to loose some data if you stick on that one.
hare krishna
Alok -
Restore - filename for datafile is missing in the control file
I am practicing RMAN recovery procedures and I encountered a problem that I do not know how to solve.
1) I took a hot backup of my test database.
2) Create tablespace TS_DATA_TEMP
3) Deleted tablespace TS_DATA which had 2 datafiles
4) Created tablespace TS_DATA with 1 datafile
5) shutdown database
6) logged into RMAN in nomount
7) restore controlfile from autobackup;
8) alter database mount;
9) restore database;
RMAN> restore database;
Starting restore at 22-AUG-08
using channel ORA_DISK_1
the filename for datafile 5 is missing in the control file
skipping datafile 1; already restored to file /u02/oradata/EDM91/system01.dbf
skipping datafile 2; already restored to file /u02/oradata/EDM91/undotbs01.dbf
skipping datafile 6; already restored to file /u02/oradata/EDM91/index
skipping datafile 3; already restored to file /u02/oradata/EDM91/sysaux01.dbf
skipping datafile 7; already restored to file /u03/oradata/EDM91/TS_INDEX01.dbf
skipping datafile 9; already restored to file /u03/oradata/EDM91/TS_LOB01.dbf
skipping datafile 4; already restored to file /u02/oradata/EDM91/users01.dbf
restore not done; all files readonly, offline, or already restored
Finished restore at 22-AUG-08
10) tried to recover
Starting recover at 22-AUG-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/22/2008 15:04:22
RMAN-06094: datafile 5 must be restored
SQL> select name from v$datafile where file#=5;
NAME
/u04/oradata/EDM91/TS_DATA.dbf
12) alter database backup controlfile to trace
DATAFILE
'/u02/oradata/EDM91/system01.dbf',
'/u02/oradata/EDM91/undotbs01.dbf',
'/u02/oradata/EDM91/sysaux01.dbf',
'/u02/oradata/EDM91/users01.dbf',
'/u04/oradata/EDM91/TS_DATA.dbf',
'/u02/oradata/EDM91/index',
'/u03/oradata/EDM91/TS_INDEX01.dbf',
'/u04/oradata/EDM91/TS_DATA02.dbf',
'/u03/oradata/EDM91/TS_LOB01.dbf'
CHARACTER SET UTF8
So i'm not sure what the problem is. Datafile TS_DATA.dbf is located in the control file but i'm getting the error: the filename for datafile 5 is missing in the control file.
Suggestions on what's wrong with the control file?I found my mistake; a newbie error.
I did not know I needed to include in my restore command the 'until' option when doing incomplete recovery. I only included the 'until' option in the recover command:
original command
restore database;
recover database until sequence =123;
should be
restore database until sequence = 123;
recover database until sequence =123;
I usually run the command using a RUN block with a SET UNTIL SEQUENCE but this case I used the single commands separately.
RUN
+{+
SET UNTIL sequence 123;
RESTORE DATABASE;
RECOVER DATABASE;
+}+ -
Instances where the control file needs to be backed up
Oracle Version --> 11G
Control file needs to backed up
1. When you add or rename datafiles
2. Add or Drop redo log members
3. Dropping tablespaces
4. After any ALTER DATABASE commandAre there any more instances where we have to backup the control file?T.Boyd wrote:
Oracle Version --> 11G
Control file needs to backed up
1. When you add or rename datafiles
2. Add or Drop redo log members
3. Dropping tablespaces
4. After any ALTER DATABASE commandAre there any more instances where we have to backup the control file?Anything that actually updates the control file. like maybe taking a backup with rman?
"set controlfile autoback on" is your friend.
"set it and forget it." -
Solaris 9 Oracle 9i
If one has got 2 sets of the control file eg control01, control02. can one delete one set if one needs space desperately and have a backup copy somewhere?
Thanx.NPD wrote:
so this means it can be deleted if one wants toIf you could, it is highly not recommanded. You'd go to a not safely situation (imagine you lose the other one for some reason...). Furthermore, controflile are not Giga file size, I'm pretty sure you'll gain almost peanuts of space by removing a controlfile.
Nicolas.
Maybe you are looking for
-
Mac Pro Locked Up and Now One Video Card and Audio Not Working
Last night, my Mac Pro totally locked up to the point I had to power it off to get it to do anything. When restarted, one of my video cards and my audio are no longer working. I have dual monitors so tried switching the connections to see if it was t
-
How can I Include Multimedia in ApEx
Is it possible to include multimedia, such as sound (.wav) files or Flash graphics in an ApEx application? Thanks, Gregory
-
Mapping External Message Error: StackOverFlowError
Hi, Just to give a background first, I have an xsd external message defined, which I have to use for a certain map. Whenever I try to use it as a target message during mapping, I get an INTERNAL_PROBLEM StackOverFlowError message. Because of this,
-
When running an external job on Oracle 10g in Windows, it seems that the external job username is no name at all. In the file which is kicked off by the scheduler job I put this line: echo "%username%" >> %SI_HOME%\lib\imp_data.log which produces ju
-
Does anyone know why I can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?