RMD metadata for R3D clip not always loaded

I'm getting a bug where 'sometimes' the RMD metadata for a clip is not automatically loaded by Premiere for R3D clips (from Red cameras).  I have to right click on the clip, select 'source settings', and then click on 'Reload from RMD'. 
These R3D files were trimmed in RedCine X.  Could that have anything to do with this inconsistency?

Check this thread in REDUSER Forum.

Similar Messages

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • Webpages do not always load 1st attempt after exch...

    I bought a new TP Link Router & dual aerial wireless USB adapters to solve my line speed issues as the old BT Home hub 1.5 cannot handle the new exchange.
    http://www.shop.bt.com/products/tp-link-300mbps-wireless-n-adsl-router-77S0.html
    Now some websites need to be either clicked twice or ctrl+F5 to refresh the page as it does not always load the first time which is weird also getting random disconnects which do not last long then it auto reconnects!
    Please does anyone have any advice for me on what to look at I am now plugged direct into the BT master socket & using wirelsss but even using wired its the same issue.
    Download speeds are around 1.3Mb up are around 1mb. Still in the line learning phase as its only been 5 days since I plugged this new Router in could it just be natural for that to take longer to stabilise???

    P-a-u-l wrote:
    I bought a new TP Link Router & dual aerial wireless USB adapters to solve my line speed issues as the old BT Home hub 1.5 cannot handle the new exchange.
    I am surprised as all variants of the Hub are compatible with Bt BB (with the exception of Infinity)
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • BCExeption: The IDOC metadata for null is not available in SID

    <h3>Hello Guys,</h3>
    we need some information about the error message:
    com.wm.pkg.sap.BCExeption: The IDOC metadata for null is not available in <SID>
    We use a Business Connector 4.8 and the backend is an ECC 6.0, we have an inbound xml scenario with FTP.
    We pick up the ORDRSP from the vendors ftp-server and we would like to drop it to our backend system.
    We can read the xml file into a string, but not send to the backend system, we use following steps:
    - bytesToString
    - stringToDocument
    - documentToRecord
    - recordToIDOC
    - lockSession
    - createTID
    so far works perfekt
    - sendIDoc
    - releaseSession
    On the step "sendIDoc" we see the described error message, but what is the message from the message?
    Any Ideas?
    Thank you and regards,
    Michael

    Hello Michal,
    thank you for your quick answer!
    In my opinion, i don't need any input for this service, because we pick up all data from the vendors ftp - server in a definied time interval.
    All needed fields are available in the xml file. In the result tab is the IDocList filled correct, but no sending to the backend system because the error is displayed.
    Is it a problem with my concept?
    Regards,
    Michael

  • Flash xml - not always loading

    Hi
    I have a calculator that loads an xml file which contains a
    load of factors. If the user changes their details (age or sex)
    then it reloads this xml file to pull out the relevant factor.
    On my local disk this works fine. However, when on the server
    it will work 1 or 2 times accessing and parsing the xml file
    perfectly, but then will stop working and freeze for a while. It'll
    then work again for 1 time and then stop again and so on. I've
    attached the code that loads the xml file.
    The strange thing is that whether it's working or not it
    loads a 0 error code thing (success) and doesn't display "document
    failed" - but with the line of text I added to access
    childNode[50], it works ok 1 or 2 times, but is undefined when the
    calculator freezes.
    It seems flash is being a bit hit and miss at loading the xml
    file properly. Once it's loaded into flash should it be continually
    available or do I need to keep reloading it every time they change
    their details? If it's always available, that also doesn't seem to
    be working!
    Any ideas?

    I have solved this I think - not entirely sure how.
    In the above code links to a function called processBook and
    passes through the value of book_xml. In declaring the processBook
    function I pull this into xmlDoc_xml (function
    processBook(xmlDoc_xml). Not entirely sure why as I borrowed that
    bit from a book.
    Anyway, I've removed the reference to xmlDoc_xml and replaced
    it with book_xml and it seems to work perfectly. I believe it the
    reason is that when it goes back to that function it looks for
    xmlDoc_xml which is only available the first time... something like
    that anyway...
    Thanks

  • Why does Sync not always load, or for that matter, the personal addons page?

    For all of the betas, including Minefield, every so often Firefox features do not seem to load. The Add-ons Manager will stay "blank", despite the columns loading, just nothing inside. And thus I am said when this happens. Any ideas?

    Make sure that you do not run Firefox in (permanent) Private Browsing mode (Never Remember History).
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *Deselect: [ ] "Always use private browsing mode"
    You can check the browser.sessionstore.* prefs on the <b>about:config</b> page and reset user set (bold) browser.sessionstore.*prefs to the default value via the right-click context menu to make sure that Session Restore is enabled and working properly.
    *http://kb.mozillazine.org/Session_Restore
    *http://kb.mozillazine.org/browser.sessionstore.resume_from_crash
    *https://support.mozilla.org/kb/restore-previous-session

  • Firefox 15 does not always load my home page when it starts up.

    Started my computer. Clicked on the Firefox icon to start Firefox. My preferences include loading my home page (an html file on my computer) when Firefox starts. I have also set browser.newtab.url to the same thing.
    Some of the time, a blank page shows where my home page should show.
    My home page should have loaded.
    If I click on "new tab", the new tab always seems to load my home page properly. It is only when I first start up Firefox that this problem may occur.
    Since this is an intermittent problem, and there is a work-around (clicking on the "home" icon), this is undoubtedly a low-priority bug.

    Since the time of Sea Monkey and Netscape, this problem has not arisen for me. It did not happen in Firefox 12. Only when I upgraded to Firefox 15 did this problem start happening. To me, a retired computer programmer, this feels like a regression. I'd guess at either an uninitialized vairable or a race condition.
    In any case, Firefox should be able to handle being closed by clicking on the x in the titlebar. I shall continue doing so.
    There has never been a hang at exit for me, so that is not something I will pursue.
    In addition, since the problem did not occur ever until Firefox 15, I have done the following:
    sudo yum downgrade firefox xulrunner
    Both are now at firefox 12 level.
    To keep things at that level, I've added to /etc/yum.conf the following:
    exclude=firefox, xulrunner
    I'm certain that my recent actions to downgrade will solve the problem and show that this is a regression.

  • Error during inbound delivery creation for some times not always

    Hi,
    I'm getting the following error when i'm trying to create an inbound delivery for PO.
                                                                                    Diagnosis                                                                               
    The system attempted to find the reference movement type for         
         the Warehouse Management system. A corresponding entry is            
         missing in table 156S with the argument 101/X/X/ / /X/.              
         The argument consists of:                                            
         o   IM movement type                                                 
         o   Indicator: Value update                                          
         o   Indicator: Quantity update                                       
         o   Special stock                                                    
         o   Movement indicator                                               
         o   Access indicator                                                 
         o   Indicator: Consumption         
    Can someone help me to resolve it? as it is not happening always
    Appreciates everyone time and help.
    Thanks and regards,
    Siva

    Hi,
    Thanks for the response and yes i did maintained IM/WM mvt types for 101 in both places.
    If the movement type is maintained well why SAP says it is not?
    SPRO > LE > WM > Interfaces > IM > Define Movement Types - "Assign WM Movement Type References to IM Movement Types'
    Related tabel is V_156S_WM
    If you check your configuration you will see that there are many entries with 101, and there are several other parameters...
    First you should check what you are doing in IM, what parameters that mvt has (qty, value update, special stock, etc) > after that you should check whether it is maintained well in WM customizing - see steps in my previous email.
    Regards,
    Csaba

  • Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton?  I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

    I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM.  Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD?  I do NOT want to install OSX Lion or Windows 7 Professional on the external drive.  I do NOT want to boot either system from the external drive.  The 3TB external drive is for backup only.

    Use NTFS for Windows and buy Paragon NTFS for OS X
    You can also try Paragon HFS for Windows
    As long as you are using for data and backups, you can leave the drive as GPT too.
    I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
    And yes you can use Windows to create a partition.
    Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
    MBR has trouble with 3TB drives.

  • PLUG-INS not always loading - - Coupon Printer Manager plugin has crashed

    ''dupe of https://support.mozilla.org/en-US/questions/914197''
    I am running Windows XP SP3 and all updates are current.
    For weeks, running 7.0.1, 8.0.1 or 9.0.1, whenever I try to print coupons at the www.coupons.com website, I have difficulty and consistently I receive the following Firefox ERROR message...
    "The Coupons Inc. Coupon Printer Manager plugin has crashed"
    ...and I always SUBMIT a REPORT to Mozilla.
    This website is suppose to invoke the following plug-ins...
    Coupons Inc., Coupon Printer Manager 4.0.1.3
    Coupons Inc., Coupon Printer Manager 4.0.0.7
    ...and using Task Manager I watch to see if the Image column shows one or two plug-ins appear - of course, I don't know which ones - see below for additional info. Most of the time only one plug-in appears and then the website asks me to INSTALL the software (again). When two plug-ins appear (again, I do not know which), things run okay for the first coupon - however around 50% of the time I am unable to print a second, third, etc, coupon.
    Regarding add-ons, I have the following:
    PLUG-INS
    Coupons Inc., Coupon Printer Manager 4.0.1.3
    Coupons Inc., Coupon Printer Manager 4.0.0.7
    Java Deployment Toolkit 6.0.300.12 6.0.300.12
    Java Platform SE 6 U30 6.0.300.12
    QuickTime Plug-in 7.7 7.7.0.0
    Shockwave Flash 11.1.102.55
    EXTENSIONS
    Adblock Plus 2.0.3
    Free Download Manager plugin 1.5.5
    APPEARANCE
    FOXSCAPE 4.01
    Default 9.0.1 (disabled)
    I have disabled each of these add-ons to see if anything improves, but nothing does. This does not surprise me since I have been running the same ADD-ONS for months and this problem has only started happening over the past few weeks.
    I have uninstalled the Coupon Printer plug-ins, scrubbed my Registry, and then reinstalled them (with FF closed, as well as opened, of course), and that does not help either.
    Sure would like to RESOLVE this FF problem.
    I am wondering if there's a PLUGINS setting that needs tweaking, and on that note, I have tried setting...
    dom.ipc.plugins.java.enabled
    ...to TRUE (where default is false) and that does not help either.
    The following screen shot shows my about:config / plugin details > http://tinypic.com/r/10dv3v7/5
    Hopefully, others have experienced the same problem and found a workaround or fix.
    Thanks,
    CurlySue :o)

    Sorry, a resolution isn't going to easily or come from Mozilla.
    4 out of 5 of those crashes were directly caused by the Coupons, Inc. Coupon Printer DLL = npMozCouponPrinter.dll
    The developer of that plugin is going to have to fix it. Contact the Coupon website to find out how to report a bug with that plugin.
    https://crash-stats.mozilla.com/report/index/b7c6e33f-d12b-481f-aca0-546b12120111 <br />
    https://crash-stats.mozilla.com/report/index/c4077e92-719a-453b-b046-e4b802120217 <br />
    https://crash-stats.mozilla.com/report/index/51be502e-6bfb-4c31-8738-1f5302120217 <br />
    https://crash-stats.mozilla.com/report/index/9cb6ff8d-0acc-4490-bfa8-c48bf2120217
    This report doesn't specifically indite that plugin, but points to a general plugin fault. <br />
    https://crash-stats.mozilla.com/report/index/a855f8e7-964c-49b8-a049-54aba2120217

  • Last image in flash gallery does not always load

    Several times I have had the last image in a flash web gallery not appear. Today, image #41 is seen in the filmstrip, the gallery indicates I should see #41 of 41 images, but that image does not appear in the thumbnail strip to the left and the large image is still #40. I tried switching out the last file, but that doesn't make a difference. I have built much larger galleries with the same default flash template and had everything work. Is this a bug, or am I missing something?
    Thanks,

    I had the same thing happen to me. Image #25/25 refused to load. Once I added another image for a total of 26 all images loaded.
    Weird.

  • Lightroom 2 losing metadata for TIFFs but not jpegs

    I use LR2 and have noticed an apparent glitch on exporting TIFFs. My copyright field ("Clients may use the pictures for...") is cut off halfway (after 128 characters to be exact) when I open the TIFF in PS4 and look at the IPTC data. But simply changing the export to jpeg - the copyright field is intact. The TIFF metadata is fine when viewing in Lightroom.
    I can't find any help on this, I hope someone can advise..?
    Alex

    I agree that the handling of the metadata may at times appear to be inconsistant between LR and PS, and there may or may not be a bug involved. I rarely need anything beyond LR, so an old copy of Elements 8 is the only PS related package I have. Even so, I can confirm that PSE8 will truncate various IPTC datafields down to their specified length during a TIFF round trip to PSE8 and back to LR. I haven't dug into why this is happening, since LR does generate the xmp fields that do capture the longer strings of data (even for the older IPTC fields). Further, this may be different (fixed) with the latest copy of PSE.
    All that said, you may want to re-consider your useage of the Copyright field. I believe it is intended primarily for the name of yourself or your organization, and perhaps a date or copyright character.  For longer instructions on what people can and can not do with your image, then you should use the "Rights Usage Terms" field. This can all be found at www.iptc.org, and downloading the latest standard. If you decide to change your workflow, and need to update your LR catalog by bulk moving data from one IPTC field to another, then consider using a nifty transfer plug-in by John Beardsworth, here.

  • Safari not always loading sites

    been having trouble lately with safari opening sites. it will load without any problems or delays for about 3 or 4 sites, then will stop loading and i have to force quit. It will try to load the page/site, but never gets there. won't even respond to quitting. I end up having to force quit.

    Your problem may not be exactly the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
    In order for us to give your problem our undivided attention in order to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac you are using, what operating system, and what version of the application in question.

  • Safari not always loading pages (especially yahoo mail)

    Inconsistent loading of pages, like Yahoo mail, ESPN. Some days they load, some days they don't, while other sites load fine. As a relatively new Mac user, thought it may have been a Mac issue but after discussing with friend and in-law, who both have Macs and can load very site, all the time, well, I'm not so sure anymore.
    Suggestions? Tips?
    We love our iMac. Used happily by whole family but internet/Safari issue is frustrating. Running Leopard, internet is wireless.
    Thanks in advance for your help.

    Your problem may not be exactly the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
    In order for us to give your problem our undivided attention in order to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac you are using, what operating system, and what version of the application in question.

  • Know what I'd like? I'd like another option for Adobe Flash - not always on, not always off ... ask me if I want something to use flash.

    I go through the news, see interesting articles and open them in another tab and another and another. Throughout the day, I read the articles and slowly close the tabs. I hate having to hit Ctrl-Alt-Del to shut down Adobe Flash because all of those tabs are playing whatever at the same time. I'd like to have the option under Firefox>Tools>Add Ons to select 'Ask me' instead of just Always Activate or Never Activate.
    Want to make your product better? Take this idea and incorporate this option for all of the Add Ons.
    Thanks!
    Using Windows 8, Firefox 24.0 and it's up to date ... according to my About Mozilla Firefox window.

    hello, this is already possible for plugins: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''plugins.click_to_play'''. double-click it and change its value to '''true''' then you can set plugins to "always ask" in the addons manager.

Maybe you are looking for