RME 4.2 Inventory with no SNMP for FWSM

Looking at trying to get Config Archives setup for FWSM and ACE modules however we have SNMP
restricted in this portion of the network.
I understand that inventory polling must be present to get the devices into RME - is there a way we can get around not having SNMP for this inventory - a manual method maybe or some loophole we can work around?
Also will syslog work from these devices to RME?

To get the config archives, you simply need the telnet or SSH credentials in the DCR. Not having SNMP access will restrict RME from gathering device information for inventory collection and the device type will show up as "?" in the DCR.  Syslog is used to trigger a sync archive if changes occurred but you will need to define the syslog server settings on the FWSM.

Similar Messages

  • Update book inventory with NEW company code assignment for the same site

    Hi gurus ,
    Our company have this business scenario:
    the site has run in Company Code A for several month with business of Material Management  function, then the site have to be changed to Company Code B for financial requirement .
    What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or  sales document clearance , is there any way we can update the book inventory  with new profit center corresponding to the CC B ?
    Thanks in advance ,
    Ryan

    Actually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18  for new CC assignment .
    All other questions are  under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this?

  • Prime Infrastructure 2.0: Running an inventory sync removes "snmp-server location" in running-config

    Hello,
    we're running Prime Infrastructure 2.0 (version VA-2.0.0.0.294).
    I was scared as I figured out one hour ago that running an inventory sync (Device Work Center) removes the command snmp-server location and adds the command snmp-server host "PI-ip address" "snmp rw community" in the running-config.
    Has someone the same behaviour or can reenact this scenario?!
    Can someone imagine that this behaviour has something to do with a configuration setting in PI?
    I'm perplexed and got gray hair now.
    Thank you for your answers or tips.
    Bastian

    Hello Rob,
    I just successfully installed the patch. The snmp-server location is not touched anymore while running a inventory job.
    But PI still enters this string in the running-configuration:
    snmp-server host "PI-IP address" " our snmp RW community- string"
    although there already exists the entry:
    snmp-server host "PI-IP address" version 2c "community-string (not the snmp rw-community-string)"
    Do you or anyone else has the same behaviour that PI adds automaically himself as snmp trap receiver with the SNMP-RW community?
    Regards
    Bastian

  • Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

    Hi, We have a Scenario as below:
    Question1:
    We have a multiprovider contains 4 infocubes and 2 Master Data objects
    a.Demand
    b.Inventory
    c.Sales Orders
    d.In Transit
    Master Data objects
    a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
    b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
    At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
    We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
    Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
    In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
    We have another report which is the Inventory Report with the following details:
    Material, Location, MRP Controllder, Calday, Base UOM,      Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
    Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
    Question2:
    When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
    Regards
    Vijay

    Hi,
    I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
    Regards
    Prasad

  • BAPI_ACC_DOCUMENT_POST with TAX posting for FB60 t-code

    Hi Experts,
    I am trying upload the data using BAPI_ACC_DOCUMENT_POST with Tax(ACCOUNTTAX) for the FB60 t-code. But not getting right.
    Any help on this issue greatly appreciated.
    Thanks & Regards,
    Harish

    Hi,
    Check out this-
    FU BAPI_ACC_DOCUMENT_POST
    Short Text
    Accounting: Posting
    Functionality
    Using this method you can create a posing in accounting for certain business transactions.
    Possible ( Business Transactions):
    Postings that generally only affect the general ledger. (RFBU)
    Billing: For billing in Sales and Distribution, accounting is supplied with the relevant billing data. (SD00) Billing Document
    Accounting can use the data of a logistics system that result from an Invoice Receipt. (RMRP)
    Goods Movement are triggered by transactions in Sales and Distribution or by inventory postings. Within logistics, they lead to a change in the warehouse stocks of <DS:GLOS.Inventory Management>Inventory Management. This results in a posting in accounting. This is why accounting is supplied with the relevant data from logistics. (RMWA)
    Example
    Billing document:
    By selling goods in accordance with targets, revenue is generated. The revenue is posted in billing and forwarded to accounting.
    Invoice receipt:
    Raw materials are purchased in accordance with targets. The invoice receipt is posted in a logistics system. The data from the raw materials is forwarded to accounting.
    Goods Movment:
    The use of raw materials leads to a change in stock in inventory managment. The posting of raw material consumption is forwarded to accounting.
    G/L Account Posting:
    Provision posting for an expected warranty service. This can refer to acquisitions or retirements belonging to stocks that are not in subledger accounting relevant to inventory management. This is particularly the case if such materials are not displayed as vendor/customer, materials, loans etc. or cannot be displayed in this way. This can also refer to write-ups or depreciation that contain higher aggregations of values than are maintained in a corresponding subledger that is relevant to inventory management.
    The conversion of foreign currencies for receivables/payables due to large exchange rate changes that should not lead to an update of the accounts payable or accounts receivable accounting. A similar transaction can arise for the revaluation of raw materials if this revaluation takes place at a correspondingly aggreagated level.
    Reclassification of inventory of P&L statement accounts that are only used for reconcilliation purposes in the general ledger (this rearranges values for balance sheet items).
    Balance reclassifications of stocks to receivables with different return times.
    Notes
    If the parameter CurrencyAmount is filled with the currency fields, a complete document check including characteristics and value components of profitability analysis (CO-PA). Otherwise, the account assignment objects are checked.
    Messages are returned in the parameter Return. In the parameter documentation you can find the return values and their meaning.
    Further information
    You can find further information in the SAP Library under "Financials -> Accounting - General (AC) -> Interfaces to Accounting (AC)".
    Parameters
    DOCUMENTHEADER
    CUSTOMERCPD
    CONTRACTHEADER
    OBJ_TYPE
    OBJ_KEY
    OBJ_SYS
    ACCOUNTGL
    ACCOUNTRECEIVABLE
    ACCOUNTPAYABLE
    ACCOUNTTAX
    CURRENCYAMOUNT
    CRITERIA
    VALUEFIELD
    EXTENSION1
    RETURN
    PAYMENTCARD
    CONTRACTITEM
    EXTENSION2
    REALESTATE
    ACCOUNTWT
    Reward if useful!

  • Physical Inventory with serial numbers

    Hi friends,
    we are trying to post physical inventory with materials having serial numbers.
    However during post the system gives 2 errors.
    1)
    Stock data of serial number 2 not suitable for movement
    Message no. IO231
    "The current stock information for the serial number 2 contradicts the stock information of the movement to be posted... "
    2)
    Serial number 2 cannot be used here
    Message no. IO201
    "You have entered a serial number already present in the system..."
    Let me try to explain the situation.
    For example we have two storage locations.
    A material, say SERIAL, have some stocks in one storage location, say 0001, with serial numbers.
    Assume that in the system serial number 2 of the material SERIAL is in the storage location 0001.
    However, when physically counted, this serial number 2 shows up in the storage location 0002.
    Therefore we would like to enter count for the storage location 0002 to post the serial number 2.
    Doing so, we get the errors above.
    Is there any solution to that problem? Thanks in advance.
    Best regards,
    Yusuf

    Thank you Lakshman,
    yes the stock transfer between storage locations or removal first from storage location 0001 with pyhsical inverntory can be done in the system. However I wonder is there any better way to do this, without making any abap development.
    I would like to make a count for the storage location 0002 as in our case (or this can be a customer consigment either in another case). Here I expect the serial number 2 will be removed from storage location 0001 and will be placed in sorage location 0002 at the same time. Do you know any way of doing this?
    Best regards,
    Yusuf

  • Inventory with sccm 2007

    Hello,
    i have to make inventory with SCCM 2007.My boss asked me to collect important information (from hardwares and softwares) for both .The problem is that he didn't specify me whcih informations to collect.He just told me to do it seems like  i'm
    the  the workstation infrastructure manager and asked myself which crucial informations i have to collect.For information,we have both laptops and desktops in our infrastructure.And we have two types of OS for our workstation:Windows XP and windows 7.
    I really need help to know which crucial information do i have to collect.
    Thank you in advance yor all your propositions.

    You can refer this link for inventory : http://technet.microsoft.com/en-us/library/bb693889.aspx
    Later you can decide on the type of inventory.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • SNMP FOR ORACLE 10G?

    Hi all!
    i am trying to configure snmp with oracle 10g so that i can monitor oracle from some network management system like tivoli, spectrum etc.
    i checked in my $ORACLE_HOME/network , but there is no snmp directory ...nor does it have peer. Do i need to run some script to create the snmp directories or there is another path for the
    CONFIG.master
    CONFIG.encap
    start_peer
    files??? Please let me know if someone has configured that???
    Also, how do you test whether the agent is running on the server or not??

    Hi,
    I'm trying to configure snmp for oracle 10g on Linux using OEM agents.
    I followed all the steps mentioned in:
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16244/chap2.htm#CHDCCEFB
    I'm nto getting any output when I did snmp walk using below command:
    snmpwalk -t 30 -M /usr/share/snmp/mibs/ -m all -c public localhost rdbmsMIB
    When I did snmpwalk using below command:
    snmpwalk -t 30 -M /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc -m all -c public localhost rdbmsMIB (only difference here with the above command is mibs directory)
    output:
    Cannot find module (CHARACTER-MIB): At line 7 in /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc/database.v1
    Unlinked OID in RDBMS-MIB: rdbmsMIB ::= { mib-2 39 }
    Cannot adopt OID in RDBMS-MIB: rdbmsWellKnownLimitedResources ::= { rdbmsObjects 10 }
    Cannot adopt OID in RDBMS-MIB: rdbmsRelTable ::= { rdbmsObjects 9 }
    Here I'm trying to monitor Oracle statistics through zenoss console. As an initial est i'm trying to configure the snmp for oracle 10g. Please provide me the complete list of steps on what to do after installing OEM for my requierment.
    This will be a great help to me..
    You can also mail me at [email protected]
    Thanks,
    Ranjeet

  • Configure SNMP for send trap in OEM 11g

    Hi,
    We have OEM 11g in our environment. We have to configure SNMP for send trap to third party application in OEM.
    Our platform is Oracle Enterprise Linux 5.4 . We have installes SNMP in Platform . As mention in document (http://download.oracle.com/docs/cd/E11857_01/em.111/e14091/chap2.htm#CHDFDJJI) we configure MASTER.configer file. Then we started the SNMP agent by root user through command ./start_peer -a.
    We configure SNMP rule in OEM and then assigned this rules to method.
    But we are not able to send traps to third party application(IT360).
    I am not able to integrate OEM 11g with IT360.
    please suggest me, where i am going wrong in this configration? or i have to do some more configration?
    Thanks in advance
    Vikash

    The SNMP reference manual has been removed from the 10g and 11g doc set.
    You could consult the manual in the 9i doc set and check whether the files for your unmentioned platform still get delivered.
    Sybrand Bakker
    Senior Oracle DBA

  • Configure SNMP for Sending TRAP

    Hi,
    I have never work on SNMP and i need your help to configure the same.
    We want to configure SNMP for sending trap related to database start and shutdown.But we don't want to use OEM Grid because it require license. So is there any way to configure the same without OEM.
    Please help me with the document or link.
    I got the reference guide to configure SNMP using OEM but i won't help me as OEM require license.
    Thank You.
    Regards,
    Chirag

    The SNMP reference manual has been removed from the 10g and 11g doc set.
    You could consult the manual in the 9i doc set and check whether the files for your unmentioned platform still get delivered.
    Sybrand Bakker
    Senior Oracle DBA

  • Snmp for 3750 switch stack

    Hi,
    I have two 3750 switch stack together with one ip address mange the stack.
    Can I monitor the memory and cpu for each individual switch? what is the oid then?
    Thanks.
    C.K.

    Hello CK,
    On the Catalyst 3750, the stack master handles the SNMP requests and traps for the whole switch stack.
    The stack master transparently manages any requests or traps that are related to all stack members. When a new stack master is elected, the new master continues to handle SNMP requests and traps as configured on the previous stack master, assuming that IP connectivity to the SNMP management stations is still in place after the new master has taken control.
    So to answer your question, with the OID for CPU and Mempory usage the switch will return only values for the active master. The other stack members are hot standby and do not produce SNMP information for CPU and/or Memory.
    HTH
    --Leon

  • Help with manifest.txt for .jar

    I have two class files I'm trying to create a .jar file for:
    InventoryMain.class (houses my main)
    Inventory.class
    Both files are in package inventorymain
    Here is everything I have tried in my manifest.txt file:
    Manifest-Version: 1.0
    Main-Class: inventorymain.InventoryMain (1st try)
    Main-Class: InventoryMain (2nd try)
    Main-Class: inventorymain (third try)
    I use the following in command prompt:
    jar cvfm Inventory.jar manifest.txt *.class (this runs and says all 3 files are included)
    then when I try to run Inventory.jar I get the following error:
    A window pops up labeled Java Virtual Machine Launcher with the error of "could not find the main class. Program will exit.
    Anyone know what I am doing wrong? I am a student, and this is the first program I have created that uses more than one file. I have been all over the Internet to look for things I can do. I am stumped!! Anyhelp would be appreciated. Here is the beginning of my main program, if it will help someone help me.
    package inventorymain;
    import java.io.IOException;
    import java.io.InputStreamReader;
    import java.io.BufferedReader;
    public class InventoryMain
        // Creates a new instance of InventoryMain
        public InventoryMain()
        // main method begins execution of java application
        public static void main(String[] args)
        {

    Here is both of my .java files
    package inventorymain;
    import java.io.IOException;
    import java.io.InputStreamReader;
    import java.io.BufferedReader;
    public class InventoryMain
        // Creates a new instance of InventoryMain
        public InventoryMain()
        // main method begins execution of java application
        public static void main(String[] args)
           //create inventory of pens
           Inventory pens = new Inventory(); //creating the inventory with empty constructor
                pens.setItemNum( 1 );
                pens.setName( "pens" );
                pens.setPrice( 1.59 );
                pens.setUnits( 346 );
           //create inventory of pencils    
           Inventory pencils = new Inventory(); //creating the inventory with empty constructor
                pencils.setItemNum( 2 );
                pencils.setName( "pencils" );
                pencils.setPrice( .59 );
                pencils.setUnits( 487 );
           //create inventory of markers   
           Inventory markers = new Inventory(); //creating the inventory with empty constructor
                markers.setItemNum( 3 );
                markers.setName( "markers" );
                markers.setPrice( 1.29 );
                markers.setUnits( 168 );
           //create inventory of paperclips
           Inventory paperclips = new Inventory(); //creating the inventory with empty constructor
                paperclips.setItemNum( 4 );
                paperclips.setName( "paperclips" );
                paperclips.setPrice( 1.19 );
                paperclips.setUnits( 136 );
           //create inventory of glue                
           Inventory glue = new Inventory(); //creating the inventory with empty constructor
                glue.setItemNum( 5 );
                glue.setName( "glue" );
                glue.setPrice( .79 );
                glue.setUnits( 72 );
           //create inventory of tape    
           Inventory tape = new Inventory(); //creating the inventory with empty constructor
                tape.setItemNum( 6 );
                tape.setName( "tape" );
                tape.setPrice( .49 );
                tape.setUnits( 127 );
           //create inventory of paper    
           Inventory paper = new Inventory(); //creating the inventory with empty constructor
                paper.setItemNum( 7 );
                paper.setName( "paper" );
                paper.setPrice( 1.79 );
                paper.setUnits( 203 );
           //Display the inventories
           pens.showInventory();
                System.out.println(); //enters blank line
                System.out.println(); //enters blank line
           pencils.showInventory();
                System.out.println(); //enters blank line
                System.out.println(); //enters blank line
           markers.showInventory();
                System.out.println(); //enters blank line
                System.out.println(); //enters blank line
           paperclips.showInventory();
                System.out.println(); //enters blank line
                System.out.println(); //enters blank line
           glue.showInventory();
                System.out.println(); //enters blank line
                System.out.println(); //enters blank line
           tape.showInventory();
                System.out.println(); //enters blank line
                System.out.println(); //enters blank line
           paper.showInventory();
        }//end Main 
    }//end class InventoryMain___________________________________________________
    package inventorymain;
    public class Inventory
            private int itemNum;
            private String name = new String();
            private int units;
            private double price;
    //    All getters and setters
       public int getItemNum()
            return itemNum;
       public void setItemNum(int itemNum)
            this.itemNum = itemNum;
       public String getName()
            return name;
       public void setName(String name)
            this.name = name;
       public int getUnits()
            return units;
       public void setUnits(int units)
            this.units = units;
       public double getPrice()
            return price;
       public void setPrice(double price)
            this.price = price;
    //   Constructors
       Inventory() // Empty Constructor
        //Constructor that takes arguments
       Inventory(int _itemNum, String _name, int _units, double _price)//Constructor
             itemNum = _itemNum;
             name = _name;
             units = _units;
             price = _price;
        //Computes value of inventory
       public double valueOfInventory()
            return price * units;
        //displays the details of the inventory
       public void showInventory()
            System.out.println("Product Name   : "+name);
            System.out.println("Item Number    : "+itemNum);
            System.out.println("Number of Units: "+units);
            System.out.println("Unit Price     : $"+price);
            //call the valueOfInventory() method and display the value
            System.out.println("The value of " +name+  " left in the inventory is: $"+valueOfInventory());
    }// end class Inventory
       

  • I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

Maybe you are looking for