RMBP CUDA Playback Serious Issues/Glitches

Just purchased a new rMBP and am running Premiere 6.0.2 and with CUDA 5.0.45 installed.  Here are the system specs:
- 756gb SSD
- 2.7 GHz Intel Core i7
- 16 GB Ram
- NVIDIA GeForce GT 650M 1024 MB
- OS X 10.8.3
I'm experiencing serious playback issues and crashes in premiere on both internal and exteranal display with both CUDA or OpenCL enabled.  With CUDA playback the monitor window turns black, freezes white, or gets replaced with content from other windows that are open.  It generally works great for a few minutes when I first open premiere, but then everything wigs out.  The timeline and audio will play, but no video shows up.  This generally causes the source window to freeze up as well.  In OpenCL, both the windows turn into digital glitching as soon as I open up premeire.  This has happened while testing RED 4k as well as Canon 5D MKiii 1080 footage.  The only way premiere is running smoothly is through the software only mercury playback.  I've disabled graphics switching, etc. and tried any fixes I've found so far, but no luck.
Here's another link to a similar forumn on Creative Cow that is discussing the same issue I'm having.
http://forums.creativecow.net/thread/3/930479
Any info would be awesome.  I have another few days to decided if I want to keep the computer or not with a full refund from Apple, so I'm trying to resolve any issues.
- Eli

Does rMBP mean some kind of Mac?
If yes, some saved links that may help
Mac & nVidia Driver http://forums.adobe.com/thread/1075592
Mac Retina Bug http://forums.adobe.com/thread/1159632
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

Similar Messages

  • Serious issues with AirTunes playback since "upgrading" to iTunes 7.3.2 (6)

    Dear All,
    I'd appreciate your help - I use iTunes a lot, and absolutely love it. Most of the time, I use my stereo for playback, via AirTunes. While the delay in connecting with the stereo has increased significantly over the past eighteen months or so (it used to take about one and a half seconds to connect to the speakers, whereas now, anything below ten seconds can be considered quick), and there seem to be some minor issues (after pausing, you cannot always resume the playback without switching to the MacBook's speakers, and then back to the remote speakters) that never really bothered me.
    Anyhow, since upgrading to iTunes 7.3.2 (6) three days ago, things have gone seriously wrong. I never had any playback issues in iTunes, even over very long periods of continuous use. Now, however, the playback just stops periodically, and sometimes restarts on its own after a second or two. Sometimes, however, it doesn't - and using the remote control to restart the playback doesn't work either.
    I should add that the hardware situation is unchanged, and that I always use my iPod, via my MacBook Pro.
    Thanks already for your help.
    Thomas

    Do you have ReadyBoost enabled on the PC? If so, by way of experiment, try disabling that as per the instructions from the following document:
    Troubleshooting iTunes for Windows Vista video playback performance issues
    ... any help at all with the performance issues?

  • Cuda playback mode is choppy but software playback is not ?

    Hi everyone, I'm having choppy playback only when on CUDA playback mode. if I choose software only playback is fine.
    any idea what can i do to fix it? it starts happens since I update to mavericks.
    only 1 layer video will do drop frames and freeze at 1080p 24fps
    I really want to use Cuda I used to do lots of AE stuff links and I used to playback lots of video layers with no problem,
    thanks!
    Mac Pro Mid 2010
    Processor  2 x 2.4 GHz Quad-Core Intel Xeon
    Memory  24 GB 1066 MHz DDR3 ECC
    Graphics  NVIDIA GeForce GTX 680 2048 MB
    Software  OS X 10.9.5 (13F34)
    SSD osx and SSD video drive raid
    premiere CC 2014 8.2.0

    Just want to report that I fixed the problem.
    the choppy issue starts after mavericks installation. at the time of the osx installation I download and install the cuda drivers that adds the CUDA icon on system preferences. That was enough for premiere to show cuda options as playback. But today I also did the installation of the Nvidia Driver manager from the nvidia website and that fixed the problem.

  • Non-English characters not displaying correctly - Serious Issue

    My corporate email is on a Lotus Domino server with Lotus Traveler installed.
    I have set my PlayBook (with OS 2) up to syncronize with the corporate email trough Active Sync (see http://alturl.com/qh3nn), which works perfectly.
    I have however noticed that in some emails special non-english characters are displayed correctly but in some emails special non-english characters are displayed as a black diamond with a question mark inside.
    This is of course a serious issue as most non English speaking countries use some special characters.
    When trying to understand this problem how can I analyse the emails and see what character set is being used?
    And of course better; has someone solved this?

    I am having the same problem. Is there any update available?

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • What program to use to repair a hard disk with "serious" issues?

    Norton Disk Doctor that came preloaded on my G3 iBook found some "serious issues" that must be repaired with Disk Doctor on CD-ROM. When I go to Symentec website to order Disk Utility Software on CD-ROM, I find only such utility software avilable for PC.
    Apple Disk Utility also found that this hard disc needs to be repaired, but the Repair button is not active, even when I restart the computer with OS X CD-ROM.
    Any suggestions, please?
    iBook G3   Mac OS X (10.1.x)  

    Hi, and welcome to Apple Discussions.
    Try starting up in Single-User Mode and running fsck. (File system check.)
    At the command-line prompt, type /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (nameofvolume) appears to be OK
    If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    *** FILE SYSTEM WAS MODIFIED ***
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in.
    This allows you to repair the drive without the CD or third-party software. If after multiple tries with fsck, errors remain, post back and we will explore other possible solutions.
    (Note: Information in this post is from Apple Knowledge Base article #106214.)

  • W540 + Ultra docks = big serious issue

    Hello everyone, We recently ordered 30+ x240s and w540 laptops using the ultradocks. Here's the prequel
    1. initially they had the issue with monitors going blank, that has been fixed with a firmware update
    2. there was a second firmware update ver 2.21 that fixes some issues with HP monitors. Ok , done.
    Ok now all is well, we have the x240s on the docks and w540s with their docks + the 175w powersupply supplies etc.
    Now we have users that wanted 27inch and some 30 inch monitors and a big big problem comes up.
    The docks cannot drive anything higher then those 24inch monitors (1920x1200). the 27 inch (2560x1440) and the 30inch (2560x1600) does not work AT all.
    it does not work with even ONE of those monitors hooked into the dock not speaking of the 2 that users wanted.
    So w540+ultra dock + 1 27/30 inch monitor = nothing, blank screen, go to display settings and it detects a grey option
    Now, the w540 without the ultra dock and hooked directly into a 27/30 inch monitor = no problem, we have full functionality.
    We have tried every combination to try to get it to work and it's a no go.
    Researched the dock's DVI port and see if we can possibly use that, nope, the DVI is only single link so our only option are the 2 display ports on the dock.
    Of course those don't work at all. We have opened a ticket with lenovo and it's been escalated, awaiting responds.
    This maybe a serious issue I am seeing here since we have 30+ docks and more coming. (yes we have tested on them all and their firmwares are 2.21)
    Anyways, if anyone has run into this please confirm. Suggestions are welcome, but I am sure we have tried just about everything.
    Thanks Everyone, J

    I was able to connect a W540 to an Ultra Dock (170W) in "Standard" mode and then get an external monitor working at a resolution of 3840 x 2160. The monitor is a Samsung U28D590D connected via the DisplayPort on the docking station. Note that "Advanced" mode was very unstable, and often crashed within a few minutes. Standard mode works when connected via DisplayPort but would also crash instantly and repeatedly if connected via HDMI.
    Tested with a variety of bios, firmware and driver versions. Including System BIOS v2.17 & v2.18. Docking station firmware v2.22 and multiple Intel and NVIDIA driver versions. None worked with HDMI or in Advanced mode. Hopefully this gets fixed at some point.

  • Premiere Pro 6.0.2 - no CUDA playback

    I'm on a Retina Display Macbook Pro with the latest CUDA drivers installed. I just updated to 6.0.2 this morning and got playback using all three new modes : Software, OpenCL, and CUDA. All three worked when I was using the internal Retina Display. When I connected the laptop to my two Apple Thunderbolt Displays ( chained together ), the CUDA playback no longer works. OpenCL and Software playback still work as expected.
    Is CUDA playback faster / lighter  on the system than OpenCL playback? I'm editing 5k .r3ds and would like to use whichever is faster.
    My guess is this is just a bug. Hoping Adobe sees this and fixes.
    Thanks.

    >similar problem
    Absolutely no way to help with such little information
    More information needed for someone to help... click these links and provide the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406

  • I think there is a bug in safari......Whenever i swipe my fingers for going to the previous page on safari the tabs open get hanged up and i have to restart safari.This is a serious issue.!

    Serious issue.....

    Might be a Safari extension issue...
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • HT201401 I am writing to bring to your attention a serious issue I had with your product. My brother  bought one iPhone 4, 16 gb mobile phone from US last year and gifted me in India. but it couldnt be serviced in India why ?

    Hi,
    I am writing to bring to your attention a serious issue I had with your product. My brother  bought one iPhone 4, 16 gb mobile phone from US last year and gifted me in India. In few months it had a problem with its home key. I took the phone to service service center and they told me that your phone is having hardware problem and as the phone is under warranty cannot be replace in India. You can come back when this is out of warranty. Now few days back when i walk again to the service center they stated that this phone we cannot repair here in India because of this phone purchased from US. 
    This a total disgraceful service from such a big brand like apple.
    I hope to hear back from you about this incident.
    Sincerely,
    Niranjan
    <Personal Information Edited by Host>

    No iPhone has a international warranty. Warranty is valid only in
    country of original purchase. Since iPhone was bought in the US,
    you must return the iPhone to the US. That means you must personally bring
    the iPhone to Apple in the US or send it to a friend/relative in the US for them
    to take to Apple. After replacement, your friend can ship it back to you. Shipping
    and insurance costs are your responsibility.
    Apple does not accept international shipments for evaluation/repair
    and will not ship replacements out of the country.

  • Serious issue in discoverer viewer

    Dear all,
    I have serious issue with discoverer viewer 9.0.2.53 version.
    I am in need of displaying lengthy worksheet in discoverer viewer,i am using crosstab format.
    my client wants to compare the datapoint value of worksheet with leftside drillup/down and top drill up/down values.
    I want the assumption of "display similar to desktop display of worksheet"..is it possible to have same type of format or alternative one by customizing viewer?
    Plz help me out of this..if viewer does not support this issue i think..its not best suited for report making..
    plz somebody confirm about this issue..its very urgent to proceed further...
    regards
    chandra

    Already checked that. I don't think the problem is color profile related.
    Besides, when I reset the viewer as described above the colors look perfectly fine.

  • Serious issue in delegated administration

    I have serious issue in delegated administration. i have created delegated admin
    role and assign to group. so that i should be able to view/modify only that
    group, but i can view/modify using API all groups irrespective whether the role
    is assigned or not for a group.
    I have scenario like this.
    1. Create a group called "officeAdmin"
    2. Create a group called "users" under group "officeAdmin"
    3. Create a user called "companyadministrator" under "everyone" tree structure
    of admin portal
    4. create delegated administrator role called "companyrole" for a user "companyadministrator"
    5. assign "companyrole" to group "officeAdmin". so user "companyadministrator"
    will be administrator for "officeadmin" group and its child.
    Now my requirements is when "companyadministrator" login i should get only groups
    which he can administer i.e in this case i should get only "officeadmin" and "users"
    groups.
    Please help me how i should programatically get the groups "officeadmin" and "users"
    when "companyadministrator" logs in.
    test the scenaio : create the above scenario using admin portal and then login
    as "companyAdministrator" and you can see only "officeAdmin" and its child groups.
    thanks, shashi

    Jeanne,
    Thanks for answering.
    I tried changing the setting Preferred Navigation Pane
    Format, however, the results were not satisfactory.
    What is the most interesting aspect of the second issue
    (broken Glossary pane) is that the issue exists in newer browsers
    or browser versions (on Linux an HP-UX) and that on Windows
    systems, the issue was not seen with all browsers which were
    tested.
    Has anybody else spotted these issues, too?

  • Serious issue with Mac OS X 10.6.4 and wireless networking

    Hello there, I'm having a serious issue with my TP-Link WP-8910G wireless router and Mac OS X 10.6.4 .
    Problems began some days ago. In short, after a certain period of time, my router drops the wireless connection out and, when I try to re-establish it, if a very short period of time has passed after disconnection Airport detects the wireless network and returns "connection timeout". If I wait more, no wireless connection is detected, and I have to reset the router and re-connect Airport. This is very annoying.
    How can I solve this issue?

    Have you verified that the router is not the problem?

  • BIOS non accessible after installing W10 x86. Serious Issue.

    Potentially a serious issue.
    From a "cold boot" (following a previous shutdown command) the BIOS is non accessible. The actual clickable text of "Press F2 to enter set up" is missing. This means that no recovery of this PC exists such as booting from
    a Windows disc or other bootable media.
    Fortunately, providing you can boot into W10 and do a restart, then the BIOS options appear.
    This means that if Windows didn't boot into Windows your PC could well become a brick.

    I hope I can help you about. I've note a funny thing on my PC: I have installed Windows 10 on a spare HDD, clean install on new formatted disk, without any other HDD inside. Later I've "shut down", unplugged all cables and removed
    from PC the Windows 10's HDD. I have then rebooted my PC on my usual HDD, it was telling me when pushing the power-on button "stepping out from hibernation". I've seen ~ this before in 7 and 8 installations (only). Not a BIOS/PC/HDD problem for sure.
    Maybe you have already done that before, sorry if my message is giving too much details, but I wouldn't want that you break something down on the process :-)
    Try to follow those steps in this order:
    1 - Remove all the medias connected (USB keys, CD, external HDD etc.).
    2 - Plug off the power cord, remove the battery, remove the HDD (usually is easily accessible from one side or from down-side of your laptop), wait for 4-5 minutes, then put in the battery (or the power cord) and try to power on your laptop
    without any HDD, USB key or DVD.
    Normally you should see the BIOS as usual, it will announce you that you have no boot media, or that there is an error and default settings were loaded. If so, power off, disconnect power source (cord and battery), plug in the HDD and
    restart the computer. If it's again blocking your bios, return to step 2 for removing the HDD. You may consider to thoroughly cleaning your HDD (including the MBR, formatting will not clear everything out, rather delete the partitions, re-create them, re-format).
    If 1 and 2 don't change the state of your BIOS, the error it's not connected with your HDD/OS installed. It just happened that starts just after you installing a new OS.

Maybe you are looking for