RMAN backup fails using OEM with no output error

I am trying to do a weekly automatic full backup of a database in noarchivelog mode using RMAN in Enterprise Manager. Every time I submit the backup job (even if I try to do an immediate backup) the job fails almost immediately. When I Iook at the job output for the failed attempt, it says that there is no output for the job. I believe I have all of the preferred credentials and priveleges correct. Does anyone have any ideas as to what the problem could be or maybe where I can find an error log for rman to get a better explanation of the error?
Thanks

please check in metalink.....
you find useful informations here:
RMAN backup using Oracle Secure Backup fails with ORA-19511 (sbt__rpc_connect)
Doc ID: Note:396046.1
Best Regards,
Shishir Tekade.
My Blog: http://shishirtekade.blogspot.com

Similar Messages

Backup Failure using OEM

Backup Failure using OEM
I have oracle 9i (windows 2000 server)
I tried to make a fullbackup using OEM, it gives me NO error messages
I got result file with 890 MB (my Db is not huge),
but when I go back to the JOBs in OEM I found the status of the job FAILED
I tried to do the same thing using incremental backup level 0, but I got the same result
any Idea why the job didn't complete successfully
thanx in advance

Use command line -> rman .

Backup Failure using OEM (Oracle 9i)

Backup Failure using OEM
I have oracle 9i (windows 2000 server)
I tried to make a fullbackup using OEM, it gives me NO error messages
I got result file with 890 MB (my Db is not huge),
but when I go back to the JOBs in OEM I found the status of the job FAILED
I tried to do the same thing using incremental backup level 0, but I got the same result
any Idea why the job didn't complete successfully
thanx in advance

Here is the deal.
I need to be able to work in the OEM for my class. (Oracle DBA in Training) It is a significant part of my grade to be able to find the required help through forums like these to help me get the backup/recovery process to work through the OEM. My books deal with the OEM in a Win2000 Pro/Server environment, and don't take into consideration the variances in XP Pro. My install works great, other than I am receiving a "Fail" on my OEM Backups under Jobs. It further explains that I do not have the proper permissions to perform the backup job that was created. My instructor is completely hands off when it comes to help. So if anyone has run into this problem and been successful in fixing the problem without using a different utility. Please let me know.
Thanks in advance,
Vic

RMAN Backup Failed.

Hi Gurus,
My RMAN backup failed with below error.Please suggest.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 01/26/2013 22:48:56
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current
ORA-00258: manual archiving in NOARCHIVELOG mode must identify log
RMAN>
Recovery Manager complete.
Thanks,

The message indicates that your database is in NOARCHIVELOG mode. You cannot make an RMAN Backup of a database that is OPEN if it is in NOARCHIVELOG mode.
You have two options
1. Make consistent RMAN Backups with the database only in MOUNT mode (SHUTDOWN ; STARTUP MOUNT)
OR
2. Configure for ArchiveLogs (create a target filesystem or FRA), set the database to ARCHIVELOG mode, monitor the volume of ArchiveLog generation, configure both Database and ArchiveLog backups.
Hemant K Chitale

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

RMAN backup testing using networker and NMO

I want to do some RMAN backup testing using networker 7.5 and NMO 5.0. I am doing these testing on VMware. I am not sure whether I need to buy some tape drive for my home PC to do backup testing or I can mimic hard drive as tape drive in VMWARE.
Do you have any idea? any suggestion please?
Thanks..

I think this is not a RMAN/Oracle issue, as soon as you configure networker MML it's up to networker to define the real backup destination behind. Maybe networker has also a 'fake' tape destination,but I don't know this. There's a networker forum:
http://www.tek-tips.com/threadminder.cfm?pid=480
Werner

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

Session "UpdateUx" failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session "UpdateUx" failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:\sources\Install.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035

Windows Server 2008 R2 Standard.
I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.
Sourece: Kernel-EventTracing
EventID: 2
Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035
- System
- Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID 2
Version 0
Level 2
Task 2
Opcode 12
Keywords 0x8000000000000010
- TimeCreated
[ SystemTime] 2010-12-01T11:17:19.937490400Z
EventRecordID 17
Correlation
- Execution
[ ProcessID] 3472
[ ThreadID] 3100
Channel Microsoft-Windows-Kernel-EventTracing/Admin
Computer LODGER.aqa.com.ru
- Security
[ UserID] S-1-5-21-1644491937-706699826-1417001333-3605
- EventData
SessionName WbadminUIInBuiltTracing
FileName
ErrorCode 3221225525
LoggingMode 2
What causes the error? What do I need to do to avoid it?

I have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released?

Error event id 2 - Kernel Event Tracing - Session "" failed to start with the following error: 0xC000000D

I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          24/12/2009 09:08:20
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
    <EventRecordID>36</EventRecordID>
    <Correlation />
    <Execution ProcessID="1944" ThreadID="1948" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>George-XXL</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">
    </Data>
    <Data Name="FileName">
    </Data>
    <Data Name="ErrorCode">3221225485</Data>
    <Data Name="LoggingMode">5</Data>
</EventData>
</Event>

Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong!

Quick Time (Audio Preferences) fails to launch with buffer overrun error

It all started a few weeks ago, after installing itunes7.0 for windows, and itunes began to annoy me (indeed drive me mad) with an error message :
"an unhandled win32 exception has occured in itunes.exe [3840]" at startup / closing immediately afterwards.
After numerous uninstall/reinstall/clean the registry/system restore attempts I managed to solve the issue-- BUT only for a few days..It failed again and so I went through the itunes support forums even found an entry
"iTunes 7 for Windows: iTunes fails to launch with an unknown error"
which suggests that my issue could be solved by :
"Open the QuickTime control panel and select the Audio tab.
In the Devices section de-select the Safe mode (waveOut only) option and click Apply."
But to my surprise, when i selected the Audio tab (and the Audio tab ONLY ) it presented me a "buffer overrun error" which indicated that the internal state of the program has been corrupt and it would be shutting down now..
It's such a nuisance..!!
Please, help, and your help will be deeply appreciated... !
I have tried to revert to the older version and it didn't work..

let's try swapping out your existing QuickTime one more time. we'll take a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

I'm getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="4816" ThreadID="2800" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID="****" />
</System>
<EventData>
<Data Name="SessionName">WbadminInBuiltTracing</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I'm running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it's just my opinion....I could be wrong!

RMAN backup failes with ORA-19624 occurred during call to DBMS_BACKUP_RESTO

RMAN backup up failes with following errors. It works some times and then failes. When it failes then if i un install and reinstall Oralec agent and Backup cliet then it start working OK for few days and then again start getting error. See the messages below...
Recovery Manager: Release 8.1.7.0.0 - Production
RMAN-06005: connected to target database: MIMSDEVH (DBID=3525230908)
RMAN-06008: connected to recovery catalog database
RMAN> RUN { 2> execute script tapelevel0; 3> }
RMAN-03021: executing script: tapelevel0
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03015: error occurred in stored script tapelevel0
RMAN-03007: retryable error occurred during execution of command: allocate
RMAN-07004: unhandled exception during command execution on channel ch00
RMAN-10035: exception raised in RPC: ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-19557: device error, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
ORA-19511: SBT error = 4110, errno = 0, BACKUP_DIR environment variable is not set
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE
Send me some solution...

hi,
what is your backup script
can you post back the result of the command
show all;
from the rman command prompt
regards
Alan

RMAN backup fails using OEM with no output error

Similar Messages

Maybe you are looking for