RMCVNEUF....billing document not updating

The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
Message no. M2210
Diagnosis
Data from documents used as a basis is required for the processing of billing documents.
System Response
The data in the billing document 9000878658 will not be updated
System Response
Ensure that all sales orders and delivery notes are processed before the billing documents.
NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
Thank you
Theresa

Note 142349 says
Summary
Symptom
If in the statistical setup of the sales information system you select option 'Redetermine update group', the following error messages may occur:M2206, M2207, M2208, M2209, M2210, M2211.
The documents specified in the messages may be displayed correctly during an update simulation.
Additional key words
OLI8, OLI9, RMCVNEUL, RMCVNEUF
Cause and prerequisites
During the redetermination of the update group in the reorganization, information from preceding documents is written to the intermediate tables MCVSRFK (document header) and MCVSRFP (document item), which are relevant for the determination of the update group of the subsequent documents.
Solution
To fill these intermediate tables, the reorganization of sales orders must be performed before the reorganization of deliveries or the reorganization of sales orders and deliveries must be performed before the reorganization of billing documents (in each case with option 'Redetermine update group'.
Note
After the successful reorganization the above-mentioned help tables should be deleted with report RMCVNEDE to avoid uneccessary data collection and the increasing loss in performance during the following reorganization runs.
thanks
G. Lakshmipathi

Similar Messages

  • Billing document not reversed

    Dear Guru's
    I am not  SAP consultant.
    Pls help me, previously i had reversed one  billing document through Vf11 ,then reversed VL09 delivery and cancelled the Sales order.But now billing document not reversed.Again go to reverse throuh VF11 Getting error as No billing documents were generated. See log
    Message no. VF032
    Swamy

    Hi malaini,
    thanks for your's reply.in this regards already i had reversed particular delivery , also sales order and deleted.But only think is now stock was not reversed and billing & accounting posting didn't reversed.customer balance is shown debit wrongly.pls advice.
    Swamy.

  • Billing document not relevant at delivery header level

    Hi,
    In one of regular scenario i got the Billing document not relevant at delivery header level in processing tab.
    can plz advice me that what's the cause for this ?
    I am using item category tan at both sales order and delivery level.
    Thanks
    Bhushan

    Hi Bhusan,
    Go to: VOV7
    Select Item Cat. as "TAN" and Double Click.
    In Tab: Business Data, Check the entry for Field: Billing Relevance.
    Entry must be "A - Delivery-related billing document"
    Another check:
    Go to: VTFL
    Select Delivery-Billing Combination.
    Go to Item (left-hand tree structure).
    Select Item cat. as "TAN".
    Here, in Field: Copying requirement, Check entry as "004 - Deliv-related item"
    Hope this may resolve the issue.
    Best Regards,
    Amit

  • Billing Document not generated.....

    Hi Gurus,
    When i am creating a Billing Document VF01....after completion of VL01n...the system shows an error Billing Document not generated...
    Please help me
    Rewards will be given

    To resolve the error, you can analyze account determination in the billing document. Process:
    Goto T.Code: VF02 & Enter Invoice number
    Next (On the top most strip) goto Environment
    Next (Select Environment) go to Account determination
    Next (In Account Determination) select Revenue Account Determination (first option)
    This will list all the condition types in the Billing document & analyze each condition & check for which G/L accounts is not determined.
    Possible errors:
    1. VKOA not maintained for required combination
    Solution: Maintain the combination in VKOA.
    2. Account Assignment of Customer / material not maintained in Customer / Material Master (If maintained in combination in VKOA).
    Solution:
    Option 1 (Standard solution):
    step 1: Cancel Billing Document --> Reverse PGI --> cancel Delivery --> Cancel Sales Order
    step 2: Maintain Customer master / Material Master correctly.
    step 3: Recreate sales Order --> Delivery --> PGI --> Invoicing.
    Option 2:
    Force the Account Assignment Group of Customer / Material through Debug in change mode of Billing document, which will release Billing Document to Accounting.
    3. Account Key not maintained in Pricing Procedure:
    Impact: This may create accounting document, but if condition type, which are to be posted to account, but do not have account key maintained in pricing procedure, it will not be post the relevant condition type to G/L account.
    From FI Side, you require to check that all the G/L account has been maintained through T.Code: FS00. G/L account being Master data has to be created in each client ot uploaded through LSMW / SCATT / BDC.
    In Billing Document in change mode (in the first screen where we enter Billing Document number), on the top most left hand corner, take a dropdown on Billing Document & select Release to accounting. Here you can get the under mentioned possible message:
    1. G/L account not found
    2. Cost Element not maintained for G/L account.
    In both the above cases, FI consultant requires to take corrective action.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

  • Billing Document not posted to accounting

    Hello All,
    Billing Document not posted to accounting & throws error , if trying to release in VFX3:-
    Document number 1001003528 in company code 0952 in fiscal year 2010 is affected
    Message no. FF099.
    Please advice.
    Regards,
    Vikas

    Hello Vikas;
    Maybe you are trying to post FI document which does not correspond to SAP standard.  
    Check if your document has 2 line items with the same tax code AA and tax        
    condition MWS (one tax rate 0% and 30 %, for instance). It must be either different   
    tax codes and or tax conditions.   
    Hope it can help.
    Ruy Castro

  • Reasons for billing documents not being created ?

    I am trying to create a billing document from a delivery (VF01). When I enter document number and save, it says 'no billing documents genereated, see the log'. Where to see the log and what do you think could be the possible reasons for billing document not being created ?
    Thanks in advance,
    Krishen

    Hi,
    In VL02 transaction, Its the 2nd button on the toolbar With an `!` mark on the icon along with triangle. CLick that button. It will display the errors bcz of which delivery is not created.
    In VL01, goto EDIT-> LOG.
    The explanation of errors is usually pretty detailed.
    Best regards,
    Prashant

  • RMCVNEUF - document not updated

    The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
    As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
    Message no. M2210
    Diagnosis
    Data from documents used as a basis is required for the processing of billing documents.
    System Response
    The data in the billing document 9000878658 will not be updated
    System Response
    Ensure that all sales orders and delivery notes are processed before the billing documents.
    NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
    Thank you
    Theresa

    Hi Cathy,
    It is genrated profit center document also but its not updated in Consolidation (Profit center dimension). If u have idea about this please help me.
    Thanks
    K.Satish

  • Field FKSTA- Billing status of delivery-related billing documents not getting updated

    Hi Experts,
    I have a requirement wherein I need to fetch the FKSTA - Billing status of delivery-related billing documents into the datasource 2lis_11_VASTI. I have checked a lot of threads on this topic but have not found a concrete solution yet.
    I have checked the settings in vov7 and vov8 and everything seems to be in place. I have also checked in table VBUP, when I filter based on field FKSTA = 'C', it shows me the outbound delivery document nos. But when I use the related sales document, it shows me blank values. VBUK as well doesn't show any values for field FKSTK.
    I would like to know how and where I can identify the 'billing status of delivery- related' document.
    I can see in VBUP table that if I enter the sales document no. related to the delivery document, it does not show the correct status.  I believe that the statuses should ideally get updated to the underlying VBUK and VBUP tables. Is there any way to update and align them?
    Is there a workaround, a similar field that i can use for datasource enhancement that will give me the correct values?
    Appreciate any help I can get on this as it is urgent.
    Thanks,
    AM

    Hi,
    You are correct that stauts is updated in table VBUK and VBUP.
    However, a sales order does not determine a billing status for delivery related billing, field
    VBUP-FKSTA is only determined for delivey.
    So, it is correct behavior that VBUP-FKSTA = BLANK when searching VBUP with
    VBUP-VBELN = sales order number.
    Just because of above reason, you will not find billing status field in VA03 -> goto header/item;
    you could only find billing status field for delivery in VL03N -> status overview.
    It seems that you are trying to find out sales orders that have been fully deliveried and fully billed, am I right? As far as I know, there is no directly table/field/tcode that could meet your requirement.
    You could consider following workaround:
    firstly, get a list of deliveries that have been fully billied(search VBUP with VBUP-FKSTA = C or search VBUK with VBUK-FKSTK = C);
    Secondly, using these deliveries to search table VBFA to find out related sales orders.
    Hope this helps.
    Best regards,
    Crystal

  • Billing document not posing (express document "update was terminated")

    Dear All,
    I am getteing error message while doing billing document  (express document "update was terminated")
    I tried billing document for 9 customers but only this error message getting 2 customers. this is the supplementary invoice(correction invoice)
    what is reason for this error, where is the problem.

    Hi,
    Thanks for response. number range assigned. because i have posted 10 customer invoices with supplementarty concept. i got error only for two customer. Invoice correction request number is generated but billing document number is not generated and it is giving error message as express document "update was teriminated" by author (only for two customers).
    So problem something else not in number range. pls suggest me on this.
    govindaraj

  • Accounting Document not updated after Vf01(billing)

    Hi Gurus,
    After creating invoice in vf01 when i m looking at accounting document, then my value is updated but the quantity is not updated in fb02.
    when i see table BSEG then the value of MENGE is not updated there.
    It is always coming ZERO.
    Thanks in advance

    Hi
    Please check whether FI doculments summarisation is active for this field under procedure VBRK.
    Regards

  • To make  the Billing document header  updated with the new VAT number.

    Hi Experts
    Due the business requirement we change the VAT number of  customers  for the European countries.
    And now how can we ensure that the Billing document header gets updated with the new VAT Reg.Number for the existing Billing documents.
    The intention is to ensure that when we Print an already existing invoice,the new changed VAT number should appear in the invoice output.
    Please suggest.
    Montee

    Hi,
       Have these documents been released to accounting? If yes then you have top canecl all the documents to update the billing documents and repost them with the new vat number. I think you might know how VAT gets determined in SAP. If not please go to SPRO-IMG-SD-BF-TAXES-MAINTAIN SALES TAX IDENTIFICATION UMBER DETERMINATION.
      1.  If the payer has a VAT ID number and RG <> AG, then the tax number
          and tax classification are copied from the payer (in this case, the
          ship-to party is not relevant).
          The tax number is taken according to the 'tax country of
          destination'.
      2.  If 1. does not apply:
          If the ship-to party has a VAT registration number and the sold-to
          party does not, tax number and tax classification are copied from
          the ship-to party.
      3.  If 2. does not apply:
          Tax number and tax classification are copied from the sold-to party.
      If you enter A, tax number and tax classification are generally copied
      from the sold-to party.
      The tax number is copied according to the 'country of destination
      relevant for taxes'.
      If you enter B, tax number and tax classification are generally copied
      from the payer.
      The tax number is copied according to the 'country of destination
      relevant for taxes'.
    Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • Financial Document not updated with Sale Order Number

    Hello,
    I wish to update the Financial document posting from the billing document with the Sales order and line item number against the revenue account.
    This is not populating in COBL-KDAUF. 
    I have seen some other messages concerning this, but none with answers. 
    Is this possible, I assume it is. 
    If so, are there any other necessary settings? 
    We are not using CO-PA, and I can get the reference number & /or allocation field to populate with the sales order number but not line item.  But I want the coding block filled so that BSEG VBEL2 is populated.

    Hi Roger,
    In the situation that you have a 1:1 relation this is possible with a substitution and look then to the order in the first line from the invoice.
    Where you can have a look to is the sumarization in FI and CO.  TC OBCY for VBAK and VBRK.
    Example:
    When you have 2000 posting lines in an invoice the system can create 1 posting line by used G/L account
    With this transaction you can set-up that there is create one posting line by:
    (G/L account)
    Sales order number
    You have first to look how your set up is. (perhaps when this is set-up correct you have already the order number in the field).
    Paul

  • Billing document not getting saved

    Hi Gurus,
            I am facing a problem with th billing doument. When I try to save the Billing through VF01, it is going to the screen and showing the line items in it. And when we save, it is generating a billing document number.But it is not getting saved.And when go and see in VF02
    it is showing a message <b>Express document "Update was terminated" received from Author----
    "</b>.
    How to resolve this.PLS help me out in this.
    Thanks in Advance
    Regards
    VASU

    Hi Vasu
    Check whether number range assignment has done.  Most probably, you would not have done that.
    Incidentally, I had also faced similar problem sometime back and after lot of study, I could come to a conclusion that it is because of non assignment of number range.
    Thanks and dont forget to reward if this helps you.
    G. Lakshmipathi

  • Billing document not getting created.

    Hello SAP gurus,
    I have a situation where billing document is not getting genrated. Its a delivery related billing and i have checked following.
    Sales order is complete
    Delivery is complete
    No billing blocks at header or item level
    GI is also done.
    However when i see in  delivery  go to --> item  --> processing tab and see at item status against billing document it shows blank(niot relevant for billing ) which i believe is not correct , it should either be A(not yet processed) , B(partially processed) or C(Fully processed) as the case may be.
    Also same staus under delivery ->goto -> header-> processing in overall status section.
    Want to know how these status are updatd from. Are there any standard programmes which can update these statuses.
    Or can anyone suggest anything else which i can check.
    Thanks in  advance.
    Vivek

    Hi,
    The Status in the table is updated by some settings
    1. Check in the VOV8 whether the Billing document  maintained or not in the field DELIVERY-RELATED Billing
    2. If the document is maintained then check whether the COPY CONTROLS maintained or not from DELIVERY TO BILLING in VTFL
    3. As also suggested check the Billing Relevance field in the VOV7 for your ITEM CATEGORY.
    Mainly the issue is due to not maintaining the COPY CONTROLS from Delivery to Billing
    you can get more details information on this issue when you try to create the  Billing manually from the Delivery document in VF01.
    It will give the Error Log
    Pleaes check and revert back if any of the above are not apt
    regards,
    santosh

  • Billing document not existing in SAP

    Hi,
      As per my understanding, number ranges are assigned internally  by the system for the billing document. Then how is it possible to miss one number inbetween.
    EG: i have a billing document with number 12,14,15, what happened to  billing document number 13. Please clarify under waht all sitaution a number is misssed though the number rangea are perfectly set.
    This is a high priority issue for us. request your help.

    Hello Prithika,
    There are a number of reasons why gaps in invoice numbers may occur:
    1. Object RV_BELEG is buffered. In this case the performace is improved
    but this gaps are produced.
    2. Update terminate/shortdump occures while billing document update.
    - the number is set in to the invoice at the beggining of the program
    If an interruption of the process happens after the assignation of
    this number, the number has run in the range and cannot be recovered.
    Update terminations in transaction VF01 and VF04. The billing
    document number is reserved prior to the update. After a possible
    update termination, it cannot be used again. Update terminations are
    displayed in transaction SM13. At present, there is no possible
    solution.
    3. Incorrect userexit, eg.in Program RV60AFZZ, USEREXIT_NUMBER_RANGE.
    Please check the following notes in order to solve this incidence:
    175047 Causes for FI document number gaps (RF_BELEG)
    19050 Gaps in document number sequence for billing docmt
    23835 Buffering RV_BELEG / Number assignment in SD
    As you might need to answer to the auditor on the gap of the invoices,
    report RFBNUM00 from note 175047 will help you to display
    document number gaps to the auditor if in your country the FI document
    numbers must be assigned continuously. You use this report to document
    the number gaps and the auditor will accept it.
    We know that in different countries you have to explain document gaps
    to Legal Authorities. For this reason there is report RFVBER00 to
    document gaps occured due to an update termination.
    As I already stated above report RFVBER00 does only list update
    terminations that are not older than 50 days (or according to what time
    is maintained in your system). So it could be that this log has already
    been cleaned up. It is necessary that these update terminations are
    documented before the 50 days expire.
    Or a second possibility is that the gaps occured NOT due to an update
    termination. Gaps without update terminations be (easily) explained.
    They can be (only) detected via report RFBNUM00. Report RFBNUM00 display
    these document number gaps for the number range object RF_BELEG.
    Thanks,
    Alex

Maybe you are looking for

  • How to add an orange link arrow on a report

    Hi forumers ! I added an orange link arrow on a simple report (just to know how to add the orange drill down link). My report displays the following fields: CardCode, CardName and Balance taken from OCRD table. I want to add a link arrow on CardCode

  • Things not working in IE

    i have a button that when clicked, displays a pop-up window with a form to fill out, well, in firefox and safari, it works fine, however in IE, its not doing anything, not even displaying a pop-up blocker message, the code is below. another problem,

  • First Stage Dealer Excise Invoice

    Hi, We get an Excsie Invoice (First Stage Dealer Invoice *** Challan) from a Vendor as per the below detail: Qty:                480 Rate:               114 Net Value:               54720 Assessable Value for Excise:      72480 Excise 10%:           

  • Searching Material in Purchase Order-- Urgent

    Hi, Is it Possible to search a material while raising Purchase Order by Material PO text. Actually the requirement is that while raising  PO, the users want to search the material by Material PO text since they put the technical description in this f

  • Filenames in modules

    Hi, we're porting an application developed with the open source Jonas EJB container and Tomcat servlet engine to iPlanet. The web application is based on the Jakarta Struts framework. Porting to iPlanet Application Server 6.0SP3 and iPlanet Web Serve