RMAN backup got failed with the error ORA-19566

Hi,
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not help since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that helps. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
Please help me out to get this fixed.

Here it is:
SQL> Select * from v$database_block_corruption ;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTION_TYPE
13 3988352 128 0 ALL ZERO

Similar Messages

RMAN backup restore leads to the error "ORA-00600: internal error code, arguments: [kccsbck_first], [2], [2349545192]" on DB startup

Hi All,
DB:11.2.0.3.0
OS: Sun Solaris SPARC 64 bits
I am facing an issue - RMAN backup restore leads to the error "ORA-00600: internal error code, arguments: , , " on DB startup. Restored from RMAN backup DB test2 to DB test1.
 $ sqlplus / as sysdba
 SQL*Plus: Release 11.2.0.3.0 Production on Sun Oct 6 09:31:28 2013
 Copyright (c) 1982, 2011, Oracle. All rights reserved.
 Connected to an idle instance.

SQL> startup
ORACLE instance started.
Total System Global Area 4277059584 bytes
Fixed Size 2166160 bytes
Variable Size 1493176944 bytes
Database Buffers 2768240640 bytes
Redo Buffers 13475840 bytes
ORA-00600: internal error code, arguments: , , ,
SQL> exit
DB test2 database validated:
RMAN> validate Database;
No issues reported.
Could anyone please let me the what's the cause of this error
Thanks for your time
Regards,
user10088255

HI,
CASE : I
C:\>set ORACLE_SID=xxxx
C:\>sqlplus sys/XXXXX@rosen as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:28:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [1], [3978145973],
Solution: AFTER GETTING ORA-00600, SHUT THE DATABASE AND STARTUP IT INTO MOUNT STAGE AND THEN ALTER DATABASE TO OPEN STAGE .
SQL> shut immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
Database mounted.
SQL> alter database open;
Database altered.
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ROSEN READ WRITE
CASE :: II
C:\>sqlplus sys/XXXX@royalton as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:37:37 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 1979714112 bytes
Database Buffers 1426063360 bytes
Redo Buffers 16007168 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [1], [73515151],[], [], [], [], [], [], [], [], []
Solution : As in above case, I have started the database in mount and then alter it to the open mode but it doesnot work out. After some analysis ,troubleshooting and googling, we have decided to flush the shared pool component of the SGA . So, we have started the database in mount stage and then flush the shared pool and further alter it to open stage . Below are the steps performed to solve this issue .
SQL> shut immediate
ORA-01507: database not mounted
ORACLE instance shut down.
C:\>set ORACLE_SID= royalton
C:\>sqlplus sys/xxxxxxxx@royalton as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:28:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
Database mounted.
SQL> alter system flush shared_pool;
SQL> alter database open
Database altered.
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ROYALTON READ WRITE
Conclusion : Though this is not the solution but a workaround to solve ORA-00600 which is having same argument as above, then you may follow the above steps.
Please chek this link : One Can Succeed at Almost Anything For Which He Has Enthusiasm...: ORA-00600: internal error code, arguments: [kccsbck_f…

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
pe

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

Partition failed with the error: No space left on device

I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

Disk Utility _ Disk Erase failed with the error

I have a 1GB Kingmax USB Stick which I am trying to erase or restore. I used in a PC at uni and it no longer works. When I try to erase or restore with Disk Utility I get an error message 'Disk Erase failed with the error:
Input/output error'
I have tried also with Windows, but to no avail. The System Profiler recognises the USB stick.
Any ideas?
Cheers!
iMac G5, iBook G3 Mac OS X (10.4.8)

Shutdown the computer and remove the USB drive.

Help!! "Volume erase failed with the error"

I have no idea what to do ! My computer was running a bit slow and I wanted to get rid of any unwanted apps and files, so I backed up the files that I did want on an external drive. I then erased everything on my HD. Then I restarted it and attempted to reinstall the old apps from the cd that came with my computer but I couldn't. It takes me to the Utility Dock every time I restart it and when I try to install Lion back on, I can't click on the HD and it says it's 'locked'. When I try to reset it again or do anything at all it gives me a "Volume erase failed with the error" message. I can't do anything! Can anyone help???

Replace the hard drive.
If it can't be erased, that usually means something is seriously wrong with it.

P2V Failed with the Error : "Connection closed at byte 11086778368. Giving"

hi,
P2v gets failed with the error: Connection closed at byte 11086778368. Giving up
i checked the p2v log from /tmp/
10826600K .......... .......... .......... .......... .......... 12% 18.5M 60m9s
10826650K .......... .......... .......... .......... .......... 12% 22.0M 60m9s
10826700K .......... .......... .......... .......... .......... 12% 22.1M 60m9s
10826750K .......... .......... .......... .......... .......... 12% 21.5M 60m9s
10826800K .......... .......... .......... .......... .......... 12% 4.69K 61m26s
10826850K .......... .......... .......... .......... .......... 12% 15.7M 61m26s
10826900K .......... .......... .......... .. 12% 1.50K=8m52s
13:29:53 (19.9 MB/s) - Connection closed at byte 11086778368. Giving up
please suggest if anybody had come across with problem....

Raja Kondar wrote:
P2v gets failed with the error: Connection closed at byte 11086778368. Giving upDo you have enough drive space on the target server? You'll need at least 3x as much drive space as is available on the physical box you're converting. For example, if your physical server has a 72GB disk, you'll need ~200GB of free disk space on the Oracle VM Server.

Partition failed with the error: The target Core Storage volume is locked

partition failed with the error: The target Core Storage volume is locked
Hello everybody!
Please help me.
I'm using MacBook Pro (Retina, 13-inch, Mid 2014), Processer:2.6 GHz Intel Core i5, Memory: 8 GB 1600 MHz DDR3.
my computer i have divided in 3 drives: 1-Machintosh HD (Mac OS) 2-Bootcamp (Window OS) & 3-Data (drive for data storage).
I don't want to use Window OS on my computer anymore so I decided to delete drive Data (the third drive) & Window OS (the second drive).
I want my hard drive become a single drive back but when I was formatting, there were some problem display:
then i clicked ok and it displayed like this:
then i try to format or create new partition, it's nothing happen when press button apply.
my computer has storage space 256GB but now when it is happened like this my storage space is only 127GB only.
so please help me.. what so I do with this problem.
Thank you.!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

RMAN backup got failed with the error ORA-19566

Similar Messages

Maybe you are looking for