RMAN compatibility between AIX and RHL
Hi,
I have a 1 TB 10gR2 database running on AIX 5.3. Can I take an RMAN backup of it and restore it in RedHat Linux ES 5?
If it is not compatible, do I have any other options apart from the normal export/import?
Thanks in advance,
Karthik
Hi Karthik,
You can query the following table to see platforms to which rman can convert your AIX 5.3 database to.
select * from V$DB_TRANSPORTABLE_PLATFORM;You have to run a different type of rman backup please check the documentation via this link.
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/dbxptrn.htm#CHDCFFDIRgds,
Tycho
Similar Messages
-
I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.
iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host. -
Differences between AIX and Windows for SAP
Dear All,
I have a problem regarding SAP Software.We want to change our company software .First we order SAP On Windows with Oracle10g But Now We want SAP on AIX with Oracle10g.
SAP delivered us software on Windows platform.
Please Suggest me for this as what are the differences between the above two platforms and what are the differences between the above 2 platforms.
Regards,
Pankaj Kalsayanhi Pankaj,
well, this is a very general question. perhaps you could specify a little more.
in general i would see no difference regarding the end user sitting in front of his pc using sapgui.
as far as i know all server side sap software is available for aix and windows (and many more).
for administration on the other hand there is of course lots of difference. AIX is a UNIX operating system running on special hardware with power processors. it offers quit extensive virtualisation abilities using so called LPARs and supports real big number of CPUs and large RAM. Windows is a completly differnet operating system running mostly on x86/amd64 hardware.
therefore you should also consider what know-how is available in your system administration.
not shure if that is partly answering your question ...
btw. if you are going forward with AIX you should perhaps consider switching oracle with db2. so you have a consistent IBM based landscape. also to me, sap and db2 seem to "like" each other more than sap and oracle
regards,
martin -
Battery compatibility between X31s and X61s
Hi!
I own a X31s and X61s, and would like have a spare battery handy for travel. Before placing the order, I am wondering if the following battery can be used on both:
* ThinkPad X60s Series 4 Cell Slim Line Battery
It is not cheap, so I would like to think twice before buying. Somehow I cannot find any information on the compatibility issue. Thank you for your help!
Jennyjennyumaa, welcome to the forum,
unfortunately the batteries are definitely not interchangeable between X31 and X61 systems.
Sorry
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Compatability between LaCie and other drives
Greetings Kind MacAddicts!
I have a 160GB LaCie (Triple Threat?) FW800 external drive and have had no problems. Now I want to expand and daisychain another external drive. Thinking of a Maxtor with FW800 (more bang for the buck) and wondering if there are any known compatability issues between LaCie and Maxtor, or btw Maxtor and the new Intel processors. Suggestions?Well that drive inside the LaCie casing could very well be a Maxtor drive too :P
Remember LaCie don't actually make Hard Drives, they just put drives from other manufacturers in their external casings and charge a premium.
Yes, some of their designs look nice -
Compatibility between Yosemite and Photoshop / Bridge CS5.
I am concerned about the possibility of incompatibility between Yosemite and Photoshop / Bridge CS5 so have delayed updating my Mac. Has anyone updated, experienced problems and found solutions? What does Adobe have to say in this regard?
I'm not sure I know enough to answer the question.
The images are on my G5 on a second internal hard drive (not the boot drive).
They are in a folder with a lot of images from the same shoot.
That folder shows up in the Library in Aperture, also. I think I imported them. But, as best I can tell, they do not "only exist in Aperture" because I can see them, and their .xmp files in the original file on the second internal hard drive.
Thank you so much for trying to help.
sjh -
Issue with VPN compatibility between 2811 and 2911
hello
I would like to ask anyone have had any issues with setting up a VPN tunnel between 2811 and 2911?
The IPSec VPN is established but for some reason I cannot ping the LAN side to the other LAN side of the other end of the VPN Router?
Any experience would be much appreciated
ThanksIPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology. -
USB Flash Drive Compatibility between Mac and PC?
Hi,
I own an iMac 2 GHz Intel Core 2 Duo 1 GB 667 MHz DDR2 SDRAM and just got a new job where I'm using a PC. At work they all use flash drives to transfer data back and forth to computers etc. Would a flash drive (let's say a Kensington since that's the brand I've seen the most at work) that works in a PC at work be compatible with my iMac at home. I know Kensington makes them compatible for Mac and PC but just wondering how the data would transfer onto my Mac. Is it readable, does it depend what I'm transferring over?
Message was edited by: spiralgirl{quote} guy there said they haven't yet perfected the flash drives to switch between Mac and PC and work well so I was a little surprised at this. {quote}
That is pretty much a standard reply you get from someone that doesn't know anything about macs. I've used those things for years without any problems, but I have been using my ipod as a disk lately because I always have it with me. It's also another less thing I have to buy and carry around. -
Compatibility between CF7 and CF10
Hi
We currently have two load-balanced servers running CF7 Enterprise Edition. The applications use the Client Variable store, so that we can move users between servers as necessary (should one become busy / unavailable).
We now want to add a third server into the cluster. This will have to be CF10 Enterprise Edition.
Does anyone know if the Client Variable store operates in the same way, or am I likely to have problems if I try and add this to the cluster? Also, can anyone point me in the direction of looking at which CF tags (or tag attributes) have been deprecated between 7 and 10?
Thanks
KarlI don't think you will find a list of differences between CF 7 and CF 10 from Adobe. Maybe someone out there has compiled a list???? More likely you will need to read the release notes from each version and determine that way.
ColdFusion release notes - http://www.adobe.com/support/documentation/en/coldfusion/releasenotes.html -
File compatibility between cs3 and cs5
Hi,
What are the compatilibity issues between Photoshop CS3 and CS5? Can they be used together without much (if any) issues?
Thanks.They can happily coexist on the same system, as long as you've got the disk space. Photoshop has always been like that.
You'll only be able to run one at a time, at any given instant, though.
Regarding file compatibility, I don't how much it's required to open a file in Photoshop CS3, but the newer version does offer a "Maximize Compatibility" preference setting for saving .psd files. On occasion I've opened .psd files in Photoshop CS3 saved by CS5 (using the aforementioned setting) and I haven't seen any issues at all.
-Noel -
Dataguard 11g setup between AIX and Linux
Hi,
We are planning to move our Oracle databases from AIX 6.1 to Oracle Linux 6.2
To reduce the downtime, we are thinking of setting up a dataguard (physical or logical) and do the switchover.
Have you performed this before?
Will you pls send me the steps?
Thanks,
DRHello again;
I thinking no for the same reason.
When my shop moved from AIX to Linux we just install Oracle on Linux and patched it to the same level as the AIX. We created users, tablespaces, job etc in advance and then just used import/export to move the needed schema's. Data Pump make this much easier.
Do a schema(s) compare and switch when ready. But in any event I don't believe Data Guard can help you. You mostly have a migrate issue.
Please consider closing your question when complete.
h3. Oracle Database 10g & Multi-Terabyte Database Migration
http://www.oracle.com/technetwork/database/features/availability/thehartfordprofile-xtts-133180.pdf
h3. Incrementally Updating Transportable Tablespaces using RMAN
http://www.oracle.com/technetwork/database/features/availability/itts-130873.pdf
h3. Platform Migration Using Transportable Database Oracle Database 11g and 10g Release 2
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10gr2-platformmigrationtdb-131164.pdf
Best Regards
mseberg
Edited by: mseberg on Nov 13, 2012 6:31 PM -
Connection between AIX and NT based Oracle
Hi There,
I am encountering the following errors while connecting between two Oracle 8.1.5 databases i.e AIX to Windows NT 4 service pack 4 (Note. Windows NT has got Personal Oracle 8.1.5) :
1. TNS-3505 error is coming while try to connect from AIX to NT.
2. ORA-12514 and ORA-12154 while trying to connect from NT to AIX. Mind it, setting up the TNSNAMES on NT didnt give any problem.
Is there any one out there to help me out.
Thanks in Advance
KVSYou can make ODBC calls directly in C or you can use a variety of higher-level API's (RDO, DAO, ADO, etc.).
Justin -
Compatibility between CS3 and earlier versions?
As the web developer I have Contribute version 3, but some of
my new clients
will be buying the latest Contribute CS3 to update their site
pages. Can I
still set up their roles and editing rights for a site and
create a
connection key to send to them that will work for them in
Contribute CS3
without difficulty? And can either of us still edit the site
pages,
regardless of the fact that we are each using different
versions of
Contribute?
In conclusion, are there any backward compatibility issues I
should be aware
of between the newer version and older versions of CS3 when
administering,
and connecting to, the same website?
Thanks in advance.
(Please reply to forum. E-mail address is bogus to prevent
spam)Thanks for the advice.
"ThinkInk" <[email protected]> wrote in
message
news:f0sa43$dvh$[email protected]..
>I had the same problem when C4 arrived and I could'nt
purchase C3 for my
> clients.
>
> The key is to use Transitional Mode (adminstrator
settings,
> compatibility),
> here's wat the HELP says:
>
> --------------------------
> Enabling compatibility with older versions of Contribute
> Contribute 4 offers administrators two compatibility
options--one that
> allows
> users with earlier versions to work on the website, and
one that does not:
>
> Transition Mode
> In this mode, users of earlier versions of Contribute
can continue working
> on
> the website, along with Contribute 4 users. This lets
you evaluate the new
> version and set up new roles and permissions without
disrupting users with
> earlier versions of Contribute.
>
> Compatibility Mode
> In this mode, all users must use Contribute 4. Users
with earlier versions
> cannot work on the website.
>
> Contribute 4 starts in Transition mode by default when
you migrate from
> Contribute 3. Use this mode temporarily; when you?re
ready, transition all
> users to Contribute 4 and enable Compatibility Mode.
>
> To enable Compatibility Mode:
> In Contribute 4, select Edit > Administer Websites,
and then select a
> website.
> The Administer Website dialog box appears.
>
> Select Compatibility from the category list on the left.
> The Compatibility options appear in the Administer
Website dialog box.
>
> Select Compatibility, and then click Close.
> After you enable Compatibility Mode, all users connected
to the website
> must
> use Contribute 4.
>
> ------------------------
>
> It's really better to upgrade yourself to the newest
version, so you know
> what
> extra options your clients have and you can support
them. I managed to get
> both
> C3 en C4(I purchased the upgrade) running on my PC, so
maybe that's also
> an
> option.
>
> grtz. Hayo
> -
Backwards compatibility between DWCS3 and DW8
I am purchasing the CS3 Web premium and plan to only install
in on the new desktop I will purchase. Most of my design work will
be done on that system but I will occasionally need to work on
files when traveling on my laptop which will only have DW8 (not
upgrading that system just yet). Will there be any compatibility
issues in working on the same file between both versions, or am I
stuck only working on the desktop?
DaraI don't see any problem with compatibility if they are static
pages and you
haven't used any of the newer features from CS3 like Spry for
example.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"Dara_BSI" <[email protected]> wrote in
message
news:f3o93g$ert$[email protected]..
>I am purchasing the CS3 Web premium and plan to only
install in on the new
> desktop I will purchase. Most of my design work will be
done on that
> system but
> I will occasionally need to work on files when traveling
on my laptop
> which
> will only have DW8 (not upgrading that system just yet).
Will there be any
> compatibility issues in working on the same file between
both versions, or
> am I
> stuck only working on the desktop?
>
> Dara
> -
Compatibility between 1131AG and 1420
Are there compatibility issues between a AIR-AP1131AG-A-K9 and 1420 series Lwapp, with b/g and a dipole antennas? I've read they are incompatible. Is there any documentation on the Cisco site that addresses this?
If you are talking about using the external antenna of the 1420 for the 1131, there sure is. The 1130 series AP has INTERNAL antenna.
Maybe you are looking for
-
Have installed Muse via CC - payed for it, but doesn't work
Hi, In the very beginning I tried Muse via trialperiod. Then payed for it. Now I have payed for another year-submisson from yesterday with a new adobe account. Have downloaded muse via cc, but when opening the program it says my trial period is over.
-
when i try to do back with iCloud it always says The last backup could not be completed. Please help me with this issue
-
Triggering the Payables Approval Process PL/SQL
Hi Pls let me know how to trigger the payables approval process from the PL/SQL. I have a conc program which interface the legacy data into payables, i am calling the payables open interface from the conc program . Once the invoices are validated i n
-
Jump drive vs. disk image for secure data, which is better?
I want to store all my financial files somewhere securely....encrypted and password protected. It seems my choices are either a jump drive or disk image. If I use the disk image on my Pro, I'll have to be able to back it up to an external drive for s
-
XI Adapter inbound (Configuration)
Hi, I have followed the steps given here: http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm But i am unable to post a message to the backend system via an inbound ABAP proxy. Can you please let me know what