RMAN start_time and End time in Oracle 9i .

Hi ,
To find exact time duartion for RMAN backup on 10g i used following query .
select operation, start_time, end_time from V$RMAN_STATUS where start_time > sysdate -1 and operation='RMAN' ;
But in Oracle 9i v$RMAN_STATUS view doesn't exist .
How to find exact start-time and completion time for each Daily backup on Oracle 9i.
Thanks .

Hi,
You can use the public synonym V$BACKUP_PIECE. It will give the information for all backup pieces start time, end time and all other related information to the backup.
Regards

Similar Messages

How to return start and end time in Unix epoch format

Hi: I have a integer field (utime) in a table that stores the UNIX epoch time for a record. Every sunday around 2:00AM, I am running a query which should return records from last week. I want my condition to have the following in it's where
WHERE utime between
(convert sysdate-7 12:00AM to Unix time)
AND
(convert yesterday 11:59PM to Unix time)
Can someone help me create this convert?
Thanks
Ray

Yes, you seem to have worked out the logic of the expression correctly. Though, in your earlier post you had said that you want records within the range:
WHERE utime between
(convert sysdate-7 12:00AM to Unix time)
AND
(convert yesterday 11:59PM to Unix time)But now you are adding 14400 (4hrs) and deducting 72000 (20hrs) in your expression
SELECT * from TABLE
WHERE utime between
((TRUNC(SYSDATE,'DD')-TO_DATE('01/01/1970','MM/DD/YYYY'))*(24*60*60))+14400 AND
((TRUNC(SYSDATE-6,'DD')-TO_DATE('01/01/1970','MM/DD/YYYY'))*(24*60*60))-72000;Which makes your new condition to be:
WHERE utime between
(convert sysdate 04:00AM to Unix time)
AND
(convert sysdate-7 04:00AM to Unix time)
Are you sure you need records from 4am-to-4am and not midnight-to-midnight? And yes, with BETWEEN condition you need to use expression '<low-value> AND <high-value>' and not '<high-value> AND <low-value>'!
Besides this,
1. You might want to use bind variables rather than hard-coded expressions in your statement. Infact your expression uses SYSDATE, so Oracle would need to get current SYSDATE for each row to evaluate the expression. Which is going to have its impact on performance. As your start-time and end-time values are not dependent on table data maybe you could have a code like this (assuming it is PLSQL code):
start_time constant number := (convert sysdate-7 12:00AM to Unix time);
end_time constant number := (convert yesterday 11:59PM to Unix time);
<DML or Cursor with condition>
WHERE utime between start_time and end_time;
2. You said that your table already has values in unix-epoch-time in column 'utime'. How are these values inserted in the first place? Is there a function in your application that converts any given time to unix-epoch-time? Is yes, then use that in your code.
3. If such a function does not exists, than rather than using hard-coded expressions it might be a good idea to create new functions for converting to and from unix-epoch-time and to get current unix-epoch-time from server.
Using a function in the above case:
start_time constant number := f_convert_to_unix_time( trunc( sysdate-7 ));
end_time constant number := f_convert_to_unix_time( trunc( sysdate )) - 1;
<DML or Cursor with condition>
WHERE utime between start_time and end_time;
And lastly, some of us might not know about Unix time, so here is a useful link http://en.wikipedia.org/wiki/Unix_time

Start and end time for a mapping in process flow

We are executing 6 mappings in a process flow. 4 out of 6 run in parallel . The log file created in a control center denotes start and end time for a process flow. But Is there any way to find out how long those individual mappings took ? Is start/end time logged on a mapping level somewhere ?
Thanks

As well as the repository browser you can use the SQL Developer reports on the utility exchange which are based on the public views.
http://www.oracle.com/technology/products/warehouse/htdocs/Experts/owb_sqldeveloper.zip
You can dig in and see how these are read from the SQL views.
Cheers
David

Editing Loop Start and End times via automation / MIDI controllers?

I'm trying to play a sample in EXS24 and have the Sample Start, Loop Start and End times manipulated over the course of the song. I've tried to open up the EXS sample editor, click on the numerical value of the Loop Start, and then attempt to Learn Automation. All it does is assign the knob for the instrument Volume Level. Is there any way to do this? It's basically how an Akai S612 works: http://www.vintagesynth.com/akai/s612.shtml
I switched gears and tried it also with Battery, and there's a way to map the Start and End times in there, but it's not seeming to work as I've intended. I can't seem to make the loops move as they should and there's ways to use up to 4 loops, but not a way to target each loop's start and end points via separate controllers.
I could use my S-612 [and probably will], but in moments where I don't have one available, I'd love to find a solution to this.
Thanks,
+odd

Anyone with any thoughts? would be great to solve this.

Is there a way to enter an event time in Calendar as a reminder for me and NOT have Calendar erase it in the info as it reads it into the event start and end times?

Calendar can recognize and derive event start and end times from the text description entered. However, when it seizes on a time (start and/or end) and automatically enters it as the start and/or end time, it also (sigh) deletes the time from the text. I enter the times as reminders for me, how can one prevent them from being deleted by Calendar??

I am having the same darn problem. I really dislike this auto feature in Calendar.
Can anyone help us please?

Month View:start and END times

Here is feature that i really need In the Month view: The option to have start and end times displayed. Now that their is no info drawer i have open and info drawer to see when the event is supposed to end. I have a lot of events in a day and some are for me and some are for my company and some are for my wife.
I need to see the start and end time quickly. Outlook does it.
Please make iCal do this incredibly useful view option.

Start times are still viewable.
It is a click box in the preferences that says show time in month view.
What i need is the END time as well.
I learned that the best place for this kind of discussion is on the feedback line for ical
http://www.apple.com/feedback/ical.html
Just tell them the features you need or miss. Please click the link and tell them what you think of iCal.

ESS Working Time - Start Time and End Time in Weekly View

Hello,
I'm having a problem with the business package ESS - functionality Working Time (cat2).
I need that information to Start Time and End Time appear in the Weekly View of the portal.
In Daily View that information are already visible, but In Weekly View that information does not appear.
Does anyone have any suggestions?
Thank you very much your attention.
Att,
Jair de Oliveira Junior

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

Showing start and end time in month view? And email like notifications ?

1- How to you set event so that they show the start and end time in month view?
2 - I have a little "1" on my iCal icon in the dock what does that mean? There is also a little one in the line of one of my calendars? I know I should know this but I am at a loss/

FDWifeCFD,
1- How to you set event so that they show the start and end time in month view?
AFAIK, this is not a feature of iCal.
2 - I have a little "1" on my iCal icon in the dock what does that mean?
That means an iCal invitation has been sent. Click the small envelope icon on the bottom right of the the screen to view the notification.
There is also a little one in the line of one of my calendars?
That represents the current time of day in the Day/Week view.
;~)

How to get start and end time of an ESB instance in SOA 10.1.3.4

Hi All,
I am using soa 10.1.3.4 and want to track the esb instance start and end time. (For example, in case of bpel we can query the cube instance table to get creation and modify time of an instance. )
How to get that in esb?
Thank you.
Regards,
Satish

Hi Satish
You may enable instance tracking option on the ESB Console and track the instances audit information and also from the logs(log.xml) when ESB loggers are set to DEBUG mode.
Regards
A

Media Start and End times have changed.

Hello,
I have an old project from which I off-lined all footage to save disk space. I only saved the Project files. Now when I open the project to do some changes I naturally have to recapture the original footage. The problem is that some clips have weird media start and end times that don't match the time code on the tapes. Therefor I cannot batch capture them, and the referenced cuts on the timeline reflect these weird time codes as well. Can anyone tell me why this has happened and how I might work around it so I don't loose my edits. Please and thanks!

anybody have a solution to this yet?
I opened up an FCP4.5 project into 5.1.4, batch captured some clips, and it changed the Media Start times to 00:00:00;00, and the Media End times then matched the Duration times.
Anybody know how to prevent this? How about how to repair it?
In case this matters, or is relevant, when I do a Batch Capture of a clip, it is playing it TWICE in the capture process. No dropped frames along the way, it just plays through it in normal stuttery capture mode, rewinds, plays through again, leaving successful Capture (though with aforementioned Media times problem AND with occasional audio/video out of sync).

In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.

Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Is there a way I can have my form calculate a total time from beginning and ending time?

Is there a way I can have my form calculate a total time from beginning and ending time?

Sorry, but Formscentral doesn't support either a timer function or any kind of calculation. You might be able to do this if created your form in PDF. For help with PDF form creation in Acrobat I suggest you repost your question to the Acrobat Forum.
Andrew

Hide the start time and end time in ESS portal

Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin Weakley

Hi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas

SCSM 2012 Change form issue - Scheduled start and end times default to 12:00:00

I have a report that the Change Form in SCSM 2012 is not allowing users to set the scheduled start and end times. The date stays correct, but the time reverts back to 12:00:00, and the user has to save to the initial form, then re-open and
change the times.
I checked in the authoring tool, the time/date field is set to full date and time. (I think these are custom fields)
I am not sure where else to look to adjust any settings as needed.
Thanks for any assistance.
Joshua Fuente

Hi Joshua,
Is this situation on all consoles or few ones? Check the time format on the user's PC. 24h or 12h could affect the DateTime control's behavior.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Facebook:

Hwo to obtain the DST start and end times

Hi all -
Is there a way in java to obtain the day light saving start and end times for a certain year for US?
I know that US DST changed in the year 2007 so, I am wondering if I can get correct DST start and end times for certain period before 2007 and after 2007.
I read online that JDK preserves historical DST rules so I am hoping this is possible but do not know how.
Thanks,

Any idea is appreciated [otehr than incrementally iterating through each hour of the year to know the transition time !!!! )
That's why I mentioned +dichotomy+ (EDIT: the english wording is +binary search+ ): set the initial date to Jan 1st, 00:00, then add 183x24 hours (half a year), if the hour has changed (which it will), there was a DST change in the first half of the year. Then substract 92x24 hours (a quarter of a year) from this new instant, if the hour has changed, the DST change was in the 2nd quarter, else it was in the first. Then add or substract 46x24 hours,... and so onEdited by: jduprez on Feb 2, 2011 9:15 AMWARNING: for anyone reading this in the future: this algorithm is flawed, unless there is further guarantees in the problem domain of DST rules:- if the DST shifts (up +1 hour then back) are less than 6 months apart (obviously it may occur, with a one day margin)- and if in some odd timezone DST shifts may occur around mid-yearThen the first binary chop could find the same hour at both ends, and miss both shifts.My apologies for posting not-well-thought suggestions...

RMAN start_time and End time in Oracle 9i .

Similar Messages

Maybe you are looking for