RMAN-target database not found

Hello All:
we have rman config (0 level bkp) for our PROD backup, rman catalog is on a different server. running OK. heaving 0 level backup of our PROD.... no issue.
Now we have one more PROD db implemented recently for payroll on seperate server, so we decided to have rman backup of this also.
we set that rman script to here also and made the neccessary changes.
It is heaving backup, archive backup ... no issue ...
but it error while "RMAN Catalog resync"
that part from script is
## RMAN Catalog resync ##
rman log=/u01/bkp/logs/backup_resync.log << EOF
connect catalog rman/rman@rman
connect target /
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u01/bkp/backup/ctrl_%F';
resync catalog;
EOF
and the error on log file "backup_resync.log" getting:
Recovery Manager: Release 11.1.0.6.0 - Production on Fri Aug 10 04:25:04 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: ORCL (DBID=2588904899)
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 08/10/2012 04:25:29
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
RMAN>
Recovery Manager complete.
plese suggest on this, i googled, saying to register the catalog, tried but no luck....
thanks in ADV
Edited by: DOA on 9 Aug, 2012 10:16 PM
Edited by: DOA on 9 Aug, 2012 10:17 PM

Hello vreddy,
Thanks for the reply...
I am bit new with the rman word....
I tried command on server where catalog exist (stating: my PROD and catalog exist on different different server)
(orcl is my PROD db name)
rman target / catalog ORCL
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Aug 10 10:57:29 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: RMAN (DBID=1583459273)
recovery catalog database Password:
asking for some password, which password here we need to supply ?
for more clear picture I also execute command on catalog side:
SQL> select name,DBID,RESETLOGS_TIME from rc_database order by 1;
NAME DBID RESETLOGS
PROD 4247251480 12-MAY-04
RMAN 1583455429 02-JAN-09
db ORCL is not there in the list....

Similar Messages

RMAN-20001: target database not found in recovery catalog

I am practicing loss off all control files. I have rman catalog backups which are set to autobackup controlfile. So far I did this.
RMAN> startup nomount;
Oracle instance started
Total System Global Area 209715200 bytes
Fixed Size 1272864 bytes
Variable Size 155190240 bytes
Database Buffers 50331648 bytes
Redo Buffers 2920448 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-SEP-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
recovery area destination: /u02/flash_recovery
database name (or database unique name) used for search: TEST
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: /u02/flash_recovery/TEST/autobackup/2009_12_09/o1_mf_s_705171034_5l0kgv4o_.bkp
channel ORA_DISK_1: control file restore from autobackup complete
output filename=/u02/control_files/TEST/control02.ctl
output filename=/u03/oradata/TEST/control03.ctl
Finished restore at 08-SEP-10
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/08/2010 14:54:50
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
I am assuming this has something to do with DBID but ... I don't have it and I don't know how to find it.

Hi BelMan,
Here is output
BS Key Type LV Size Device Type Elapsed Time Completion Time
56869 Full 11.20M DISK 00:00:00 08-SEP-10
BP Key: 56871 Status: AVAILABLE Compressed: NO Tag: TAG20100908T135312
Piece Name: /u01/oracle/product/10.2.0/db_1/dbs/cf_c-549414289-20100908-00
Control File Included: Ckp SCN: 125665520 Ckp time: 08-SEP-10
BS Key Type LV Size Device Type Elapsed Time Completion Time
56993 Full 11.20M DISK 00:00:00 08-SEP-10
BP Key: 56995 Status: AVAILABLE Compressed: NO Tag: TAG20100908T142547
Piece Name: /u01/oracle/product/10.2.0/db_1/dbs/cf_c-549414289-20100908-01
Control File Included: Ckp SCN: 125668490 Ckp time: 08-SEP-10

RMAN-20021: database not set

Hi All,
We have database Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production running on RedHat edition 4.
I have done incomplete recovery of database to previous incarnation using autobackup controlfile with RMAN, opened database with resetlogs everything went fine. database is up and running. Now when i tried to take backup of the database i have received following error
Starting backup at 29-APR-08
current log archived
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 04/29/2008 19:21:21
RMAN-20021: database not set
RMAN> set DBID=279496673
executing command: SET DBID
RMAN> backup database plus archivelog ;
Starting backup at 29-APR-08
current log archived
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 04/29/2008 19:22:46
RMAN-20021: database not set
RMAN> backup database;
Starting backup at 29-APR-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 04/29/2008 19:23:48
RMAN-20021: database not set
RMAN-06031: could not translate database keyword
Can anyone please advice as what is reason behind this error. searched on the internet but nothing found rather than contacting oracle support
Regards
Vinay

Sorry forgot to add some information.
before recovery we were using recovery catalog which was on the same database.
while doing recovery restored controlfile by
RMAN> restore controlfile from '/oracle/oradata/envdvp/backup/controlfile/C-279496673-20080429-18';
and then performed restore and recovery operation

RMAN saying database not started??

Hi there,
If I log into my database through OEM, it connects fine.
Through Unix, I set my SID and type in:
rman target /
It connects me to rman but says: connected to target database (not started)
I then try and run a crosscheck archivelog all and it says this:
Erro message stack....
failure of crosscheck command
automatic channel allocation initialization failed
could not obtain a fully authorized session
ORACLE not available
shared memory realm does not exist
Linux Error: No such file or directory.
Any thoughta on what is going on here?
Thanks in advance!

herb:oradbp2 ~$ id
uid=500(herb) gid=501(dba) groups=501(dba)
herb:oradbp2 ~$ env | sort
_=/bin/env
DISPLAY=oradbp2.lilydale:33
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/herb
HOSTNAME=oradbp2.lilydale
INPUTRC=/etc/inputrc
KDEDIR=/usr
LANG=en_US
LD_ASSUME_KERNEL=2.4.19
LD_LIBRARY_PATH=:/d01/app/oracle/9ise/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=herb
LS_COLORS=no=00:fi=00:di=00;33:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/herb
ORACLE_BASE=/d01/app/oracle
ORACLE_HOME=/d01/app/oracle/9ise
ORACLE_SID=LSDB
PATH=/d01/app/oracle/9ise/bin:/d01/app/oracle/9ise/OPatch:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/herb/bin
PWD=/home/herb
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=::ffff:10.1.6.200 50766 22
SSH_CONNECTION=::ffff:10.1.6.200 50766 ::ffff:10.1.0.193 22
SSH_TTY=/dev/pts/1
TERM=xterm
USER=herb
herb:oradbp2 ~$ ps -ef | grep -i pmon
herb 1934 1 0 2010 ? 00:02:32 ora_pmon_lsdb
herb 3984 3359 0 11:06 pts/1 00:00:00 grep -i pmon
herb:oradbp2 ~$ ls -l $ORACLE_HOME/dbs
total 18960
lrwxrwxrwx 1 herb dba 53 Dec 4 2008 initanalyzer.ora -> /d01/app/oracle/admin/analyzer/pfile/initanalyzer.ora
lrwxrwxrwx 1 herb dba 49 Nov 12 2008 initcit1p1.ora -> /d01/app/oracle/admin/cit1p1/pfile/initcit1p1.ora
lrwxrwxrwx 1 herb dba 45 Oct 25 2008 initlsdb.ora -> /d01/app/oracle/admin/lsdb/pfile/initlsdb.ora
lrwxrwxrwx 1 herb dba 45 Nov 22 2008 initpvsp.ora -> /d01/app/oracle/admin/pvsp/pfile/initpvsp.ora
lrwxrwxrwx 1 herb dba 43 Nov 12 2008 initrep.ora -> /d01/app/oracle/admin/rep/pfile/initrep.ora
-rw-rw---- 1 herb dba 24 Dec 13 2008 lkANALYZER
-rw-rw---- 1 herb dba 24 Dec 12 2008 lkCIT1P1
-rw-rw---- 1 herb dba 24 Dec 9 2008 lkKRON43
-rw-rw---- 1 herb dba 24 May 18 2010 lkLSDB
-rw-rw---- 1 herb dba 24 Dec 13 2008 lkPVSP
-rw-rw---- 1 herb dba 24 Dec 12 2008 lkREP
-rwSr----- 1 herb dba 2048 Dec 4 2008 orapwanalyzer
-rwSr----- 1 herb dba 2048 Nov 12 2008 orapwcit1p1
-rwSr----- 1 herb dba 2048 Nov 25 2008 orapwkron43
-rwSr----- 1 herb dba 1536 Oct 25 2008 orapwlsdb
-rwSr----- 1 herb dba 2048 Nov 22 2008 orapwpvsp
-rwSr----- 1 herb dba 2048 Nov 12 2008 orapwrep
-rw-rw---- 1 herb dba 4718592 Mar 10 2009 p1k9ipga_1_1
-rw-rw---- 1 herb dba 1630208 Dec 12 2008 snapcf_analyzer.f
-rw-rw---- 1 herb dba 1630208 Dec 11 2008 snapcf_cit1p1.f
-rw-rw---- 1 herb dba 1679360 Dec 9 2008 snapcf_kron43.f
-rw-rw---- 1 herb dba 6397952 Jan 16 18:27 snapcf_lsdb.f
-rw-rw---- 1 herb dba 1630208 Dec 12 2008 snapcf_pvsp.f
-rw-rw---- 1 herb dba 1630208 Dec 11 2008 snapcf_rep.f
-rw-rw---- 1 herb dba 2560 Oct 25 2008 spfilelsdb.ora.bak

Datasource: ORA-02019: connection description for remote database not found

Hi,
I recently made the datasource to point to a new host, and using the EM console tested the connectivity to the datasource to be successful.
Java code that refers to the DS is also the same as before that was working as only the connection string has been changed, but now trying to access the web-application shows the following error in the logs:
==============
Exception::java.sql.SQLException: ORA-02019: connection description for remote database not found
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:431)
oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1029)
oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:463)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1126)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
oracle_jdbc_driver_T4CStatement_Proxy.executeQuery()=====================================
What could be the reason? Is there any other app server datasource related setting that needs to be done or is it some other issue - as I said 'testing the connection from EM console connects successfully'.
Thanks,
Rommel.

The issue is resolved now.
One of the queries used a db link that was missing on the new database and therefore the error from the java code.
Since testing for connectivity using DS through EM console does not check for any db link (using the default query it executes) connectivity was successful.
Thank a lot,
Rommel.

'Connection Description for Remote Database not found' Error

Hi All,
I have an interface that loads Oracle DB from an Oracle source(JD Edwards). It is mostly one to one mapping of the columns, and is utilizing LKM Oracle to Oracle(DBLink), IKM Oracle Incremental Update and CKM Oracle.
I am getting an error when executing the interface which states 'Connection Description for Remote Database Not Found' at the 'Insert Flow into I$ table' step in the Operator logs.
The below is the content of the error:
2019 : 42000 : java.sql.SQLException: ORA-02019: connection description for remote database not found
java.sql.SQLException: ORA-02019: connection description for remote database not found
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.j(e.java)
     at com.sunopsis.dwg.cmd.h.z(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Please advice me on the correction.
Many Thanks!

Hi All,
I am seeing things are working fine, when I am using LKM SQL to Oracle in combination with IKM Oracle Incremental Update. It is only in the case of using LKM Oracle to Oracle(DBLINK) in combination with IKM Oracle Incremental Update, that the above mentioned error is thrown.
Please suggest on the resolution in using LKM Oracle to Oracle(DBLINK) with IKM Oracle Incremental Update...
Thanks!

Sap Tutor Installation error "target installation not found"

Hi All
I am getting an error when ever i am installaing SAP tutor full in WIN2K3 saying that
"Target Installation Not Found"
But when i am installing on windows XP there was no problem.
Please suggets
Sudhakar A

Dear Sudhakar,
You downloaded patch of tutor not SAP Tutor for this reason you are receiving this error message.
Download SAP Tutor from https://websmp201.sap-ag.de/~sapidp/011000358700001572552002E
Regards,
Nikunj Thaker

Shared services database not found in the specified database

Hi Guys,
In Hyperion EPM System confirurator,i gave all the fields and click next button it show error message "Shared services database not found in the specified database"

Hi ,
1. Pls confirm me one thing. Did you re -install version 11.
2. Re intstallation of version 11 has lot of issues ( atleast 11.1.1.1).
Sandeep Reddy Enti
HCC
http://hyperionconsutlancy.com/

Specified database not found

Hi!
Well, one old subject, I recall (had this written here long time ago) -- ZCM 10.3.4, trying to backup db from command-line, but ...
SQL Anywhere Backup Utility Version 10.0.1.3960
Specified database not found
DB is there and accessible and running and ZCC is ok and ZCM does work and db is via Sybase Central accessible etc. and probably when I restart ZCM services on server it will be backed up also with utility, but ... any ideas how to accomplish this wo services restart. Can't dbping server. Server name is also written ok in command etc.
More thanks, Alar.

NovAlf,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Physical database not found

Post Author: madan.76
CA Forum: Data Connectivity and SQL
Hi All,
I'm facing this problem. When I run my Crystal Report in it give error "Physical database not found", but all database related settings are correct, I'm using Access 97 database.
Anybody provide solution for this.
Thanks
Madan
[email protected]

My solution:
Copy p2bbde.dll to windows dir, system and system32
Ciao,
Willy

Physical database not found error in Crystal Reports 8.5

We have products in the field with Crystal Reports 8.5 runtime files that have stopped working and now give us an error that says. 'Physical database not found'. Started last July, 2009. We now know that this error now appears on several other sites. This used to work but doesn't anymore. Please provide the exact runtime file procedure so we can get these sites up and running again.
Thanks,
RMECHL

Using Procmon (Process Monitor from sysinternals.com) I determined the problem was that a file had been removed somehow that was required. The file name was p2ssql.dll
RMECHL

ORA-0209:Connection discription for remote database not found

Please help me with this oracle error.
I have create a DB link to connect to the Oracle database from a remote Oracle DB. I am able to query the select statement through DBLINK and i also created the Synonym for the same. But still iget the below error in the DB package when i am inserting one row into the same table for which i created a synonym with the DBLINK
ORA-0209:Connection discription for remote database not found
ORA-02063:preceding line from DBLINK
Please help me if anyone can give me a appropriate answer.
Thanks in advance for all those who try to help me

Sorry for the Typo mistake ..
The ORA error code is not ORA-0209 but it is ORA-02019

Error - Launching ConsoleOne Domain Database Not found

Normally working fine, just recently the gwia message is messing up preparing messages to go out. Tried to launch ConsoleOne and it says the Domain Database not found, click OK try again.... and I get ERROR OPENING DOMAIN DATABASE...
I ran GWcheck on the Post office, and it ran ok...
What next?

usadavidh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

[SOLVED] pacman error: database not found (during an install)

i am trying to install an app
when installing
# pacman -S /path/to/dir/app.tar.gz
error: database not found
when i look inside the tar, theres only one file, app.bin
im sure its some fundamental that im missing. so i have to makepkg first , or am i missing a command during the intallation, or is the file broken?
Last edited by wolfdogg (2011-06-04 05:50:09)

well, im geting some errors with the program, im wondering if i need to make a package? i think i will try that next.
heres the beginning of the log, Java errors mainly
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.equinox.ds
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Import-Package: org.eclipse.equinox.internal.util.event; version="1.0.0"
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolverError(AbstractBundle.java:1313)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolutionFailureException(AbstractBundle.java:1297)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:309)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:370)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1068)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:557)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:464)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:248)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:445)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:337)
ok, i downloaded a different binary of this program, and it installed successfully. thanks for the help
Last edited by wolfdogg (2011-06-04 05:49:37)

"Physical Database Not Found" at client pc. crystal reports 8.5 / VB 6 / Sql Server 2000

Hi All
I am using Crysta; Reports 8.5 with Visual Basic 6.0 and Sql Server 2000.
Report viewer is showing an error "Physical Database not found" when running at user's machine.
If i install the crystal reports, the reports shows perfect.
which are the files to be included for the deployment setup.
does anybody know how to solve this problem.
thanks in advance.
sam alex

My solution:
Copy p2bbde.dll to windows dir, system and system32
Ciao,
Willy

RMAN-target database not found

Similar Messages

Maybe you are looking for