RMAN restore scenario
I am not using catalog. control file record set to 31days but retain only 1 full backup in disk.
took a backup on 23-may which got deleted from disk as of 28-may. all archive logs taken on 23-may got deleted from disk as well.
Goal : I want to restore validate for 23-may.
I restored the files from tape (both image copies and archive logs).
rman doesn't recognize the archive logs. What is needed to make rman recognize the files restored from tape.
Thanks
Thanks for all your replies. At first I want to validate the backups taken on 23-may and make sure they are recoverable.
rman shows 27-may , 28-may backup as recoverable and archivelogs dated on 27-may and 28-may
RMAN> list backup recoverable;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
18 Full 7.08M DISK 00:00:01 27-MAY-08
BP Key: 18 Status: AVAILABLE Compressed: NO Tag: TAG20080527T175134
Piece Name: /orabackup/boepcm/rman/online/c-3049278399-20080527-01
Control File Included: Ckp SCN: 462524 Ckp time: 27-MAY-08
SPFILE Included: Modification time: 26-MAY-08
BS Key Type LV Size Device Type Elapsed Time Completion Time
19 Full 7.08M DISK 00:00:01 28-MAY-08
BP Key: 19 Status: AVAILABLE Compressed: NO Tag: TAG20080528T175117
Piece Name: /orabackup/boepcm/rman/online/c-3049278399-20080528-00
Control File Included: Ckp SCN: 501491 Ckp time: 28-MAY-08
SPFILE Included: Modification time: 28-MAY-08
BS Key Type LV Size Device Type Elapsed Time Completion Time
20 Full 7.08M DISK 00:00:00 28-MAY-08
BP Key: 20 Status: AVAILABLE Compressed: NO Tag: TAG20080528T175136
Piece Name: /orabackup/boepcm/rman/online/c-3049278399-20080528-01
Control File Included: Ckp SCN: 501519 Ckp time: 28-MAY-08
SPFILE Included: Modification time: 28-MAY-08
RMAN> list archivelog all;
List of Archived Log Copies
Key Thrd Seq S Low Time Name
61 1 51 A 27-MAY-08 /orabackup/boepcm/rman/online/arch_D-BOEPCM_id-3049278399_S-51_T-1_A-655222143_2tjhh9d1
62 1 52 A 27-MAY-08 /orabackup/boepcm/rman/online/arch_D-BOEPCM_id-3049278399_S-52_T-1_A-655222143_2ujhh9d3
58 1 53 A 27-MAY-08 /orabackup/boepcm/rman/online/arch_D-BOEPCM_id-3049278399_S-53_T-1_A-655222143_2qjhh9co
59 1 54 A 27-MAY-08 /orabackup/boepcm/rman/online/arch_D-BOEPCM_id-3049278399_S-54_T-1_A-655222143_2rjhh9ct
60 1 55 A 28-MAY-08 /orabackup/boepcm/rman/online/arch_D-BOEPCM_id-3049278399_S-55_T-1_A-655222143_2sjhh9cv
63 1 56 A 28-MAY-08 /orabackup/boepcm/rman/online/arch_D-BOEPCM_id-3049278399_S-56_T-1_A-655222143_2vjhh9d6
64 1 57 A 28-MAY-08 /var/opt/oracle/oradata/boepcm/arch/arch_1_57_655222143.arc
65 1 58 A 28-MAY-08 /var/opt/oracle/oradata/boepcm/arch/arch_1_58_655222143.arc
Recovery Manager complete.
$
here are the files that has be restored from tape that belongs to may 23. It has datafiles, arch files, control file and spfile. how do I make these files rman aware of it and then validate it
$ ll
total 3259250
-rw-r----- 1 oracle dba 17454080 May 23 10:34 arch_D-BOEPCM_id-3049278399_S-30_T-1_A-655222143_0bjh17b8
-rw-r----- 1 oracle dba 17184768 May 23 10:34 arch_D-BOEPCM_id-3049278399_S-31_T-1_A-655222143_0cjh17ba
-rw-r----- 1 oracle dba 11603968 May 23 10:34 arch_D-BOEPCM_id-3049278399_S-32_T-1_A-655222143_0djh17bf
-rw-r----- 1 oracle dba 2048 May 23 10:34 arch_D-BOEPCM_id-3049278399_S-33_T-1_A-655222143_0ejh17bh
-rw-r----- 1 oracle dba 7143424 May 23 10:34 c-3049278399-20080522-04
-rw-r----- 1 oracle dba 7143424 May 23 10:34 c-3049278399-20080522-05
-rw-r----- 1 oracle dba 7143424 May 23 10:34 c-3049278399-20080522-06
-rw-r----- 1 oracle dba 7143424 May 23 10:34 c-3049278399-20080523-00
-rw-r----- 1 oracle dba 209723392 May 23 10:34 data_D-BOEPCM_I-3049278399_TS-BOE_DATA_FNO-4_08jh17a3
-rw-r----- 1 oracle dba 209723392 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-BOE_DATA_FNO-4_0ijh395r
-rw-r----- 1 oracle dba 125837312 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-SYSAUX_FNO-3_09jh17ai
-rw-r----- 1 oracle dba 125837312 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-SYSAUX_FNO-3_0jjh396k
-rw-r----- 1 oracle dba 251666432 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-SYSTEM_FNO-1_06jh178q
-rw-r----- 1 oracle dba 251666432 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-SYSTEM_FNO-1_0gjh3948
-rw-r----- 1 oracle dba 209723392 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-UNDO_TS_FNO-2_07jh179k
-rw-r----- 1 oracle dba 209723392 May 23 10:35 data_D-BOEPCM_I-3049278399_TS-UNDO_TS_FNO-2_0hjh3952
-rw-r--r-- 1 oracle dba 499 May 23 10:35 rman_hb_boepcm052220081525.log
-
Similar Messages
-
RMAN: restore scenario failed
Hi!
The problem occur when trying to restore original database on another test server
Original server - Windows 2008 x64bit, Oracle Database *10.2.0.5* w/o patch,ASM configured.
Database - Archivelog mode. RMAN performs weekly database incremental level 0 backup, daily level 1 backup.
Contorl file backup occurs immediately after incremental level 0/1 database backup
The backup incremental level 0 RMAN copy restoing on:
Server - Windows 2008 x32bit, Oracle Database *10.2.0.5* w/o patch, ASM configured
input Data "on hands":
- Incremental level 0 database backup (Chkpt SCN 2978611044)
- Control file backup (controlfile_change# 2988231505 , checkpoint change# 2987947892)
- There is no oracle datafiles on test server, only instance started with appropriate parameters (SPFILE);
0) start instance
1) Restoring control file from backup (appropriate dbid has been set)
2) mount database
3) Crosscheck backup,archivelog..
4) delete expired backup,archivelog..
5) catalog backuppiece with incremental level 0 backup
6) "list backup" command display contents of backuppiece with all datafiles (Chkpt SCN 2978611044)
BS Key Type LV Size Device Type Elapsed Time Completion Time
589 Incr 0 35.59G DISK 02:13:31 07-MAR-11
BP Key: 597 Status: AVAILABLE Compressed: YES Tag: INCREMENTAL LEVEL 0 BACKUP
Piece Name: C:\BACKUP\DB0_EMCOR_1814183562_20110311_589_1_IDM6JCIS.BKP
List of Datafiles in backup set 589
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/system.262.732897467
2 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/undotbs1.271.732882203
3 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/sysaux.260.732896913
4 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/undotbs2.272.732882195
5 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.274.732882177
6 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.278.732882143
7 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.261.732897211
8 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.277.732882151
9 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.276.732882159
10 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.275.732882169
11 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.269.732888789
12 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.268.732890649
13 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.267.732891909
14 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.258.732895369
15 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.259.732895663
16 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.266.732892429
17 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/usertbsp.264.732897773
18 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.265.732893801
19 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.270.732887581
20 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/system.263.732897753
21 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.273.732882187
22 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.257.732894149
23 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.295.734795693
24 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_tab.297.736591245
25 0 Incr 2978611044 07-MAR-11 +DATA/emcor/datafile/emcos_ind.298.736593189
7) restore database validate
RMAN-03002: failure of restore command at 03/16/2011 15:35:42
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
8) list incarnation of database
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 EMCOR 1814183562 PARENT 1577251660 06-OCT-10
2 2 EMCOR 1814183562 CURRENT 1578030113 09-OCT-10
3 3 EMCOR 1814183562 ORPHAN 1578047894 20-OCT-10
So, the DBPITR not possible.
I've tried to restore on windows 2008 x64 - result is the same.According to the SCNs your backups (controlfile,datafiles) belong to orphaned incarnation 3, NOT current incarnation 2. But you run the restore process in incarnation 2.
There was obviously a point in time recovery with resetlogs to 09-OCT-10 (Reset_SCN 1578030113), but you want to restore to SCN 2978611044.
Try
reset database to incarnation 3;
Werner -
hellow,
I am working on a rman recovery scenario as follows:
---I have a full backup on sunday
---My database in archivelog mode
---now I lost one of table on Monday 7:20PM
---then I lost another table on same day at 7:40PM
---I came to know about this(both table drop incident) at 7:45PM same day
---Now I have to recover both the tables
---I have catalog database configured
please tell me step by step, how the recovery should be done?
And I also want to know where I can find such scenarios on which I can work any book or web resource?This is an abstract of http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/flashptr006.htm#sthref651
DBPITR within the current incarnation is performed using the current control file. When performing DBPITR, you can avoid errors by using the SET UNTIL command to set the target time at the beginning of the process, rather than specifying the UNTIL clause on the RESTORE and RECOVER commands individually. This ensures that the datafiles restored from backup will have timestamps early enough to be used in the subsequent RECOVER operation.
The steps required for DBPITR are as follows:
Connect RMAN to the target database and, if applicable, the recovery catalog database. Bring the database to a MOUNT state:
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
Perform the following operations within a RUN block:
Use SET UNTIL to specify the target time, restore point, SCN, or log sequence number for DBPITR. If specifying a time, then use the date format specified in the NLS_LANG and NLS_DATE_FORMAT environment variables.
If automatic channels are not configured, then manually allocate disk and tape channels as needed.
Restore and recover the database.
The following example performs DBPITR on the target database until SCN 1000:
RUN
SET UNTIL SCN 1000;
# Alternatives:
# SET UNTIL TIME 'Nov 15 2004 09:00:00';
# SET UNTIL SEQUENCE 9923;
RESTORE DATABASE;
RECOVER DATABASE;
Note:
You can also use time expressions, restore points, or log sequence numbers to specify the SET UNTIL time:
SET UNTIL TIME 'Nov 15 2004 09:00:00';
SET UNTIL SEQUENCE 9923;
SET UNTIL RESTORE POINT before_update;
If the operation completes without errors, then your DBPITR has succeeded. You can open the database read-only and perform queries as needed to ensure that the effects of the logical corruption have been reversed. If not, you may have chosen the wrong target SCN. In such a case, investigate the unwanted change further and determine a new target SCN, then repeat the DBPITR process.
7.6.4.1 Using a Time Expression for Database Point-in-Time Recovery
You can use a time expression instead of the SCN in the SET UNTIL statement, as shown in the preceding example. However, note that if you use SET UNTIL TIME to specify the target time for point-in-time recovery, some times that you can specify may not be in the current incarnation. The database may have been in an ancestor incarnation, or even in a sibling incarnation, at the target time. If your target time is not in the current incarnation, then see "Point-in-Time Recovery to an Ancestor Incarnation" for more information on DBPITR to ancestor incarnations, and Oracle Database Backup and Recovery Advanced User's Guide for more information on DBPITR to incarnations that are not ancestors of the current incarnation.
7.6.5 Options After Database Point-in-Time Recovery
After a successful DBPITR, your choices are:
Export one or more objects from your database using an Oracle export utility such as Data Pump Export. You can then recover the database to the current point in time and re-import the exported objects, as a way to return these objects to their state prior to the unwanted change without abandoning all other changes.
Open your database for read-write, abandoning all changes after the target SCN. In such a case, you must open the database with the RESETLOGS option, as shown here:
RMAN> ALTER DATABASE OPEN RESETLOGS;
The current online redo logs are archived, the log sequence number is reset to 1, and the online redo logs are given a new time stamp and SCN. Identifying redo log files with a new log sequence number and incarnation eliminates the possibility of corrupting datafiles by the application of obsolete archived redo logs.
The OPEN RESETLOGS operation will fail if a datafile is off-line, unless the datafile went offline normally or is read-only. You can bring files in read-only or offline normal tablespaces online after the RESETLOGS because they do not need any redo.
Sybrand Bakker
Senior Oracle DBA -
Hello all,
I'm able to successfully restore a database's datafiles from tape to the host where the database actually runs but when I try to restore the datafiles to a completely differnt host RMAN errors out saying that it could not locate the datafile on the tape.
This is what I did....
Database Name : DEV (live database)
Host : dev_host
From the dev_host, I initiated the rman restore script (which connects to the catalog) to restore just one of DEV's datafiles and it worked. The datafile got restored to dev_host.
Let's now assume a disaster recovery scenario where dev_host becomes unusable and I have to restore the database from tape to a totally diffrent host and bring up the database. To simulate this I did the following.
Database: DEV( shell database in mount state)
Host : new_host
I just created a pfile and mounted the DEV database on the "new_host". At this time we do not have any of the DEV's datafiles on the "new_host". We need to retore them from tape. While the database was in mount state, I initiated the restore script( which connects to the catalog) from "new_host" but rman failed with the following message.
run {
allocate channel t1 type SBT_TAPE;
SEND 'NB_ORA_SERV=bkp200,NB_ORA_POLICY=ora-bkp200-dev_host';
set newname for datafile '/d1/oradata/DEV/users_temp_01.dbf' to '/d2/oradata/DEV/users_temp_01.dbf';
restore tablespace USERS_TEMP until time "TO_DATE('12/27/09','MM/DD/YY')";
release channel t1;
allocated channel: t1
channel t1: sid=92 devtype=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 6.5 (2007072323)
sent command to channel: t1
executing command: SET NEWNAME
Starting restore at 01/08/2010 11:31:30
channel t1: starting datafile backupset restore
channel t1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /d2/oradata/DEV/users_temp_01.dbf
channel t1: reading from backup piece FULL_DEV_oel1s5u4
ORA-19870: error reading backup piece FULL_DEV_oel1s5u4
ORA-19507: failed to retrieve sequential file, handle="FULL_DEV_oel1s5u4", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Backup file <FULL_DEV_oel1s5u4> not found in NetBackup catalog
failover to previous backup
channel t1: starting datafile backupset restore
channel t1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /d2/oradata/DEV/users_temp_01.dbf
channel t1: reading from backup piece FULL_DEV_o4l1rfsh
ORA-19870: error reading backup piece FULL_DEV_o4l1rfsh
ORA-19507: failed to retrieve sequential file, handle="FULL_DEV_o4l1rfsh", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Backup file <FULL_DEV_o4l1rfsh> not found in NetBackup catalog
failover to previous backup
Question: Can I not restore data from tape to a host other than where the database actually runs. I'm not sure why rman fails to restore data to a different host.
Do I need to set something at the database level or Media Manager level? We are using Netbackup.
Appreciate if you can give me some pointers.
Thanks for your time.Can I not restore data from tape to a host other than where the database actually runs. I'm not sure why rman fails to restore data to a different host.
Do I need to set something at the database level or Media Manager level? We are using Netbackup
You can. For that you have to use Duplicate command. You have to duplicate the database, by replicating it from the backup.
For that you have to have the same versions OS of both the prod (from which you took backup) and test (to which you are going to replicate). The auxiliary database (test) should be in nomount for this. There are tons of websites to give you step by step processes for this
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1006506
Check the link -
Restore Scenarios when backup was taken on Standby exadata cluster through zfs
I have a question here.
We have a dataguard environment in our exadata clusters. Primary resides on full Rack and standby on half rack. Both x4 and backup are disks to disks through zfs.
The backups are full once a week and incremental afterwards , happens on the standby side per oracle best practice.
However we try to test restore scenarios now and how do we restore the backups to primary?
Thanks in advance.Hi..
To validate the RMAN backup you need to restore it at some new host server.You can go through
[http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov.htm#BRADV908]
You can even use the RMAN validation command.
Anand -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
If I need a full rman restore which backups will it use?
Hello,
I have a database 11.1.0.7 with 8TB. Block change tracking is enabled.
At the weekend I take level 0 backup and during the week level 1 cumulative.
For some weeks the level 0 backup is failing, so I only have level 1 cumulative backups taken every week day with a 4 weeks old level 0 backup.
If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
I ask this because grid crontrol tells me that the recent level 1 backups input size is smaller than last week level 1 backups and in between I dont have any level 0 sucessfull backups. Shouldn't the input size of level 1 cumulative increase until the next level 0 backup ?
The grid reports:
Backup Name Status Start Time Time Taken Type Output Devices Input Size Output Size Output Rate (Per Sec)
rman_df_lv1c COMPLETED 25/Jul/2011 21H00m WEST 02:33:29 DB INCR SBT_TAPE *1.32T* 289.02G 32.14M
rman_df_lv0 FAILED 23/Jul/2011 02H01m WEST DB INCR SBT_TAPE 8.78T 8.06T
rman_df_lv1c COMPLETED 21/Jul/2011 21H00m WEST 04:39:38 DB INCR SBT_TAPE *3.46T* 550.82G 33.62M
rman_df_lv1c COMPLETED 20/Jul/2011 21H00m WEST 04:47:36 DB INCR SBT_TAPE *3.37T* 524.36G 31.12M
rman_df_lv1c COMPLETED 19/Jul/2011 21H00m WEST 04:06:09 DB INCR SBT_TAPE *3.15T* 490.75G 34.03M
rman_df_lv1c COMPLETED 18/Jul/2011 21H00m WEST 03:40:24 DB INCR SBT_TAPE *2.49T* 410.88G 31.82M
rman_df_lv0 FAILED 16/Jul/2011 22H16m WEST DB INCR SBT_TAPE 6.27T 5.69T
rman_df_lv1c FAILED 14/Jul/2011 21H00m WEST 06:13:40 DB INCR SBT_TAPE 4.38T 714.30G 32.62M
rman_df_lv1c FAILED 13/Jul/2011 21H01m WEST 04:40:45 DB INCR SBT_TAPE 3.25T 542.98G 33.01M
rman_df_lv1c COMPLETED 12/Jul/2011 21H00m WEST 07:15:54 DB INCR SBT_TAPE 4.74T 847.93G 33.20M
rman_df_lv1c COMPLETED 11/Jul/2011 21H00m WEST 07:26:40 DB INCR SBT_TAPE 3.78T 766.40G 29.28M
rman_df_lv0 FAILED 9/Jul/2011 02H32m WEST 04:30:44 DB INCR SBT_TAPE 749.89G 716.02G 45.14M
rman_df_lv1c FAILED 7/Jul/2011 21H01m WEST 04:49:24 DB INCR SBT_TAPE 2.16T 515.90G 30.42M
rman_df_lv1c FAILED 6/Jul/2011 21H00m WEST 01:26:06 DB INCR SBT_TAPE 745.83G 165.48G 32.80M
rman_df_lv1c FAILED 5/Jul/2011 21H01m WEST 00:05:48 DB INCR SBT_TAPE 58.56G 7.56G 22.24M
rman_df_lv1c FAILED 4/Jul/2011 21H00m WEST 01:55:03 DB INCR SBT_TAPE 422.40G 79.55G 11.80M
rman_df_lv0 FAILED 3/Jul/2011 16H32m WEST 30:22:04 DB INCR SBT_TAPE 4.53T 4.21T 40.40M>
If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
From http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmvalid.htm
Validating Backups Before Restoring Them
You can run RESTORE ... VALIDATE to test whether RMAN can restore a specific file or set of files from a backup. RMAN chooses which backups to use.
The database must be mounted or open for this command. You do not have to take datafiles offline when validating the restore of datafiles, because validation of backups of the datafiles only reads the backups and does not affect the production datafiles.
When validating files on disk or tape, RMAN reads all blocks in the backup piece or image copy. RMAN also validates offsite backups. The validation is identical to a real restore operation except that RMAN does not write output files.
You can monitor what RESTORE VALIDATE does.
Make precautions, so you do not damage the production DB!!!
Iordan Iotzov
http://iiotzov.wordpress.com/ -
RMAN restore from active database, ASM
I'm attempting to refresh a stage database from a prod database using RMAN restore from active database. Both are on ASM. After working through various hurdles, I've got one issue I'm a bit stuck on. I've got a handful of data files that do NOT have OMF names (ie MSTRDATA/mstrmdpd/datafile/gsa_indx instead of MSTRDATA/mstrmdpd/datafile/gsa_indx.351.714779777) and these are failing when I do the restore. The syntax I'm using in RMAN is as follows:
duplicate target database to dwstage
from active database
spfile parameter_value_convert 'dwprod','dwstage'
SET DB_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE'
SET LOG_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE';
The error message I'm getting is this:
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/21/2011 13:26:24
ORA-17628: Oracle error 19505 returned by remote Oracle server
continuing other job steps, job failed will not be re-run
Normally from what I've seen/read this error can be traced back to needing to pre-create the directories for the controlfiles etc, but since 90% of the datafiles copied correctly...
Any suggestions as to a way around this, or am I going to be forced to restore from a backupset?This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUXDB)
(ORACLE_HOME = <your oracle home>)
(SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again -
HOW TO RESOLVE ORA-01110 during RMAN restoration in oracle 11g
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\tanmoy>rman
Recovery Manager: Release 11.1.0.6.0 - Production on Fri Mar 29 22:55:02 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN> connect target orcl
target database Password:
connected to target database (not started)
RMAN> startup nomount;
Oracle instance started
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 150995860 bytes
Database Buffers 377487360 bytes
Redo Buffers 5844992 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 29-MAR-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=153 device type=DISK
recovery area destination: D:\app\administrator\flash_recovery_area
database name (or database unique name) used for search: ORCL
channel ORA_DISK_1: AUTOBACKUP D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\AUT
OBACKUP\2012_12_12\O1_MF_S_801849930_8DJQHTTW_.BKP found in the recovery area
AUTOBACKUP search with format "%F" not attempted because DBID was not set
channel ORA_DISK_1: restoring control file from AUTOBACKUP D:\APP\ADMINISTRATOR\
FLASH_RECOVERY_AREA\ORCL\AUTOBACKUP\2012_12_12\O1_MF_S_801849930_8DJQHTTW_.BKP
channel ORA_DISK_1: control file restore from AUTOBACKUP complete
output file name=D:\APP\ADMINISTRATOR\ORADATA\ORCL\CONTROL01.CTL
output file name=D:\APP\ADMINISTRATOR\ORADATA\ORCL\CONTROL02.CTL
output file name=D:\APP\ADMINISTRATOR\ORADATA\ORCL\CONTROL03.CTL
Finished restore at 29-MAR-13
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> catalog recovery area;
Starting implicit crosscheck backup at 29-MAR-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=153 device type=DISK
Crosschecked 5 objects
Finished implicit crosscheck backup at 29-MAR-13
Starting implicit crosscheck copy at 29-MAR-13
using channel ORA_DISK_1
Finished implicit crosscheck copy at 29-MAR-13
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_12\O
1_MF_1_1450_8DK6YO0M_.ARC
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1451_8DLPSYDY_.ARC
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1452_8DLVBJZ7_.ARC
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1452_8DM0LM1L_.ARC
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1453_8DM0LM1L_.ARC
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1454_8DM0NQ8X_.ARC
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\AUTOBACKUP\2012_12_12\O
1_MF_S_801849930_8DJQHTTW_.BKP
searching for all files in the recovery area
List of Files Unknown to the Database
=====================================
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1453_8DLXCJOB_.ARC
Do you really want to catalog the above files (enter YES or NO)? Y
cataloging files...
no files cataloged
List of Files Which Where Not Cataloged
=======================================
File Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2012_12_13\O
1_MF_1_1453_8DLXCJOB_.ARC
RMAN-07517: Reason: The file header is corrupted
RMAN> list backup;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
512 245.35M DISK 00:00:39 12-DEC-12
BP Key: 512 Status: AVAILABLE Compressed: NO Tag: TAG20121212T160059
Piece Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2012
_12_12\O1_MF_ANNNN_TAG20121212T160059_8DJQ7OF3_.BKP
List of Archived Logs in backup set 512
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1440 487654314 09-DEC-12 487695982 10-DEC-12
1 1441 487695982 10-DEC-12 487719639 10-DEC-12
1 1442 487719639 10-DEC-12 487741536 10-DEC-12
1 1443 487741536 10-DEC-12 487741634 10-DEC-12
1 1444 487741634 10-DEC-12 487771824 10-DEC-12
1 1445 487771824 10-DEC-12 487803737 12-DEC-12
1 1446 487803737 12-DEC-12 487810247 12-DEC-12
1 1447 487810247 12-DEC-12 487819910 12-DEC-12
1 1448 487819910 12-DEC-12 487837944 12-DEC-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
513 Full 1.94G DISK 00:03:18 12-DEC-12
BP Key: 513 Status: AVAILABLE Compressed: NO Tag: TAG20121212T160150
Piece Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2012
_12_12\O1_MF_NNNDF_TAG20121212T160150_8DJQ92L5_.BKP
List of Datafiles in backup set 513
File LV Type Ckp SCN Ckp Time Name
1 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.D
BF
2 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSAUX01.D
BF
3 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\UNDOTBS01.
DBF
4 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\USERS01.DB
F
5 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\EXAMPLE01.
DBF
6 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_SMILE.
DBF
7 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_GENERA
L.DBF
8 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_EMR.DB
F
9 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_DIAGNO
STICS.DBF
10 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_PHARMA
CY.DBF
11 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_PATIEN
T.DBF
12 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_ACCOUN
T.DBF
13 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_INVENT
ORY.DBF
14 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_HR.DBF
15 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_DUMMY.
DBF
16 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_AUDIT.
DBF
17 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_FACILI
TIES.DBF
19 Full 487837993 12-DEC-12 D:\APP\ADMINISTRATOR\ORADATA\ORCL\HMS_COMMON
.DBF
BS Key Size Device Type Elapsed Time Completion Time
514 222.00K DISK 00:00:06 12-DEC-12
BP Key: 514 Status: AVAILABLE Compressed: NO Tag: TAG20121212T160520
Piece Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2012
_12_12\O1_MF_ANNNN_TAG20121212T160520_8DJQHGS1_.BKP
List of Archived Logs in backup set 514
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1449 487837944 12-DEC-12 487838190 12-DEC-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
515 Full 12.17M DISK 00:00:00 12-DEC-12
BP Key: 515 Status: AVAILABLE Compressed: NO Tag: TAG20121212T160530
Piece Name: D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\AUTOBACKUP\201
2_12_12\O1_MF_S_801849930_8DJQHTTW_.BKP
SPFILE Included: Modification time: 12-DEC-12
SPFILE db_unique_name: ORCL
Control File Included: Ckp SCN: 487838210 Ckp time: 12-DEC-12
RMAN> run {Set until sequence 1450;
2> Restore database;
3> Recover database;
4> }
executing command: SET until clause
Starting restore at 29-MAR-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\SYSTEM01.DBF
channel ORA_DISK_1: restoring datafile 00002 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\SYSAUX01.DBF
channel ORA_DISK_1: restoring datafile 00003 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\UNDOTBS01.DBF
channel ORA_DISK_1: restoring datafile 00004 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\USERS01.DBF
channel ORA_DISK_1: restoring datafile 00005 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\EXAMPLE01.DBF
channel ORA_DISK_1: restoring datafile 00006 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_SMILE.DBF
channel ORA_DISK_1: restoring datafile 00007 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_GENERAL.DBF
channel ORA_DISK_1: restoring datafile 00008 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_EMR.DBF
channel ORA_DISK_1: restoring datafile 00009 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_DIAGNOSTICS.DBF
channel ORA_DISK_1: restoring datafile 00010 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_PHARMACY.DBF
channel ORA_DISK_1: restoring datafile 00011 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_PATIENT.DBF
channel ORA_DISK_1: restoring datafile 00012 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_ACCOUNT.DBF
channel ORA_DISK_1: restoring datafile 00013 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_INVENTORY.DBF
channel ORA_DISK_1: restoring datafile 00014 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_HR.DBF
channel ORA_DISK_1: restoring datafile 00015 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_DUMMY.DBF
channel ORA_DISK_1: restoring datafile 00016 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_AUDIT.DBF
channel ORA_DISK_1: restoring datafile 00017 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_FACILITIES.DBF
channel ORA_DISK_1: restoring datafile 00019 to D:\APP\ADMINISTRATOR\ORADATA\ORC
L\HMS_COMMON.DBF
channel ORA_DISK_1: reading from backup piece D:\APP\ADMINISTRATOR\FLASH_RECOVER
Y_AREA\ORCL\BACKUPSET\2012_12_12\O1_MF_NNNDF_TAG20121212T160150_8DJQ92L5_.BKP
channel ORA_DISK_1: piece handle=D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\B
ACKUPSET\2012_12_12\O1_MF_NNNDF_TAG20121212T160150_8DJQ92L5_.BKP tag=TAG20121212
T160150
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:05:15
Finished restore at 29-MAR-13
Starting recover at 29-MAR-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 03/29/2013 23:03:53
ORA-19698: D:\APP\ADMINISTRATOR\ORADATA\ORCL\REDO01.LOG is from different databa
se: id=1339157974, db_name=ORCL
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/29/2013 23:07:08
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'D:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.DBF'Hi,
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 03/29/2013 23:03:53
ORA-19698: D:\APP\ADMINISTRATOR\ORADATA\ORCL\REDO01.LOG is from different databa
se: id=1339157974, db_name=ORCL
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/29/2013 23:07:08
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'D:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.DBF'Restore finished successfully. But Recover is not.
Can you delete or move D:\APP\ADMINISTRATOR\ORADATA\ORCL\REDO01.LOG - redolog files to othere directory.
And recover again. Because this redo log files is belonging to other database.
Regards
Mahir M. Quluzade -
Does RMAN restore from 11.2.0.3 to 11.1.0.7?
Hi Team,
Interesting point is here, source is on 11.2.0.3 and somehow we missed 11.2.0 home on target (my team mate forgot to built new 11.2.0.3 home - we have 11.1.0 home), not sure how this rman restored/recovered with no issues on target even it has compatibility change (controlfile restore itself should fail).
Source is 11.2.0.3 and target is 11.1.0.7, presently the instance up and running with no issues, but we decided to re build with 11.2.0.3 home
Any hints? Please advice, I am curious about this functionality how did this happen! J
Thanks,
VenkatSee Oracle Support Note "Frequently Asked Questions about Restoring Or Duplicating Between Different Versions And Platforms (Doc ID 369644.1)" . Particularly Question 5.
You need to run the Downgrade procedures to downgrade a database from 11.2 to 11.1
Hemant K Chitale -
Dear All,
I have full rman backup and archivelog pieces where the version is 10.2.0.1.
Now I have prepared a server with oracle 11g and same mount points and want to restore the database from those pieces.
Is it possible?
If yes then what extra precautions and necessary things I need to do before or after the restoration?
Thanks in advance.Megatron wrote:
No. I just want to upgrade my db. So that I plan to follow the below steps
1. install oracle 11g software only in my new machine.
2. copy the backup pieces from 10G server to 11G server.
3. Run the rman restore and recover command.
Will it be any issue?Yes, it is issue.
You have to upgrade the database.
Run from source 10g database, @?/rdbms/admin/utlu111i.sql
In upgrade mode @?/rdbms/admin/catupgrd.sql
after opening database in 11g @?/rdbms/admin/utlrp.sql -
Can rman restore tablespace to a different tablespace name?
Hi all,
I was wondering that can RMAN restore a tablespace to a different name tablespace in the same instance? I have the full backup by RMAN, I wonder I can do that or not? Any helps would be greatly appreciated. Thank you.
Rich,Hi,
a tablespace is not necessarily a logical space to separate schema objects from one another (could be, but not necessarily, depends on your object distribution).
So what you need is: export your original user schema with the exp utility
then import this dump into another user schema with the imp tool (fromuser=old touser=new)
BEFORE you create the new user and you give it a different default tablespace. If you like to really separate the objects in tablespaces (like for transportable tablespaces) you may deny access to any of the tablespaces of old user to the new user. That makes sure data is not erroneously loaded in the old tablespaces.
Read the docs to understand this clearly if you like. -
Using RMAN restore the database on a new host in ASM
Hello All,
I am trying to restore a database without using RMAN database duplicate. I want to do set new name for datafile and rename log file for online logs and change database name at last using NID.
here are details
source database - APSPROD / server - X
target database - EMERALD / Server -Y
Compressed backup is copied to destination server and I am trying to restore database using RMAN. Here is my init.ora file
cat initAPSPROD1.ora
DB_NAME=APSPROD
compatible=11.2.0.3
sga_target=8G
CONTROL_FILES='+DATA_DM01/EMERALD/controlfile/cntrl01.dbf','+RECO_DM01/EMERALD/controlfile/cntrl02.dbf','+DATA_DM01/EMERALD/controlfile/cntrl03.dbf'
DB_BLOCK_SIZE=8192
db_file_name_convert=(+DATA_DM01/APSPROD,+DATA_DM01/EMERALD)
log_file_name_convert=(+DATA_DM01/APSPROD,+DATA_DM01/EMERALD,+RECO_DM01/APSPROD,+RECO_DM01/EMERALD)
DB_RECOVERY_FILE_DEST='+RECO_DM01'
DB_RECOVERY_FILE_DEST_SIZE=5500G
So from above you can see that control file should be restored to +DATA_DM01/EMERALD and +RECO_DM01/EMERALD path.
Question -
when I am trying to restore control file. It creates an ASM alias name in +DATA_DM01/EMERALD/controlfile/cntrl01.dbf',+RECO_DM01/EMERALD/controlfile/cntrl02.dbf',' and +DATA_DM01/EMERALD/controlfile/cntrl03.dbf' but It creates fully Qualified ASM Filename under +DATA_DM01/APSPROD and +RECO_DM01/
Here is output
RMAN> restore controlfile from '/dbfs_direct/FS1/RMAN_APSPROD/cf_APSPROD_i4p4b62m_1_1
2> ;
Starting restore at 02-APR-14
using channel ORA_DISK_1
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
output file name=+DATA_DM01/emerald/controlfile/cntrl01.dbf
output file name=+RECO_DM01/emerald/controlfile/cntrl02.dbf
output file name=+DATA_DM01/emerald/controlfile/cntrl03.dbf
Finished restore at 02-APR-14
output at ASM level
SMCMD [+RECO_DM01/EMERALD/CONTROLFILE] > ls -l
Type Redund Striped Time Sys Name
N cntrl02.dbf => +RECO_DM01/APSPROD/CONTROLFILE/current.17006.843826701
ASMCMD [+RECO_DM01/EMERALD/CONTROLFILE] > cd +RECO_DM01/APSPROD/CONTROLFILE/
ASMCMD [+RECO_DM01/APSPROD/CONTROLFILE] > ls -l
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE APR 02 12:00:00 Y current.17006.843826701
ASMCMD [+RECO_DM01/APSPROD/CONTROLFILE] > cd +DATA_DM01
ASMCMD [+DATA_DM01] > cd EMERALD/CONTROLFILE
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > ls -l
Type Redund Striped Time Sys Name
N cntrl01.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3678.843826699
N cntrl03.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3679.843826701
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > cd +DATA_DM01/APSPROD/CONTROLFILE
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > ls -l
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE APR 02 12:00:00 Y current.3678.843826699
CONTROLFILE HIGH FINE APR 02 12:00:00 Y current.3679.843826701
How can I ensure that every thing gets created in +DATA_DM01/EMERALD/ or [+RECO_DM01/EMERALD?? similary for datafile restore even I have used set new file name ASM fully quilified OMF datafile gets created under +DATA_DM01/APSPROD/
ASMCMD [+DATA_DM01/EMERALD/DATAFILE]
N undots5_01.dbf => +DATA_DM01/APSPROD/DATAFILE/APPS_UNDOTS5.3669.843818269
Thanks
PVEven If I explicitly say
rman target / nocatalog
RMAN> restore controlfile to '+DATA_DM01/emerald/controlfile/cntrl01.dbf' from '/dbfs_direct/FS1/RMAN_APSPROD/cf_APSPROD_i4p4b62m_1_1';
Starting restore at 02-APR-14
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=64 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 02-APR-14
It create as alias name +DATA_DM01/emerald/controlfile/cntrl01.dbf' pointing to +DATA_DM01/APSPROD/CONTROLFILE/
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > ls -l
Type Redund Striped Time Sys Name
N cntrl01.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3679.843828927
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > cd +DATA_DM01/APSPROD
ASMCMD [+DATA_DM01/APSPROD] > cd CONTROLFILE
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > ls -l
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE APR 02 12:00:00 Y current.3679.843828927
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > -
Hi,
Oracle 10.2.0.4.0 on AIX
Im restoring the backup.
I have restored the controlfile.
When I give restore databse, It's throwing the error.
RMAN> restore database
2> ;
Starting restore at 23-SEP-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 09/23/2010 18:01:16
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
'ADDITION' And I'm trying to restore from disk
Please suggest me
Thanks
KSG
Edited by: KSG on Sep 23, 2010 6:16 PM 'ADDITION'Hi,
Thanks again
I have created the symbolic link for the directory '"/t24/rman". does symbolic link works with RMAN?
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO NONE;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/t24/rman/%U';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/glosoft/oracle/oracle10g/product/10.2.0/db_1/dbs/snapcf_hilalrac.f'; # default
RMAN> restore database;
Starting restore at 23-SEP-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 09/23/2010 18:46:14
RMAN-12009: command aborted because some backup pieces could not be located
RMAN-12008: could not locate backup piece /t24/rman/df_t724770389_s23595_p1
RMAN-12008: could not locate backup piece /t24/rman/df_t724770389_s23597_p1
RMAN-12008: could not locate backup piece /t24/rman/df_t724770389_s23598_p1
RMAN-12008: could not locate backup piece /t24/rman/df_t724770389_s23596_p1
$ cd /t24/rman
$ ls
cf_t724773247_s23600_p1 df_t724770389_s23596_p1 df_t724770389_s23598_p1
df_t724770389_s23595_p1 df_t724770389_s23597_p1 df_t724772695_s23599_p1
$
Restoration started...
I did the following
RMAN> CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' clear;
old RMAN configuration parameters are successfully deleted
released channel: ORA_DISK_1
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO NONE;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/t24/rman/%U';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/glosoft/oracle/oracle10g/product/10.2.0/db_1/dbs/snapcf_hilalrac.f'; # default
rman>exit
$rman target /
rman>
$ rman target /
Recovery Manager: Release 10.2.0.4.0 - Production on Thu Sep 23 19:30:24 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: HILALRAC (DBID=2934614354, not open)
RMAN> restore database;
Starting restore at 23-SEP-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=159 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00003 to /u01/oradata/hilalmisdata/sysaux01.dbf
restoring datafile 00008 to /u01/oradata/hilalmisdata/t242dxml007.dbf
restoring datafile 00016 to /u01/oradata/hilalmisdata/t242dxml003.dbf
channel ORA_DISK_1: reading from backup piece /t24/rman/df_t724770389_s23596_p1
Thanks again for everyone... :)
Thanks
KSG
Edited by: KSG on Sep 23, 2010 7:36 PM ***Restoration started*** -
Impact of Rman restore on test server.
Hi,
I am working on oracle 10g on linux 64 bit
I have rman backup from production database. Name and SID of production database is Prod1 and i want to to check this RMAN backup after restoring it on the other test server (VMDB) for Disaster recovery.
Now problem is that, i want to test it for DR, where i only need to run a script to restore and recover a database at the time of disaster in production site.
My disaster recovery site will be in different network, so i can keep the name of database and sid same as of Production but is it possible that i could install the database in test database with same db name and same sid as of Production when Test and Production database are in same network.
What will be the steps if i want to have a single script to restore database to new server. Do i need to create database with installation of Oracle on test machine or RMAN script will create database by itself.
Do i need to set same dbid as of production in test database before restore. What can be the problems when i have production database running and i am restoring backup of same database on test machine with different IP address but same database name and SID and setting same DBID. I am not using catalog
I have a full backup of database +Auto backup of controlfile and spfile
Production database is being accessed by client via TOMCAT server.>
is it possible that i could install the database in test database with same db name and same sid as of Production when Test and Production database are in same network.
>Yes it is possible.
>Do i need to create database with installation of Oracle on test machine or RMAN script will create database by itself.
>
There is no need to run CREATE DATABASE. Running the right RMAN RESTORE statements will recreate database control files, datafiles and redo log files.
>What will be the steps if i want to have a single script to restore database to new server.
>
Note that in case of disaster recovery, you must make sure that RMAN backups are available from test server.
You can try to apply following example to your environment:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov.htm#BRADV156
>
What can be the problems when i have production database running and i am restoring backup of same database on test machine with different IP address but same database name and SID and setting same DBID. I am not using catalog If you are not using RMAN catalog, risks are limited: you should take care at least:
1. that Oracle Net configuration files (tnsnames.ora) used in production are not updated
2. that any tool/script you are using to manage (monitor, backup, etc.) the test database does not interfere with the production database.
Maybe you are looking for
-
A few questions from possible Apple TV newbie
Hi all, I am interested in buying Apple TV and have read the product description on the Store section.I have a few question as I don't quite get how it works. I watch digital/freeview TV currently on my iMac using a USB eye-TV thingy. Works Great! I
-
Progress of Zipping of folder on ProgressMonitor??
Hi all friends, I am facing problem with showing the progress of zipping of folder for that Iam using ProgressMonitor.I am really confused what will be the code for that I have tried with my below codes but couldn't slove my problem.My below codes zi
-
When I open attachments some text is garbled
I am a real estate broker and i receive listings from our MLS system via Outlook. If I open them with IE, i have no problem. But with Firefox the text in the fields is all garbled. This happens all the time. I do not wish to use IE. Please Advise.
-
Hi all I'm fetching my mails from Gmail with offlineimap. All mails goes to /home/niels/Mail/INBOX I would like to have conky showing me the amount of new mail. background no out_to_console yes update_interval 1.0 total_run_times 0 use_spacer no mail
-
I'm trying to remove my Windows partition and delete Boot Camp altogether off my laptop. When I try to remove the partition, I get an error saying "An error occurred while restoring the disk to a single partition." Can someone please help?