RME 4.3.1 - No inventory collection of some 65xx devices

Hi all,
my problem is, that LMS3.2 with RME 4.3.1 does not make an inventory of some 65xx devices. What I've tried so far to correct this problem:
# read the other incidents regarding this problem
# increased the RME device attribute "SNMP timeout" from 2s to 10s -> no success
# increased SNMP timeout for one device (192.168.90.7) from 10 to 20s and the retries from 2 to 3 -> no success
What I've observed:
# no credential problem (I can backup the configs)
# no SNMP problem (I can snmpwalk through the device)
# Inventory collection takes always only app. 10s until the above error unless I've increased SNMP timeout and retries
# IC_Server.log generates always following error:
[ Tue Dec 15  12:22:59 CET 2009 ],ERROR,[Thread-21],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,729,Exception for device 192.168.90.7 is
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:719)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NumberFormatException: EPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Seems if RME has a problem with this special IOS version.
Enclosed you will find the complete IC_Server.log and the screenshot from the inventory collection of 192.168.90.7.
Thank you in advance for help.
Kind regards
Alfred Brunner

This is CSCtb16925.  A patch is available from TAC to correct the problem.

Similar Messages

  • LMS 3.0.1, RME 4.1.1 - Inventory Collection Status displays too many device

    Running LMS 3.0.1 with RME 4.1.1 on a Windows box. On the Inventory Collection Status screen I see the following:
    Inventory Collection Status No. of Devices
    Inventory Collected: 1246
    Inventory Never Collected: 0
    Inventory Recently Failed: 34
    Total 1246
    The problem with this is that I only have 668 devices. Is this just a cosmetic issue?

    Assuming you're not integrated with ACS, then yes.  If integrated with ACS, some of the devices may not be authorized.  You will need to check your ACS configuration to make sure all devices in LMS are known to ACS and that your user (and the System Identity User) is authorized to manage them.

  • RME 4 - Inventory Collection Failure

    I am getting the following RME inventory collection error on 4 devices.  These 4 devices were recently added to the network and were all attached to a new radius server.  I have tested AAA to the 4 switches and am confident that radius is working as intended.
    The devices are a mix of 2950 and 3550 switches.
    Here is the error.
    RICS0001:Internal Error,unable to process the collected data from the device.
    Thanks in advance.

    In that case, this is probably CSCsk65355 which should be fixed in 4.1.1.  However, 4.1.1 suffers from CSCsm97530.  So I would suggest to first upgrade to RME 4.1.1.  If you continue to see this, then you can contact TAC and apply patch for CSCsm97530 over 4.1.1.

  • Inventory Collection Failure with LMS 3.2

    Hi,
    I've been running LMS 3.2 with RME 4.3.1.
    Inventory Collection fails while trying to collect data from 7825I Media Convergence Servers running Call Manager 6.1.
    It fails with the following error:
    RICS0001:Internal Error,unable to process the collected data from the device.
    I have tried deleting and adding the device again, but with no effect.
    The Call Manager server has ip 192.168.5.5, here it is the IC_Server.log attached.
    Looking at the log, I see there is some kind of database error, but I don't know how can be avoided.
    Any suggestions?
    Regards,
    Velin

    I have removed the Call Managers from RME, and then re-added them again.
    After that I started a inventory collection job but it failed again with the same error. I've tried some times with the inventory job but it fials every time.
    I read about the bug you've mentioned and it is advised to patch the RME. Since i'm running the latest version, what can i do?

  • RME 4.3, Inventory Collection doesn't work for 6500

    I have a issue with Inventory collection for 6500 devices running IOS 12.2.33 SXI1, fails with a message, "device collection failed"
    From IC_Server log i could see SNMP Request timeout exception, so increased SNMP timeout to 10  under device attributes for the device but still it fails.
    attacehd is the extract from IC_Server log.
    Could anybody help me on this? Thanks

    You have not increased the timeout properly.  You need to go to RME > Devices > Device Management > RME Devices, and edit the attributes for the required device.  Select the device from the list in the left-hand pane to pre-populate the current attributes.  Then increase the SNMP timeout to 10, and save the changes.  On the previous screen, you will need to APPLY those changes before the 10 second timeout will take effect.

  • RME 3.2 Inventory Collection Failure with error

    Hi,
    Inventory collection fails with error is "Timed out. Make sure that ICServer is running”. But the ICServer process is running. I enabled debug on could see the following in the IC_Server.log which I'm not sure if it indicates any issues.
    I can find the devices in DCR and the devices are classified as Normal in RME.
    Series of following message for all the devices
    DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.Request,115,Removing device 181from request 1255347128972
    DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,163,Removing, 175
    DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,171,got device, 175
    DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.Device,51,Removing request 1255347128972 for device 175
    DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,177,Removed2 dev, 175from Priority of the ENUM is : 0
    then,
    DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,89,Adding Device :175
    DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.Device,46,Adding request 1255347128973 for device 175
    DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,142,Found dup device in queue: 175
    DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.Request,75,Adding device 175 to request 1255347128973
    and then the below messages
    DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called.
    DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called.
    DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called
    I highly appreciate any help on this. Thanks

    The ICServer process could have locked up which means a full thread dump will be required to see why this is happening. Open a TAC service request, and they can walk you through getting this.

  • Inventory Collection problem for RME 4.3.1 LMS 3.2

    I recently upgraded from LMS 3.1 to LMS 3.2 and RME v 4.3.1. I have problems with the inventory collection. It will start scanning, but stops after approximately 10 devices. The rest of them will have a pending state. If I stop the collection job and start it again none (0) devices will be scanned. If I restart the ICServer it will result in the first option. That is, it will scan only 10 devices and then stop. I have extended the SNMP timeout to 30 secs and zero retries. Any suggestion would be appreciated

    I have read through the dump and cant find anything in particular. Another discovery I've made is that the SNMP walk of an unsuccessful device takes 10 times longer than a successful device. An inventory job on a unsuccessful device only goes into pending and the job never starts.

  • LMS 3.2 - RME 4.3.1 Inventory Collection never stops (Job Result = pending)

    Hello all,
    with our LMS-System running on Solaris 10 we have the following problem:
    - Inventory Collection never stops after starting
    - This can be seen with all devices or 1 device selected
    - Config-Mgmt is working
    - After re-init of RME-DB the problem persists
    In Logfile (IC_Server.log) no problems are shown.
    In Job-Logfile only the collection request is shown.
    Any help is appreciated
    Thanks for your feedback
    Lothar

    Hi Joe,
    with further troubleshooting this problem I discoverd the following.
    - Having problems with inventoring certain Cat4000 we requested patch for Bug-ID CSCtb16925 (LibInventory.zip-File).
    - Replacing this file with the old one or installing the newest IDU for RME the problem was solved.
    It seems that the LibInventory.zip file given with Bug-ID CSCtb16925 is somewhat buggy (maybe in context with device-number) greater
    than 1000.
    Thanks for your support.
    Lothar

  • LMS 3.2 RME 4.3.1 Inventory collection failing for switches

    I have 6 switches that inventory is failing for.  They do run the 12.2(33)SXI3 software but I have the CSCtb16925-1.0  patch installed.  I've tried to increase the SNMP timeout for the devices but they still fail.
    Ideas?
    Chris Jasztrab

    You did not properly increase the SNMP timeout.  Go to RME > Devices > Device Management > RME Devices, and edit the attributes of the device in question.  Perform an inline edit.  Click on the device name, then change the existing SNMP timeout value to 10.  Then save your changes, and apply them on the previous screen.  Then inventory collection should work.

  • RME 4.3.1 Inventory collection failing for cisco 3925

    Hi,
    I've a customer having LMS 3.2 and RME 4.3.1. He has 14 Cisco 3925 routers out of which inventory collection for 2 fails.
    Router IOS is: c3900-universalk9-mz.SPA.150-1.M.bin".
    Can someone suggest what might be going wrong? Attached is the  IC_Server log file for reference.
    Thanks in advance,
    inner_silence

    Hi,
    Here are the exception found from the log :-
    [ Fri Mar 18  16:28:24 EDT 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,729,Exception for device 10.103.251.12 is
    java.lang.reflect.InvocationTargetException
        at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:719)
        at java.lang.Thread.run(Thread.java:595)
    Caused by: com.cisco.nm.xms.xdi.ags.system.CollectionFailed: java.lang.StringIndexOutOfBoundsException: String index out of range: 2
        at com.cisco.nm.xms.xdi.pkgs.LibInventory.EnergyWise_HelperMethods.getDeviceEnergyWise(EnergyWise_HelperMethods.java:72)
        at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.EnergyWiseAGI_ENERGYWISE_Mib.g$eval(EnergyWiseAGI_ENERGYWISE_Mib.java:51)
        at com.cisco.nm.xms.xdi.ags.EnergyWiseAGI.g$eval(EnergyWiseAGI.java:21)
        at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
        at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
        at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
        ... 1 more
    [ Fri Mar 18  16:28:24 EDT 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,761, Collection failed for the device : 63
    com.cisco.nm.xms.xdi.ags.system.CollectionFailed: java.lang.StringIndexOutOfBoundsException: String index out of range: 2
    Kindly check if the your device is running the required IOS on the device as per the device supported list :-
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html
    There are two 3925 listed with different versions :-
    Cisco 3925 Integrated Services Router   --> 1.3.6.1.4.1.9.1.1042  --> 15.0(1)M [RME]. if this is your device then upgrade to
    3925 to 150-1.M2
    and
    Cisco 3925E Integrated Services Router  --> 1.3.6.1.4.1.9.1.1144 --> 15.1(1)T
    Thanks,
    Gaganjeet
    If this post answers your question, please click the "Correct Answer" button

  • Inventory collection fails for ACE module (RME 4.3.1)

    I am trying to collect the inventory and ultimately the configurations for my ace modules.  When i try to do an inventory collection I get the error
    Device sensed, but collection failed
    Anybody have any ideas?
    Chris

    Post your IC_Server.log.
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com

  • LMS 3.2 Inventory collection - Job timeouts after ~5h, all devices "Not attempted"

    Hello All,
    We have a strange problem with LMS 3.2 regarding Inventory Collection.
    This problem started immediatelly after the LMS installation/upgrade (LMS 3.2 was installed on a new server, and LMS 2.6 database migrated to it).
    All Jobs finish as failed, with all devices "not attempted".
    Job hangs for a five and a half hours and then reports failed status.
    The symptoms are the same for scheduled jobs and manually created jobs.
    I also have opened a TAC case, but it seems that nothing relevant can be found in the IC_Server.log.
    Also, according to a packet capture, it seems that LMS does collect SNMP data from devices after a job is started...
    We tried to upgrade RME 4.3.0 to 4.3.1.
    One Job immediately after the upgrade was succesful (Inventory was collected for manually selected device), but the next day all Inventory Jobs were failing again with the same symptoms...
    Does anyone have a sugestion where to look for a problem trace?
    Thanks in advance!
    Ragards,
    Jasmina

    Hi Jasmina ,
    Please chech the Existing MDF pacakge :
    go to common service > software center > device update >>> check the checkbox for Cisco works common service   and click on check for updates
    --if there is an Update , please upgarde the MDF version..
    --Similarly look for any Available Device Pacakges update for RME , if there are Upgarde all the Device Pacakages ....
    --After all of the above Task is done , Now re-run the Job and it still fails then share the IC_server.log  again..
    Thanks--
    Afroj

  • LMS 3.2 Inventory Collection Failing

    Inventory collection is failing without any detailed error information.  I'm attaching IC_Server.log. Example device is 10.79.82.250, towards end of log. I see these messages but not sure what to make of them. SNMP communication is ok and walk of system mib is ok.
    [ Fri Dec 11  09:37:29 EST 2009 ],INFO ,[Thread-21],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventorySatellite.SatelliteHelperMethods,isVirtualMibSupported,32,
    cisco virtual mib,exception while interpreting cvsChassisMode value
    com.cisco.nm.lib.snmp.lib.SnmpValueException: Illegal Access. NoSuchObject being accessed as Integer.
    [ Fri Dec 11  09:37:29 EST 2009 ],INFO ,[Thread-21],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventorySatellite.SatelliteHelperMethods,isVirtualMibSupported,32,
    cisco virtual mib,exception while interpreting cvsChassisMode value
    com.cisco.nm.lib.snmp.lib.SnmpValueException: Illegal Access. NoSuchObject being accessed as Integer.

    Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this device.  Change the SNMP timeout to 10 seconds.  Make sure you apply the changes you make.  After doing that, inventory collection should work.

  • Inventory collection fails on VSS and 6509 switches

    We have approximately 12 devices that are listed as "Inventory Never Collected". When trying to run the collection manually we get errors as shown in the attached log files.
    We are running RME 4.3.1 under LMS3.2.
    The devices are running IOS versions:
    12.2(18)SXF7
    Can anyone assist?
    Jon

    The last error I saw was a timeout issue, and that is a known issue that can be solved by increasing the timeout.  With the higher timeout, clear out the IC_Server.log, then run a new inventory collection job and post the new log.  You may also need to do a sniffer trace filtering on all SNMP traffic to the device while performing the inventory collection.  This should indicate to what value the timeout needs to be set.

  • LMS4.0.1 Nexus 5020 - internal error in inventory collection

    Hello,
    2 Nexus 5020 (SysObjId ...3.719) brings internal error in inventory collection as following:
    "RICS0001: Internal Error, unable to process the collected data from the device"
    whereby 2 other devices from same type, same sysobjid are working well. SDT from v401 shows this device as supported.
    What can we do?
    Steffen

    Hi Steffen,
    Try updating the MDF and device packages for RME first and check the issue..
    If you have not applied the below patch before ,kindly apply this :
    Download the Patch for this BUg from cisco.com and apply it ..I hope that should take care of the issue.
    CSCto46927    Psu support changes from CCO to SPRIT
    lms40x-win-CSCto46927-0.zip (For windows)
    lms40x-sol-CSCto46927-0.tar (For solaris)
    Thanks
    Afroj

Maybe you are looking for

  • HT201263 iPhone 4 is in recovery mode but iTunes can not restore it.. Says unknown error occurred  (21) HELP!

    I've just got back of holiday and while there my phone decided to turn itself off, it would not come back on unless I plugged it into the wall charger, it said that I had to connect it to iTunes, but being on holiday I couldn't. So when I got home ye

  • Draw ontop of an image

    Can anyone tell me how i can paint a rectangle ontop of an image. I have this code where ive used mediatracker in another class called ImageCanvas that extends canvas. This is added to the screen below a panel that has another image and a button. Whe

  • LookAndFeel in JTree

    Hi All, i have a small problem in LookAndFeel for my Tree. in our project we are using JDK1.1.7B and Swing1.0..It is a client requirement..Is it possible to cretae my tree like windows Explorer..i am not geting tree structure..just i am geting bullet

  • JSP Include - Doubt

    Can i use dynamic value on the tag <%@jsp include page=dynamicValue/%>

  • I cannot download Extension manager 6.0.8 for CS6.

    Has the link for CS6 products been turned off? If so, why is it still offered? Adobe - Exchange : Download the Adobe Extension Manager