RME 4.0.3 (Supported devices)

Hello!
I have installed LMS 3.2 with RME 4.0.3.
Apparently from the document
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html#3.2table
RME 4.0.3 does not support Cisco Cat6500, Routers 3800, which we have in our network.
So my question is: how to solve this problem?

If I'm not mistaken, those tables show newly added support of devices & modules, so cat6500 and 3800 support have been around a lot longer than since RME 4.3. You just have to make sure you update your Device Support packages for those two platforms at Common Services > Software Center > Device Updates.

Similar Messages

Why is 6790 not in the list of supported devices ?

My Nokia 6790 came with Ovi Maps installed, however when I try to upgrade I am asked to select the model from a list, and the 6790 is not listed.
Why is 6790 not currently in the list of supported devices ?

@alanbarneys -jj was just quoting a previous post. His posts are always like that. Even I at times have trouble reading them.
Anyway, to answer the question regarding free maps to the 6790. This is a special case since AFAIK the 6790 Surge is a special edition phone available only through AT&T. Such special edition phones often do get software later. However, Nokia did promise to get newer phones availability to the Free Maps service this month.
Please note that for certain models (the N86 in particular) are rumored to have a scheduled update for this month to make it compatible with maps. All you can do now is to wait and see if the 6790 is going to be one of the units with the upcoming update.
Please note that currently, the only devices supported are those with the s60v5 operating system (touch screen) and non touch screen phones with s60v3FP2 operating system with 600mhz processors.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Zen Vision M (60GB) and supported devices (USB Host Featu

I would know if Canon Powershot A520 is a supported device by USB Host Feature.
thanks
mat

rileylarson wrote:
yeah. i am trying to wait for it to come in. where do you li've.
I li've in the Northeast US.... I hope it's available soon!

LMS 3.2.1 with WS-C4500X-16 (Supported Device)?

Hi,
is the device WS-C4500X-16 Supported in LMS 3.2.1?
i tried to serch it in the Supported Device Table for LMS 3.2, but i didnt found the exact module (4500x).
here are the link for the:
Supported Device Table for LMS 3.2
thanks
dawit

Hi Dawit
Do you have device available with you? If yes then it will be better if you can check sysObjectID (1.3.6.1.2.1.1.2)
of device and then check in supported device table.
It always good to check device support with sysObjectID for accuracy.
Thanks
Mahavir

What are supported device attributes on iOS during enrollment phase?

I'm installing configuration profile using over-the-air (OTA) enrollment. What are supported device attributes on iOS during first phase payload? I'm sending sth like:
<plist version="1.0">
    <dict>
        <key>PayloadContent</key>
        <dict>
            <key>Challenge</key>
            <string>challenge</string>
            <key>DeviceAttributes</key>
            <array>
                <string>UDID</string>
                <string>DEVICE_NAME</string>
                <string>VERSION</string>
                <string>PRODUCT</string>
                <string>MAC_ADDRESS_EN0</string>
                <string>IMEI</string>
                <string>ICCID</string>
            </array>
            <key>URL</key>
            <string>https://my-profile-server</string>
        </dict>
        <key>PayloadDescription</key>
        <string>Enter device into the encrypted profile service</string>
        <key>PayloadDisplayName</key>
        <string>Profile Service</string>
        <key>PayloadIdentifier</key>
        <string>com.xxx.mobileconfig.profile-service</string>
        <key>PayloadOrganization</key>
        <string>XXX</string>
        <key>PayloadType</key>
        <string>Profile Service</string>
        <key>PayloadUUID</key>
        <string>1a21d4dd-6723-45c5-a184-c3fe0075db14</string>
        <key>PayloadVersion</key>
        <integer>1</integer>
    </dict>
</plist>
Is there any more attribute that I can get from the device in this payload? For example serial number? Is there any official list of possible attributes? Any help would be much appreciated. Thanks.

May be here: http://www.apple.com/support/ios/keynote/

HT4759 I sent Cloude maseeg for my phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt with me

I sent Cloude maseeg for my phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt
<Edited By Host>

Not what you want to hear, I know, but this is a user to user forum. No one here has the power to help you.
You can get information about an order you placed on the Apple Online Store through the Order Status page. If you prefer, you can also get order status or make changes by phone at 1-800-692-7753.
You can try calling again and if the person you speak to can't help, ask to speak to a supervisor.

TS3988 I sent Cloude maseeg for my phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt with me and I Mobinil SIM and number, 01281081731

I sent Cloude maseeg for any phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt with me and I Mobinil SIM and number, 01281081731

Try this here:
http://docs.info.apple.com/article.html?artnum=93499
"Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear"
And since you are teh savvy about these sort of things, here's Microsofts support article for the drive issue:
http://support.microsoft.com/default.aspx?scid=kb;en-us;297694
"New drive or mapped network drive not available in Windows Explorer"
Good luck

I am unable to add my iPad to my support device list.

Hi All
Hopefully someone can help me as Apple so far have been next to useless.
A few months ago I took my iPad 3 to the Apple store to get it swapped out as the home button was not responding as it should be.
I took the swap away and a few days ago logged into my Apple Support Devices page and it lists my iphone but not my iPad. I went to add it by putting in the serial number and got presented with
According to our records, this serial number is registered to another Apple
ID. If you have more than one Apple ID, log in to My Support Profile with
that Apple ID to see your other registered products.
I then emailed Apple who told me they had un-associated it from any Apple ID and i should now be able to add it..
It tried...and I couldn't..
I then emailed them back telling them that and they have told me to ring up and pay a Fee..
All I want to do is get the device registered to myself!!
Any help would be great..
Thanks
Jon

call apple support
http://support.apple.com/kb/HE57

TS5376 Unistalling Appl Mobile Support Device

I've had to unistall iTunes due to an error message I was receiving regarding an updated and can't uninstall the Apple Mobile Support Device. The error message coming up now while trying to unnstall this programme is 'verifiy you have sufficient privileges to start system services'. I've tried to repair it and get the same message. I now can't re-install the iTunes until this has been removed. Any advise would be gratefully received.

See Troubleshooting issues with iTunes for Windows updates.
tt2

ADE doesn't seem to recognize my Google Nexus (2013) tablet. Is it not a supported device?

ADE doesn't seem to recognize my Google Nexus (2013) tablet. Is it not a supported device?

ADE doesn't seem to recognize my Google Nexus (2013) tablet. Is it not a supported device?

Message "ipad does not support device" when watching netflix and bbc iplayer on my tv through the I pad with a 5 in one connection kit

Until recently, I was able to watch amazon prime, netflix and iplayer on my tv through the I pad with a 5 in one connection kit. Now it says I pad does not support device. can anyone help? should i turn of mirroring? thanks

Otherwise, simply click through that window. If I tunes did not start up automatically, simply start it now.

Jabber supported devices

I don't see the Samsung Tab2's or Tab4's on the list of supported devices. Are they supported? if so, is there an updated list for me to view?

The RNs contain the list of tested and supported devices, anything not listed, *might* work if you meet the necessary specs.

Is Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

Is the Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

happyherbert
I cannot give any guarantee as to whether you can make a USB connection between camcorder and computer/Premiere Elements 10 Get Media/"Flip, AVCHD, Cameras, Phones or Removal Drive"/Video Importer but it might work.
But worst case, which is not so bad, is transferring the AVCHD files to the computer hard drive and then importing the files into a Premiere Elements 10 project with the program's Get Media/Files and Folders.
If you have Full 1080i30, then the project preset that you would set before you import the files would be
NTSC
AVCHD
Full HD 1080i30
We can discuss more about settings when you have more details.
You are at a disadvantage with Premiere Elements 10 on Windows Vista (32 or 64 bit). In that arrangement, Premiere Elements 10 is a 32 bit application with the limitations of 32 bit system. AVCHD is a rather resource demanding format. If Premiere Elements 10 were on specifically Windows 7, 8, or 8.1 64 bit, then it would be a 64 bit application that could take advantage of the 64 bit resources. All that would translate into getting a larger project taken to successful completion with a greater frequency.
Please review and then we can go further into the details and then decide what next.
Thanks.
ATR

PrE 9 Supported Devices

Thanks to an astute forum member, the link to this Adobe KB Article is now provided, to list the Supported Devices for PrE 9. Note: any devices that were released after Adobe did its certification program for PrE 9, will not be shown, but many will most likely work fine.
Hope that others find this KB Article useful.
Hunt

For Windows (not sure about Mac) This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section,
the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Cisco PI 2.0 supported devices

hi all,
I need to install cisco PI 2.0 and I have Cisco switches 2950 in my network. do this model is supported on Cisco PI2.0 or not?
i searched on the supported devices excel sheet but I did not get any result
please advice.

Check the Attached Excel file for PI 2.0 Compatibility, check the Detailed Device support matrix tab you will find. it is supported.

RME 4.0.3 (Supported devices)

Similar Messages

Maybe you are looking for