RMAN - Recover dropped tablespace
I'm kinda new to RMAN. I took full backup using RMAN in archivelog mode database. No RMAN catalog created. I dropped a tablespace using 'including contents and datafiles'. When i try to restore and recover th edropped tablespacespace, i get the following error message.
RMAN> restore datafile 8;
Starting restore at 12-MAY-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=143 devtype=DISK
RMAN-00571: ================================================
RMAN-00569: === ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================
RMAN-03002: failure of restore command at 05/12/2006 13:11:03
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: 8
RMAN> restore tablespace staging;
Starting restore at 12-MAY-06
using channel ORA_DISK_1
RMAN-00571: ================================================
RMAN-00569: ======= ERROR MESSAGE STACK FOLLOWS
RMAN-00571: ============================================
RMAN-03002: failure of restore command at 05/12/2006 13:20:15
RMAN-20202: tablespace not found in the recovery catalog
RMAN-06019: could not translate tablespace name "STAGING"
This is the backlist from RMAN -
=======================================
BS Key Type LV Size Device Type Elapsed Time Completion Time
9 Full 12.99G DISK 00:11:42 02-MAY-06
BP Key: 9 Status: AVAILABLE Compressed: NO Tag: TAG20060502T150458
Piece Name: /oraback/rman_bkups/DCDB_t589388698_s11_p1
List of Datafiles in backup set 9
File LV Type Ckp SCN Ckp Time Name
1 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_system_21cw54nf_.dbf
2 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_undotbs1_21cw54pq_.dbf
3 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_sysaux_21cw54nn_.dbf
4 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_users_21cw54q4_.dbf
5 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_dc_data1_21kfd05y_.dbf
6 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_dc_index_21kfhx45_.dbf
7 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_undotbs1_21mkohp6_.dbf
8 Full 14757459 02-MAY-06
10 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_sysaux_21lbznyy_.dbf
11 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_system_21lc61wl_.dbf
12 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_ddb_data_21mmsbk2_.dbf
13 Full 14757459 02-MAY-06 /oradata/DCDB/datafile/o1_mf_ddb_inde_21mmvx07_.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
10 Full 7.11M DISK 00:00:02 02-MAY-06
BP Key: 10 Status: AVAILABLE Compressed: NO Tag: TAG20060502T150458
Piece Name: /oraback/rman_bkups/DCDB_t589389403_s12_p1
Control File Included: Ckp SCN: 14757761 Ckp time: 02-MAY-06
SPFILE Included: Modification time: 02-MAY-06
===================================
Thanks
~Ash
RMAN-03002: failure of restore command at 05/12/2006 13:11:03RMAN-20201: datafile not found in the recovery catalogRMAN-06010: error while looking up datafile: 8
RMAN-20202: tablespace not found in the recovery catalog
I took full backup using RMAN in archivelog mode database. No RMAN catalog created.As you said "Recovery Catalog is not configured" but its prompting for Recovery Catalog!
Try This % ORACLE_SID=trgt; export ORACLE_SID #trgt means your target database
% rman TARGET / NOCATALOG
hope it should work
Ravi
Similar Messages
-
TSPITR - Recover a Dropped Tablespace aborting due dependency over XDB.
I found an issue using TSPITR to Recover a Dropped Tablespace when XML DB (XDB) is installed on a different tablespace from "SYSAUX".
During execution of TSPITR RMAN use Data Pump to export/import Tablespace Metadata as Data Pump has dependency over XDB views and related objects and XDB is installed on a set of tablespace not included on dummy database then EXPDP fails.
Errors raised ORA-39123, ORA-00376, ORA-01110.
I didn't found any limitation about XDB location on documentation or MoS.
This looks like a Oracle Bug.
See this:
XDB installed on TABLESPACE XDB.
SQL> select owner,tablespace_name
from dba_segments
where owner='XDB'
GROUP BY owner,tablespace_name ;
OWNER TABLESPACE_NAME
XDB XDBDropping Tablespace SOE.
SQL> select to_char(sysdate,'dd-mm-yyyy hh24:mi:ss') actual_date from dual;
ACTUAL_DATE
17-12-2012 11:57:44
SQL> drop tablespace SOE including contents and datafiles;
Tablespace dropped.Restoring Dropped Tablespace.
RMAN> list backup tag TAG20121217T112226;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
69 Full 995.61M DISK 00:02:41 17-12-2012 11:25:07
BP Key: 69 Status: AVAILABLE Compressed: YES Tag: TAG20121217T112226
Piece Name: +DG_16M/prod/backupset/2012_12_17/nnndf0_tag20121217t112226_0.286.802264947
List of Datafiles in backup set 69
File LV Type Ckp SCN Ckp Time Name
1 Full 1628648 17-12-2012 11:22:26 +DS8000_DG/prod/datafile/system.349.799325249
2 Full 1628648 17-12-2012 11:22:26 +DS8000_DG/prod/datafile/sysaux.348.799325249
3 Full 1628648 17-12-2012 11:22:26 +DS8000_DG/prod/datafile/undotbs1.347.799325251
4 Full 1628648 17-12-2012 11:22:26 +DS8000_DG/prod/datafile/users.335.799325251
5 Full 1628648 17-12-2012 11:22:26 +DS8000_DG/prod/datafile/audit_aux.287.799330083
6 Full 1628648 17-12-2012 11:22:26
7 Full 1628648 17-12-2012 11:22:26 +DS8000_DG/prod/datafile/xdb.311.801410833
RMAN>
run{
SET NEWNAME FOR DATAFILE 6 TO "+DS8000_DG";
RECOVER TABLESPACE SOE
UNTIL TIME "to_date('17-12-2012 11:55:00','dd/mm/yyyy hh24:mi:ss')"
AUXILIARY DESTINATION '/u01/app/oracle/flash_recovery_area01/stage_area_tspitr';
executing command: SET NEWNAME
Starting recover at 17-12-2012 12:01:29
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Creating automatic instance, with SID='FCox'
initialization parameters used for automatic instance:
db_name=PROD
db_unique_name=FCox_tspitr_PROD
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr
log_archive_dest_1='location=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr'
#No auxiliary parameter file used
starting up automatic instance PROD
Oracle instance started
Total System Global Area 292278272 bytes
Fixed Size 2220880 bytes
Variable Size 109055152 bytes
Database Buffers 176160768 bytes
Redo Buffers 4841472 bytes
Automatic instance created
List of tablespaces that have been dropped from the target database:
Tablespace SOE
contents of Memory Script:
# set requested point in time
set until time "to_date('17-12-2012 11:55:00','dd/mm/yyyy hh24:mi:ss')";
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 17-12-2012 12:01:46
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=16 device type=DISK
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +DG_16M/prod/autobackup/2012_12_17/s_802265113.276.802265115
channel ORA_AUX_DISK_1: piece handle=+DG_16M/prod/autobackup/2012_12_17/s_802265113.276.802265115 tag=TAG20121217T112513
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:05
output file name=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/controlfile/o1_mf_8dy9ghpz_.ctl
Finished restore at 17-12-2012 12:01:52
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until time "to_date('17-12-2012 11:55:00','dd/mm/yyyy hh24:mi:ss')";
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 2 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 6 to
"+DS8000_DG";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 3, 2, 6;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 17-12-2012 12:01:58
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_undotbs1_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00002 to /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00006 to +DS8000_DG
channel ORA_AUX_DISK_1: reading from backup piece +DG_16M/prod/backupset/2012_12_17/nnndf0_tag20121217t112226_0.286.802264947
channel ORA_AUX_DISK_1: piece handle=+DG_16M/prod/backupset/2012_12_17/nnndf0_tag20121217t112226_0.286.802264947 tag=TAG20121217T112226
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:09:15
Finished restore at 17-12-2012 12:11:13
datafile 6 switched to datafile copy
input datafile copy RECID=5 STAMP=802267873 file name=+DS8000_DG/prod/datafile/soe.487.802267321
datafile 1 switched to datafile copy
input datafile copy RECID=6 STAMP=802267873 file name=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_system_8dy9gs09_.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=7 STAMP=802267873 file name=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_undotbs1_8dy9ov17_.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=8 STAMP=802267873 file name=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_sysaux_8dy9hxsc_.dbf
contents of Memory Script:
# set requested point in time
set until time "to_date('17-12-2012 11:55:00','dd/mm/yyyy hh24:mi:ss')";
# online the datafiles restored or switched
sql clone "alter database datafile 1 online";
sql clone "alter database datafile 3 online";
sql clone "alter database datafile 2 online";
sql clone "alter database datafile 6 online";
# recover and open resetlogs
recover clone database tablespace "SOE", "SYSTEM", "UNDOTBS1", "SYSAUX" delete archivelog;
alter clone database open resetlogs;
executing Memory Script
executing command: SET until clause
sql statement: alter database datafile 1 online
sql statement: alter database datafile 3 online
sql statement: alter database datafile 2 online
sql statement: alter database datafile 6 online
Starting recover at 17-12-2012 12:11:14
using channel ORA_AUX_DISK_1
starting media recovery
archived log for thread 1 with sequence 15 is already on disk as file +DG_16M/prod/archivelog/2012_12_17/thread_1_seq_15.277.802267317
channel ORA_AUX_DISK_1: starting archived log restore to default destination
channel ORA_AUX_DISK_1: restoring archived log
archived log thread=1 sequence=14
channel ORA_AUX_DISK_1: reading from backup piece +DG_16M/prod/backupset/2012_12_17/annnf0_tag20121217t112512_0.264.802265113
channel ORA_AUX_DISK_1: piece handle=+DG_16M/prod/backupset/2012_12_17/annnf0_tag20121217t112512_0.264.802265113 tag=TAG20121217T112512
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr/1_14_801941068.dbf thread=1 sequence=14
channel clone_default: deleting archived log(s)
archived log file name=/u01/app/oracle/flash_recovery_area01/stage_area_tspitr/1_14_801941068.dbf RECID=141 STAMP=802267877
archived log file name=+DG_16M/prod/archivelog/2012_12_17/thread_1_seq_15.277.802267317 thread=1 sequence=15
media recovery complete, elapsed time: 00:00:01
Finished recover at 17-12-2012 12:11:19
database opened
contents of Memory Script:
# make read only the tablespace that will be exported
sql clone 'alter tablespace SOE read only';
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/u01/app/oracle/flash_recovery_area01/stage_area_tspitr''";
# create directory for datapump export
sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/u01/app/oracle/flash_recovery_area01/stage_area_tspitr''";
executing Memory Script
sql statement: alter tablespace SOE read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/u01/app/oracle/flash_recovery_area01/stage_area_tspitr''
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/u01/app/oracle/flash_recovery_area01/stage_area_tspitr''
Performing export of metadata...
EXPDP> Starting "SYS"."TSPITR_EXP_FCox":
EXPDP> ORA-39123: Data Pump transportable tablespace job aborted
ORA-00376: file 7 cannot be read at this time
ORA-01110: data file 7: '+DS8000_DG/prod/datafile/xdb.311.801410833'
Removing automatic instance
shutting down automatic instance
database closed
database dismounted
Oracle instance shut down
Automatic instance removed
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_temp_8dyb0qok_.tmp deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/onlinelog/o1_mf_3_8dyb0kfp_.log deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/onlinelog/o1_mf_2_8dyb0fm9_.log deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/onlinelog/o1_mf_1_8dyb07xv_.log deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_sysaux_8dy9hxsc_.dbf deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_undotbs1_8dy9ov17_.dbf deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/datafile/o1_mf_system_8dy9gs09_.dbf deleted
auxiliary instance file /u01/app/oracle/flash_recovery_area01/stage_area_tspitr/PROD/controlfile/o1_mf_8dy9ghpz_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/17/2012 12:12:19
RMAN-06962: Error received during export of metadata
RMAN-06965: Datapump job has stopped
RMAN-06960: EXPDP> Job "SYS"."TSPITR_EXP_FCox" stopped due to fatal error at 12:12:02
RMAN>If I drop tablespace SOE and XDB on Target database and try to restore both (SOE,XDB) export will succeeds but during IMPORT Metadata RMAN will faill due XDB dependency.
In my view, they (mean Oracle) need find way to include XDB Tablespace at DUMMY database only to export (EXPDP) Metadata purposes.
If someone get a workaround for this error will be grateful.
P.S: This is not a Production environment and will soon open a SR on Oracle Support.Hi Michael,
I did not find solution to use TSPITR to recover dropped tablespace if XML DB is installed in a non-default tablespace (i.e outside of SYSAUX).
As far I could understand, the only way to perform this RESTORE is using the old fashion. By creating clone database excluding all unnecessary tablespace, exporting and importing metadata from desired tablespace manually.
Since Oracle has not solved the issue I created my own workaround.
@All
If someone is able to use TSPITR to restore dropped tablespace when XDB is installed in a non-default tablespace, please let me know!!!
The procedure below is supported on All Oracle Version since 10.1 until 11.2.
I DON'T RECOMMEND to create AUXILIARY (clone) database using the same server from TARGET because you can damage the TARGET database.
On this example I'm using same server.
See this example:
### ON TARGET DATABASE
SQL> select count(1) SEG_COUNT from dba_segments where tablespace_name='SOE';
SEG_COUNT
32
SQL> ! date
Wed Dec 19 15:08:11 GMT-02:00 2012
SQL> drop tablespace soe including contents and datafiles;
Tablespace dropped.
### CHECK TABLESPACE TO BE EXCLUDED FROM RESTORE
SQL> select tablespace_name
from dba_tablespaces
where tablespace_name not in ('SYSTEM','SYSAUX','UNDOTBS1','SOE','XDB','TEMP');
TABLESPACE_NAME
USERS
AUDIT_AUX
### CHECK BACKUP ON TARGET DATABASE
RMAN> list backup completed between "sysdate-1" and "sysdate";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
95 Full 986.56M DISK 00:03:18 19-12-2012 14:41:59
BP Key: 95 Status: AVAILABLE Compressed: YES Tag: TAG20121219T143840
Piece Name: /fra/PROD/backupset/2012_12_19/o1_mf_nnndf_TAG20121219T143840_8f3vdn3q_.bkp
List of Datafiles in backup set 95
File LV Type Ckp SCN Ckp Time Name
1 Full 1675258 19-12-2012 14:38:42 +DS8000_DG/prod/datafile/system.349.799325249
2 Full 1675258 19-12-2012 14:38:42 +DS8000_DG/prod/datafile/sysaux.348.799325249
3 Full 1675258 19-12-2012 14:38:42 +DS8000_DG/prod/datafile/undotbs1.347.799325251
4 Full 1675258 19-12-2012 14:38:42 +DS8000_DG/prod/datafile/users.335.799325251
5 Full 1675258 19-12-2012 14:38:42 +DS8000_DG/prod/datafile/audit_aux.287.799330083
6 Full 1675258 19-12-2012 14:38:42
7 Full 1675258 19-12-2012 14:38:42 +DS8000_DG/prod/datafile/xdb.311.801410833
BS Key Size Device Type Elapsed Time Completion Time
96 1.16M DISK 00:00:00 19-12-2012 14:42:08
BP Key: 96 Status: AVAILABLE Compressed: YES Tag: TAG20121219T144208
Piece Name: /fra/PROD/backupset/2012_12_19/o1_mf_annnn_TAG20121219T144208_8f3vm0k3_.bkp
List of Archived Logs in backup set 96
Thrd Seq Low SCN Low Time Next SCN Next Time
1 8 1675198 19-12-2012 14:38:25 1675365 19-12-2012 14:42:07
BS Key Type LV Size Device Type Elapsed Time Completion Time
97 Full 7.52M DISK 00:00:02 19-12-2012 14:42:11
BP Key: 97 Status: AVAILABLE Compressed: NO Tag: TAG20121219T144209
Piece Name: /fra/PROD/autobackup/2012_12_19/o1_mf_s_802449729_8f3vm2cc_.bkp
SPFILE Included: Modification time: 19-12-2012 14:36:30
SPFILE db_unique_name: PROD
Control File Included: Ckp SCN: 1675376 Ckp time: 19-12-2012 14:42:09
RMAN>
### PREPARING ENV
cp $ORACLE_HOME/dbs/orapwprod $ORACLE_HOME/dbs/orapwtspitr
cd $ORACLE_HOME/dbs
## Creating INIT from TSPITR Instance
vi inittspitr.ora
DB_NAME=prod
DB_UNIQUE_NAME=tspitr
CONTROL_FILES=/stage_area_tspitr/PROD/controlfile/control01.ctl
REMOTE_LOGIN_PASSWORDFILE=exclusive
COMPATIBLE =11.2.0
DB_BLOCK_SIZE=8192
memory_target=700M
streams_pool_size=100M
### creating stage area to deploy database
mkdir -p /fra/stage_area_tspitr/PROD
cd /fra/stage_area_tspitr/PROD
mkdir controlfile datafile onlinelog
#### RESTORING DATABASE TSPITR
export ORACLE_SID=tspitr
$ rman target /
RMAN> startup nomount
Oracle instance started
Total System Global Area 730714112 bytes
Fixed Size 2225088 bytes
Variable Size 553651264 bytes
Database Buffers 167772160 bytes
Redo Buffers 7065600 bytes
RMAN> restore controlfile from '/fra/PROD/autobackup/2012_12_19/o1_mf_s_802449729_8f3vm2cc_.bkp';
Starting restore at 19-12-2012 15:16:27
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=146 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
output file name=/fra/stage_area_tspitr/PROD/controlfile/control01.ctl
Finished restore at 19-12-2012 15:16:31
RMAN> startup mount
database is already started
database mounted
released channel: ORA_DISK_1
### REPORT SCHEMA TO GET DATAFILE NUMBER TO BE RESTORED
RMAN> report schema;
RMAN-06139: WARNING: control file is not current for REPORT SCHEMA
Report of database schema for database with db_unique_name TSPITR
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1 700 SYSTEM *** +DS8000_DG/prod/datafile/system.349.799325249
2 600 SYSAUX *** +DS8000_DG/prod/datafile/sysaux.348.799325249
3 200 UNDOTBS1 *** +DS8000_DG/prod/datafile/undotbs1.347.799325251
4 5 USERS *** +DS8000_DG/prod/datafile/users.335.799325251
5 100 AUDIT_AUX *** +DS8000_DG/prod/datafile/audit_aux.287.799330083
6 0 SOE *** +DS8000_DG/tspitr/datafile/soe.368.802445265
7 100 XDB *** +DS8000_DG/prod/datafile/xdb.311.801410833
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1 385 TEMP 32767 +DS8000_DG/prod/tempfile/temp.300.799325437
RMAN>
### GET LOGFILE NAME to RENAME to new location.
$ sqlplus / as sysdba
SQL> select member from v$logfile;
MEMBER
+DS8000_DG/prod/onlinelog/group_1.330.802352807
+DS8000_DG/prod/onlinelog/group_2.331.802352815
+DS8000_DG/prod/onlinelog/group_3.321.802352821
run {
set newname for datafile 1 to '/fra/stage_area_tspitr/PROD/datafile/datafiles_%U';
set newname for datafile 2 to '/fra/stage_area_tspitr/PROD/datafile/datafiles_%U';
set newname for datafile 3 to '/fra/stage_area_tspitr/PROD/datafile/datafiles_%U';
set newname for datafile 7 to '/fra/stage_area_tspitr/PROD/datafile/datafiles_%U';
set newname for datafile 6 to "+DS8000_DG";
restore datafile 1,2,3,7,6 from tag 'TAG20121219T143840' ;
switch datafile 1;
switch datafile 2;
switch datafile 3;
switch datafile 7;
switch datafile 6;
switch tempfile all;
set until time "to_date('19-12-2012 14:42:00','dd-mm-yyyy hh24:mi:ss')";
recover database SKIP TABLESPACE "USERS", "AUDIT_AUX" delete archivelog;
## Renaming ONLINELOG
sql "alter database rename file ''+DS8000_DG/prod/onlinelog/group_1.330.802352807'' to ''/fra/stage_area_tspitr/PROD/onlinelog/group1.rdo''";
sql "alter database rename file ''+DS8000_DG/prod/onlinelog/group_2.331.802352815'' to ''/fra/stage_area_tspitr/PROD/onlinelog/group2.rdo''";
sql "alter database rename file ''+DS8000_DG/prod/onlinelog/group_3.321.802352821'' to ''/fra/stage_area_tspitr/PROD/onlinelog/group3.rdo''";
alter database open resetlogs;
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 19-12-2012 15:32:13
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-SYSTEM_FNO-1
channel ORA_DISK_1: restoring datafile 00002 to /fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-SYSAUX_FNO-2
channel ORA_DISK_1: restoring datafile 00003 to /fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-UNDOTBS1_FNO-3
channel ORA_DISK_1: restoring datafile 00007 to /fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-XDB_FNO-7
channel ORA_DISK_1: restoring datafile 00006 to +DS8000_DG
channel ORA_DISK_1: reading from backup piece /fra/PROD/backupset/2012_12_19/o1_mf_nnndf_TAG20121219T143840_8f3vdn3q_.bkp
channel ORA_DISK_1: piece handle=/fra/PROD/backupset/2012_12_19/o1_mf_nnndf_TAG20121219T143840_8f3vdn3q_.bkp tag=TAG20121219T143840
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:12:35
Finished restore at 19-12-2012 15:44:48
datafile 1 switched to datafile copy
input datafile copy RECID=6 STAMP=802453489 file name=/fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-SYSTEM_FNO-1
datafile 2 switched to datafile copy
input datafile copy RECID=8 STAMP=802453489 file name=/fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-SYSAUX_FNO-2
datafile 3 switched to datafile copy
input datafile copy RECID=10 STAMP=802453489 file name=/fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-UNDOTBS1_FNO-3
datafile 7 switched to datafile copy
input datafile copy RECID=12 STAMP=802453489 file name=/fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-XDB_FNO-7
datafile 6 switched to datafile copy
input datafile copy RECID=14 STAMP=802453489 file name=+DS8000_DG/tspitr/datafile/soe.304.802452733
renamed tempfile 1 to /fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-TEMP_FNO-1 in control file
executing command: SET until clause
Starting recover at 19-12-2012 15:44:49
using channel ORA_DISK_1
Executing: alter database datafile 4 offline
Executing: alter database datafile 5 offline
starting media recovery
archived log for thread 1 with sequence 8 is already on disk as file +DS8000_DG/prod/onlinelog/group_2.331.802352815
archived log file name=+DS8000_DG/prod/onlinelog/group_2.331.802352815 thread=1 sequence=8
media recovery complete, elapsed time: 00:00:02
Finished recover at 19-12-2012 15:44:55
sql statement: alter database rename file ''+DS8000_DG/prod/onlinelog/group_1.330.802352807'' to ''/fra/stage_area_tspitr/PROD/onlinelog/group1.rdo''
sql statement: alter database rename file ''+DS8000_DG/prod/onlinelog/group_2.331.802352815'' to ''/fra/stage_area_tspitr/PROD/onlinelog/group2.rdo''
sql statement: alter database rename file ''+DS8000_DG/prod/onlinelog/group_3.321.802352821'' to ''/fra/stage_area_tspitr/PROD/onlinelog/group3.rdo''
database opened
## Exporting Tablespace Metadata
RMAN >
run {
sql 'alter tablespace SOE read only';
# create directory for datapump export
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''/fra/stage_area_tspitr''";
# grant on directory to SYSTEM
sql "grant read,write on directory TSPITR_DIROBJ_DPDIR to system";
# exporting metadata
host "expdp system/oracle@localhost:1521/tspitr DIRECTORY=TSPITR_DIROBJ_DPDIR DUMPFILE=exp_transport_soe.dmp TRANSPORT_FULL_CHECK=Y TRANSPORT_TABLESPACES=SOE";
using target database control file instead of recovery catalog
sql statement: alter tablespace SOE read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/fra/stage_area_tspitr''
sql statement: grant read,write on directory TSPITR_DIROBJ_DPDIR to system
Export: Release 11.2.0.3.0 - Production on Wed Dec 19 15:53:02 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, Oracle Label Security, OLAP,
Data Mining, Oracle Database Vault and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_TRANSPORTABLE_01": system/********@localhost:1521/tspitr DIRECTORY=TSPITR_DIROBJ_DPDIR DUMPFILE=exp_transport_soe.dmp TRANSPORT_FULL_CHECK=Y TRANSPORT_TABLESPACES=SOE
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/TABLE
Processing object type TRANSPORTABLE_EXPORT/INDEX/INDEX
Processing object type TRANSPORTABLE_EXPORT/INDEX/FUNCTIONAL_INDEX/INDEX
Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/CONSTRAINT
Processing object type TRANSPORTABLE_EXPORT/INDEX_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/REF_CONSTRAINT
Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
Master table "SYSTEM"."SYS_EXPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_TRANSPORTABLE_01 is:
/fra/stage_area_tspitr/exp_transport_soe.dmp
Datafiles required for transportable tablespace SOE:
+DS8000_DG/tspitr/datafile/soe.304.802452733
Job "SYSTEM"."SYS_EXPORT_TRANSPORTABLE_01" successfully completed at 15:54:28
host command complete
## Stop Database and destroy it to make sure that Datafile 6 will not be used by this database;
RMAN>
run {
shutdown immediate;
## removing controlfile and SYSTEM Tablespace to make sure that database will not be opened
host "rm -f /fra/stage_area_tspitr/PROD/controlfile/control01.ctl /fra/stage_area_tspitr/PROD/datafile/datafiles_data_D-PROD_TS-SYSTEM_FNO-1";
database closed
database dismounted
Oracle instance shut down
host command complete
## TARGET Database
## Plugging Tablespace on TARGET database.
$ export ORACLE_SID=prod
$ rman target /
run {
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''/fra/stage_area_tspitr''";
# grant on directory to SYSTEM
sql "grant read,write on directory TSPITR_DIROBJ_DPDIR to system";
host "impdp system/oracle@localhost:1521/prod DIRECTORY=TSPITR_DIROBJ_DPDIR DUMPFILE=exp_transport_soe.dmp TRANSPORT_DATAFILES=''+DS8000_DG/tspitr/datafile/soe.304.802452733''";
sql "alter tablespace soe read write";
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/fra/stage_area_tspitr''
sql statement: grant read,write on directory TSPITR_DIROBJ_DPDIR to system
Import: Release 11.2.0.3.0 - Production on Wed Dec 19 16:09:30 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, Oracle Label Security, OLAP,
Data Mining, Oracle Database Vault and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_TRANSPORTABLE_01": system/********@localhost:1521/prod DIRECTORY=TSPITR_DIROBJ_DPDIR DUMPFILE=exp_transport_soe.dmp TRANSPORT_DATAFILES=+DS8000_DG/tspitr/datafile/soe.304.802452733
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/TABLE
Processing object type TRANSPORTABLE_EXPORT/INDEX/INDEX
Processing object type TRANSPORTABLE_EXPORT/INDEX/FUNCTIONAL_INDEX/INDEX
Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/CONSTRAINT
Processing object type TRANSPORTABLE_EXPORT/INDEX_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/REF_CONSTRAINT
Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
Job "SYSTEM"."SYS_IMPORT_TRANSPORTABLE_01" successfully completed at 16:10:03
host command complete
sql statement: alter tablespace soe read write
### Recompiling Invalid Objects and Checking objects from tablespace SOE
$ sqlplus / as sysdba
SQL> @$ORACLE_HOME/rdbms/admin/utlrp.sql
TIMESTAMP
COMP_TIMESTAMP UTLRP_BGN 2012-12-19 16:10:34
OBJECTS WITH ERRORS
0
ERRORS DURING RECOMPILATION
0
Function created.
PL/SQL procedure successfully completed.
Function dropped.
PL/SQL procedure successfully completed.
SQL> select count(1) SEG_COUNT from dba_segments where tablespace_name='SOE';
SEG_COUNT
32
SQL> SELECT COUNT(1) OBJ_INVALID FROM DBA_OBJECTS WHERE STATUS != 'VALID';
OBJ_INVALID
0
## PERFORM A FULL BACKUP AFTER RESTORE TABLESPACE.Regards,
Levi Pereira -
Can I recover some tablespace(only current tbs) - RMAN
Hello, I have ang question about RMAN.
If I have full backup database, and next time database is failed.
Can I recover especially tablespace current data?
this below is my step recovery but it's not pass.
I'm not sure, this are correct or not.
bash-2.05$ rman target / catalog user/password@rcat
RMAN> set dbid=1707756540
RMAN> startup nomount
+RMAN> run{+
+2> ALLocate channel ch00 type 'SBT_TAPE';+
+3> Allocate channel ch01 type 'SBT_TAPE';+
+4> SEND 'NB_ORA_CLIENT=holtuv1';+
+5> SEND 'NB_ORA_SERV=holtbk11';+
+6> SEND 'NB_ORA_POLICY=test_orabk_holtuv1';+
+7> restore controlfile ;+
+8> }+
+RMAN> run{+
+2> ALLocate channel ch00 type 'SBT_TAPE';+
+3> Allocate channel ch01 type 'SBT_TAPE';+
+4> SEND 'NB_ORA_CLIENT=holtuv1';+
+5> SEND 'NB_ORA_SERV=holtbk11';+
+6> SEND 'NB_ORA_POLICY=test_orabk_holtuv1';+
+7> restore database skip tablespace 'PERFSTAT', 'YEAR2009';+
+8> }+
RMAN> alter database mount;
+RMAN> run{+
+2> ALLocate channel ch00 type 'SBT_TAPE';+
+3> Allocate channel ch01 type 'SBT_TAPE';+
+4> SEND 'NB_ORA_CLIENT=holtuv1';+
+5> SEND 'NB_ORA_SERV=holtbk11';+
+6> SEND 'NB_ORA_POLICY=test_orabk_holtuv1';+
+7> recover database skip tablespace 'PERFSTAT', 'YEAR2009';+
+8> }+
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 06/04/2010 15:30:41
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/data/db01/ORABK_ARCH/ORABK/archivelog/2010_06_03/o1_mf_1_5_60h9p9z0_.arc'
ORA-00283: recovery session canceled due to errors
ORA-16067: activation identifier mismatch in archive log /data/db01/ORABK_ARCH/ORABK/archivelog/2010_06_03/o1_mf_1_5_60h9p9z0_.arc
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 06/04/2010 15:41:43
ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
ORA-01110: data file 5: '/data/db01/ORABK/perfstat.dbf'
any sugess please.
thank you
SuradechM.Suradech wrote:
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 06/04/2010 15:41:43
ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
ORA-01110: data file 5: '/data/db01/ORABK/perfstat.dbf'
any sugess please.
thank you
SuradechHi Suradech.This error(ORA-01157,ORA-01110) because in controlfile remain information about of '/data/db01/ORABK/perfstat.dbf'.Due to you restored controlfile from backup.You have to re-create controlfile or you can open database without this datafile.(Also there is YEAR2009' tablespaces datafile).You can try following.
1.
sqlplus "/as sysdba"
alter database datafile '/data/db01/ORABK/perfstat.dbf' offline drop;
alter database open;or
2.
sqlplus "/as sysdba"
alter database backup controlfile to trace as '/data/ctrl'; --then edit this file and remove '/data/db01/ORABK/perfstat.dbf' line(also YEAR2009`s datafile)
shutdown immediate;
startup nomount;
@/data/ctrl;
alter database open resetlogs; also see following metalink note.
How To Recover Database Where Backup Has Tablespace Excluded [ID 732627.1]
Ora-01157 When Running Recover Database Skip Forever Tablespace Noredo [ID 561440.1] -
Restore the dropped tablespace using RMAN?
Hello,
I have done a oracle tablespace re-org for PSAPPOOLD,PSAPPOOLI. Now I want to restore only the OLD PSAPPOOLD,PSAPPOOLI tablespace using TAPE backup via RMAN.
The probelm is I have dropped the old tablespace during re-org which is a part of the re-org. Is it possible to restore the dropped tablespace using RMAN?
My Oracle version is 9.2.05
if anyone has done this before, please share your valuable ideas.
I wrote the below script for the restore.
run {
allocate channel ch1 type sbt_tape;
startup nomount
restore controlfile; -
>(I guess,if I restore old control file, I might get old structure which help the restore of TB)
alter database mount ;
restore tablespace PSAPPOOLD,PSAPPOOLI;
recover tablespace PSAPPOOLD,PSAPPOOLI;;
release channel ch1;
Thanks,
Arjun
Edited by: Arjun Venkateswarlu on Jul 31, 2009 6:40 PM> I have done a oracle tablespace re-org for PSAPPOOLD,PSAPPOOLI. Now I want to restore only the OLD PSAPPOOLD,PSAPPOOLI tablespace using TAPE backup via RMAN.
>
> The probelm is I have dropped the old tablespace during re-org which is a part of the re-org. Is it possible to restore the dropped tablespace using RMAN?
Hello Arjun,
why would you want to do this?
What is is you want to achieve by this action?
BTW: it's not possible to do that.
Check [Performing RMAN Tablespace Point-in-Time Recovery|http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtspit.htm].
You want a "Tablespace point in time recovery" (TSPITR) for a dropped tablespace and that is just not possible with RMAN.
So, the easiest way for you to get this tablespace back would be to restore and recover the database to a different host.
Ah, while we're at it: using RMAN outside the BRTOOLS is not supported by SAP - so you better be a wiz with it because there won't be much help in case anything does not work.
regards,
Lars -
How to recover tools tablespace???
Hi,
actually i was playing my database,where i have done few things like..
1.i manually delete backups of my database.
2.create autobackup of control file and and restore autobackup controlfiles which replcae previous controlfile.
3.after restoring my autobackup controlfile i tried to open the database,but then i recived a error in which the rman says that my system tablespace need recovery.i couden't able to perform this task because of no backup of my database.
4.aftre i thoght i decided to recreate a controlfile because at that time it seems the only option to get my database back any sort of life.
5.i made all the required changes which was needed to create a ctlfile.fortunatly i got sucess in creating a controlfile abd i thought i've done it,but when i tried to open my database it says that the file was inconsistent
due to failed media recovery and this won't allow to me open the database until unless i recover my tools tablesapce.
6.now the quesion i want to ask is weather i can able to recover my tools tablespace,or i again need to recreate a ctlfile withought having tools datafile in my ctlfile.i wish if there is any hope so i able to open my database withough loosing system tablespace.
your help would highly appriciated.
thanks
Alok Kumar.Asif Kabir,
The OP cannot recover the dropped tablespace into the current database as the tablespace no longer belongs to the database.
He will have to do a Point In Time Recovery and then copy data back.
Even the method documented here (as TSPITR) will not work
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmtspit.htm#i1014116
He has to do a manual restore and recover the database (e.g to an alternate server / database name) to a point before the DROP. And then export data from that recovered instance and import it into the production database.
Hemant K Chitale
http://hemantoracledba.blogspot.com -
RESTORE: dropped tablespace 10g
Hi all,
unfortunately we dropped a tablespace after we take a RMAN full backup.
Now we are trying to recover the hole database.
We getting several errors that the RMAN can not file the datafile in the Catalog.
It is also not possible to set the tablespace/datafile offline because he does not exist(it was dropped)......
By searching the web we found some information to get a clean controlfile copy from backup.
recover .....controlfile..... OK
the v$datafie view consist now the datafiles.
alter database ...datafile....offline......OK
Recover again.. Same problem.
RMAN can not find the datafile in the catalog.
Does anyone have a detailed howto recover a tablespace after a drop from backup. ?
Thanks !!
*Tthx problem solved..
NOTE: It was necessary to use the controfile from the backup. Otherwise recover runs into missing file errors.
*T -
Incomplete Recovery After Drop Tablespace.
Hi...some technical help required.
I was trying a hands-on for incomplete recovery. That is drop a tablespace and then retrieve back until 1 second before drop statement.
The Steps were like this...
1) Shutdown Immediate;
2) Copy all *.ctl, *.dbf, logfiles into a different folder <nis_back>
3) Startup;
4) Enter 3-4 Records and Commit. Table is in <USER> Tablespace.
5) 3 times "alter system switch logfile;"
5) drop tablespace users;
6) shutdown;
7) Check the Alter Log and find the time when tablespace dropped.
Suppose time when dropped is -> 21-Aug 10:30:45 AM. (HH:MM:SS)
7) copy back only *.dbf, *.ctl files from backup folder <nis_back>
8) startup mount;
9) alter database recover automatic until time '2002-08-21:10:30:40';
10) <<Statement Process>> Message Comes.
11) alter database open resetlogs;
When I open the table into which I inserted records just before dropping the tablespace I dont see the records (Inseretd in Step - 4) but the tablespace is back.
Now My Concern -> Why did the 3-4 record which I inserted in step 4 did not get restored from the archieve log ?
Hope to hear from you all soon.
Thanks in advance.
Regards
NishitAfter step 5, try ALTER SYSTEM ARCHIVELOG ALL
Naveen
Hi...some technical help required.
I was trying a hands-on for incomplete recovery. That is drop a tablespace and then retrieve back until 1 second before drop statement.
The Steps were like this...
1) Shutdown Immediate;
2) Copy all *.ctl, *.dbf, logfiles into a different folder <nis_back>
3) Startup;
4) Enter 3-4 Records and Commit. Table is in <USER> Tablespace.
5) 3 times "alter system switch logfile;"
5) drop tablespace users;
6) shutdown;
7) Check the Alter Log and find the time when tablespace dropped.
Suppose time when dropped is -> 21-Aug 10:30:45 AM. (HH:MM:SS)
7) copy back only *.dbf, *.ctl files from backup folder <nis_back>
8) startup mount;
9) alter database recover automatic until time '2002-08-21:10:30:40';
10) <<Statement Process>> Message Comes.
11) alter database open resetlogs;
When I open the table into which I inserted records just before dropping the tablespace I dont see the records (Inseretd in Step - 4) but the tablespace is back.
Now My Concern -> Why did the 3-4 record which I inserted in step 4 did not get restored from the archieve log ?
Hope to hear from you all soon.
Thanks in advance.
Regards
Nishit -
Hello,
1 create tablespace TS1
2 create restore point RP1;
3 drop tablespace TS1 (datafile '/c:/ts1.dbf') including files
4 restore database to RP1
5 alter database open resetlogs failed with this error :
ERROR at line 1:
ORA-01245: offline file 7 will be lost if RESETLOGS is done
ORA-01110: data file 7: '/c:/ts1.dbf'
Can you help me please to fix this issue and to understand why it's occured.Hi,
If you check the alert log you will get message similar to
Recovery deleting file #7:'<Oracle_Home>/db/dbs/UNNAMED00007' from controlfile.
Now you have 2 option
1. If you have backup of that tablespace TS1 then you can restore and recover it
If you don't need that tablespace then you offline drop that datafile 7 . Open the database in resetlogs mode and then drop tablespace TS1
Thank you -
Restore tables from dropped tablespace
I have a tablespace that has been dropped and re-created.
I found out that there are some tables in the dropped tablespace that I'd like to get back.
Is there a way to do this using RMAN ? I have an rman backup of the tablepsace from a few days ago.Too bad since you dropped the tablespace, you can't use RMAN Tablespace Point In Time Recovery. (TSPITR)
You have to do whole database Point-In-Time Recovery using Until clause of RMAN restore
until Clause
If you have FLASHBACK DATABASE turn on, that's easier.
User-Managed Flashback Features of Oracle -
Can i recovered dropped users from Flash Back Database
I am having confusion on step by step process for Recovering dropped user from Flash Back Database or from RMAN.
And Which case we will use Flash Back Database or RMAN?1) Restore database (PITR- Point In Time Recovery) until the schema was dropped.
RECOVER DATABASE UNTIL SCN XXXXX;
2) If you only want a table:
flashback table XXXX to before drop;
3) Flashback database (if you have flashback on):
FLASHBACK DATABASE TO SCN XXXXX;
or
FLASHBACK DATABASE TO TIME "TO_DATE('XX/XX/XX','MM/DD/YY')";
You have some examples at documentation:
http://docs.oracle.com/cd/B28359_01/backup.111/b28270/rcmflash.htm -
Can i recover a tablespace in diff database, is it possible ????
i am very frustated as i tried to bakup and recover a
tablespace in diffrent database where i have a tablespace
i would like to tell you (which i want to bkup nad recover)
i have two database one is db01 and the other
is oemrep and i am working on dedicated server i have done few
things on oemrep database i tried few commands which is are..
$ rman target hr@db01
after providing password it connected me to db01 database and
then i backup and recover tablespace test which is on db01 dataabse
i have successfull run backup and recovery command and found no error in that, now i jsut want to know can i see the tablespace
in oemrep database..plese tell me what to do if this in not a right
way to do this..please let me know i wolud be very thankfull of you..
very much thanks from my side....Step 9: Apply this command to see all the options of the export utility
C:\>
C:\>EXP HELP=Y
Export: Release 10.1.0.2.0 - Production on Fri Apr 23 19:48:30 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
You can let Export prompt you for parameters by entering the EXP
command followed by your username/password:
Example: EXP SCOTT/TIGER
Or, you can control how Export runs by entering the EXP command followed
by various arguments. To specify parameters, you use keywords:
Format: EXP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
Example: EXP SCOTT/TIGER GRANTS=Y TABLES=(EMP,DEPT,MGR)
or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword Description (Default) Keyword Description (Default)
USERID username/password FULL export entire file (N)
BUFFER size of data buffer OWNER list of owner usernames
FILE output files (EXPDAT.DMP) TABLES list of table names
COMPRESS import into one extent (Y) RECORDLENGTH length of IO record
GRANTS export grants (Y) INCTYPE incremental export type
INDEXES export indexes (Y) RECORD track incr. export (Y)
DIRECT direct path (N) TRIGGERS export triggers (Y)
LOG log file of screen output STATISTICS analyze objects (ESTIMATE)
ROWS export data rows (Y) PARFILE parameter filename
CONSISTENT cross-table consistency(N) CONSTRAINTS export constraints (Y)
OBJECT_CONSISTENT transaction set to read only during object export (N)
FEEDBACK display progress every x rows (0)
FILESIZE maximum size of each dump file
FLASHBACK_SCN SCN used to set session snapshot back to
FLASHBACK_TIME time used to get the SCN closest to the specified time
QUERY select clause used to export a subset of a table
RESUMABLE suspend when a space related error is encountered(N)
RESUMABLE_NAME text string used to identify resumable statement
RESUMABLE_TIMEOUT wait time for RESUMABLE
TTS_FULL_CHECK perform full or partial dependency check for TTS
TABLESPACES list of tablespaces to export
TRANSPORT_TABLESPACE export transportable tablespace metadata (N)
TEMPLATE template name which invokes iAS mode export
Export terminated successfully without warnings.Joel Pérez
http://otn.oracle.com/experts -
Undable to drop tablespace ORA-01561: failed to remove all objects in the
hi,
i am unable to drop table tablespace how can i do that??
please advise
DROP TABLESPACE tbs_tp2 INCLUDING CONTENTS AND datafiles
ERROR at line 1:
ORA-01561: failed to remove all objects in the tablespace specified
Thanks in advance
siva
chennaiHave you tried dropping the objects individually? You can see which objects still belong to this tablespace by using the DBA_SEGMENTS view as shown below:
SELECT OWNER, SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME
FROM DBA_SEGMENTS
WHERE TABLESPACE_NAME=tbs_tp2;HTH! -
Error while dropping tablespace
Hi all
I am getting follwogin error while dropping tablespace.is it memory prob?
ERROR at line 1:
ORA-04031: unable to allocate 4180 bytes of shared memory ("shared
pool","unknown object","sga heap(1,0)","state objects")
Thanks.Your Sga seems too small, you should increase it
-
Problem while dropping tablespace
Hi all,
I am getting following error while i am trying to drop tablespace
ORA-02449: unique/primary keys in table referenced by foreign keys.
I am using followin statement to drop tablespace;
drop tablespace QAREF430 including contents and datafiles;
wat might be the problem?
Thanks.wat might be the problem?You have some referential integrity constraints, outside QAREF430 tablespace, pointing to a table inside QAREF430 tablespace. Try
drop tablespace QAREF430 including contents and datafiles cascade constraints; -
How to recover undo tablespace in 9i
How can i recover undo tablespace 9i.Can any provide step by step recovery process
Doc ID 94114.1 on Metalink might be of interest to you
Maybe you are looking for
-
Search in Mail no longer working
Trying to search emails for keywords no longer works, or returns no results. Clearly not the case as I can ultimately find the email if I look hard enough. Rebuilding mailbox did not resolve the issue.
-
How do I insert a .pages file into an openoffice document
How do I insert a Pages .pdf file into an openoffice writer document?
-
Confirm quantity for an prod order
After confirming quantity for an order, can I use the same stock for another order
-
I have a separate installation of Sun Java Communications Suite 6u2 frontend: WebServer,Communication Express, messaging (front) and Calendar (front) midleTier: Delegated Administrator, webserverand Access Manager backend: Directori Server, Messaging
-
Table & Fields for Collection Amount
Hi, I want to create an ABAP report for invoice Vs. Collection. But getting stuck in 1 scenario. Case: I have raised 2 invoices for a same client. Inv No. Date. Amount 10000001 23.03.2009 100.00 10000011 15.04.2009