RME card - compatible?

Hi folks,
I've been avoiding both Leopard and Intel Macs in an attempt to keep all plugins and apps compatible and running.
I'm thinking of moving to Leopard (on a G5 PPC for now), using Logic 8.0.2.
I have an RME Hammerfall 9636 audio card. Will it work under Leopard? Anyone using this setup?
Regards - Colin

Woah...hang on there cowboy!;). If its definetly the 9632 card you've got and not the 9636 then you should be fine. If its the 9636 card however then you should read this...
http://www.rme-audio.de/entechinfo_content.php?page=content/support/en_osxcompat
Message was edited by: StinkyOldC

Similar Messages

128 GB SD card -- Compatible?

Is this card compatible with the yoga:
http://www.amazon.com/Transcend-SDXC-Flash-Memory-TS128GSDXC10E/dp/B00966J1WC/ref=br_lf_m_1000853001...
Solved!
Go to Solution.

That 128GB SDXC card should work... I am using this 64GB SDXC card for my music on my Yoga:
http://www.amazon.com/dp/B0070WU51U

Is the FX5200-T128 video card compatible with an Athlon 64 CPU and a K8N mobo?

I am building a new computer based on the Athlon 64 3000 processor and the mobo MSI K8N Neo-FSR.
I intended to use MSI MS-8907 GeForce FX5200-T128 as the video card.
However I have been told that this video card might not be compatible either with the Athlon 64 processors or with the mobo MSI K8N Neo-FSR.
Is it compatible or not?
If it's not compatible, what is the cheapest MSI video card compatible with the Athlon 64 and the K8N?
Thank you in advance for your help.

If it's there, it means they at least inserted the card, booted, and installed drivers, as far as what they do from that point is anyones guess. You will see the far right column shows 4x or 8x.
I agree, it is minimal info at best and not my idea of what should be included in a test report.
I don't see any reason why that card would not work, the market is saturated with that type of card.

Is DeckLink card Compatible with FMLE?

Black Magic Design.
DeckLink Studio
Full Resolution SD/HD SDI & Analog Editing Card
i am using this card for streaming in flash media live encoder.
Please confirm, is this card compatible with FMLE.
and operating system windows vista.
Regards
Sheeraz Kaleem

FMLE 3.0 works with Black Magic Decklink and Intensity Pro cards on SD sizes only
FMLE 2.5 works with these cards at HD sizes but because of single core support of Resize Filter and VP6 encoder in FMLE 2.5, you will not be able to get desired Output FPS at HD sizes from FMLE 2.5 also.
So if we you are planning to run these cards at SD sizes then you can go for these devices.
These cards are right now not in certified list of devices of FMLE but many people have tried these cards at SD sizes and they worked fine for them at SD sizes.
FMLE 3.0 not supporting BlackMagic HD sizes is a bug

Is NVIDIA GeForce 6600 card compatible with OpenGL 2.0?

Hi there -
Is my GeForce 6600 card compatible with openGL 2.0?
I have some software that tells me it is not and I've just spent lots of money buying it - I did make a quick check on-line before making my software purchase and found out that the whole 6000 series was compatible.
Reading again it says it has been OK for 2.1 from June 2006 onwards. I bought my Mac in May 2006
Can I install a new driver or something (almost sounds like I know what I'm talking about)?
If so is this something I can do or do I have to take my whole machine to the hospital?
I'm not that confident messing with too much technical stuff so treat me like an idiot ... please!
Any help would be greatly appreciated.
Regards - Deano

Hi-
Back from work......
BD has you going the right direction on RAM.
CS4 needs as much RAM as you can throw at it.
Buy only guaranteed Mac compatible RAM.
As for hard drive, getting a TB or so for storage is great, but you also need a fast scratch drive, separate from the system drive.
Improvements to hard drive technology have been made since the G5 was released, so replacing the system drive with a new one is a good idea.
For the fastest system drive, which helps overall performance, the Western Digital Velociraptor 300GB is an ideal candidate.
For more of a budget drive, but still fast, a WD6400AAKS 640GB drive is an overall winner, with fast read and write times, and all that capacity confined to two platters in the drive.
This is one of the keys to the drives performance prowess.
For scratch, you will have large files that are written, changed, erased, as filters, etc. are applied.
PS gobbles drive space even more than it eats RAM.
Again, the WD6400AAKS, or a WD1001FALS 1TB drive is what you should look at.
And when we talk scratch drives, I mean that it does nothing else.
Not for file storage, etc.
File storage needs to be relegated to a third drive for system optimization.
To recap, a fast boot drive (OS and applications only), a scratch drive, and as many file storage drives as you need for multiple copies (min 2) of all work.
As for graphics card, yes there is improvement to be had, especially with regard to OpenGL support in CS4.
PS also leverages the GPU of the graphics card, so power is desired.
A Mac 7800GT, Radeon X1900 G5 Edition, or a flashed Geforce 7800GTX are the three top performing cards.
A Geforce FX4500 is also a possible candidate if your pockets are very deep.
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html
Of the three cards, the 7800GTX is the top card, and is relatively easy to find. The 512MB version is the most desirable.
You will be looking on eBay for Mac compatible PCIe graphics cards in one of the flavors that I have named.
A bit from Adobe:
http://kb2.adobe.com/cps/404/kb404898.html
http://www.adobe.com/products/aftereffects/opengl.html

Is the AT-MIO-16E-2 ISA card compatible with a Pentium III 1GHz with a 133MHz bus?

Is the AT-MIO-16E-2 ISA card compatible with a Pentium III 1GHz with a 133MHz bus? The system has an ISA slot available but I'm afraid the bus speed is too fast for this old card. Do I need to buy a new PCI card to work in this system?

Hello;
As long as your machine has a ISA slot and that the NI-DAQ driver is properly installed on it, you shouldn't have any problems with it.
Regards
Filipe A.
Applications Engineer
National Instruments

Pavillion h8-1010it video card compatible

I would like to know if there are video cards compatible with my HP Pavilion HPE h8-1010it and if there are, what are they? thanks

Hi,
Please review this posted document on: Guide to Selecting a Discrete Video Card
There are many video cards that are compatible with your PC. Can you help us narrow down the selection with some other criteria?
Most non-UEFI enabled video cards should work. The problem is that many video manufacturers don't indicate all of the technical requirements for a given video card.
The following HP OEM certified video cards should work in your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Where can I find video cards compatible with my old macs?

I have 4 mac G4s I am using for an installation at a gallery. Two are Sawtooth and the other two I believe are yelp. I need to put additional video cards in them.
I am looking for video cards that can run dual monitors. I have been looking for
mac compatible PCI video cards that run at 2x.
Locally no stores I visited carry mac-compatible graphics cards. I haven't been to the Apple store yet because I have never found a product there that was useful for these machines, they're just too old.
Online I have found at macsales.com
RADEON™ PCI Mac Edition by ATI
for $100
and at yourmacstore.com
ATI RADEON™ 7000 PCI Mac Edition
for $50
Does anyone know if either of these will run dual monitors? If they will run on my G4s?
Any suggestions of what kind of card I can use and where I might find them at the best price?
g4 sawtooth and yelp Mac OS X (10.3.9)

The 7000 supports only a single VGA monitor; the Radeon PCI Mac Edition supports one VGA and one DVI monitor connection - you could use a DVI-to-VGA adapter to drive dual VGA monitors.
Both are PCI cards and the performance will be slightly lower than using an AGP card, but you benefit from the savings in cost. Getting four AGP-compatible cards would be much more expensive.
-Douggo

There is the Technisat SkyStar2 PCI card compatible?

Hi!
I have a MegaPC 865 with an AGP Geforce MX440-SE grapichs card and I want to buy this DVB-S card, but I've read there's some problems when you connect it next to the AGP slot, but I don't know if this happends in this barebone...
Anyone have try it?
Thank you!
PD: Sorry for my poor english .

Hi Stu!
The card isn't too big, I think that there's enough space for it. The really problem is some people says that if you put it in the PCI slot under the AGP (the Mega 865 has only one PCI slot) you may have some problems: maybe the card isn't recognized or maybe the computer don't start. But there's other people says that they not have this problem. In the official web (http://www.technisat.com/) says (for the skystar2):
System requirements PCI-Devices
* IBM compatible PC with Pentium III 700 MHz or higher
* 1 available PCI slot (do not use the one directly under AGP graphic card)
I think that they have received some mail from people that has problems with their configuration, because I've read that it works in other cases.
If nobody have try it before, I'm going to be the first, hehehe. If the card doesn't run, I can put it in my PC.
Thank you for you reply.
Bye!

Is the Intel I340-T4 Ethernet card compatible with LabView 8.6?

We are currently looking in to having our LabView program process the output of two Allied Vision cameras, run through a PCI GigE card.
On our old machine (32-bit Vista), we have a PRO/1000 PT Quad working just fine with the LabView interface - and we want to upgrade to a better PC with 64-bit Win 7.
We are under the impression that PRO/1000 PT is not compatible with Win 7, and were looking into either I340 quad-port adapters:
http://ark.intel.com/products/49186/Intel-Ethernet-Server-Adapter-I340-T4
Does anyone have any insight as to the compatibilities of the Intel 82580 controllers with LabView 8.6?

Hi Civa,
Scott here from AVT technical support. You are correct re. that PT card not being Win7 compatible. Here's a link to our current recommendations for NICs and switches.
http://www.alliedvisiontec.com/fileadmin/content/PDF/Support/Application_Notes/Hardware_Selection_fo...
If it's NOT in that list, it doesn't mean it won't work, merely that we haven't tested it and do not know. We do not attempt to test every 3rd party product on the market.
And our testing is typical with AVT SDKs not with Labview, though there are thousands of joint AVT / NI customers, and we'd have heard by now if there were any conflicts, I am confident.
Regards,
Scott

Need Sound Card Compatible With Intel D975XBX Mobo and Windows 7

Did a search and no joy. I built a home theater computer about 5 years ago around the D975XBX,? I was using the Sigmatel integrated sound via toslink to my receiver without any problems. I installed W7 yesterday only to find that there are no Intel mobo drivers for W7. So before I go throught he hassle and expense of replacing the mobo and processor, are there any sound cards that are compatible with this mobo and W7? I don't do gaming on this machine, or 3D, mainly 5. out to my receiver. Thanks.
Tim?

DWell, I'll answer my own question. Finding it very hard to belei've that a driver wasn't available for the Sigmatel, I upgraded the Bios, then did another seach. Cha-ching, money!
I really like SB cards, but I don't like spending money when I don't have to.
Even though Intel said it stopped supporting?the mono?in '08, the bios was an '09 version. This may be helpful to others who are using this mobo.

Where can I download Christmas generators / title cards compatible with Final Cut Pro X?

I'm looking for title cards with holiday themes, snow, Christams trees, ornaments and the like. Where can I find these? A quick search online I found site that said they weren't compatible with Final Cut Pro X.
I went to rippletraining.com and after downloading got this error message...and yet I am unable to find any applications in the App store that meet my needs.

kristydrums wrote:
Okay, this seems out of my league! …
you haven't tried!
you managed to handle FCPX, a highly professional edit-tool.
What I suggested, is just 'basics':
compose a few elements.
Get inspired by other videos you notice around.
To animate 'elements', use keyframes.
To apply 'overlays', green-screen/color-key is a basic procedure…
To prep stills, a designated pic-processor is of fundamental need… although, even MacOS built-in Preview.app allows creation of 'knock-outs'/transparency… in case, you're shy to invest a few $$ for Pixelmator.
It looks maybe complicated - it isn't!
Don't try it first time for some serious projcect… but creating your very own Xmas-scenery is a lot of fun… plus, you learn a lot about FCPX and its many hidden gems…
Final word:
Catch some nice, own pics with your cam! … snowy trees, 4 candles and some cookies, a frozen window, illuminations in the streets, that crazy neighbour with his 50.000Watts of garden decorations .... Just add a charming title - done. Simplicity rules! …
Merry Chistmas!

Sandisk's 16gb micro sd card compatible?

Hi,
Here is the link of the item:
http://cgi.ebay.ca/Sandisk-16GB-Micro-SD-SDHC-MicroSD-Memory-Card-16-GB-TF_W0QQitemZ130314550455QQcm...
I want to know if this micro device is compatible with the BB curve 8900. It says on the box of the BB that it's compatible with micro sd and in its description that its compatible with a card up to 16gb of memory.
So... Yes or no? I'm not sure b/c the seller isn't sure, he just told me to check out with my manufacturer.
Regards,
A.R
Solved!
Go to Solution.

Hey,
Don't be upset with seller's comment!!
From your device go to Options -> About...you'll find your device's OS version. Now match that OS version with the below table -
BlackBerry Device Software version
Media card size limit
BlackBerry Device Software 4.2.0
Up to 2 GB
BlackBerry Device Software 4.2.1
Up to 4 GB
BlackBerry Device Software 4.2.2
Up to 4 GB
BlackBerry Device Software 4.3.0
Up to 8 GB
BlackBerry Device Software 4.5.0
Up to 8 GB
BlackBerry Device Software 4.5.0.81 and later
Up to 16 GB
BlackBerry Device Software 4.6.0 and later
Up to 32 GB
By the way all 8900 devices hit the market with OS version 4.6.0 and above....meaning your device will accept media card upto 32GB.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Does PCI Express Video Card compatible on a MSI KM4M Motherboard

Does a PCI Express NVDIA Video Card (8500GT 512MB/128Bit/DDR2) compatible on a MSI KM4M Series Motherboard (System Model: KM400-8235)?
Is it possible to setup the PCI Express NVDIA Video Card on the MSI Motherboard PCI Bus Slot?
Thanks for any response.

Quote from: saijin on 11-January-10, 10:44:44
Maybe this is a dumb question..
There's no way a PCI-e card will work on that board. AGP yes, PCI yes, PCI-e no.

Are any Bluetooth PCMCIA cards compatible?

I am wanting to get a bluetooth mouse for my wife's G4 Titanium Powerbook, and I would prefer not having to use a USB dongle due to the flap having to be open on the back.
Are there any PCMCIA Bluetooth adapters that are OSX compatible?

also, version 3.0 of that 3com card is the only one that will work in Mac OSX, and even then you have to download a special driver called CardBluesSuite. any other version isn't going to work out for you, and forget about using the rebranded HP one. the card is impossible to find. i personally haven't seen one on eBay for quite some time!

RME card - compatible?

Similar Messages

Maybe you are looking for