RME 4.3.1 on new server - 2 issues with Inventory and syslog

Hi,
I recently installed new server 2003 with LMS3.2 and after the problems with DevicePackages i resubmitted all device and the device center tasks that was missing now reappeared.
So I went on and added my two VPN3030 VPN Concentrators.
This device is supported for RME inventory and syslog
I got the config-archive running (!) so thats fine (Runs via HTTPS login)
I have two issues:
1. I can not get inventory to work .
I have communication going, and a packet trace/sniff show I have syslog going into RME and i see SNMP GET and respones to/from device
I see some java error logs in ic_server.log fil
I have tried with two different LMS32-servers
I have increased SNMP timeout etc
I tried deleted the device and rediscover
log are like this:
[ Thu Aug 19 10:12:30 CEST 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,761, Collection failed for the device : 3748
com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.lib.SnmpException: SnmpResponseNoSuchName on 10.3.6.2 while performing SnmpWalk(*) at index = 10
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.PortInterfaceAGI_RFC1213_HelperMethods.getIfTableEntriesFromDevice(PortInterfaceAGI_RFC1213_HelperMethods.java:639)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryVPN3000.PortInterfaceAGI_RFC1213_Mib.g$eval(PortInterfaceAGI_RFC1213_Mib.java:77)
    at com.cisco.nm.xms.xdi.ags.PortInterfaceAGI.g$eval(PortInterfaceAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    at java.lang.Thread.run(Thread.java:595)
[ Thu Aug 19 10:12:30 CEST 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,841,Device collection failed for 10.3.6.2
2.:I can not get syslog into the devices syslog reports
This is wierder than issue 1: I have two VPN3030, one actually does syslog fine, but one VPN 3030 does not
I havent done any thing different for the two device ...
one simply works, one doesnt ...
I get no syslog msg in device center for one of the device.
The syslogs ARE infact in the syslog.log
The syslog msg DO show up, but in Unexpected device report ...
The same VPN device does work with my second server so I think this is related to RME database on one specific server.
But i have tried delete device and rediscover etc ...
please help ...

ok - looks like i need TAC again ...
As for the syslog issue - this happens only for one device on one of my servers ...
That is what is strange ... So IP is coorect and ok - (they do get syslogs into DevCenter on one server and on other device)
Thank you for your reply - really nice that you take your time into this forum !

Similar Messages

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

New Tax Code Creation with CST and Service Tax

Hi
I want to know the complete procedure of new tax code creation with CST and Service Tax. I want to know the steps for calculation of % of that Tax Code.
Kindly help me out.
Thanks
Kshipra G

Hi Expert,
Before creating a Tax Code, Create two Condition Types(T-Code: OBYZ) for CST and Service Tax, which need to Select the below Items
Cond. class - D - Taxes
Calculat.type - A - Percentage
Cond.category - D - Tax
and while creating a Tax Procedure just select the Condition Type of CST and Service Tax and provide the Account Key for both Condition Types.
Assign the GL Accounts to the Account Keys in T-Code: OB40.
Create a Tax Code in T-Code: FTXP, which is to be assigned in T-Code: FV11.
Maintain the percentage in T-Code: FV11, with your Key Combination and
Try this procedure, which will help you...
Regards,
GK
SAP

I have a new Mac Book Pro with Retina, and Keynote crash almoset every time i use it?

I have a new Mac Book Pro with Retina, and Keynote crashes almoset every time i use it? I have the newest update.
Could you please help me? I have a lot of Keynote shows, and I have to use it now!!
I have saved a crash report, if you need it.

Apple will not write back to you. Telephone using the Apple Care phone number appropriate for your country and ask for a refund, if that is what you want to do.
I use Keynote everday, it does exactly what it says it will do, that is if your NOT using Mountain LIon.
There are many applications available
I have used MS PowerPoint professionally for many years on both Windows and Mac, I can assure you it can do everything that Keynote can do and very much more.
Which software you choose depends on who you are and who you are presenting to.
for interactive presentations look at:
PowerPoint
Adobe Flash
Adobe Director
Camtasia
Dreamweaver (an HTML application)
for simple photo slide shows:
iPhoto
iMovie
Picasa
Photomagico
Adobe Lightroom

Project Server 2010 compatibility with IE11 and Windows 8.1

Hi All!
Maybe a silly question since compatibility is always asked about older versions, but here is my question:
Is Project Server 2010 compatible with IE11 and Windows 8.1?
I personnaly tested with IE11 and it seems to be ok. All views and pages can be opened with IE11.
But what about windows 8.1?
Has Microsoft done any communication about this?
Thanks in advance for your helps.
Guillaume.
Guillaume Rouyre - MBA, MCP, MCTS

I am seeing a minor issue with the timesheet grid after users are upgraded from IE8 to IE11.
We are using Project Server 2010 with SP1 and Oct 2013 CU.
When some users (using IE11) switches between filters or views in the Timesheet page, the grid shrinks making to content un readable. The only way to get it back is to refresh the page. After a refresh, the grid returns to normal size, but the pane
divider is too far to the left and always must be dragged to the right in order to see the task names in the left grid.

When Apple solve problems with new iTunes calendar sync with windows and outlook?

When Apple solve problems with new iTunes calendar sync with windows and outlook?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Are any new AEBSn working reliably with internet and HD?

Are any new AEBSn working reliably with internet and HD?
Just wondering. Thinking of getting one.
Thanks ... Ken

Perfect from day 1. Easy to set up but I made sure to glance through the DesigningAirPortExtreme802.11nNetworks.pdf that is available online so I had an idea of what to expect before I got started.
I don't have a hard drive hooked up but I did hook up a 512 MB Flash thumb drive to see how it would work. To the base station it is just another drive so it's the same thing as hooking up a regular hard drive. I tested it both formatted as an HFS drive and a FAT drive to see the difference in how it presented the drive.
I also tested the network connectivity in Windows XP using Bootcamp. I tried it both with the default drivers that get installed as part of Bootcamp and with the drivers from the D-Link DWA-645 which uses the same Atheros AR5008 chip set as my MacBook Pro.

Office Web Apps Server Name issue with Sharepoint 2013

I have a POC Lab setup for SharePoint/OfficeWebApps with SSL offloading. I am using IIS reverse proxy for my SSL offloader. Most systems can connect to SharePoint and OWA through the Loadbalancer and create documents as desired. The
configuration is as follows:
DNS points:
sharepoint.contoso.com to the reverse proxy address that handles sharepoint.
owa.contoso.com to the reverse proxy address that handles owa.
My OfficeWebApps farm uses an internal and external url of
https://owa.contoso.com and uses ssloffload.
My SPWOPIBinging connects to owa.sharepoint.com (through the reverse proxy) and is configured with the external-https zone.
The name of the OWA server is nyc-owa1.contoso.com.
The issue is as follows:
If I flush my dnscache before connecting to
https://sharepoint.contoso.com, and then use OWA in sharepoint, my client DNS cache will list sharepoint.contoso.com, owa.contoso.com AND nyc-owa1.contoso.com!
Where is is getting the name of the actual owa server?
If I simulate an Internet client that cannot resolve the internal name nyc-owa1.contoso.com, but only the public names of sharepoint.contoso.com and owa.contoso.com, the client cannot successfully edit a new or existing file with OWA, the browser hangs with
Java errors ('SYS' is undefined etc.)
When I add either the real IP address of the server nyc-owa1.contoso.com OR the reverse proxy address for nyc-owa1.contoso.com to a hosts file, the client works normally.
I would like to know how the client is getting the OWA server's name and how to control that behavior.
Thanks for reading this!!
-Scott

I'm glad to here that the problem has been fixed. Thank you for sharing your experience here, it will be helpful to other community members who have similar questions.
Cheers,
Steve Fan
TechNet Community Support

Server Issue with Oracle and ASP Connection

We got a new server and are trying to set it up with Oracle Client to allow our web application to connect to the database server. We are getting connection errors, but on the old server, it works fine. We have Windows 2003 and IIS 6.0 on the new server and Win2K and IIS 5.0 on the old server and it's Oracle 8i. Here is the error...
Err.description=Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.
Err.number=-2147467259
... We have the client installed, so not sure what to do from this point on. Can it be some type of a sharing issue, or network firewall issue?

Have you granted the IIS user read & execute access to the %ORACLE_HOME% directory and subdirectories?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

SharePoint Server Publishing Infrastructure with drag-and-drop

Hello,
When I activated "SharePoint Server Publishing Infrastructure" future, I can no longer use drag-and-drop functionality between two libraries (eg. drag from Document Library to MyDoc library). When I disable it, drag and drop is possible.
But I need both of this functionalities, because i use Managed navigation. What should I do?
Thanks in advance,
Tomaz

Hi Tomaz,
According to your description, I could reproduce this issue as:
1. Create a web application with team site
2. Create a new library called docA, upload a new document
3. Then I could move the document to Document library with drag-and-drop feature
4. Activate SharePoint Server Publishing Infrastructure
5. I could not move the document from Document library to docA library with drag-and-drop feature
6. Upload a new document to docA, then also could not move it to Document library with drag-and-drop feature
Since you also want to use Managed Navigation, you can use Content and Structure feature to move a document from one library to another library. You can do as Site Settings->content and structure under Site Administration->clicking on the library,
then you can move or copy the document to the destination library.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Weblogic server proxy issues with twitter4j api

I am using weblogic 10.3.4 using twitter4j Api running behind the proxy. I am not sure why I am getting this error. I do have the proxy name,port number, userid and password set in the twiiter4j api. The same code works fine for me in tomcat behind proxy. When I was trying to migrate from tomcat to weblogic i am getting following error. Any help is really appreciated. I am not sure its the issue with weblogic
Thanks for the help
Vinoj
<Failed to communicate with proxy: tmsproxy.tms.toyota.com/80. Will try c
onnection stream.twitter.com/443 now.
weblogic.net.http.HttpUnauthorizedException: Proxy or Server Authentication Required
at weblogic.net.http.HttpURLConnection.getAuthInfo(HttpURLConnection.java:297)
at weblogic.net.http.HttpsClient.makeConnectionUsingProxy(HttpsClient.java:440)
at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:351)
at weblogic.net.http.HttpsClient.New(HttpsClient.java:527)
at weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:239)
Truncated. see log file for complete stacktrace
Dumping beanImpl -> ejbName map
weblogic.management.j2ee.mejb.MejbBean: Mejb
connect timed out
Relevant discussions can be found on the Internet at:
http://www.google.co.jp/search?q=944a924a or
http://www.google.co.jp/search?q=24fd66dc
TwitterException{exceptionCode=[944a924a-24fd66dc 944a924a-24fd66b2], statusCode=-1, message=null, code=-1, retryAfter=-1, rateLim
itStatus=null, version=3.0.4-SNAPSHOT(build: f34757f6d8512eca8028601d9de303e0173d8d42)}
at twitter4j.internal.http.HttpClientImpl.request(HttpClientImpl.java:177)
at twitter4j.internal.http.HttpClientWrapper.request(HttpClientWrapper.java:61)
at twitter4j.internal.http.HttpClientWrapper.post(HttpClientWrapper.java:98)
at twitter4j.TwitterStreamImpl.getFilterStream(TwitterStreamImpl.java:304)
at twitter4j.TwitterStreamImpl$7.getStream(TwitterStreamImpl.java:292)
at twitter4j.TwitterStreamImpl$TwitterStreamConsumer.run(TwitterStreamImpl.java:462)
Caused by: java.net.SocketTimeoutException: connect timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at weblogic.net.http.HttpsClient.openWrappedSSLSocket(HttpsClient.java:565)
at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:287)
at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:364)
at weblogic.net.http.HttpsClient.New(HttpsClient.java:527)
at weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:239)
at weblogic.net.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:255)
at twitter4j.internal.http.HttpClientImpl.request(HttpClientImpl.java

Hi,
Has anybody got the solution like 64-bit libroxy or its source code to compile as 64-bit? I'm facing the same problem.

Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.

Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.

SharePoint 2013 Anonymous (public) site and Office Web Apps Server 2013 issue with download.aspx

Our organization has a public facing anonymous site in SharePoint 2013 which allows access to documents (docx) in a library. ViewFormsLockdown is activated as we present the documents via CQWP / custom template. We are combating the usual
issue of multiple login prompts when using Internet Explorer when a user accesses said document. We also have tried using the Word Viewer (view only mode) from Office Web Apps Server 2013 which works well, but ...
the problem stems from the fact that users can go the file menu from the word view and choose to download the document (which is what we want), unfortunately it looks like the link redirects via /_layouts/15/download.aspx which also presents a login
prompt. Much has been written out there about doing direct links for documents via /_layouts/download.aspx to address multiple login prompts when the document is opening in word (from IE).
I've tried nearly every combination of recommendations (disabling client integration, browser file handling (permissive/strict), ViewFormsLockdown feature, web.config modifications with options and propfind verbs and more) all to varying levels of success,
but never totally getting rid of the prompt. It has been stated that because the downloads.aspx inherits from Microsoft.SharePoint.ApplicationPages.Download this will not allow anonymous access. We really want to use the word view from the Office
web app and have the file download functionality work from the menu there ... can anyone suggest an alternate fix? I might be wishing but will appreciate any guidance offered ...
cheers,
Dean
some reference links (but not all) for various things we've tried:
http://mohitvash.wordpress.com/2013/06/18/sharepoint-download-a-file-programatically/
http://blog.sharedove.com/adisjugo/index.php/2012/09/29/open-sharepoint-files-in-edit-mode-from-client-applications-and-not-read-only/
http://stackoverflow.com/questions/375390/office-documents-prompt-for-login-in-anonymous-sharepoint-site
http://yalla.itgroove.net/tag/anonymous-access/
Glifnard

I'm glad to here that the problem has been fixed. Thank you for sharing your experience here, it will be helpful to other community members who have similar questions.
Cheers,
Steve Fan
TechNet Community Support

New to Mac - Issues with imported Excel Docs

Imported my Excel docs from my PC and they made the trip but when I open them, some don't work properly. I have some billing statements that I made with Excel templates. Whenever I open and try to save them, I get an error message:
Users/JaneDoe/Documents/Private Practice/Billing Statements/Jones 2 16 05 MAC.numbers
I'm having some issues with Word documents that have tables in them also.
I love my new MAC but have many business forms that I need to use. Any help would be appreciated.

Thanks for your answer, I suspected as much. I've been thinking about this and have decided that since those are historical files and not working files, I'll just leave them alone and create new billing statements using Mac. It's certainly easy enough to do.
The Word documents, though, are a different story. I've scanned pages out of some manuals and many of the pages are questionnaires with tables to indicate answers. Some documents are multiple pages and every other page I view is blank. It's difficult and sometimes impossible to delete the blank page or move the table up. If I can't salvage these, I'll have to go back into the manuals and scan the pages all over again.
And I don't want to partition my hard drive, run Windows parallel or invest in Office for Mac because that all defeats the purpose of my transition to a Mac in the first place - ease of use.
Thanks again.

RME 4.3.1 on new server - 2 issues with Inventory and syslog

Similar Messages

Maybe you are looking for