RMAN Parameter configuration errors
I am trying to run the following script to set configuration parameters for rman:
rman <<!!
connect rcvcat rman/${RMAN_PWD}@${RMANCAT}
connect target /
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 15 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/app/oracle
/backups/RMAN/${SID}/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/u03/app/oracle/backups/RMAN/${SID}
/backup_db_%d_S_%s_P_%p_T_%t' MAXPIECESIZE 1024m;
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '/u03/app/oracle/backups/RMAN/${SID}
/backup_db_%d_S_%s_P_%p_T_%t' MAXPIECESIZE 1024m;
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/flash_recovery_area/${SI
D}/snapcf_ev.f';
for some reason I get the errors...
for CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "backup": expecting one of: ";"
RMAN-01007: at line 1 column 42 file: standard input
and for CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "identifier": expecting one of: "backup"
RMAN-01008: the bad identifier was: DELETION
RMAN-01007: at line 1 column 22 file: standard input
I can't find anything wrong with the syntax in the script, but I'm fairly new to this stuff so I could just be missing something. Does anyone know what could be causing these errors?
I just realized that I was running this script against 9i instances. The script is meant to be run against 10g instances and worked fine when I did so. I guess I'll have to adjust the script accordingly for 9i.
Similar Messages
-
Good Morning All,
One of our RMAN backups is failing with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Edited by: ORA_UMAIR on Dec 31, 2008 7:51 AMThis Oracle Database is 9.2.0.6.0. Here is the complete log file. The RMAN script that I am using ran successfully many times before.
====================================================================================================
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: CUSTPR (DBID=525071053)
RMAN>
RMAN> #########################################################################
2> # LEVEL 0 BACKUP #
3> #########################################################################
4>
5> # Configure backups to be written to disk.
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Set the retention policy to a recovery window of 7 days. This ensures that
2> # RMAN retains all backups needed to recover the database to any point in time
3> # in the last 7 days. You can use the DELETE OBSOLETE command to delete
4> # backups that are no longer required by the retention policy. To exclude a
5> # backup from consideration by the policy, you can use KEEP option with the
6> # BACKUP command.
7> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to use two disk channels for backup, restore, recovery, and
2> # maintenance operations.
3> CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write disk backups to the /backup directory.
2> # The format specifier %t is replaced with a 4-byte timestamp, %s with the
3> # backup set number, and %p with the backup piece number.
4> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to back up the control file after each backup.
2> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write controlfile autobackups to the /backup directory.
2> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Enable the backup optimization feature introduced in 9i to make sure that
2> # RMAN won't backup an archivelog or datafile if there already exists a backup
3> # of that file. The FORCE option can be used to override optimization on a
4> # specific BACKUP command.
5> CONFIGURE BACKUP OPTIMIZATION ON;
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Use the SHOW ALL command to see the current configuration settings.
2> SHOW ALL ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%d_bkp_cf%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' FORMAT '%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/orahome2/custprdb/9.2.0/dbs/snapcf_custpr.f'; # default
RMAN>
RMAN> # The following commands are run each day to start the backup cycle.
2> # The steps are:
3> # - Take an incremental level 0 backup of the database. A level 0 backup is
4> # a complete backup of the entire file which can be used as the basis
5> # for a subsequent incremental backup.
6> # - Backup all archivelogs that have not already been backed up.
7> # - Delete on-disk archivelogs older than seven days.
8>
9> BACKUP INCREMENTAL LEVEL 0 FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p'
10> DATABASE maxsetsize 33G
11> PLUS ARCHIVELOG FORMAT '/backups/admin/custpr/%d_bkp_al%t_Set%s_Piece%p'
12> delete all input;
Starting backup at 12/30/2008 22:01:40
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=8008 recid=7910 stamp=674638862
input archive log thread=1 sequence=8009 recid=7911 stamp=674671207
input archive log thread=1 sequence=8010 recid=7912 stamp=674697380
input archive log thread=1 sequence=8011 recid=7913 stamp=674780433
input archive log thread=1 sequence=8012 recid=7914 stamp=674784211
input archive log thread=1 sequence=8013 recid=7915 stamp=674863288
input archive log thread=1 sequence=8014 recid=7916 stamp=674863300
channel ORA_DISK_1: starting piece 1 at 12/30/2008 22:01:41
channel ORA_DISK_1: finished piece 1 at 12/30/2008 22:03:47
piece handle=/backups/admin/custpr/CUSTPR_bkp_al674863300_Set3083_Piece1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:07
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/custpr/arch/arch_custpr_8008.log recid=7910 stamp=674638862
archive log filename=/custpr/arch/arch_custpr_8009.log recid=7911 stamp=674671207
archive log filename=/custpr/arch/arch_custpr_8010.log recid=7912 stamp=674697380
archive log filename=/custpr/arch/arch_custpr_8011.log recid=7913 stamp=674780433
archive log filename=/custpr/arch/arch_custpr_8012.log recid=7914 stamp=674784211
archive log filename=/custpr/arch/arch_custpr_8013.log recid=7915 stamp=674863288
archive log filename=/custpr/arch/arch_custpr_8014.log recid=7916 stamp=674863300
Finished backup at 12/30/2008 22:03:47
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Recovery Manager complete. -
'Conversion configuration error: Unknown structure
Hi, my scenario is very simple, Proxy->PI->File and there is no mapping.
There is a report that sends all the data to PI with the proxy and that works OK, but when the file adapter must generate the file I get the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'n:WU_MT_BP' found in document', probably configuration error in file adapter (XML parser error)'
The XML can't be wrong because the MT of the proxy service interface is the same that the MT of the file interface.
In the file content conversion I specified all the structures, with fieldFixedLenghts parameter and endSeparator = 'nl'... I checked those parameters too and they look OK too...>>Unknown structure 'n:WU_MT_BP
This looks clearly like a content conversion issue.
In file content conversion for recordset structure,have you specified WU_MT_BP?
Is this tag required or it shouldn't be coming in payload in first place.
It is possible that the occurrence of this tag is optional and you may be specified/not-specified content conversion parameters for it.
Thanks
Aamir -
Configure: error: cannot run C compiled programs.
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error
'configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details'
I have attached portion of the config.log
configure:3739: checking whether the C compiler works
configure:3761: gcc conftest.c >&5
configure:3765: $? = 0
configure:3813: result: yes
configure:3816: checking for C compiler default output file name
configure:3818: result: a.out
configure:3824: checking for suffix of executables
configure:3831: gcc -o conftest conftest.c >&5
configure:3835: $? = 0
configure:3857: result:
configure:3879: checking whether we are cross compiling
configure:3887: gcc -o conftest conftest.c >&5
In file included from conftest.c:11:
/usr/include/stdio.h:21:31: sys/feature_tests.h: No such file or directory
In file included from /usr/include/stdio.h:66,
from conftest.c:11:
/usr/include/iso/stdio_iso.h:90: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:208: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:210: error: syntax error before '*' token
In file included from /usr/include/stdio.h:135,
from conftest.c:11:
/usr/include/iso/stdio_c99.h:54: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:54: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:56: error: redefinition of parameter '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:56: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:68: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:68: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:70: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:70: error: previous definition of '_RESTRICT_KYWD' was here
configure:3891: $? = 1
configure:3898: ./conftest
./configure: line 3900: ./conftest: No such file or directory
configure:3902: $? = 127
configure:3909: error: in `/wireshark-1.6.7':
configure:3911: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details934802 wrote:
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error Where did you get this file? -
CJS-30059 Java EE Engine configuration error FCO-00011 The step configCAF
Hallo
trying to install SAP EHP1 for NW 7.0 Developer Workplace for AS Java (no Abap) I get the error:
CJS-30059 Java EE Engine configuration error.
FCO-00011 The step configCAF with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|
configCAF was executed with status ERROR ( Last error reported by the step :Java EE Engine configuration error.
DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Connection reset:: '.).
which is very similar to an error here from October 2008 so I ask if anyone can help?
For me under windows xp on the pc installing the two sap dvd's "SAP EHP1 FOR SAP NETWEAVER 7.0 Developer Workplace"
and "Kernel 7.01" this happens in step 33 of 37 steps.
In sapinst_dev.log just beforehand I see
"NWCallJava: Arguments passed: ROLE=CAFAdmin, ACTIONS=com.sap.caf.rt.caf.auth".
With kind regardsHi Marco
well yes it was very strange ... but it is now installed.
I think I'd better put a question into the main NW forum.
Happily I have someone here who is a genius and found out what was happening ...
1) the port 50000 wasnt useable, wasnt even in the log, but 50001 for https worked, so https:/localhost:50001 worked but http didnt;
2) a parameter "handlePromotionFailure" was used but not understood so the VM couldnt start
3) on top of that, being a huge concern, we have host names longer than the sap limit of 13 characters.
I have tried to assign you 6 points I hope it worked.
With kind regards
David -
Configuration error 3, 6
Hi,
I was using Flash Builder for a while when suddenly it refused to run. When running it gave me the message below:
It was configuration error 6 for several times, but then it switched to error 3. I'm using Flash Builder 4.6 on Windows 7.
Adobe support didn't give any help, they suggested to use adobe forums. Does anyone know how to fix this?
Thanks,
GeorgeHi Borys,
Thanks for your kind reply,
I have installed java-8 on my Window 8 machine, before installation of Weblogic itself and the location of JDK is "C:\Java\jdk1.8.0_25"
And the 'C:\Middleware\SOASuite11gR1PS6\wlserver_10.3\common\bin\commEnv' (windows command script file) contains the correct JAVA_HOME location by default, i.e JAVA_HOME=C:\Java\jdk1.8.0_25
While installing the weblogic serv (64-bit) , I have Opened the command prompt, navigated to the directory containing the Weblogic jar and entered the below command,
C:\Java\jdk1.7.0_35\bin\java -Xmx1024m -jar wls1036_generic.jar And successfully got installed the same.
Now, Do I still need to set the JAVA_HOME parameter on my windows ?
( FYI: when I got my windows8.1 OS with the machine, it is having default jre7 location as "C:\Program Files\Java\jre7\bin")
Thanks,
Rajesh -
How do I fix a Configuration Error on MacBook Pro?
I have a MacBook Pro 2.4 GHz Intel Core i5 with 8 gigs of memory. I was running CS6 and my video board went out. I got it fixed but lost all my data on my hard drive. So I tried installing cs6 from a disk image that I had saved and after entering the serial code I received that my license was revoked. That could be true since I was at another company when I purchased it. Now I'm trying out the TRIAL Adobe cloud solution and after installing and getting updates, when i clicked on the app I get a configuration error when trying to open the . Do I need to delete some library items that are conflicting when I tried to install CS6?
Here is the error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5Imjoewalkerid the file permissions on your SLStore folder have become compromised. Please see Configuration error 16 | CC, CS for information on how to resolve Error 213:5.
-
Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0
Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
When I run the App-V package, I get the License Configuration Error 213:19
Thank You. very much for your time. KarlYou will probably get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
Configuration error when open admin tool in BIEE 11g client
Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AMHi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx, -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Report Viewer Configuration Error
Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SQL Server Reporting Services Configuration Error(Subscription)
I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
--- End of inner exception stack trace ---
Thanks,
RPHi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
Hi, My laptop containing Adobe CS5 recently crashed. I do not have the serial as this was activated at my school and they only do it once for everyone. What I did was to take the HDD out and put it onto my PC and try to use the application from there, a method which worked before on other applications, but when I wanted to load up dreamweaver and any other applications in the suite it failed to load and popped out the following message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Configuration Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error:6
http://www.adobe.com/support/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can anyone help me out? I don't have the serials nor the CD to reinstall so I'm practically stuck and I cant afford to buy the thing again.Adobe applications simply don't work that way. Installation puts software and configuration information not only in application-specific directories under \program files\, but also in system directories. As such, Adobe application installations are not portable.
Unfortunately, in order to re-install your software, you will need to go back to your “school” for installation media and serial number information since the software was licensed through them and not directly via Adobe.
- Dov -
Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: <!--<forms loginUrl="/_layouts/log-in.aspx" />-->
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
Exception type: ConfigurationErrorsException
Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
Request path: /_vti_bin/sitedata.asmx
User host address: 172.16.20.80
User:
Is authenticated: False
Authentication Type:
Thread account name: abc\wss_setup
Thread information:
Thread ID: 1
Thread account name: abc\wss_setup
Is impersonating: False
Stack trace: at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_Authentication()
at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
at System.Web.HttpApplication.InitModulesCommon()
at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advanceHi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue -
[SOLVED] configure: error: cannot run C compiled programs
I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.
Maybe you are looking for
-
Field mapping and value mapping - Basic
Hi, Assuming I have a repository containing a main table with 3 fields 1)Product 2)Description 3)Manufacturer (lookup field) When i map the source file to the destination repository 1) i map fields product and description of the source file and desti
-
My Satellite L300D-10Q never picks up a wireless connection
I have ConfigFree on the laptop and my Netgear router is turned on, but my laptop never picks up anything? It says the laptop has wireless integrated and the switch is turned on with an orange light indicating that. Any help please?
-
Hello All, My requirement is, how to add the Customized Attribute in UME. I got one solution from SDN. So I have defined custom property in ume.admin.addattrs field. But it shows input field. I need a check box instead of input field. How to acheive
-
Missing image in my podcast...
Hello, I was wondering if anyone has help for a missing image on my podcast... I created my podcast feed with a program called "feeder", and submitted the podcast. Apple added the podcast but only displays the "generic" podcast image. When I do an iT
-
How to make this type of image - N00b question
Hi there folks, Just wondering, with illustrator, what would be the easiest way of making an image like the one below? I would like to create my own just to practice on Illustrator and change some of the squares to different colours etc. It's an imag