RMAN DUPLICATE ERROR

I was executing RMAN DUPLICATE and received this error?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/08/2007 13:41:22
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01078: failure in processing system parameters
RMAN-04017: startup error description: LRM-00109: could not open parameter file
'/u01/app/oracle/product/10.2.0/dbs/initDPDEVUG.ora'
Anybody knows how to fix this error?

I had this file only in CLONED databae $ORACLE_HOME/dbs. I copy this file into SOURCE database $ORACLE_HOME/dbs. Since duplicate initiation going from SOURCE to CLONED. May this is problem?
I am going to re start Clone process and let you know if this was the case

Similar Messages

  • RMAN duplicate errors

    Hi:
    I was doing a 11g database clone on linux using rman duplicate. After runing 40min, it stopped and got the following errors. All the file permission are the same 777, one third of files have been copied.
    ORA-27041: unable to open file
    Linux-x86_64 Error: 13: Permission denied
    Additional information: 9
    failover to previous backup
    released channel: aux1
    released channel: aux2
    released channel: aux3
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 05/30/2012 08:28:07
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-20506: no backup of archived log found
    RMAN-06053: unable to perform media recovery because of missing log
    RMAN-06025: no backup of archived log for thread 1 with sequence 12312 and starting SCN of 23167256063 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 12311 and starting SCN of 23167250994 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 12310 and starting SCN of 23167245674 found to restore
    Thanks and regards.

    Files from source database:
    -rwxrwSrwx 1 root root 48653824 May 29 20:57 db_t784587134_s1208_p1
    -rwxrwSrwx 1 root root 48594944 May 29 20:57 db_t784587149_s1209_p1
    -rwxrwSrwx 1 root root 7761920 May 29 20:57 db_t784587150_s1210_p1
    -rwxrwSrwx 1 root root 4062945280 May 29 21:23 db_t784587170_s1211_p1
    -rwxrwSrwx 1 root root 1124147200 May 29 21:07 db_t784587170_s1212_p1
    -rwxrwSrwx 1 root root 2049015808 May 29 21:16 db_t784587725_s1213_p1
    -rwxrwSrwx 1 root root 4012630016 May 29 21:36 db_t784588310_s1214_p1
    -rwxrwSrwx 1 root root 4620419072 May 29 21:43 db_t784588726_s1215_p1
    -rwxrwSrwx 1 root root 3724255232 May 29 21:52 db_t784589461_s1216_p1
    -rwxrwSrwx 1 root root 1818624 May 29 21:43 db_t784589896_s1217_p1
    -rwxrwSrwx 1 root root 2071040 May 29 21:52 db_t784590427_s1218_p1
    There are about 30 dbf files on source database, 10 dbf files on target database now.

  • RMAN Duplicate Error - URGENT

    Hi Gurus.
    I have a primary database (RAC 2 nodes with ASM HP-UX 10g R2) and I need to duplicate this database to another machine (Linux single node 10g R2).
    When I execute the duplicate command in RMAN I received the follow error:
    channel ORA_AUX_DISK_1: reading from backup piece /backup/PAZ_database_5787_1.bak
    ORA-19870: error reading backup piece /backup/PAZ_database_5787_1.bak
    ORA-19505: failed to identify file "/backup/PAZ_database_5787_1.bak"
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    failover to previous backup
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 04/29/2008 13:02:55
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    Somebody know what´s happening?
    Thanks

    Hi.
    The command "List Backup of database" is OK and list
    the last backup.
    If I can´t to do a duplicate with different
    plataforms, what can I do?
    Thanks in advanced.Like said, use Transportable Tablespace, check Oracle doc,
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#sthref73

  • RMAN duplicate target database error

    Hello,
    I’m trying to use RMAN ‘duplicate target from active database’ to a remote host however I’m getting a confusing error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 11/19/2009 13:47:23
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on aux13 channel at 11/19/2009 13:47:23
    ORA-19504: failed to create file "+DATA2"
    RMAN-03009: failure of backup command on aux14 channel at 11/19/2009 13:47:23
    ORA-19504: failed to create file "+DATA2"
    Here’s my script:
    connect target sys/<password>@node1;
    connect auxiliary sys/<password>@node2;
    spool log to '/u01/app/oracle/dba/duplicate111909.log'
    run
    allocate auxiliary channel aux11 device type disk;
    allocate auxiliary channel aux12 device type disk;
    allocate channel aux13 device type disk;
    allocate channel aux14 device type disk;
    duplicate target database to node2 from active database DB_FILE_NAME_CONVERT='+DATA1','+DATA2';
    release channel aux14;
    release channel aux13;
    release channel aux12;
    release channel aux11;
    spool log off;
    exit;
    Node1 uses ASM disk group DATA1 and I intend to use ASM disk group DATA2 on node2. Has anyone seen this error before? I have tried various permutations of DB_FILE_NAME_CONVERT clauses but all error with ORA-19504. On a side note I was able to use ASMCMD cp command to copy a datafile from node1 DATA1 to node 2 DATA2. Also, if I use disk group DATA1 on node 2 then the RMAN duplicate command runs successfully, it only errors when using DATA2. And yes +DATA2 is mounted on node2:
    SQL> select name, state from v$asm_diskgroup;
    NAME STATE
    DATA1 MOUNTED
    DATA2 MOUNTED
    Any and all ideas are welcome. I’m running out of things to check.
    Thanks,
    RJL

    For a duplicate you don't need to give the DB_FILE_NAME_CONVERT especially if you go from a asm to asm diskgroup.
    The place where it'll put all the files will be automatically done taking care of the init.ora file parameter db_create_file_dest, (db_create_online_log_dest_1)

  • RMAN-00600 Error during Duplicate

    RDBMS Version: 8.1.6
    Operating System and Version: NT 4.0
    Error Number (if applicable): RMAN-00600
    Product: Recovery Manager
    Product Version: 8.1.6
    RMAN Duplicate Database Error (RMAN-00600)
    While running the following command:
    run {
    allocate auxiliary channel ch1 type disk;
    allocate auxiliary channel ch2 type disk;
    duplicate target database to db1backup nofilenamecheck;
    I get the following errors:
    RMAN-03022: compiling command: Duplicate Db
    RMAN-00571: =========================================================
    RMAN-00569: ================ ERROR MESSAGE STACK FOLLOWS ============
    RMAN-00571: =========================================================
    RMAN-00601: fatal error in recovery manager
    RMAN-03012: fatal error during compilation of command
    RMAN-03028: fatal error code: 600
    RMAN-03013: command type: Duplicate Db
    RMAN-00600: internal error, arguments [14036] [-11] [29] [
    CHARACTER SET %s
    ] [WE8ISO8859P1]
    Any ideas as to what may be causing this? I have successfully backed up the target database, the connections to the target and auxiliary databases are fine, and I'm using a controlfile vs. a catalog.
    Mike McAndrew
    [email protected]
    null

    Hi
    Duplicate databases with RMAN is not as simple as it seems, look at message colled "Duplicate database error with RMAN"
    This maybe could help you.
    Anyway, I saw the message:
    "internal error, arguments [14036] [-11] [29] [CHARACTER SET %s] [WE8ISO8859P1] "
    What NLS configuration have you?
    A10!
    null

  • RMAN duplicate target using set until telling me it can not find data files

    I have RMAN scripts that I use freqently to clone a database from DB (production) to another (non-prod). These work just fine. I use the set until so that I can tell it at what point I want the new DB to be created from the backups of the source.
    I had a request to go back a few weeks and the backup files (I do compressed backups to disk) were on tape. I had my backup person restore my backup directory for the source DB as it looked on a certain day (May 28). I have an 8 day retention policy and so the backup files that were restored showed files all the way back to 5/20 ( includes the point I want to use in my set until clause).
    However, whenever I try to execute the rman clone, it tells me for each datafile:
    RMAN-06023: no backup or copy of datafile 1 found to restore
    Like I said, I am able to do this for a current backup that is on disk. I moved the backup files to the source db server and it works fine. However, from these files restored from tape it errors.
    Here is the RMAN script:
    spool log to c:\temp\clone_CSPROD_CSPRSUM1.log;
    #connect to catalog <catalog info>
    # target is the source and auxiliary is destination
    #connect target <put in source info here>
    #connect auxiliary /
    run {
    allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
    allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
    allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
    allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
    allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
    ##Archivelog number get from sql archive log list command
    #set until sequence 831;
    set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
    duplicate target database to CSPRSUM1 nofilenamecheck
    logfile
    group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
    group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
    group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
    Exit
    Here is the output:
    Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
    Recovery Manager11.1.0.7.0
    RMAN> #connect catalog <redacted info>>
    2> # target is the source and auxiliary is destination
    3> #connect target <redacted info>
    4> #connect auxiliary /
    5>
    6> run {
    7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
    8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
    9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
    10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
    11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
    12> ##Archivelog number get from sql archive log list command
    13> #set until sequence 831;
    14> set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
    15> duplicate target database to CSPRSUM1 nofilenamecheck
    16> logfile
    17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
    18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
    19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
    20> }
    starting full resync of recovery catalog
    full resync complete
    allocated channel: d1
    channel d1: SID=534 device type=DISK
    allocated channel: d2
    channel d2: SID=533 device type=DISK
    allocated channel: d3
    channel d3: SID=532 device type=DISK
    allocated channel: d4
    channel d4: SID=531 device type=DISK
    allocated channel: a1
    channel a1: SID=530 device type=DISK
    executing command: SET until clause
    Starting Duplicate Db at 15-JUN-11
    RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
    contents of Memory Script:
    set until scn 260398799;
    set newname for datafile 1 to
    "+data";
    set newname for datafile 2 to
    "+data";
    set newname for datafile 3 to
    "+data";
    set newname for datafile 4 to
    "+data";
    set newname for datafile 5 to
    "+data";
    set newname for datafile 6 to
    "+data";
    set newname for datafile 7 to
    "+data";
    set newname for datafile 8 to
    "+data";
    set newname for datafile 9 to
    "+data";
    set newname for datafile 10 to
    "+data";
    set newname for datafile 11 to
    "+data";
    set newname for datafile 12 to
    "+data";
    set newname for datafile 13 to
    "+data";
    set newname for datafile 14 to
    "+data";
    set newname for datafile 15 to
    "+data";
    set newname for datafile 16 to
    "+data";
    set newname for datafile 17 to
    "+data";
    set newname for datafile 18 to
    "+data";
    set newname for datafile 19 to
    "+data";
    set newname for datafile 20 to
    "+data";
    set newname for datafile 21 to
    "+data";
    set newname for datafile 22 to
    "+data";
    set newname for datafile 23 to
    "+data";
    set newname for datafile 24 to
    "+data";
    set newname for datafile 25 to
    "+data";
    set newname for datafile 26 to
    "+data";
    set newname for datafile 27 to
    "+data";
    set newname for datafile 28 to
    "+data";
    set newname for datafile 29 to
    "+data";
    set newname for datafile 30 to
    "+data";
    set newname for datafile 31 to
    "+data";
    set newname for datafile 32 to
    "+data";
    set newname for datafile 33 to
    "+data";
    set newname for datafile 34 to
    "+data";
    set newname for datafile 35 to
    "+data";
    set newname for datafile 36 to
    "+data";
    set newname for datafile 37 to
    "+data";
    set newname for datafile 38 to
    "+data";
    set newname for datafile 39 to
    "+data";
    set newname for datafile 40 to
    "+data";
    set newname for datafile 41 to
    "+data";
    set newname for datafile 42 to
    "+data";
    set newname for datafile 43 to
    "+data";
    set newname for datafile 44 to
    "+data";
    set newname for datafile 45 to
    "+data";
    set newname for datafile 46 to
    "+data";
    set newname for datafile 47 to
    "+data";
    set newname for datafile 48 to
    "+data";
    set newname for datafile 49 to
    "+data";
    set newname for datafile 50 to
    "+data";
    set newname for datafile 51 to
    "+data";
    set newname for datafile 52 to
    "+data";
    set newname for datafile 53 to
    "+data";
    set newname for datafile 54 to
    "+data";
    set newname for datafile 55 to
    "+data";
    set newname for datafile 56 to
    "+data";
    set newname for datafile 57 to
    "+data";
    set newname for datafile 58 to
    "+data";
    set newname for datafile 59 to
    "+data";
    set newname for datafile 60 to
    "+data";
    set newname for datafile 61 to
    "+data";
    set newname for datafile 62 to
    "+data";
    set newname for datafile 63 to
    "+data";
    set newname for datafile 64 to
    "+data";
    set newname for datafile 65 to
    "+data";
    set newname for datafile 66 to
    "+data";
    set newname for datafile 67 to
    "+data";
    set newname for datafile 68 to
    "+data";
    set newname for datafile 69 to
    "+data";
    set newname for datafile 70 to
    "+data";
    set newname for datafile 71 to
    "+data";
    set newname for datafile 72 to
    "+data";
    set newname for datafile 73 to
    "+data";
    set newname for datafile 74 to
    "+data";
    set newname for datafile 75 to
    "+data";
    set newname for datafile 76 to
    "+data";
    set newname for datafile 77 to
    "+data";
    set newname for datafile 78 to
    "+data";
    set newname for datafile 79 to
    "+data";
    set newname for datafile 80 to
    "+data";
    set newname for datafile 81 to
    "+data";
    set newname for datafile 82 to
    "+data";
    set newname for datafile 83 to
    "+data";
    set newname for datafile 84 to
    "+data";
    set newname for datafile 85 to
    "+data";
    set newname for datafile 86 to
    "+data";
    set newname for datafile 87 to
    "+data";
    set newname for datafile 88 to
    "+data";
    set newname for datafile 89 to
    "+data";
    set newname for datafile 90 to
    "+data";
    set newname for datafile 91 to
    "+data";
    set newname for datafile 92 to
    "+data";
    set newname for datafile 93 to
    "+data";
    set newname for datafile 94 to
    "+data";
    set newname for datafile 95 to
    "+data";
    set newname for datafile 96 to
    "+data";
    set newname for datafile 97 to
    "+data";
    set newname for datafile 98 to
    "+data";
    set newname for datafile 99 to
    "+data";
    set newname for datafile 100 to
    "+data";
    set newname for datafile 101 to
    "+data";
    set newname for datafile 102 to
    "+data";
    set newname for datafile 103 to
    "+data";
    set newname for datafile 104 to
    "+data";
    set newname for datafile 105 to
    "+data";
    set newname for datafile 106 to
    "+data";
    set newname for datafile 107 to
    "+data";
    set newname for datafile 108 to
    "+data";
    set newname for datafile 109 to
    "+data";
    set newname for datafile 110 to
    "+data";
    set newname for datafile 111 to
    "+data";
    set newname for datafile 112 to
    "+data";
    set newname for datafile 113 to
    "+data";
    set newname for datafile 114 to
    "+data";
    set newname for datafile 115 to
    "+data";
    set newname for datafile 116 to
    "+data";
    set newname for datafile 117 to
    "+data";
    set newname for datafile 118 to
    "+data";
    set newname for datafile 119 to
    "+data";
    set newname for datafile 120 to
    "+data";
    set newname for datafile 121 to
    "+data";
    set newname for datafile 122 to
    "+data";
    restore
    clone database
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 15-JUN-11
    released channel: d1
    released channel: d2
    released channel: d3
    released channel: d4
    released channel: a1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 06/15/2011 11:21:42
    RMAN-01005: not all datafiles have backups that can be recovered to scn 260398799
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 122 found to restore
    RMAN-06023: no backup or copy of datafile 121 found to restore
    RMAN-06023: no backup or copy of datafile 120 found to restore
    RMAN-06023: no backup or copy of datafile 119 found to restore
    RMAN-06023: no backup or copy of datafile 118 found to restore
    RMAN-06023: no backup or copy of datafile 117 found to restore
    RMAN-06023: no backup or copy of datafile 116 found to restore
    RMAN-06023: no backup or copy of datafile 115 found to restore
    RMAN-06023: no backup or copy of datafile 114 found to restore
    RMAN-06023: no backup or copy of datafile 113 found to restore
    RMAN-06023: no backup or copy of datafile 112 found to restore
    RMAN-06023: no backup or copy of datafile 111 found to restore
    RMAN-06023: no backup or copy of datafile 110 found to restore
    RMAN-06023: no backup or copy of datafile 109 found to restore
    RMAN-06023: no backup or copy of datafile 108 found to restore
    RMAN-06023: no backup or copy of datafile 107 found to restore
    RMAN-06023: no backup or copy of datafile 106 found to restore
    RMAN-06023: no backup or copy of datafile 105 found to restore
    RMAN-06023: no backup or copy of datafile 104 found to restore
    RMAN-06023: no backup or copy of datafile 103 found to restore
    RMAN-06023: no backup or copy of datafile 102 found to restore
    RMAN-06023: no backup or copy of datafile 101 found to restore
    RMAN-06023: no backup or copy of datafile 100 found to restore
    RMAN-06023: no backup or copy of datafile 99 found to restore
    RMAN-06023: no backup or copy of datafile 98 found to restore
    RMAN-06023: no backup or copy of datafile 97 found to restore
    RMAN-06023: no backup or copy of datafile 96 found to restore
    RMAN-06023: no backup or copy of datafile 95 found to restore
    RMAN-06023: no backup or copy of datafile 94 found to restore
    RMAN-06023: no backup or copy of datafile 93 found to restore
    RMAN-06023: no backup or copy of datafile 92 found to restore
    RMAN-06023: no backup or copy of datafile 91 found to restore
    RMAN-06023: no backup or copy of datafile 90 found to restore
    RMAN-06023: no backup or copy of datafile 89 found to restore
    RMAN-06023: no backup or copy of datafile 88 found to restore
    RMAN-06023: no backup or copy of datafile 87 found to restore
    RMAN-06023: no backup or copy of datafile 86 found to restore
    RMAN-06023: no backup or copy of datafile 85 found to restore
    RMAN-06023: no backup or copy of datafile 84 found to restore
    RMAN-06023: no backup or copy of datafile 83 found to restore
    RMAN-06023: no backup or copy of datafile 82 found to restore
    RMAN-06023: no backup or copy of datafile 81 found to restore
    RMAN-06023: no backup or copy of datafile 80 found to restore
    RMAN-06023: no backup or copy of datafile 79 found to restore
    RMAN-06023: no backup or copy of datafile 78 found to restore
    RMAN-06023: no backup or copy of datafile 77 found to restore
    RMAN-06023: no backup or copy of datafile 76 found to restore
    RMAN-06023: no backup or copy of datafile 75 found to restore
    RMAN-06023: no backup or copy of datafile 74 found to restore
    RMAN-06023: no backup or copy of datafile 73 found to restore
    RMAN-06023: no backup or copy of datafile 72 found to restore
    RMAN-06023: no backup or copy of datafile 71 found to restore
    RMAN-06023: no backup or copy of datafile 70 found to restore
    RMAN-06023: no backup or copy of datafile 69 found to restore
    RMAN-06023: no backup or copy of datafile 68 found to restore
    RMAN-06023: no backup or copy of datafile 67 found to restore
    RMAN-06023: no backup or copy of datafile 66 found to restore
    RMAN-06023: no backup or copy of datafile 65 found to restore
    RMAN-06023: no backup or copy of datafile 64 found to restore
    RMAN-06023: no backup or copy of datafile 63 found to restore
    RMAN-06023: no backup or copy of datafile 62 found to restore
    RMAN-06023: no backup or copy of datafile 61 found to restore
    RMAN-06023: no backup or copy of datafile 60 found to restore
    RMAN-06023: no backup or copy of datafile 59 found to restore
    RMAN-06023: no backup or copy of datafile 58 found to restore
    RMAN-06023: no backup or copy of datafile 57 found to restore
    RMAN-06023: no backup or copy of datafile 56 found to restore
    RMAN-06023: no backup or copy of datafile 55 found to restore
    RMAN-06023: no backup or copy of datafile 54 found to restore
    RMAN-06023: no backup or copy of datafile 53 found to restore
    RMAN-06023: no backup or copy of datafile 52 found to restore
    RMAN-06023: no backup or copy of datafile 51 found to restore
    RMAN-06023: no backup or copy of datafile 50 found to restore
    RMAN-06023: no backup or copy of datafile 49 found to restore
    RMAN-06023: no backup or copy of datafile 48 found to restore
    RMAN-06023: no backup or copy of datafile 47 found to restore
    RMAN-06023: no backup or copy of datafile 46 found to restore
    RMAN-06023: no backup or copy of datafile 45 found to restore
    RMAN-06023: no backup or copy of datafile 44 found to restore
    RMAN-06023: no backup or copy of datafile 43 found to restore
    RMAN-06023: no backup or copy of datafile 42 found to restore
    RMAN-06023: no backup or copy of datafile 41 found to restore
    RMAN-06023: no backup or copy of datafile 40 found to restore
    RMAN-06023: no backup or copy of datafile 39 found to restore
    RMAN-06023: no backup or copy of datafile 38 found to restore
    RMAN-06023: no backup or copy of datafile 37 found to restore
    RMAN-06023: no backup or copy of datafile 36 found to restore
    RMAN-06023: no backup or copy of datafile 35 found to restore
    RMAN-06023: no backup or copy of datafile 34 found to restore
    RMAN-06023: no backup or copy of datafile 33 found to restore
    RMAN-06023: no backup or copy of datafile 32 found to restore
    RMAN-06023: no backup or copy of datafile 31 found to restore
    RMAN-06023: no backup or copy of datafile 30 found to restore
    RMAN-06023: no backup or copy of datafile 29 found to restore
    RMAN-06023: no backup or copy of datafile 28 found to restore
    RMAN-06023: no backup or copy of datafile 27 found to restore
    RMAN-06023: no backup or copy of datafile 26 found to restore
    RMAN-06023: no backup or copy of datafile 25 found to restore
    RMAN-06023: no backup or copy of datafile 24 found to restore
    RMAN-06023: no backup or copy of datafile 23 found to restore
    RMAN-06023: no backup or copy of datafile 22 found to restore
    RMAN-06023: no backup or copy of datafile 21 found to restore
    RMAN-06023: no backup or copy of datafile 20 found to restore
    RMAN-06023: no backup or copy of datafile 19 found to restore
    RMAN-06023: no backup or copy of datafile 18 found to restore
    RMAN-06023: no backup or copy of datafile 17 found to restore
    RMAN-06023: no backup or copy of datafile 16 found to restore
    RMAN-06023: no backup or copy of datafile 15 found to restore
    RMAN-06023: no backup or copy of datafile 14 found to restore
    RMAN-06023: no backup or copy of datafile 13 found to restore
    RMAN-06023: no backup or copy of datafile 12 found to restore
    RMAN-06023: no backup or copy of datafile 11 found to restore
    RMAN-06023: no backup or copy of datafile 10 found to restore
    RMAN-06023: no backup or copy of datafile 9 found to restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    RMAN> Exit
    Recovery Manager complete.
    Edited by: kerrygm on Jun 15, 2011 11:36 AM

    Maybe making progress.
    I got into RMAN and did a List backup command. In looking at the output, I see that it does have the 5/20 backup showing. Here is part of the output:
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    965689 Full 19.86M DISK 00:00:01 16-JUN-11
    BP Key: 967942 Status: AVAILABLE Compressed: NO Tag: TAG20110616T231223
    Piece Name: F:\BACKUPS\CSPROD\C-368871413-20110616-01
    SPFILE Included: Modification time: 16-JUN-11
    SPFILE db_unique_name: CSPROD
    Control File Included: Ckp SCN: 369596068 Ckp time: 16-JUN-11
    BS Key Size Device Type Elapsed Time Completion Time
    966218 403.84M DISK 00:00:00 20-MAY-11
    BP Key: 967842 Status: AVAILABLE Compressed: YES Tag: TAG20110520T231012
    Piece Name: F:\BACKUPS\CSPROD\A1\CSPROD_ARCH_5844
    List of Archived Logs in backup set 966218
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 2112 237027300 20-MAY-11 237046947 20-MAY-11
    1 2113 *237046947* 20-MAY-11 237059284 20-MAY-11
    1 2114 237059284 20-MAY-11 237216514 20-MAY-11
    1 2115 237216514 20-MAY-11 237709545 20-MAY-11
    1 2116 237709545 20-MAY-11 237722825 20-MAY-11
    1 2117 237722825 20-MAY-11 237730431 20-MAY-11
    1 2118 237730431 20-MAY-11 237860199 20-MAY-11
    I then changed my rman script to use the *237046947* SCN number that says it is from 5/20. I them kicked off my rman script and got the following result.
    Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
    Recovery Manager11.1.0.7.0
    RMAN> #connect catalog 'rmancat/[email protected]';
    2> # target is the source and auxiliary is destination
    3> #connect target sys/<pwd>@csprod
    4> #connect auxiliary /
    5>
    6> run {
    7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
    8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
    9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
    10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
    11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
    12> ##Archivelog number get from sql archive log list command
    13> set until sequence 237046947;
    14> ##set until time "to_date('2011-05-20 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
    15> duplicate target database to CSPRSUM1 nofilenamecheck
    16> logfile
    17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
    18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
    19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
    20> }
    allocated channel: d1
    channel d1: SID=532 device type=DISK
    allocated channel: d2
    channel d2: SID=533 device type=DISK
    allocated channel: d3
    channel d3: SID=531 device type=DISK
    allocated channel: d4
    channel d4: SID=555 device type=DISK
    allocated channel: a1
    channel a1: SID=534 device type=DISK
    executing command: SET until clause
    Starting Duplicate Db at 17-JUN-11
    RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
    contents of Memory Script:
    set until scn 373021170;
    set newname for datafile 1 to
    "+data";
    set newname for datafile 2 to
    Starting restore at 17-JUN-11
    channel d1: starting datafile backup set restore
    channel d1: specifying datafile(s) to restore from backup set
    channel d1: restoring datafile 00003 to +DATA
    channel d2: restoring datafile 00122 to +DATA
    channel d2: reading from backup piece F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149
    channel d3: starting datafile backup set restore
    channel d3: specifying datafile(s) to restore from backup set
    channel d3: restoring datafile 00002 to +DATA
    channel d3: restoring datafile 00020 to +DATA
    channel d4: restoring datafile 00120 to +DATA
    channel d4: reading from backup piece F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147
    channel d1: piece handle=F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 tag=TAG20110616T230013
    channel d1: restored backup piece 1
    channel d1: restore complete, elapsed time: 00:01:15
    channel d4: piece handle=F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147 tag=TAG20110616T230013
    channel d4: restored backup piece 1
    channel d4: restore complete, elapsed time: 00:03:15
    channel d2: piece handle=F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149 tag=TAG20110616T230013
    channel d2: restored backup piece 1
    channel d2: restore complete, elapsed time: 00:03:35
    channel d3: piece handle=F:\BACKUPS\CSPROD\D1\CSPROD_DATA_6146 tag=TAG20110616T230013
    channel d3: restored backup piece 1
    channel d3: restore complete, elapsed time: 00:04:55
    Finished restore at 17-JUN-11
    sql statement: CREATE CONTROLFILE REUSE SET DATABASE "CSPRSUM1" RESETLOGS ARCHIVELOG
    MAXLOGFILES 23
    MAXLOGMEMBERS 3
    MAXDATAFILES 1021
    MAXINSTANCES 8
    MAXLOGHISTORY 584
    LOGFILE
    GROUP 1 ( '+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log' ) SIZE 50 M ,
    GROUP 2 ( '+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log' ) SIZE 50 M ,
    GROUP 3 ( '+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log' ) SIZE 50 M
    DATAFILE
    '+DATA/csprsum1/datafile/system.1535.754067379'
    CHARACTER SET WE8MSWIN1252
    contents of Memory Script:
    switch clone datafile all;
    executing Memory Script
    datafile 2 switched to datafile copy
    input datafile copy RECID=1 STAMP=754067676 file name=+DATA/csprsum1/datafile/sysaux.1536.754067379
    datafile 121 switched to datafile copy
    input datafile copy RECID=120 STAMP=754067677 file name=+DATA/csprsum1/datafile/waapp.1653.754067403
    datafile 122 switched to datafile copy
    input datafile copy RECID=121 STAMP=754067677 file name=+DATA/csprsum1/datafile/cu_custom.1549.754067381
    contents of Memory Script:
    set until scn 373021170;
    recover
    clone database
    delete archivelog
    executing Memory Script
    executing command: SET until clause
    Starting recover at 17-JUN-11
    starting media recovery
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '+DATA/csprsum1/datafile/system.1535.754067379'
    released channel: d1
    released channel: d2
    released channel: d3
    released channel: d4
    released channel: a1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 06/17/2011 15:14:54
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06053: unable to perform media recovery because of missing log
    RMAN-06025: no backup of archived log for thread 1 with sequence 3818 and starting SCN of 372868482 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3817 and starting SCN of 372685133 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3816 and starting SCN of 372593528 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3815 and starting SCN of 372374385 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3814 and starting SCN of 372325053 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3813 and starting SCN of 372316138 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3812 and starting SCN of 372249619 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3811 and starting SCN of 371775981 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3810 and starting SCN of 371643855 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3809 and starting SCN of 371614442 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3808 and starting SCN of 371432892 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3807 and starting SCN of 371121955 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3806 and starting SCN of 371047786 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3805 and starting SCN of 371029095 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3804 and starting SCN of 371018252 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3803 and starting SCN of 370947755 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3802 and starting SCN of 370857440 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3801 and starting SCN of 370814417 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3800 and starting SCN of 370797061 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3799 and starting SCN of 370756569 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3798 and starting SCN of 370746833 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3797 and starting SCN of 370746693 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3796 and starting SCN of 370746568 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3795 and starting SCN of 370746068 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3794 and starting SCN of 370745451 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3793 and starting SCN of 370733767 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3792 and starting SCN of 370674629 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3791 and starting SCN of 370501026 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3790 and starting SCN of 370498513 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3789 and starting SCN of 370497977 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3788 and starting SCN of 370497635 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3787 and starting SCN of 370497319 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3786 and starting SCN of 370496938 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3785 and starting SCN of 370495428 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3784 and starting SCN of 370491173 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3783 and starting SCN of 370390074 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3782 and starting SCN of 370385574 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3781 and starting SCN of 370385310 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3780 and starting SCN of 370385044 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3779 and starting SCN of 370368486 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3778 and starting SCN of 370333960 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3777 and starting SCN of 370330980 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3776 and starting SCN of 370327876 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3775 and starting SCN of 370174433 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3774 and starting SCN of 370148373 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3773 and starting SCN of 370147821 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3772 and starting SCN of 370147623 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3771 and starting SCN of 370141528 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3770 and starting SCN of 369711271 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3769 and starting SCN of 369621694 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 3768 and starting SCN of 369595614 found to restore
    RMAN> Exit
    Recovery Manager complete.
    What I am not sure is if the SCN I used in my set until sequence command was from 5/20, when I look at the backup pieces that it is reading to restore from, they appear to be from backup files taken from June.
    (e.g channel d1: reading from backup piece F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 -- this is a 6/16 backup file).
    Also, as you can see it was not able to do a media recovery.
    Thanks in advance for your help.

  • RMAN-06010: error while looking up datafile: 82

    Iam building dataguard - Physical Standby database by using the RMAN duplicate command and we are not using the recovery catalog but control file.
    Iam getting the following error while running the duplicate command.
    set newname for datafile 82 to
    "/dflx02/flx/o01flx3rbs/rbs02_02.O01FLX3";
    RMAN-06010: error while looking up datafile: 82
    Actually we dropped the datafile(tablespace) before taken the backup but it is giving error though we are using the latest control file.
    I do not see this file is available in the database as we dropped it successfully.
    Could some one let me know what could be the problem and how to resolve it.
    Your early response is greatly appreciated.
    Note:
    backup script -- It went successfully.
    # Script to be used to backup the production in preparation of creating a DataGuard instance
    YYYY=`date +"%Y"`
    mmdd=`date +"%m%d"`
    hh=`date +"%H"`
    mm=`date +"%M"`
    ss=`date +"%S"`
    hhmmss=${hh}${mm}${ss}
    dt=${YYYY}${mmdd}_${hhmmss}
    echo "Starting backup on O01FLX3"
    $ORACLE_HOME/bin/rman nocatalog <<EOF >> /dflx02/flx/oracle/log/full_backup_run_$dt.log
    connect target /
    configure device type disk clear;
    configure channel device type disk maxpiecesize 4G;
    configure device type disk backup type to compressed backupset parallelism 8;
    run{
    change archivelog all validate;
    backup current controlfile for standby format '/tmp/stby_snapcf_O01FLX3.f';
    backup database format '/dflx02/flx/o01flx3dump/rman/O01FLX3_%s_%p_%T_%t.bak';
    sql 'alter system archive log current';
    backup archivelog all format '/dflx02/flx/o01flx3dump/rman/O01FLX3_%s_%p_%T_%t.arc';
    EXIT
    EOF
    duplicate Script:
    #!/bin/ksh
    # Script to create standby database for production.
    YYYY=`date +"%Y"`
    mmdd=`date +"%m%d"`
    hh=`date +"%H"`
    mm=`date +"%M"`
    ss=`date +"%S"`
    hhmmss=${hh}${mm}${ss}
    dt=${YYYY}${mmdd}_${hhmmss}
    echo "Starting dataguard instance on O01FLX3DR"
    $ORACLE_HOME/bin/rman nocatalog <<EOF >> /dflx02/flx/oracle/log/cr_stdby_O01FLX3$dt.log
    connect target /
    connect auxiliary sys/[email protected]
    configure channel device type disk maxpiecesize 4G;
    configure device type disk backup type to compressed backupset parallelism 8;
    run {
    set until time "to_date('20080217:19:00', 'YYYYMMDD:HH24:MI')";
    duplicate target database for standby dorecover nofilenamecheck;
    exit;
    EOF
    set newname for datafile 82 to
    "/dflx02/flx/o01flx3rbs/rbs02_02.O01FLX3";

    Thank you for your reply. Actually Iam not renaming the datafile but building the
    dataguard instance and some how control file is looking for old datafile that was deleted.
    Actually both primary and dataguard instances are running on 10.2.0.3 . Oracle control file is listing the datafile 82 as old deleted file, while building the dataguard.
    ---- This file was deleted long time back but still oracle control file is looking for this file while building the dataguard. Iam using the latest control file.
    set newname for datafile 82 to
    "/dflx02/flx/o01flx3rbs/rbs02_02.O01FLX3"
    When I listed the datafile 82, it is showing the correct datafile.
    RMAN> list backup of datafile 82;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    50234 Incr 2 26.93M DISK 00:04:03 18-FEB-08
    BP Key: 101470 Status: AVAILABLE Compressed: YES Tag: DATABASE_BACKUP
    Piece Name: /dflx02/flx/o01flx3dump/rman/O01FLX3_51757_1_20080218_647031779.bak
    List of Datafiles in backup set 50234
    File LV Type Ckp SCN Ckp Time Name
    82 2 Incr 7953177017970 18-FEB-08 /dflx02/flx/o01flx3ndx15/flx_ndx3_18.O01FLX3
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    50334 Incr 2 27.76M DISK 00:04:16 19-FEB-08
    BP Key: 101587 Status: AVAILABLE Compressed: YES Tag: DATABASE_BACKUP
    Piece Name: /dflx02/flx/o01flx3dump/rman/O01FLX3_51857_1_20080219_647119328.bak
    List of Datafiles in backup set 50334
    File LV Type Ckp SCN Ckp Time Name
    82 2 Incr 7953257549488 19-FEB-08 /dflx02/flx/o01flx3ndx15/flx_ndx3_18.O01FLX3
    So Iam thinking that there should be a problem in control file and let me know how to resolve it.
    Please let me know if you have any questions.
    Thanks for your help.
    Suresh.D

  • Issue with RMAN DUPLICATE FROM ACTIVE DATABASE....

    Hi All,
    Not sure if I should continue from a closed thread, so apologies, opening a new one..
    I ran the following command:
    DUPLICATE TARGET DATABASE TO ' AUX1"
    from ACTIVE DATABASE
    NOFILENAMECHECK:
    So the copy went in fine...so I am confiused now....why when doing a recover, i get the below errors from output:
    archived log for thread 1 with sequence 68346 is already on disk as file H:\ORAC
    LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68346_ARCH_D-RBS_ID-295728924
    5_S-68346_T-1_A-780292253_C1OQVOSU_.ARC
    archived log for thread 1 with sequence 68347 is already on disk as file H:\ORAC
    LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68347_ARCH_D-RBS_ID-295728924
    5_S-68347_T-1_A-780292253_C3OQVOU1_.ARC
    archived log for thread 1 with sequence 68348 is already on disk as file H:\ORAC
    LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68348_ARCH_D-RBS_ID-295728924
    5_S-68348_T-1_A-780292253_C4OQVOU6_.ARC
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/08/2013 07:36:04
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06053: unable to perform media recovery because of missing log
    RMAN-06025: no backup of archived log for thread 1 with sequence 64713 and start
    ing SCN of 12728145997 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64712 and start
    ing SCN of 12728133322 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64711 and start
    ing SCN of 12728121403 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64709 and start
    ing SCN of 12727730726 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64708 and start
    ing SCN of 12727717143 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64707 and start
    ing SCN of 12727701799 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64704 and start
    ing SCN of 12726617917 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64703 and start
    ing SCN of 12726605080 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64702 and start
    No archivelogs were purged or backed up and the current logs were retained....so im somewhat confused....i am not restoring from backup but running active duplicate...
    should I re-run the command with:
    SET UNTIL SEQUENCE 64713 THREAD 1

    This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
    Could you please help me on how to proceed?
    One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
    Another option is to go for backup based duplicate.
    Is there any other way to go?
    Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = AUXDB)
          (ORACLE_HOME = <your oracle home>)
          (SID_NAME = AUXDB)
    LISTENER =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
      )And restart listener on auxiliary host then try again

  • RMAN DUPLICATE FOR STANDBY FROM ACTIVE DATABASE fails

    Hello
    I'm trying to use RMAN DUPLICATE to create a standby database using Oracle 11.2.0.3 with PSU 6 on HP-UX.
    Primary is 2 node RAC. Standby is also 2 node RAC.
    Standby database instance is started in nomount mode.
    I use:
    duplicate target database for standby from active database
      spfile
      <some spfile parameters>
    with PFILE I get:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/01/2013 12:41:13
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of sql command on clone_default channel at 10/01/2013 12:41:13
    RMAN-11003: failure during parse/execution of SQL statement: alter system set spfile= '/opt/oracle/db11203/dbs/spfileCU1.ora'
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-01565: error in identifying file '/opt/oracle/db11203/dbs/spfileCU1.ora'
    ORA-27037: unable to obtain file status
    HPUX-ia64 Error: 2: No such file or directory
    With SPFILE I get;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/01/2013 13:06:34
    RMAN-05501: aborting duplication of target database
    RMAN-05537: DUPLICATE without TARGET connection when auxiliary instance is started with spfile cannot use SPFILE clause
    But I do have RMAN connexion to target database.
    Thanks for your help.

    Here is the output beginning of the script which clearly shows that I'm always connected to target database:
    Recovery Manager: Release 11.2.0.3.0 - Production on Tue Oct 1 13:05:47 2013
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    connected to target database: CU (DBID=1143962925)
    connected to auxiliary database: CU (not mounted)
    RMAN> set echo on
    2> run
    3> {
    4>  configure device type disk parallelism 10;
    5>   allocate channel pr1 type disk;
    6>   allocate channel pr2 type disk;
    7>   allocate channel pr3 type disk;
    8>   allocate channel pr4 type disk;
    9>   allocate channel pr5 type disk;
    10>   allocate channel pr6 type disk;
    11>   allocate channel pr7 type disk;
    12>   allocate channel pr8 type disk;
    13>   allocate channel pr9 type disk;
    14>   allocate channel pr10 type disk;
    15>   allocate auxiliary channel st1 type disk;
    16>   allocate auxiliary channel st2 type disk;
    17>   allocate auxiliary channel st3 type disk;
    18>   allocate auxiliary channel st4 type disk;
    19>   allocate auxiliary channel st5 type disk;
    20>   allocate auxiliary channel st6 type disk;
    21>   allocate auxiliary channel st7 type disk;
    22>   allocate auxiliary channel st8 type disk;
    23>   allocate auxiliary channel st9 type disk;
    24>   allocate auxiliary channel st10 type disk;
    25>   duplicate target database for standby from active database
    26>   spfile

  • RMAN-03015: error occurred in stored script Memory Script

    getting this error during
    target db is 10202 & aux is 10204 ?
    duplicate target database to dcxt;
    RMAN> connect TARGET SYS/[email protected];
    PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
    PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
    connected to target database: CAPQ (DBID=2420849281)
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00601: fatal error in recovery manager
    RMAN-03004: fatal error during execution of command
    RMAN-10039: error encountered while polling for RPC completion on channel clone_default
    RMAN-10006: error running SQL statement: select action from gv$session where sid=:1 and serial#=:2 and inst_id=:3
    RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
    RMAN-10041: Could not re-create polling channel context following failure.
    RMAN-10024: error setting up for rpc polling
    RMAN-10005: error opening cursor
    RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
    RMAN-03002: failure of Duplicate Db command at 05/21/2010 15:32:29
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    oracle:tuldcorpadb01:dcxt$
    Edited by: DBA2008 on May 21, 2010 3:37 PM

    never mind, i resolved this by switching duplicate db to 10203....and adjusting log_arch_dest .....

  • RMAN Clone Errors

    Hello,
    We use Commvault for our backup software. I can successfully clone one application's PROD instance on server1 to TEST on server2.
    However, for another application, attempting the same process of cloning the app's PROD instance on server1 to TEST on server2, I'm getting RMAN errors.
    The prod database is ISLP and test database is ISLT. I've set the parameters:
    o     alter system set db_file_name_convert = '/u02/oradata/ISLP', '/u02/oradata/ISLT'
    o     alter system set log_file_name_convert= '/u01/oradata/ISLP', '/data/oracle/ISLT'
    Again the destination is on a second server.
    The error message I receive is:
    Oracle instance shut down
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 05/09/2013 12:48:55
    RMAN-05501: aborting duplication of target database
    RMAN-05001: auxiliary file name /u02/oradata/ISLP/redo_ISLP_2b.log conflicts with a file used by the target database
    RMAN-05001: auxiliary file name /u02/oradata/ISLP/redo_ISLP_1b.log conflicts with a file used by the target database
    RMAN>
    Recovery Manager complete.
    I don't understand why RMAN keeps trying to create new redo log files in a directory that is not specified by the log_file_name_convert parameter. I also don't understand why this exact same process works for cloning one applications database but not this application. I would appreciate any help. Thank you. Here is the RMAN script being executed by Commvault.
    Rman Script:
    [run {
    set newname for datafile '/u02/oradata/ISLP/infosilem_ISLP_01.dbf' to '/u02/oradata/ISLT/infosilem_ISLP_01.dbf';
    set newname for datafile '/u02/oradata/ISLP/sysaux_ISLP_01.dbf' to '/u02/oradata/ISLT/sysaux_ISLP_01.dbf';
    set newname for datafile '/u02/oradata/ISLP/system_ISLP_01.dbf' to '/u02/oradata/ISLT/system_ISLP_01.dbf';
    set newname for datafile '/u02/oradata/ISLP/tools_ISLP_01.dbf' to '/u02/oradata/ISLT/tools_ISLP_01.dbf';
    set newname for datafile '/u02/oradata/ISLP/undo_ISLP_01.dbf' to '/u02/oradata/ISLT/undo_ISLP_01.dbf';
    set newname for datafile '/u02/oradata/ISLP/users_ISLP_01.dbf' to '/u02/oradata/ISLT/users_ISLP_01.dbf';
    allocate auxiliary channel ch1 type 'sbt_tape'
    PARMS="SBT_LIBRARY=/opt/galaxy/Base64/libobk.so,BLKSIZE=262144,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine= RESTORE  -jm 142 -a 2:0 -cl 137 -ins 150 -at 22 -j 700481 -jt 700481:3:1 -bal 0 -rcp 0 -ms 1 -p 2 -cn s-dbint -vm Instance001)"
    TRACE 0;
    set until time = "TO_DATE('05/08/2013 09:00:00','MM/DD/YYYY HH24:MI:SS')" ;
    duplicate target database to 'ISLT'
    exit;
    ]

    You haven't defined a log_file_name_convert for /u02/oradata/ISLP/
    Possibly, the database has multiplexed redo log files, one member each in /u01/oradata/ISLP and one member each in /u02/oradata/ISLP.
    Hemant K Chitale

  • The RMAN Duplicate Command Fails During The Recover.

    This exact script works fine in our lab. We are using Oracle 10.2.0.4.0.
    The hot backup for standby is also a script which runs without error in both the lab and
    the production machine.
    I am obviously missing something.
    Any help would be greatly appreciated.
    Thanks,
    Jeff
    =================
    RMAN BACKUP SCRIPT
    =================
    RMAN> run
    2> {
    3> allocate channel c1 device type disk format '/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_BK4STDBY_%U';
    4> backup current controlfile for standby format '/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_CNTRL4STDBY_%U';
    5> backup as compressed backupset check logical tag='1NETCMN1_3261_BK4STDBY' database include current controlfile for standby;
    6> backup archivelog from sequence 463 format '/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_LOGS4STDBY_%U';
    7> release channel c1;
    8> }
    released channel: ORA_DISK_1
    allocated channel: c1
    channel c1: sid=578 devtype=DISK
    Starting backup at 22-JAN-13
    channel c1: starting full datafile backupset
    channel c1: specifying datafile(s) in backupset
    including standby control file in backupset
    channel c1: starting piece 1 at 22-JAN-13
    channel c1: finished piece 1 at 22-JAN-13
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_CNTRL4STDBY_05o02f01_1_1 tag=TAG20130122T144104 comment=NONE
    channel c1: backup set complete, elapsed time: 00:00:02
    Finished backup at 22-JAN-13
    Starting backup at 22-JAN-13
    channel c1: starting compressed full datafile backupset
    channel c1: specifying datafile(s) in backupset
    input datafile fno=00004 name=/u01/oradata/apoint/users01.dbf
    input datafile fno=00001 name=/u01/oradata/apoint/system01.dbf
    input datafile fno=00002 name=/u01/oradata/apoint/undotbs01.dbf
    input datafile fno=00003 name=/u01/oradata/apoint/sysaux01.dbf
    channel c1: starting piece 1 at 22-JAN-13
    channel c1: finished piece 1 at 22-JAN-13
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_BK4STDBY_06o02f05_1_1 tag=1NETCMN1_3261_BK4STDBY comment=NONE
    channel c1: backup set complete, elapsed time: 00:22:35
    channel c1: starting compressed full datafile backupset
    channel c1: specifying datafile(s) in backupset
    including standby control file in backupset
    channel c1: starting piece 1 at 22-JAN-13
    channel c1: finished piece 1 at 22-JAN-13
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_BK4STDBY_07o02gah_1_1 tag=1NETCMN1_3261_BK4STDBY comment=NONE
    channel c1: backup set complete, elapsed time: 00:00:07
    Finished backup at 22-JAN-13
    Starting backup at 22-JAN-13
    current log archived
    channel c1: starting archive log backupset
    channel c1: specifying archive log(s) in backup set
    input archive log thread=1 sequence=463 recid=5 stamp=805323439
    input archive log thread=1 sequence=464 recid=6 stamp=805331764
    input archive log thread=1 sequence=465 recid=7 stamp=805387242
    input archive log thread=1 sequence=466 recid=8 stamp=805387245
    input archive log thread=1 sequence=467 recid=9 stamp=805388633
    channel c1: starting piece 1 at 22-JAN-13
    channel c1: finished piece 1 at 22-JAN-13
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_LOGS4STDBY_08o02gaq_1_1 tag=TAG20130122T150354 comment=NONE
    channel c1: backup set complete, elapsed time: 00:00:36
    Finished backup at 22-JAN-13
    released channel: c1
    RMAN> exit
    Recovery Manager complete.
    =====================
    RMAN DUPLICATE SCRIPT
    =====================
    RMAN> run
    2> {
    3> allocate auxiliary channel c1 device type disk;
    4>
    5> duplicate target database for standby dorecover nofilenamecheck;
    6> release channel c1;
    7> }
    allocated channel: c1
    channel c1: sid=299 devtype=DISK
    Starting Duplicate Db at 21-JAN-13
    contents of Memory Script:
    set until scn 143395851;
    restore clone standby controlfile;
    sql clone 'alter database mount standby database';
    executing Memory Script
    executing command: SET until clause
    Starting restore at 21-JAN-13
    channel c1: starting datafile backupset restore
    channel c1: restoring control file
    channel c1: reading from backup piece /u03/oradata/apoint/DB_BACKUPS/1NETCMN1_6874_BK4STDBY_03o008gn_1_1
    channel c1: restored backup piece 1
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_6874_BK4STDBY_03o008gn_1_1 tag=1NETCMN1_6874_BK4STDBY
    channel c1: restore complete, elapsed time: 00:00:04
    output filename=/u01/oradata/apoint/control01.ctl
    output filename=/u02/oradata/apoint/control02.ctl
    output filename=/u03/oradata/apoint/control03.ctl
    Finished restore at 21-JAN-13
    sql statement: alter database mount standby database
    contents of Memory Script:
    set until scn 143395851;
    set newname for tempfile 1 to
    "/u01/oradata/apoint/temp01.dbf";
    switch clone tempfile all;
    set newname for datafile 1 to
    "/u01/oradata/apoint/system01.dbf";
    set newname for datafile 2 to
    "/u01/oradata/apoint/undotbs01.dbf";
    set newname for datafile 3 to
    "/u01/oradata/apoint/sysaux01.dbf";
    set newname for datafile 4 to
    "/u01/oradata/apoint/users01.dbf";
    restore
    check readonly
    clone database
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    renamed temporary file 1 to /u01/oradata/apoint/temp01.dbf in control file
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 21-JAN-13
    channel c1: starting datafile backupset restore
    channel c1: specifying datafile(s) to restore from backup set
    restoring datafile 00001 to /u01/oradata/apoint/system01.dbf
    restoring datafile 00002 to /u01/oradata/apoint/undotbs01.dbf
    restoring datafile 00003 to /u01/oradata/apoint/sysaux01.dbf
    restoring datafile 00004 to /u01/oradata/apoint/users01.dbf
    channel c1: reading from backup piece /u03/oradata/apoint/DB_BACKUPS/1NETCMN1_6874_BK4STDBY_02o0076b_1_1
    channel c1: restored backup piece 1
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_6874_BK4STDBY_02o0076b_1_1 tag=1NETCMN1_6874_BK4STDBY
    channel c1: restore complete, elapsed time: 00:21:32
    Finished restore at 21-JAN-13
    contents of Memory Script:
    switch clone datafile all;
    executing Memory Script
    datafile 1 switched to datafile copy
    input datafile copy recid=5 stamp=805323205 filename=/u01/oradata/apoint/system01.dbf
    datafile 2 switched to datafile copy
    input datafile copy recid=6 stamp=805323205 filename=/u01/oradata/apoint/undotbs01.dbf
    datafile 3 switched to datafile copy
    input datafile copy recid=7 stamp=805323206 filename=/u01/oradata/apoint/sysaux01.dbf
    datafile 4 switched to datafile copy
    input datafile copy recid=8 stamp=805323206 filename=/u01/oradata/apoint/users01.dbf
    contents of Memory Script:
    set until scn 143395851;
    recover
    standby
    clone database
    delete archivelog
    executing Memory Script
    executing command: SET until clause
    Starting recover at 21-JAN-13
    starting media recovery
    channel c1: starting archive log restore to default destination
    channel c1: restoring archive log
    archive log thread=1 sequence=462
    channel c1: reading from backup piece /u03/oradata/apoint/DB_BACKUPS/1NETCMN1_6874_LOGS4STDBY_04o008gu_1_1
    channel c1: restored backup piece 1
    piece handle=/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_6874_LOGS4STDBY_04o008gu_1_1 tag=TAG20130121T183822
    channel c1: restore complete, elapsed time: 00:00:03
    archive log filename=/u03/oradata/apoint/DB_ARCHIVE_LOGS/apoint_1_688761648_462.arch thread=1 sequence=462
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01152: file 1 was not restored from a sufficiently old backup
    ORA-01110: data file 1: '/u01/oradata/apoint/system01.dbf'
    released channel: c1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 01/21/2013 20:53:44
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/u03/oradata/apoint/DB_ARCHIVE_LOGS/apoint_1_688761648_462.arch'
    ORA-16145: archival for thread# 1 sequence# 462 in progress
    RMAN> exit

    Jeff;
    I think the issue is in your backup. If you compare your command with mine, you may or may not see the issue, but this is how I got this to work.
    Yours
    RMAN run
    allocate channel c1 device type disk format '/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_BK4STDBY_%U';
    backup current controlfile for standby format '/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_CNTRL4STDBY_%U';
    backup as compressed backupset check logical tag='1NETCMN1_3261_BK4STDBY' database include current controlfile for standby;
    backup archivelog from sequence 463 format '/u03/oradata/apoint/DB_BACKUPS/1NETCMN1_3261_LOGS4STDBY_%U';
    release channel c1;
    Mine
    RMAN RUN {
    allocate channel d1 type disk;
    backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
    sql 'alter system archive log current';
    backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
    backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
    release channel d1;
    }Your duplicate is very close to what I use :
    Yours
    RMAN> run
    allocate auxiliary channel c1 device type disk;
    duplicate target database for standby dorecover nofilenamecheck;
    release channel c1;
    Mine
    RMAN> run {
    allocate channel C1 device type disk;
    allocate auxiliary channel C2 device type disk;
    duplicate target database for standby nofilenamecheck;
    }Short notes :
    http://www.visi.com/~mseberg/duprman.html
    Best Regards
    mseberg

  • RMAN Duplicate DB fails to restore datafile created during backup.

    Database is 9i.
    Performing duplicate database using rman on seperate host.
    Reason of failure is , there were datafiles created during backup. Question is , Is there a workaround to perform duplicate database to work.
    Error :
    released channel: aux1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/16/2007 14:42:44
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 791 found to restore
    RMAN-06023: no backup or copy of datafile 790 found to restore
    RMAN-06023: no backup or copy of datafile 789 found to restore
    RMAN-06023: no backup or copy of datafile 788 found to restore
    RMAN-06023: no backup or copy of datafile 787 found to restore
    RMAN-06023: no backup or copy of datafile 786 found to restore
    Backup Date is : 23rd Nov to 26th Nov
    Datafile created between backup period are :
    786 /oracle/prod/proddata17/btabd_322/btabd.data322 Nov-25-2007 02:58:38 AM
    787 /oracle/prod/proddata17/btabd_323/btabd.data323 Nov-25-2007 03:06:02 AM
    788 /oracle/prod/proddata17/btabd_324/btabd.data324 Nov-25-2007 03:17:48 AM
    789 /oracle/prod/proddata17/btabd_325/btabd.data325 Nov-25-2007 03:26:50 AM
    790 /oracle/prod/proddata17/btabd_326/btabd.data326 Nov-25-2007 03:32:31 AM
    791 /oracle/prod/proddata17/btabd_327/btabd.data327 Nov-25-2007 03:39:59 AM
    Restore Script :
    rman TARGET dtbackup/[email protected] CATALOG rman_prd/[email protected]_db connect auxiliary /
    run {
    set until time = "TO_DATE('11/26/2007 10:30:00','mm/dd/yyyy hh24:mi:ss')";
    allocate auxiliary channel aux1 type 'SBT_TAPE' PARMS="BLKSIZE=262144";
    DUPLICATE TARGET DATABASE TO DUP ;
    }

    I think there is no workaround and this is expected behavior - atleast till 10.2. If you refer oracle documentation, it says that it requires target database in either MOUNT or OPEN stage to duplicate database using RMAN. So RMAN will get current physical structure information about target database from its control file and when any file is not there in the backup, it will give error. Only way to resolve this is to take backup of these datafiles through RMAN either as backupset or copy. ( I think oracle can take hint from here and make RMAN database duplication possible for which backup is not available - its a small change in code - if backup not found, then start taking backup. Already in 11g, during RMAN duplication, RMAN can use backup from other server)

  • RMAN duplicate Database

    Hi ALL,
    While doing duplicate database using RMAN i m getting following error.
    released channel: d1
    RMAN-00571: =================================
    RMAN-00569: === ERROR MESSAGE STACK FOLLOWS ======
    RMAN-00571: =======================================
    RMAN-03002: failure of Duplicate Db command at 05/14/2008 08:08:23
    RMAN-03015: error occurred in stored script Memory Script
    ORA-06550: line 1, column 1730:
    PLS-00302: component 'LOGTERMINAL_OBJ' must be declared
    ORA-06550: line 1, column 1716:
    PL/SQL: Statement ignored
    Recovery Manager complete.
    Please Help
    Regards
    Mital

    thanks Werner for reply ,
    the above problem is solved, the proble was that you have said. the problem was realted to version . the target db was of 10.2.0.3 and the rman aux db is at 10.2.0.4
    i have changed auxiliary db to 10.2.0.3 and the problem is resolved.
    but now i am facing some diff. error.
    setup:
    backup server :\\bkpsvr\backup$\
    backup location : \\bkpsvr\backup$\
    target server \\tgt_svr
    auxiliary server :\\aux_svr\ :
    restore location : G:\ORACLE\ORADATA\ERPBI2DV\
    during duplicate db commad while reading from backup piece it is givnig following error.
    ORA-19870: error reading backup piece \\BRNORA10\BACKUP$\BI2\DF_ERPBI2_654625830_4599_1
    ORA-19504: failed to create file "G:\ORACLE\ORADATA\ERPBI2DV\OWB_ERPBI2DV_01"
    ORA-27040: file create error, unable to create file
    OSD-04002: unable to open file
    O/S-Error: (OS 3) The system cannot find the path specified.
    released channel: d1
    RMAN-00571: ==============================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ======================================
    RMAN-03002: failure of Duplicate Db command at 05/14/2008 12:39:14
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 100 found to restore
    RMAN-06023: no backup or copy of datafile 99 found to restore
    please help.
    Message was edited by:
    mits

  • RMAN DUPLICATE  FAIL

    hi guru's
    i am duplicating database using RMAN from ORCL to DUP
    i having the following error
    RMAN-03002: failure of Duplicate Db command at 11/05/2007 11:38:34
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    i used the command for duplicate as follows
    DUPLICATE TARGET DATABASE TO DUP;
    please help me....gurus

    hi,
    I assume you are using a recovery catalog?
    Have you created proper password files on both servers?
    what connection string are you using to connect to the recovery catalog
    something similar to
    connect to the recovery catalog as follows: -
    rman catalog_name rman/[email protected]_name target system/password auxiliary internal/[email protected]$SID
    regards
    ALan

Maybe you are looking for

  • Change Order of key figures

    Hi Gurus, We are using BI 7.0. & MS excel 2003 & 2007 both. I've designed a query with 10 Key figures. After execution, based on Key figures I have Added Local Formula in query. Now I want to change the order of Key Figures and bring Newly added Loca

  • Power Mac G5 won't boot with Lion?

    After installing Lion, my early Intel 2010 Power Mac G5 won't boot. There were no problems for the first 2 days. The third day my G5 wouldn't boot at all. Not using Lion's recovery function, many attempts to boot from a previous system disk, and fire

  • Tranfser from demand management to SOP

    Hello All, is it possible to send  data from demand management (eg.MD61) to SOP - standard information structure S076 or flexible planning ? The idea is to put values directly to MD61 and use them later in flexible planning thanks a lot KS

  • Issues with photo album

    Ever since I upgraded to ios7, I cannot access my photos anymore. As soon as I hit the photo icon, the ipad mini freezes and I cannot do anything with it untill it reboots by itself. Even tried to force a reboot and it does do anything.

  • When accessed from Firewall, the OSB WSDL is inserting schemalocation with HTTP port instead of HTTPS

    We have OSB service and we are able to access over firewall. Also the WSDL, Schemas etc., But when we external users access the WSDL, they are not able to get complete content i.e schemas are not imported. Reason is WSDL has http (<import schemaLocat