RME cannot generate a syslog report.

Hi,
I have an issue with rme 4.2 from LMS 3.1
When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.
SyslogCollector - [Thread: Thread-9] WARN , 28 Apr 2011 14:45:10,400, Unable to add monitor for cwkstmm2009
SyslogCollector - [Thread: main] INFO , 09 May 2011 16:12:35,510, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 09 May 2011 16:12:35,519, System Initialized.
SyslogCollector - [Thread: main] WARN , 09 May 2011 16:12:40,948, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 09 May 2011 16:12:41,027, Service started...
SyslogCollector - [Thread: Thread-10] WARN , 09 May 2011 16:12:44,024, Unable to add monitor for cwkstmm2009
SyslogCollector - [Thread: main] INFO , 17 May 2011 11:08:17,360, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 17 May 2011 11:08:17,364, System Initialized.
SyslogCollector - [Thread: main] WARN , 17 May 2011 11:08:23,433, Unable to get the filters for subscriber cwkstmm2009. Default value will be used.
I modified Syslog.properties file to see DEBUG and this it the output
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,152, SCCleaner - About to fire close() on collector engine...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,153, SyslogCollectorEngine - Closing evaluators...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,153, FcssEvaluator - Closing LogReader...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,153, FcssEvaluator - Closing EmblemProcessor...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,154, FcssEvaluator - Releasing SyslogQueue...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,164, FcssEvaluator - Closed successfully...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,165, SyslogCollectorEngine - Closing filters...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,165, FcssFilter - Closing FilterProcessor Threads...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,165, FcssFilter - Closing Filter Store...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, FcssFilter - Closed successfully...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, SyslogCollectorEngine - Closing forwarders...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, FcssForwarder - Closing Forwarders...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,166, FcssForwarder - Releasing resources...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,167, FcssForwarder - Closed successfully.
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,167, SyslogCollectorEngine - Closing monitor...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,167, SyslogCollectorEngine - Closing monitor task...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,168, SyslogCollectorEngine - Closing recovery assistant...
SyslogCollector - [Thread: Thread-3] DEBUG, 17 May 2011 11:41:54,168, SyslogCollectorEngine - Closed successfully.
SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:05,837, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:05,840, System Initialized.
SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:06,275, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 17 May 2011 11:42:10,863, Service started...
I post the Syslog Collector Status image where it shows NOT REACHABLE.
Can you help me, please.

Hi,
I have tha same problem while subscribing. it gives me the error "could not subscribe to the collector"
Actually I want to generate Syslog and SNMP traps with Cisco lms 3.0
please help me about the error and am i configuring the right thing for my goal ?  !!!!!
Rizwan Haider Siddiqui.......
[email protected]
+92-33-44-2222-39

Similar Messages

  • LMS 3.2 - RME 4.3.1 - Report Generator scheduled Syslog-Reports

    Hi all,
    within Report Generator in RME 4.3.1 I discovered an issue with newly added devices in scheduled Syslog Severtiy Level Summary Reports.
    Settings for the report
    - Device Selector: All Devices
    - Data Range: 24 hours
    - Schedule: daily, at xx:xxh
    Our purpose for this job is to get a daily summary of syslogs of all managed devices.
    But there seems to be a problem with the dynamic update of newly added devices to DCR and RME-Device-DB.
    The report only creates output for all managed device at timestamp of report creation, not for newly added devices.
    Is this a know bug, or is this the planned behavior?
    Any suggested workarounds/fixs are appreciated.
    Thanks a lot for your help.
    Lothar

    This is documented in the online help for the report generator, sync archive, etc. pages.
    # Group Selector — To schedule a job for dynamic group of devices.
    The job is scheduled only for the devices that are present in the selected group at the time when the job is run. The customizable group selector for jobs evaluates static groups also as dynamic during run time.

  • Cannot generate AWR/ADDM reports in Oracle 10g

    Hi,
    We are running 10.2.0.3.0 and troublshooted the performance problem for some queries. But when tried to run AWR/ADDM reports from OEM and got the following messages:
    Insufficient Data in Interval. For displaying data on this page, two historical snapshots are needed. Make sure that two snapshots are present in the target database instance. In addition modify the interval so that it is contained within two available snapshots
    I checked the scheduled jobs in this DB,
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Oracle Label Security and Data Mining options
    SQL> select JOB_NAME from dba_scheduler_jobs;
    JOB_NAME
    PURGE_LOG
    FGR$AUTOPURGE_JOB
    GATHER_STATS_JOB
    AUTO_SPACE_ADVISOR_JOB
    Has anyone anyidea why AWR/ADDM reports cannot be run? Thanks
    Liz

    Hi,
    If you want you can execute snapshot at your required time as suggested by people.
    However Oracle 10g by default take snap at every one hour.
    To check
    select snap_id, to_char(BEGIN_INTERVAL_TIME,'DD-MON-YYYY HH24:MI') BEGIN_INTERVAL_TIME,
    to_char(END_INTERVAL_TIME,'DD-MON-YYYY HH24:MI') END_INTERVAL_TIME
    from dba_hist_snapshot
    You can generate AWR Report by executing following SQL, Connect as SYS
    SQL> @$ORACLE_HOME/rdbms/admin/awrrpt.sql
    Input required details it asks, you can get AWR report in HTML or text format.
    ADDM Report:
    @$ORACLE_HOME/rdbms/admin/addmrpt.sql

  • Cannot generate General Ledger report

    Hi Experts,
    I have a user with various authorizations, but should be authorized to run the General Ledger report. However, the system ask for authorization of General Ledger even if it is already authorized in the Authorization Module. We used document ownership and the user is also authorized in all reports. But still the authorization check appears.
    Is there any other pre-requisite authorizations to be able to run the General Ledger? We are using 8.8 PL12.
    Many thanks,
    Don

    Hi,
    Give Authorization to
    1. Chart of Account and Balance
    2. Business Partner and Balance
    If not working
    Remove the data ownership and check whether it is running..
    If running then the problem in Data Ownership only..

  • I get a crash notice. Firefox will not launch at all -- it keeps giving crash notice. I also cannot generate a crash report. I have uninstalled and reinstalled -- same issue. It does not launch.

    Firefox crashed this morning. It will not launch even after being uninstalled and reinstalled. All I can get is a crash box. It will not relaunch in any way
    == This happened ==
    Every time Firefox opened
    == this morning -- it did not open ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; yie8)

    This sounds the same as my issue. I was browsing in Firefox v6.0 last night and all of a sudden it closed with no notice or error message. When I tried to open FF I received the messaga; We're Sorry - Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts." I does not restart. I have been using IE to browse for a solution and nothing works other than opening as administrator. Now this problem is only on one of my laptops and is fine on my desktop and other laptops so it appears to be something specific to my laptop which is running Window XP Home and Service Pack 3.
    Some suggestions were to change the profile (did not work), end the firefox.exe process in task manager (not running in processes) and delete an xpicleanup.exe (not listed).
    The only thing that works is to run as administrator but I have to do this everytime. Is ther a solution?
    file.

  • LMS 3.2 SP1 RME showing no records in syslog report while same report in device center shows

    Hi All,
    I have LMS 3.2  SP1 running on windows machine, when i am generating 24 hours report(Standard) in RME i do not see any records, while in Device center  in Device Diagnostic center, i can see the same report showing the logs.  i have checked the sylog.log file, i can see the logs in it. I have restored the original database by Restoredborig.pl, the RME database also but no result.
    I would appreciate quick reply in this matter as i am facing this issue since long time and tried all possible things.
    Regards,
    Chander

    Hi Chander,
    Share  the screen shot to Syslog Collector status.
    Thanks-
    Afroz

  • Core switches experience High CPU while generating syslog report from LMS

    Hi Everyone,
    Are there anyone who experience that the CPU utilization of some devices went up while generating a report from RME. Basing from other monitoring tool SNMP is taking up a huge cpu process. Any idea why this happened considering that the report is generated daily but only on one instance it caused the core switches to be paralyze due to high cpu. Changing the SNMP community string is the immediate action that resolve the issue to disconnect it from LMS.
    BTW, this is LMS 2.6.
    Thank you.

    The problem did not reoccurred any more. When I checked on the Syslogcollector.log it appeared that it is unable to subscribe. I assumed that the reason why snmp packets were flooded during the time that it they experience high cpu is because the client is generating syslog report for all devices while the syslog collector is not subscribe. Is this possible?
    Thanks

  • How to edit a scheduled Syslog Report job in RME 4.03

    Hi
    I am using Cisco Works LMS 2.5, with RME 4.03
    There are 4 scheduled syslog report jobs that are set to run. We had a problem with syslog that meant that these reports returned zero records.
    Syslog and manual reports now work fine, but I need to edit or delete and re-create the scheduled jobs as the problem still exists with these. I'm thinking that perhaps the required devices are not selected (I had to re-build RME db from scratch recently also)
    But I cannot find them anywhere!
    All I can find in RME Jobs page is the instance of the job.
    How do I edit the main job?
    Help much appreciated
    Thanks!
    Phil

    The answer was provided by TAC.
    It's not possible to edit jobs. the ones you see in RME Jobs are the instances of the jobs.
    The only way to delete these jobs is via the CLI:
    +  Stop daemons :
    Net  stop crmdmgtd  “wait till its down”
    +  cd to C:\progra~1\CSCOpx\databases\rmeng>
    +  Issue the command :
    dbvalid  -c "uid=dba;pwd=;dbf=rmeng.db"
    example  :
    C:\Program  Files\CSCOpx\databases\rmeng>dbvalid -c "uid=dba;pwd=c2kY2k;dbf=rmeng.db"
    please  send me the results
    please  note that my RME db password is the default à c2kY2k you  have to use the correct RME pwd .
    +  Start daemons manager : net start crmdmgtd “wait till it starts  ”
    One for the library :)
    Thanks for your responses tho. cheers!

  • Cannot Extract Embedded Font in PDF Report Generated Using Crystal Reports XI

    The issue is that sometimes the PDF reports generated by Crystal Report XI are not showing the fonts properly. Arial font is used in the Crystal report template(.rpt file) for field label and data elements. When the report is opened in Adobe Reader, it displays the message - "Cannot extract the embedded font 'AAAAAA+ArialBold'. some characters may not display or print correctly." Other PDF Readers like Foxit show blank spaces instead. I tried to change the font to Courier New, Times New Roman etc but still getting the same message.
    The issue is consistent when the application is deployed in Windows server. When deployed in Unix server the issue happens very occasionally. The font files are available and installed in the UNIX box.
    Please tell me why this error message is shown and also tell me how to get it fixed.

    Hi Scot
    Just replied to your email re. conf call.
    In the meantime.
    1st question.  
        Some of our developers are creating the reports under crystal 2008, while some are 2011.
        Could this be a problem, when they are run by the SDK?
        Should we upgrade all our developers to crystal 2011?
    The version of CR a report is created in should not matter at all. I am 100% certain this is not the issue.
    2nd question
        When the report is run, to create the pdf... why would it actually embed the font on the pdf?
        if they weren't embedded.. wouldn't it just pull up the proper font, if the user's pc had that font on their
        pc?
        if it does the common fonts aren't embedded, we would just have to worry about the things like
        barcode 3 of 9
    I can not answer this as that essentially is the way the product is designed. It may look like a limitation, but there are no work-arounds and I would not consider this to be a bug. Perhaps an enhancement, but a pretty faint hope there. And even if, enhancements take very, very low priority and take long, long time before implementation.
    3rd question
        Would the fonts, just need to be installed on the server?   we've seen some indication, that they
        also need to be in a java sub-directory
    The fonts must be on the server as that is where the report engine does it's work, then the report is streamed to the user's browser. E.g.; there is no work done on the browser. Also, the process must have rights to access the fonts.
    One last point. You mention deployment to Linux. Linux is not supported. Please see: SAP Crystal Reports, Developer Version for Microsoft Visual Studio - Supported Platforms
    I suspect this is more an issue with CR not working with the framework for Linux.
    - Ludek

  • Repository reports cannot generate HTML report

    Hello
    In our Computing Labs, we have Oracle9i Designer installed on Windows XP Professional.
    Our students are having a problem when they try to Run Report in Repository Reports.
    The student first sees an error message for Internet Explorer that says "Cannot find "file:///c:/docume~1/%username%/LOACLS~1/Temp/ck*.tmp.html". Make sure...". %username% of course being the current user and ck* being the filename of the report.
    If the user examines the contents of ~/Local settings/Temp, they will see that when this error message comes up, there is a file ck*.tmp (no HTML extension). The HTML file is never generated though.
    When the user click on the OK button for the error message, Internet Explorer open to a blank page. When IE is closed, Repository Reports posts a message that says "CDI-21309: Unable to delete file c:\docume~1\%username%\locals~1\Temp\ck*.tmp.html". When the OK button from this message is clicked the user is returned to Repository Reports, but the report is never generated.
    Our users are set up as Dynamic Local Users, and are members of the Power Users group. We do have some pretty tight restrictions on Group Policy.
    When a user who is a member of Administrators (also dynamic local user) logs in and attempts to create a report, (s)he has no problem. Repository Reports functions exactly as it should.
    I have already given Power Users complete access to all files on the hard drive, so I don't think it could be an NTFS file permission issue.
    If anyone has any advice, it is certainly welcome. Our students need to be able to print off these reports for classes, and I am not familiar at all with Designer.
    Thank you very much
    David Summers
    University of Idaho ITS
    Student Computing Labs

    Here is how I resolved my problem with non admin users not being able to run reports.
    Designer 9i ver 9.0.2.80.6
    Repository Reports ver 9.0.2.80.4
    Problem - When non Administrator users try to generate a report in Repository Reports, they either get a file not found error for the HTML report (and IE will not show the report) or Repository Reports stops responding (and rwrun.exe has to be manually killed).
    Fixes
    -%TMP% and %TEMP% environment variables must resolve to paths that are fewer than 30 characters. In our environment (WindowsXP with Novell Dynamic Local Users), %TMP% and %TEMP% were the temp folders in the user's profile, which is a long path. Changing the environment variables to point to c:\temp was one step in resolving the issue. Although there is a patch released related to this, my installed version is post-patch and I still had to change the temp environment variables.
    -HKLM\SOFTWARE\ORACLE\HOME0\REPORTS_TMP must be set to a writable area for the user group using Designer and Reports. In our environment it was set (during install) to the local administrators temp space (in administrators local profile) - I'd guess it gets set to whatever %TMP% or %TEMP% is for whichever user installs the application. Our users cannot write to this folder, so setting this registry value to c:\temp was another step in resolving the issue.
    -c:\OraHome1\reports\logs must be writable for whichever user group is running Reports. Before making this change but after making the previous two changes, reports would simply freeze for Power Users. When trying to log off, rwrun.exe had to be manually killed - and sometimes a Dr Watson report would come up and ask to be sent in. By granting the user group that uses Reports write permissions to this folder (or the equivalent in your environment), Repositry Reports no longer freezes and successfully generates the HTML report.
    David Summers
    University of Idaho ITS
    Student Computing Labs

  • Unable to generate BUG summary report in RME

    Hi, I am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014
    I am using LMS3.1 attaaching snap shot of my patch level and application version running on LMS...
    Please help me to solve this isue.
    Thanks

    Upgrade to LMS 3.2.1
    Install the patch for version 3.2 mentioned here https://supportforums.cisco.com/docs/DOC-16806
    Then it works again
    Cheers,
    Michel

  • LMS3.2 Syslog reports very slow when send via email

    Hello,
    we have ~5000 devices in LMS3.2 and we have a problem with syslog reports.
    When I create a "severity level summary report" for 5000 devices for the last 24hours and select as run type "immediate" it needs ~2-3 minutes. That's ok.
    But when I create exactly the same report and select the run type "once" , it needs ~3 hours. ("Once" means that the report is send via email after it's finished).  It happens with report type "pdf" and "csv".
    What can be the problem ?  Or is it usual ???
    Regards
    Hendrik

    The scheduled reports can output a full list of messages where as the immediate reports output a limit of 10,000 records.  If you have a lot of syslog messages, it can take a considerable amount of additional time to generate a full report.

  • No syslog message appear at Ciscoworks syslog report

    Hi,
    We just installed new Ciscoworks LMS 3.2, and sent all switches syslog message to this Ciscoworks LMS 3.2 and old Ciscoworks LMS 2.5 server.
    Old Ciscowork LMS 2.5 server can receive syslog message and syslog appear at old LMS 2.5 syslog report, but no syslog appear at new LMS 3.2 syslog report for some devices. I checked syslog collector, it seems ok, I used WireShark to check the new Ciscoworks LMS 3.2 server have received syslog message sent from device, and only use default syslog filter at new Ciscoworks LMS 3.2 server.
    Please help to advice me how to troubleshooting this problem.
    Best Regards,
    Jackson Ku

    Is your collector subscribed? You could verify this under RME -> Tools -> Syslog -> Syslog Collector Status. Please post the screen shoot of this page.
    Do you see the syslog messages in syslog.log/syslog_info file on the server?

  • CGNAT: ¿ syslog reporting of CGNAT sessions?

    Hello team.
    I would like to know if besides the comprehensive Netflow support for session accounting, there also is (or is not) chance to configure basic SYSLOG reporting when NAT sessions area created/deleted.
    Thank you very much in advance
    Best regards, Rogelio Alvez

    Hi Rogelio,
    starting from 4.2.1, the syslog is also supported as a logging mechanism for Nat44 and DS Lite on both ISM and CGSE.
    You can also configure Bulk Port Allocation to reduce the number of reports generated.
    Cheers,
    N.

  • ISE : Generate automatically a report every month

    Hello,
    We have ISE at work and I would like to know if it is possible to automate the execution of the report : "Guest sponsor summary / 30 days) at the end of each month and save the result as csv file on a windows share ?
    Thank you in advance for your help.
    Christophe

    Hi,
    Scheduling and Saving ISE Reports
    You can customize a report and save the changes as a new report, or restore the default report settings.
    You can also customize and schedule ISE reports to run and re-run at specific time or time intervals. You can also send and receive email notifications once the reports are generated.
    Note You can save or schedule (customize) ISE reports only by using the Primary PAP nodes.
    Step 1 Run a report as described in Running and Viewing Reports.
    Step 2 Click Save As in the top right-hand corner of the report summary page.
    Step 3 Choose Report or Scheduled Report .
    Step 4 Enter the required details in the dialog box.
    Step 5 Click Save as New .
    You cannot schedule the following reports:
    Authentication Summary
    Health Summary
    RBACL Drop Summary
    Guest Sponsor summary
    End point Profile Changes
    Network Device Session Status

Maybe you are looking for