Rman error when called from cron

i am using the command below submitted to crontab:
30 9 * * rman target "abc/pass@group1" rcvcat "xyz/pass@group2" cmdfile "/mydir/abc"
i get error rman-00569
lem-00031
lem-00033
when i just type the rman command without using crontab it runs...
i am at a loss please help
thanks

You could try to set the enviroment with something like:-
30 5 * * * su - oracle -c rman...........
HTH
PS. The .profile must be executable in a non-interactive mode as there is no terminal associated when called by CRON. Maybe the profile could check this using the stty command.

Similar Messages

(Rfc) error when called from bitztalk side

Hello,
I developed an RFC for payroll posting .RFC is working properly at R/3 end, But it is throwing an error "Control Framework: Fatal error - GUI cannot be reached" when it is called from Biztalk side.
Thanks in advance.
venu.

You could try to set the enviroment with something like:-
30 5 * * * su - oracle -c rman...........
HTH
PS. The .profile must be executable in a non-interactive mode as there is no terminal associated when called by CRON. Maybe the profile could check this using the stty command.

Xcelsius Error when Calling from 1 DB to another in BOE

I am trying to link two dashboards(parent and Child), and am getting the error "404 page cannot be displayed"
"documentDownload?iDocID=38732&sKind=Flash"
When I call the 2nd dashboard from 1st from BOE, the updated Link is:( this link gives me the error: "404 not found")
http://<BO Server>/Xcelsius/jsp/Flash_View/documentDownload?iDocID=38732&sKind=Flash
I manually modified the link and tried to open the SWF file it worked.
http://<BO Server>/Xcelsius/opendoc/documentDownload?iDocID=38732&sKind=Flash
Do I have to make any changes in the Server for this to work. Please Help.
PS: I used the opendoc link and it worked, but, when I migrate the Dashboard from Dev to QA/PROD. Opendoc link will point to the same server after the migration.

Try to use the following URL:
/OpenDocument/opendoc/openDocument.jsp?iDocID=38732&sKind=Flash
Just ommit the http://hostname part.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Feb 10, 2011 7:42 PM

JCo error when calling from webmethods sap adapter to SAP BAPI

Hi,
I am getting an error "[SAP.102.9000] JCo error: (104) RFC_ERROR_SYSTEM_FAILURE - connection closed without message (CM_NO_DATA_RECEIVED)" when webmethods sap adapter is calling BAPI in SAP. The BAPI is working fine in SAP.
Can anyone suggest me a possible solution.
Thanks,
Sarath.

BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm

Shell Script gives error when run through cron job.

Hi,
The following shell script runs without any problem when executed manulally.
USED=$(df -h /arch | tail -1 | awk '{print $5}' | cut -d '%' -f 1)
if [ ${USED} -gt 90 ]
then
find /arch/AUBUAT/ -type f -mtime +0 | xargs rm
find /arch/AUBMIG/ -type f -mtime +0 | xargs rm
fi
But the same gives below error when called from a cron job:
/backup/arch_test.sh: syntax error at line 1: `USED=$' unexpected
We are running following version:
bash-3.00$ uname -a
SunOS uaeaubdbdr01.aub.af 5.10 Generic_141444-09 sun4u sparc SUNW,SPARC-Enterprise
Kindly assist.
Thanks
Edited by: user13362786 on Apr 20, 2011 4:36 AM

Hi,
When I used #!/usr/bin/sh now even the manul execution of the script fails with the same err:
bash-3.00$ ./arch_test.sh
./arch_test.sh: syntax error at line 2: `USED=$' unexpected
And when I used #!/usr/bin/ksh the manual execution runs fine but again when the script is run from cronjob it now give dirrect err:
/backup/arch_test.sh[2]: df: not found
/backup/arch_test.sh[2]: tail: not found
/backup/arch_test.sh[2]: cut: not found
/backup/arch_test.sh[2]: awk: not found
/backup/arch_test.sh[3]: test: argument expected

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

An error when calling DAQmx from TestStand

Hi,
I get very mystic error when calling DAQmx Create Channel (Digital input) and DAQmx Read (Digital Bool 1Line 1Point) vis. Difficulty is that it does not occur every time. It is random. Any ideas what might cause this error? I uninstalled Traditional DAQ drives because they are not in use but it does not help.
Please, see attachment.
BR,
Jick
Attachments:
daqerror.PNG ‏80 KB

Here is some additional information. See attachments.
I can not get that error using MAX or looping it only. There is something else outside which causes the error. It can not be Traditional DAQ because I uninstalled it. These vis are running in a loop during the test in the batchmodel.
BR,
Jick
Attachments:
daqerror2.PNG ‏33 KB
daqerror3.PNG ‏15 KB

I run windows 7/8 and lightroom 5.7 i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly. What do I need to do to fix it.

I run windows 7/8 and lightroom 5.7 I am getting an error message and here it is " lightroom encountered an error when reading from its preview cache and needs t quit" How do I fix this.

THANKS
Hank Wilkinson
Please visit my web site <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
For information on any of these photos please email me or call 612-756-9970

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

ORA-03115 error when calling a Stored Procedure

Hi All,
I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR resprows[50][3998];
int numret = 0;
int numrows= 50;
int done= 0;
unsigned long resp_id = 0;
EXEC SQL END DECLARE SECTION;
EXEC SQL AT DB_NAME EXECUTE
BEGIN pkg_something.getdata(
:resp_id, /* IN */
:numrows, /* IN */
:done, /* OUT */
:resprows, /* OUT */
:numret /* OUT */
END;
END-EXEC;
The stored procedure basically uses the resp_id value to select rows from a table;
in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
There may be anything from 1 to numrows returned from the SP.
Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
This all works chipper on NT.
Any ideas?
Thanks in advance,
Nigel.
PS: The database the app is talking to is still hosted on NT.
null

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

JAX-WS client error when calling web method

My JAX-WS client is getting the following error when calling a web method:
Exception in thread "main" javax.xml.ws.WebServiceException:
No Content-type in the header!
I'm using Eclipse as my development environment. I use the CXF facet to generate a WSDL from Java code. I then use the New -> Web Service Client to generate client side code from the WSDL.
The following fully describes my environment:
Windows XP
JDK 1.6.0_22
Java EE 6
Eclipse Helios
Apache CXF 2.3.0 (runtime)
Tomcat 6.0
I have found several post on the net that describe this problem and a solution for JBoss, but I have been unable to find anything that addresses this error on Tomcat.
I can provide source code if needed. The app is a simple Hello World web service. I'm using it to try and get familiar with developing web services with all the components listed above.
Thanks

Hi Anders,
The resolution of the crossdomain problem is not to store an cross-domain-policy file at the [SAP] webservice side; but instead it needs to be done at the (every...) webservice client. In case the client is an IIS based webapplication (and thus the ultimate end-users are accessing it via their browser), this is not such an issue. It there is sufficient to put an crossdomain.xml policy file in the IIS main virtual root of your 'client' .net webapplication (c:\inetpub\wwwroot). It also can be required or at least helpful to put a clientaccesspolicy.xml file; both at the main virtual root and in the virtual root of the specific webapplication
In case of SharePoint application, the crossdomain.xml file must be stored in the WSS virtual root of that site; c:\inetpub\wwwroot\wss\virtualdirectories\<your SharePoint webapp>
Best regards, William.

IGS error (: Error When Calling Up IGS (ListenerRfc: unknown error))

Hi,
We have recently upgraded to NW04S.
Most of our BW reports( SAP delivered or custom, web template or not ) work fine with the IGS, while some reports don't, We receive a message from the Enterprise Portal ( Error When Calling Up IGS (ListenerRfc: unknown error)). No other details are available
We have checked and found out the related web templates are actually activates properly. From the same business content, we find some repports work and some don't, all however use web template.
Has anybody expoerienced the same? Please help.
   Thanks
Arunava

Hi AHP,
   1> BW_IGS_ADMIN when executed showed me some charts with some statictics and status etc. However as mentioned the other report BW_IGS_CHART_TEST just shows me a blank screen.
    2> SM59 connection test for the IGS RFC IGS_RFC_DEST is successful
    3> Ping on the Gateway Host( for the RFS dest) works fine as well.
    4> Also as I mentioned earlier, some of the reports using web teamplate works fine where some are not.
    5> when I do the RFC trace ( since I get an "Error When Calling Up IGS (ListenerRfc: unknown error) ) via ST01 for the query , in the BI sysatem, I get an error 'Prog:CL_IGS_CHART==================CPRow:'.
   Please let me know how do I proceed further.
Thanks
Arunava

Rman error when called from cron

Similar Messages

Maybe you are looking for