Rman backup errors..

hi guru's
please tell me the answeres..for this
what will happen if we re run the Rman backup due to the job failure...will take a new backup from the begining? or will start from the first backup end where it left ?
i am deleting some archieved logs on the archieved destination before takeing the RMAN backup, and then running rman backup ...then any error will raised for the missing files during Rman archive log backup for missing files? i have the files like 1 to 10 ...in that 5 and 6 logs are deleted before takeing the Rman backup..how to resolve this?

user13014926 wrote:
hi guru's
please tell me the answeres..for this
what will happen if we re run the Rman backup due to the job failure...will take a new backup from the begining? or will start from the first backup end where it left ?
You can continue backup from which files not backed up and this is call restartable backup.Please refer below link
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc1.htm#i1008543
>
i am deleting some archieved logs on the archieved destination before takeing the RMAN backup, and then running rman backup ...then any error will raised for the missing files during Rman archive log backup for missing files? i have the files like 1 to 10 ...in that 5 and 6 logs are deleted before takeing the Rman backup..how to resolve this?If you manually delete archivelogs then you will get an error so before executing this backup command you have to execute CROSSCHECK ARCHIVELOG ALL and DELETE EXPIRED ARCHIVELOG ALL then your problem will solve.

Similar Messages

Restore spfile from rman backup ---- error.

Hi,
I am trying to execute recovery on new machine ...
I have done the following steps..
I have one database as ora10g2 as peroduction database on one machine as hosta
I have created a catalog on another machine cora10g2 (hostb)
I have taken a full backup from hosta as per following ...
the following command execute from hosta machine.
$ rman target sys/<passwd>@ora10g2 catalog rman/rman@cora10g2 ...
Backup completed ...
Now I am trying to restore this backup on hostb machine where i have already rman catlog database ..
I have done the following setting ...on host b
set oracle_sid=DUP
and execute following command ...
rman target / catalog rman/rman@cora10g2
RMAN> set dbid 2760732370
executing command: SET DBID
database name is "BAAN10G2" and DBID is 2760732370
RMAN>
RMAN>
RMAN> startup force nomount ;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/oracle/dbs/baan10g2/dbs/initbaan10g2.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 1977112 bytes
Variable Size 67114216 bytes
Database Buffers 83886080 bytes
Redo Buffers 6406144 bytes
RMAN>
RMAN>
RMAN>
RMAN> show all ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rman/backup/control/cntrl_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/baanora3/rman/ora10g2/bkup_db_%d_s%s_P%p_t%t' MAXPIECESIZE 1024;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
RMAN>
RMAN>
RMAN> list backup of spfile ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
2420 Full 7.33M DISK 00:00:01 14-JUN-07
BP Key: 2426 Status: AVAILABLE Compressed: NO Tag: TAG20070614T182935
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070614-00
SPFILE Included: Modification time: 14-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2509 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2515 Status: AVAILABLE Compressed: NO Tag: TAG20070615T130416
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-00
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2694 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2739 Status: AVAILABLE Compressed: NO Tag: TAG20070615T131703
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-01
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2760 Full 80.00K DISK 00:00:01 15-JUN-07
BP Key: 2763 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163437
Piece Name: /rman/spfile/spfile.ora
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2769 Full 7.33M DISK 00:00:02 15-JUN-07
BP Key: 2771 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163441
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-02
SPFILE Included: Modification time: 15-JUN-07
RMAN>
RMAN>
RMAN> restore spfile from autobackup ;
Starting restore at 19-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=35 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=34 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=33 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20070619
channel ORA_DISK_1: looking for autobackup on day: 20070618
channel ORA_DISK_1: looking for autobackup on day: 20070617
channel ORA_DISK_1: looking for autobackup on day: 20070616
channel ORA_DISK_1: looking for autobackup on day: 20070615
channel ORA_DISK_1: looking for autobackup on day: 20070614
channel ORA_DISK_1: looking for autobackup on day: 20070613
channel ORA_DISK_1: no autobackup in 7 days found
channel ORA_DISK_2: looking for autobackup on day: 20070619
channel ORA_DISK_2: looking for autobackup on day: 20070618
channel ORA_DISK_2: looking for autobackup on day: 20070617
channel ORA_DISK_2: looking for autobackup on day: 20070616
channel ORA_DISK_2: looking for autobackup on day: 20070615
channel ORA_DISK_2: looking for autobackup on day: 20070614
channel ORA_DISK_2: looking for autobackup on day: 20070613
channel ORA_DISK_2: no autobackup in 7 days found
channel ORA_DISK_3: looking for autobackup on day: 20070619
channel ORA_DISK_3: looking for autobackup on day: 20070618
channel ORA_DISK_3: looking for autobackup on day: 20070617
channel ORA_DISK_3: looking for autobackup on day: 20070616
channel ORA_DISK_3: looking for autobackup on day: 20070615
channel ORA_DISK_3: looking for autobackup on day: 20070614
channel ORA_DISK_3: looking for autobackup on day: 20070613
channel ORA_DISK_3: no autobackup in 7 days found
channel ORA_DISK_4: looking for autobackup on day: 20070619
channel ORA_DISK_4: looking for autobackup on day: 20070618
channel ORA_DISK_4: looking for autobackup on day: 20070617
channel ORA_DISK_4: looking for autobackup on day: 20070616
channel ORA_DISK_4: looking for autobackup on day: 20070615
channel ORA_DISK_4: looking for autobackup on day: 20070614
channel ORA_DISK_4: looking for autobackup on day: 20070613
channel ORA_DISK_4: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 06/19/2007 18:00:13
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
RMAN>
I am not able to restore spfile from rman backup ;;;

Hi,
I would like to know few things
1. How are you setting the db_name ? you can set db_id at RMAN, how are you setting the db_name ?
2. Do you have any default init file at default location ? if yes, is the db_name parameter set correctly in that file ?
Since spfile is yet to be restored, you must set the db_name parameter correctly before you start spfile restore.This can be done with init file at default location which can even contain just one paremeter i.e db_name.

RMAN Backup error:ORA-04030: out of process memory

Hi,
Our RMAN backup is failing with below error:
===========================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 05:31:33
ORA-04030: out of process memory when trying to allocate 82444 bytes (pga heap,control file i/o buffer)
=============================
Please suggest
Thanks and Regards

We upgrade our catalog database(Linux) to 10.2.0.4 and our target database is 10.2.0.3(Windows),
we executed upgrade catalog twice and then when we again tried to execute the below command
rman sys/syspwd@targetdb catalog rman/rman@rmancat
Recovery Manager: Release 10.2.0.4.0 - Production on Sat May 22 15:10:36 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
connected to target database: WEBCT (DBID=3699379059)
connected to recovery catalog database
RMAN>
=======================
Still we are getting this error
and our backup falied with below errors:
======================
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current connected to target database: WEBCT (DBID=3699379059) connected to recovery catalog database
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 15:09:44
ORA-06550: line 1, column 14:
PLS-00306: wrong number or types of arguments in call to 'VALIDATEARCHIVEDLOG'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
==========================
Please suggest

Rman backup error

Hi,
I am taking the rman backup i got below error please give me the solution.
Starting backup at 13-DEC-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=33 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=50 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=/u01/oracle/oradata/dev/system01.dbf
input datafile fno=00002 name=/u01/oracle/oradata/dev/undotbs01.dbf
channel ORA_DISK_1: starting piece 1 at 13-DEC-12
channel ORA_DISK_2: starting full datafile backupset
channel ORA_DISK_2: specifying datafile(s) in backupset
input datafile fno=00003 name=/u01/oracle/oradata/dev/sysaux01.dbf
channel ORA_DISK_2: starting piece 1 at 13-DEC-12
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/13/2012 12:05:14
ORA-19504: failed to create file "/u03/rmbackp/1gnsomrp_1_1"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel ORA_DISK_1 disabled, job failed on it will be run on another channel
my mount point has 777 oracle:dba /u03/rmbackup . Below is the my rman configuration parameters.
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/rmbackup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT'/u03/rmbackp/%U';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO'/u03/rmbackup/snapcf_dev.f';
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/rmbackup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT'/u03/rmbackp/%U';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO'/u03/rmbackup/snapcf_dev.f';

Did you see error :
ORA-19504: failed to create file "/u03/rmbackp/1gnsomrp_1_1"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directoryThere haven't directory : /u03/rmbackp and Channel 1 device type disk format is showed : /u03/rmbackp/%U
Error there.
Mahir

RMAN Backup error with Symantec Backup Tool

Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks
Edited by: 873393 on Apr 17, 2012 10:09 AM

Hello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin

Rman backup error in 10g rac

hi,
I am backup 10g rac with rman,but there is some error when backup:
input datafile fno=00006 name=+DG1/orcl/datafile/undotbs3.265.623622323
channel c3: starting piece 1 at 13-JUN-07
RMAN-03009: failure of backup command on c1 channel at 06/13/2007 08:40:50
ORA-19504: failed to create file "/oracle/rman/db_ORCL_20070613_0fik5ji0_1_1_L0"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel c1 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on c3 channel at 06/13/2007 08:40:51
ORA-19504: failed to create file "/oracle/rman/db_ORCL_20070613_0hik5jna_1_1_L0"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel c3 disabled, job failed on it will be run on another channel
released channel: c1
released channel: c2
released channel: c3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of release command at 06/13/2007 08:49:22
RMAN-06012: channel: c1 not allocated

Hi all I have the same problem. We have a 2 node rac with ASM. The archives goes to ASM. I would like to backup the archives from ASM to a filesystem. But i was given a filesystem that is only mounted on one node and it is not accessbile to the other node. When i run the following rman command i get the error on one of the channel that connect to node 2.
My question:
Can i use on channel that is connecting to node1 to backup all the archivelogs generated by node1 and node2 aswell since both the nodes have access to archive logs.
Please assist.
connect target /
connect catalog rmanrep/[email protected]
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/opt/oracle/archive/orcl/rman/cf_%d_%T_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK CONNECT 'SYS/oass@orcl1;
CONFIGURE CHANNEL 2 DEVICE TYPE DISK CONNECT 'SYS/oass@orcl2';
BACKUP CURRENT CONTROLFILE;
backup archivelog all format '/opt/oracle/archive/orcl/arch_bkup/%d_AL_%T_%u_s%s_p%p' delete input;
EXIT;
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 03/17/2009 21:00:25
ORA-19504: failed to create file "/opt/oracle/archive/orcl/arch_bkup/SPTDEV_AL_20090317_2kka60j6_s84_p1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
Thanks
Kart

RMAN backup error in R&D Server

friends,
OS: RHEL 4.8
DB: 10gR2
i am doing some R&D in my 10g test db....
i deleted the last archive log file...then i tried to do rman backup plus archivelog all;
but i am getting an error...then i copy the deleted file in the same location...then the backup is working fine...
suppose if this situation comes in production db what should i do....am i have to wait for the next archive log generation or i have to alter system switch log file;
thanks

Hi,
RMAN>change archivelog all crosscheck;
If below error commes then Your options are either to restore the missing file(s), or to perform a crosscheck. To perform a crosscheck,
run the above command from within RMAN
It is advisable to perform a full backup of the database at this point.
When an archive log crosscheck is performed, RMAN checks each archive log in turn to make sure that it exists on disk (or tape).
Those that are missing are marked as unavailable. If you have got missing logs, this won't bring them back. It will allow you to get
past this error and back-up the database though.
Regards

RMAN BACKUP ERROR in TAPE

Dear Friends,
I am taking a RMAN BACKUP of ORACLE 9i with AIX4.3 with TAPE DRIVE
When i execute the script
RMAN> RUN{
allocate channel c1 type 'SBT_TAPE';
backup tablespace users;
It gets struckup for more than two hours it didn't prompt any errors.
allocated channel: c1
channel c1: sid=13 devtype=SBT_TAPE
channel c1: MMS Version 2.2.0.1
Starting backup at 11-APR-02
channel c1: starting full datafile backupset
channel c1: specifying datafile(s) in backupset
input datafile fno=00007 name=/gloqm/oradata/ORA9011/users01.dbf
channel c1: starting piece 1 at 11-APR-02
LSM was intalled, Is it right to mention the tape is 'SBT_TAPE' or i will have to mention something different.
Could any one help
Thanks in Advance
gandhi

For RMAN topics, please use: {forum:id=74}.

Rman backup error: ORA-19502

I am running a rman backup script with incremental 1 level as
backup as backupset incremental level 1 cumulative device type disk tag 'Baan_bkup$LEVEL_0' database;
recover copy of database;
backup device type disk tag 'Baan_bkup$LEVEL_0' archivelog all not backed up;
backup archivelog until time 'sysdate-6' delete all input;
delete noprompt obsolete device type disk;
It has run almost two weeks and last night it showed this error and failed
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/08/2006 03:02:14
ORA-19502: write error on file "/dbrecovery/flashback/goi1rkdm_1_1", blockno 164865 (blocksize=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 164865
Additional information: 782336
Linux Error: 2: No such file or directory
I checked the df -k and I still have about 6% space in my /dbrecovery disk, a separated space, and I did not find the file indicated either. So was still possible the space is full? or others reason?
I used the "delete obsolete"command in rman but nothing can be deleted.

It seems your filesystem cannot handle large files (> 2G). Use 'maxpiecesize' option of 'allocate channel' command to limit the filesize.
Werner

Rman backup error in oracle grid control

Hi,
I am able to find rman failure and status is Failed so where we can find the error messages in oracle enterprise manager 10g grid control to make sure that it should not happen in future.
Appreciated for your inputs.
Thanks
Prakash

Hi,
I am able to find rman failure and status is Failed so where we can find the error messages in oracle enterprise manager 10g grid control to make sure that it should not happen in future.Refer Link below:
http://www.oracle.com/technology/pub/articles/havewala-rman-grid.html
Check from point 15
Regards,
X A H E E R

Trace dumps when performing RMAN backups

Hi,
10g release 2
I'm not very experinced with oracle 10g, but on 9i I've never seen this before:
Every time i do a RMAN backup errors is written in the alert log pointing to the instances' trace file in the udump dir.
*** ACTION NAME:(0000018 STARTED16) 2006-09-01 12:07:50.993
*** MODULE NAME:(backup full datafile) 2006-09-01 12:07:50.993
*** SERVICE NAME:(instance_name) 2006-09-01 12:07:50.993
*** SESSION ID:(140.2064) 2006-09-01 12:07:50.993
*** ACTION NAME:(0000022 STARTED111) 2006-09-01 12:07:52.098
*** 2006-09-01 12:09:56.409
*** ACTION NAME:(0000094 STARTED111) 2006-09-01 12:09:56.409
*** MODULE NAME:(backup archivelog) 2006-09-01 12:09:56.409
*** 2006-09-01 12:14:22.122
*** ACTION NAME:(0000117 STARTED16) 2006-09-01 12:14:22.122
*** MODULE NAME:(backup full datafile) 2006-09-01 12:14:22.122
*** ACTION NAME:(0000121 STARTED111) 2006-09-01 12:14:23.238
to me it looks only informational, but i was wondering if anyone been experiencing similar behavior before, and if there are a way to avoid this? or is this an error i should take action on.
any ideas would be very much appricated!

This is a known bug # 4596065 with RMAN when controlfile autobackup is on and flash recovery area is enabled. Workaround is to ignore the trce files.

I am getting below error while taking RMAN backup.

Friends,
I am getting below error while taking RMAN backup.
The issue is related with a lock while trying to backup the controlfile.
The lock is more likely caused by the autobackup controlfile process started just before RMAN process was also trying the backup controlfile as shown in the following alert.log excerpt.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Is there anyway to solve this issue?Thanks in advance.

Hi,
SQL> SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
FROM v$session s, v$enqueue_lock l
WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2; 2 3
no rows selected
Oracle version : 10.2.0.3
I am getting this error once in a month not everyday.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Please suggest me based on this..Thanks in advance..

Error , ORA-19809 & ORA-19804 While restoring RMAN backup .

Hi Experts,
I am restoring production RMAN backup to UAT . Using below steps
1)rman target=/
2)RMAN> startup nomount;
3) RMAN> restore controlfile from '/orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl';
Starting restore at 05-AUG-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=3 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATA_ACME/acme/controlfile/current.256.724845209
output file name=+DATA_ACME/acme/controlfile/current.257.724845209
Finished restore at 05-AUG-10
4) RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
5) RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME1/current/%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
new RMAN configuration parameters are successfully stored
6) RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
7) RMAN> CATALOG START WITH '/orabkdump/Rman_Bak/ACME';
searching for all files that match the pattern /orabkdump/Rman_Bak/ACME
List of Files Unknown to the Database
=====================================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
List of Files Which Where Not Cataloged
=======================================
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
RMAN-07517: Reason: The file header is corrupted
8) RMAN> run {
2> set until sequence 1789 thread 2;
3> restore database;
4> recover database;
5> sql 'alter database open resetlogs';
6> }
executing command: SET until clause
Starting restore at 06-AUG-10
using channel ORA_DISK_1
Finished restore at 06-AUG-10
Starting recover at 06-AUG-10
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2803
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=6051
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2804
channel ORA_DISK_1: reading from backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/06/2010 23:10:38
ORA-19870: error while restoring backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 49283072 bytes disk space from 5218762752 limit
** My UAT database should be in noarchival mode . Generally such errors have been observed during backup , but have no clue why they occurred during recovery .Please advice .
Thanks
Edited by: user11981514 on Aug 6, 2010 9:46 AM

Hi,
Since the error ORA-19809 indicates the lack of space in flash recovery area during the media recovery, I suggested increasing the value of the parameter DB_RECOVERY_FILE_DEST_SIZE.
Yes, during the media recovery the RMAN will restore the archived log to the default destination (only if the required archived logs are not already on the disks).You can confirm the restore location of the archived log in RMAN restore log/destination specified by parameters log_archive_dest_1/db_recovery_file_dest.
Regards,
Vaibhav

RMAN-20260 error while trying to delete a backup piece

Hello,
In my company we use Oracle 10g, backup managed by RMAN and integrated with TSM.
In order to remove the old backup files, there is a delete script to do this.
Basically this script:
connect to RMAN catalog
allocate channel for maintenance device type 'sbt_tape'
change backuppiece <file names from rc_backup_piece older than 35 days> delete;
When this command is run, this error is being generated:
RMAN-03002: failure of delete command at 01/18/2010 17:14:00
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20260: backup piece not found in the recovery catalog
RMAN-06092: error while looking up backup piece
Any ideas?
Thanks in advance.
Fer

Hy Tycho,
Yes, it's a tape backup.
This is the channel used to take the backup:
allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/opt/tsm..../...opt)';
I tried this rman command with a file name that is 35 days older in rc_backup_piece:
list backuppiece <file name>;
I received this error:
RMAN-20260: backup piece not found in the recovery catalog;
How can this file be in the rc_backup_piece and not appear in the list backuppiece ?
Thanks a lot.
Fer

EBS R11i Rman DB backup error

Hi Friends,
platform AIX 5L
I am backing up my EBS R11i database using RMAN but I got error.
$ rman target /
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: TEST (DBID=1969797320)
RMAN> backup database;
Starting backup at 10-DEC-08
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=39 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/10/2008 15:17:06
ORA-00600: internal error code, arguments: [525], [0x70000001137DD50], [5], [library cache], [5], [0x700000000025BF0], [device information], []
ORA-27041: unable to open file
IBM AIX RISC System/6000 Error: 25: Not a typewriter
Additional information: 16
RMAN> exit
What file is RMAN opening here > ORA-27041: unable to open file
Thanks a lot

Please refer to Note: 262997.1 - ORA-600 [525] / [510] and ORA-27041 When Running RMAN Backup On IBM AIX Platform
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=262997.1

Rman backup errors..

Similar Messages

Maybe you are looking for