RMDATIND uploading problem with external material numbers

Hi,
I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials.
I have a problem with uploading materials which have two types of external material numbers.
For example one material number is 1111-333 and then we have 10000000. The problem is that direct input won't create materials with number 1111-333 though it's possible to create them manually. It works fine with material 10000000.
Does anyone know how fix this issue?

Sweth123 wrote:
Hi Guys:
>
> Clicked check box External number assignment without Check., When I am creating a material (mm01) with only numeric characters it is giving me an eror message saying for this material type Numeric characters are not allowed.
>
> i should be able to create a material with external number range and it can be numeric or alpha numeric?
>
>
> Thanks
> Sweth
Hi,
go to the path Define Number Ranges for Each Material Type click on maintain groups & select the materila type & select the mouse on material type & click on maintain after that maintain the number ranges.
for ex: from 300000000 to 399999999 internal no.range
from A to ZZZZZZ external no.range
from this u can able to create a material with external number range and it can be numeric or alpha numeric
Regards
Raj.

Similar Messages

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problems with external context mapping

Hi ,
I am having the following problems with external context mapping from one WD component to another.
Problem description:
In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
After i have created the component for the used component I try to fill values in the source node contextB thru this code:
wdContext.currentContextB.setB(value);
But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
Thanks in advance for your help.
Best regards
Sourav

HI,
Valery : I personally checked by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
wdContext.currentParentNodeElement().setFname("Abhijeet");
wdContext.currentParentNodeElement().setLname("M");
i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
if this doesnt solve your problem, please post the expanded exception.
hope it helps
let me know if you face nay problem
regards

Problem with external punchout in SRM Server 713

Hello,
We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
Our parameters in structure are:
10                     https://xxxxxxxxx                          URL
20 VIEW_ID          NAME                            Fixed value
30 VIEW_PASSWD     XXXXXX               Fixed value
40 USER_ID          SY-UNAME                   SAP field
50 BRANDING      search5                     Fixed value
60 LANGUAGE      ES                           Fixed value
70 COUNTRY      MX                             Fixed value
75 EASYORDER 1                          Fixed value
80 target _top                                  Fixed value
85 ~caller      CTLG                              Fixed value
90 OCI_VERSION     4.0                     Fixed value
91 FILTER                                      Fixed value
92 OPI_VERSION 1.0                     Fixed value
100 HOOK_URL                             return URL
110 returntarget      _top                       Fixed value
we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
Does anyone know what's missing?
Thanks in advance.
Best regards,
José Luis D.

Hello Jason,
Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
Any suggestion?
Thanks in advance, best regards
José Luis D

I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
Preference and other file locations in Lightroom 5

Inventory reports with external material group

Dear Friends,
In my office in material master record material group & external material groups are maintained. I am looking for a inventory report which shall displays the stock available in paricular plant & other report of stock lying at vendor both should display the material group & external material group. Please help.
Thank you
Prashant B

There is no Inventory report with external material group field in SAP so consult Abaper to develop the customized report.

Uploading problem with Ebay and Dreamweaver MX

I am unable to sync websites with Dreamweaver MX 6.01. When I connect to the remote server, it shuts down the program. I have reinstalled the program, but it still does it. Also, when I use Safari, Opera, and Firefox to upload photos on Ebay, the upload process fails completely, and blows me directly into My Ebay, as if I was not on the selling page at all. I have to go to my PC to do the photo uploads. Seems like it may be a related issue, some kind of uploading problem with Rosetta, or something. I am using a Macbook Pro with the 2.0Ghz processor, connected with ethernet cable, and firewall is set to off. Any ideas?

For E-Bay you might try the following:
Type the following command in Terminal (while Safari is NOT running):
defaults write com.apple.Safari IncludeDebugMenu 1
Then launch Safari, and you will be able to use the new Debug menu.
If you ever wish to disable it again, just repeat the command with a "0" instead of a "1".
Under the Debug menu, you'll see the User Agent sub-menu; select Windows MSIE 6.0 from the list and then try connecting to your web site
Dreamweaver you might need to update your version.
To Dreamweaver 8.01
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=f56452a8

Problem with External 2.1 digital speakers

Anybody have any problems with external digital speakers connected to the SPDIF connection? I have a 1215-600XT, and I tried connecting my old DELL Boston Acoustic 2.1 speakers. They worked, but any time a "sound" played, a loud pop would follow the end of the sound track. If its multiuple sounds (i.e. an application that is making numerous alert sounds) I get multiple pops. It even happens at the endf of music tracks. It was so annoying, I stopped using the speakers. before I invest in another set of speakers, want to know I am not wasting my time.
Also, anyway of getting the soundcard to support digital 2.1 or other sound? The set-up screen only shows stereo for external speakers and no way of adding more.
Sincerely
Scott

pmoney,
If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
Jason

Packing instructions - problem with external number range

Hi Gurus:
I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
I appreciate your valuable input
Tamas

For further records:
we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

Packing into suppliers packaging materials with external HU numbers

All,
We have a scenario where we have customer packaging materials that contain a customer barcode. We consider this as an external HU number. During picking through RF, we would like to pack during picking into this customer packaging material. Tcode LM45 seems to offer some kind of logic but will not allow entering any HU number which is not yet known in the system.
Any ideas on this?
thanks,
MZ

Can you tell me how you receive the handling units ?.If you are receiving material from PO then using an idoc then in idoc function module put the logic crete the inbound delivery with external HU number for receipt.
You can use HID dummy delivery type susyem should create the delivery with customer handling unit numbers for receipt.
I think you need to develop custom program which you need to insert HU number ,material qty ,plant and storage location then system will generate packing lable in background to receipt the material.

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Error code 36 (problems with external hard drive)

I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive. I cannot create new folders and when I hit command N I get error code 36. I also cannot move files from one folder to the next. When I try to move them I get the error message: "The operation cannot be completed because a file of that name already exists" and that simply isn't true. None of the files' names exist in the other folder.

Ok, It appears to be the fault of Western Digital. I ejected the hard drive and then plugged it back in and it said that the drive was broken but I could still read the files and it told me to save the files on another disk and reformat. So it was just a coincidence that I upgraded to Yosemite at the same time that my external hard drive broke.

Synching problems with pages and numbers

After an initial problem with synching which was resolved with Yosemite Pages and Numbers have been synching across all my devices for a couple of weeks and now all of a sudden they have stopped again!! They synch across my phones and iPad but not to my macbook pro!! Very very annoying! How do I resolve it?

Found a solution, but it is odd:
On the 2008 Mac Pro, I UNCHECK the boxes beside Pages and Numbers in System Preferences > iCloud > iCloud Drive > Options. Now Pages and Numbers will properly save edited documents to the appropriate folders on iCloud Drive.
Go figure ...
Hope that this helps someone else.
Jon

A problem with a Materialized View

Hi,
I have a ordinary table with a three column compound primary key (COL_Id, COL_ValidFrom, COL_CaseId)
I also have a MV that selects from that table. This one compiles just fine. It looks like this:
CREATE MATERIALIZED VIEW "MV_02"
REFRESH FORCE ON COMMIT
AS SELECT COL_Id, COL_ValidFrom, MAX(COL_CaseId) CaseId FROM TBL_MediaText GROUP BY COL_Id, COL_ValidFrom;
Works fine. Now I'm trying to create a second MV that selects from the first MV. It looks like this:
CREATE MATERIALIZED VIEW "MV_03"
REFRESH FORCE ON COMMIT
AS
SELECT a.COL_Id, a.CaseId, a.COL_ValidFrom, NVL(MIN(b.COL_ValidFrom)-1, TO_DATE('2099-12-31','yyyy-mm-dd')) ValidTo
FROM MV_02 a, MV_02 b
WHERE a.COL_Id=b.COL_Id(+) AND a.COL_ValidFrom < b.COL_ValidFrom(+)
GROUP BY a.COL_Id, a.CaseId, a.COL_ValidFrom;
This one does not parse. (ORA-12054) There seem to be a probelem with the ON COMMIT command. I have searched the web and found some info on the subject. It tells me to create a MV log, wich I have. I've also tried to put count(*) and count(b.COL_validfrom). But it just wont work.
I see a possibilty of yhe problem laying in te fact that I join using two parts of my PK. Also there might be a problem with the fact that i can't create a log for MV_02 WITH PRIMARY KEY. Or maybe you can't have a MV selecting from another MV?
Do anyone know how i should specify my Logs and/or querys in order for this to parse?
I'm using 10.1, and I do have the ON REFRESH COMMIT-privilege.
Thanks!
Message was edited by:
DavidNils

May be you are trying for this....I don't know how helpful is my solution for you.
SQL> CREATE MATERIALIZED VIEW MVE
2 TABLESPACE JAM
3 REFRESH FORCE ON COMMIT
4 AS SELECT D.DEPTNO,D.DNAME, E.ENAME, E.JOB FROM
5 EMP E, DEPT D
6 WHERE D.DEPTNO = E.DEPTNO(+)
7 /
Materialized view created.
SQL> CREATE MATERIALIZED VIEW MVEF
2 TABLESPACE JAM
3 REFRESH FORCE WITH ROWID
4 AS SELECT * FROM MVE;
Materialized view created.Message was edited by:
Jameel

Upload problems with Facebook and Vimeo from Premiere Elements 10

I have created a project in HD and am trying to upload to Vimeo. Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website. Project is "blurry" when viewed. I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect. Can anyone give me the correct presets for Vimeo from Premiere Elements 10. I can view other people's video in HD and they look fine so I don't think it's my computer monitor. I'm sure you will need more information about my project so please give me a list of specific things you need to know. Thank you.
My Facebook problem is as follows. If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected. Problem is, I would like to upload to my business page. Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page. Does anyone know the values of the preset so I can upload the video to my business page. My business is event and wedding videography so I would like the posts to be as clear as possible.
If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook. Thank you.

VDRAVES
I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
Please see
Share/Computer/AVCHD with Presets = Vimeo HD
Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
In all cases, watch for file size versus bitrate versus quality of end product.
Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
Please review and let us know the outcome.
Thank you.
ATR

RMDATIND uploading problem with external material numbers

Similar Messages

Maybe you are looking for