RME 4.3.0 unable to import IOS from network

Question

Hi,
i tried to import a IOS from a network device into the software repository but the job fails with the following line in the log:
sw-10-ed24#
sw-10-ed24#dir /all flash:
Directory of flash:/
    2  -rwx     3755882  Mar 01 1993 02:29:05 +01:00  c2940-i6k2l2q4-mz.121-22.EA10a.bin
    3  -rwx        1048  Jun 29 2011 00:50:48 +02:00  multiple-fs
    4  -rwx        4416  Jul 26 2011 11:23:18 +02:00  vlan.dat
    5  -rwx         271  Mar 01 1993 01:26:09 +01:00  info
    6  -rwx        5520  Jun 29 2011 00:50:47 +02:00  config.text
  405  -rwx         271  Mar 01 1993 01:28:34 +01:00  info.ver
    7  -rwx        1955  Jun 29 2011 00:50:48 +02:00  private-config.text
7612416 bytes total (3840512 bytes free)
sw-10-ed24#
sw-10-ed24#disable 0
sw-10-ed24>
sw-10-ed24>
sw-10-ed24>_tune_                 
sw-10-ed24>
sw-10-ed24>
The chosen protocol ist SCP and the option "Use SSH for software image upgrade
and software image import through CLI(with fallback to TELNET)." is enabled.
Any help us much appreciated. Thank you.

Answer 1

Here are a few initial setup details to use SCP
SCP (Secure Copy Protocol) Issues
Be aware of the prerequisites necessary for SCP to work well in       RME:
Ensure that you have enabled SSH on the device and have the             credentials available in DCR.
The SCP server should be enabled on the             device.
Note that SWIM acts as an SCP client (different from other             protocols).
For configuring SCP on CiscoWorks
Enabling scp
To enable the configuration archive to gather the configurations using the scp protocol, modify your device configurations.
To configure local User name:
aaa new-model
aaa authentication login default local
aaa authentication enable default none
aaa authorization exec default local
username admin privilege 15 password 0 system
ip ssh authentication-retries 4
ip scp server enable
To configure TACACS User name:
aaa new-model
aaa authentication login default group tacacs+
aaa authentication enable default none
aaa authorization exec default group tacacs+
ip ssh authentication-retries 4
ip scp server enable
User on the TACACS Server should be configured with priv level 15:
user = admin {
default service = permit
login = cleartext "system"
service = exec {
priv-lvl = 15