RME Out of Sync Partially Successfull

We recently upgraded to LMS 3.2 from 2.6, RME is reporting some devices as out of sync and details are partially successfull failing to fetch the vlan.dat. I've checked device credentials.
Here is a a snapshot of the device details from one of the devices.
Protocol ==> SSH
Selected Protocols with order ==> SSH,Telnet,TFTP,RCP
Execution Result:
RUNNING
Primary Login Succeeded
/ Primary Enable Succeeded
CM0060 PRIMARY RUNNING Config fetch SUCCESS for , version number 11 archived.
VLAN
CM0151 VLAN RUNNING Config fetch failed for Cause: Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory.Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory.
VLAN Config fetch is not supported using TFTP.
VLAN Config fetch is not supported using RCP.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
What I find strange is 'Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory.Couldnot create file in C:\PROGRA~1\CISCOS~1\UPGRAD~1 directory'. We installed LMS in it's own directory under C:\ciscoworks\cscopx so why do only a few devices that fail look like they are pointing to the program files directory and is that the true cause ? Incidently there is a folder in there as we installed another cisco tool for upgrading access points, but I have no idea why RME wants to point there ?

I uninstalled the upgrade tool wanting to see if the error msg changed and it did.....
Now it reports "CM0151 VLAN RUNNING Config fetch failed for 142.99.56.75 Cause: Couldnot create file in N/A directory.Couldnot create file in N/A directory."...
I've attached the regdaemon.xml you requested.

Similar Messages

RME out-of-sync summary

Hi there experts,
so someone have an idea to get the out-of-sync summary from the RME in cisco works in an email (pdf eg.)?
Well i thought to find an job to do so but well i think i am blind ...
thx 4 feedback
Rob

Hi Robert,
Unfortunately, there is no such way to get the info in email or pdf format at the moment.
Many Thanks,
Gaganjeet

Final Export of a Project Slightly Out Of Sync

Hi there,
I'm trying to find an answer to what seems to be a common issue when exporting projects out of Final Cut Pro X, however I haven't yet found any answers that work or that tell me things I don't already know (don't mean to sound know-it-all though).
The issue is that after I have exported my project, the audio and video are out of sync. It doesn't drift as the video goes on; it's out of sync by the same amount from start to end. Of course, when editing and viewing the project in Final Cut, the sync is fine.
The project was created from scratch with the Apple ProRes 422 setting, the two original camera angles were both 25p, the audio I'm using is 48K/24bit which the project is setup as also. The audio was originally recorded at 48k/24bit and mixed seperately in Pro Tools and was exported as a wave file (48K/24bit) and brought back into Final Cut.
I can't think of what else to describe. All the project settings and the original footage and audio setting are exactly matched. There's no frame rate changes, no audio resolution changes, no MP3 in the mix, no apparent issue when viewing/editiing in the project, and I even tried optimising the video and exporting just to see if that made any difference.
I usually listen to the audio via an RME souncard which is setup to be low latency. However, whether I view the project and then export via the external audio interface, or view the project and export via the laptop speakers (with not extrernal audio interface connected) it's the same result: slightly out of sync video!
If anyone has any ideas I would be most grateful.
Cheers,
Chris

Hey Russ,
Thanks for your time. When I say a 'common issue' I found that when I searched it both on Google as well as this support forum I found multiple threads and questions pertaining to this issue of sync and/or drift.
I tested this single angle idea by using the footage in a nother project and exporting part of that (without changing angles) and it seemed to be OK. However I have other projects which are only single angle but they export slightly out of sync as well. I haven't found a common denominator yet.
When I say out of sync, it's not dramatic, however it's always the same - the audio is just a few frames behind the video. This has happened with most of my projects using different footage and different audio, etc. No matter what setting audio and video are recorded at, and regardless of whether I dramaticallty colourise or add effects to the video or not, it's always the same result; slightly behind audio when exported.
With regard to presets, do you meet export settings? If so, I'm mostly exporting using H.264 and as a Quicktime Move (AAC) output. I've tried various resolution changes and tinkering but nothing has changed.
If you're referring to project setup presets, I can't really change too many things because obviously the audio resolution and video frame rates are predetermined so I can't try 25p footage in a 30p project, etc.
Thanks again,
Chris

Allways device out-of-sync

Hello
I allways have out-of-sync device.
I Have LMS3.2 with RME 4.3.1
Although, I configured "exclude command" with "ntp-clock priod .certificate. and so on." for the dev category "switch and hub".
But when I click "out of sync" it allways shows me the device ( SW 2950..SW3560 .) with difference like ntp-clock.
This happens also after a new config ftech.
Can you help me .
Rgards
Michel Misonne

Hello Jo
Here is my screenshot.
I noticed also that the device which are allways out-of-sync are 3560V2.
If I checked the device pakage , I have the package "Cat3560" ver 7.1
Rgds
Michel

Audio out of sync with elemental plugin, and slower than my i7!!!

Maaannn!!
I just got a PNY nvidia quadro 1800 with elemental accellerator plugin. I just transcoded 2 hours of HDV straight from premiere 4 with Adobe Media Encoder using the Elemental codec and the audio is out of sync. It plays out of sync on the Blu Ray disk, and in Encore4. The audio is perfectly synced in Premiere. I just did another project a week ago without the Elemental, using the default Main Concept encoder and the audio is perfect. I am pretty sure I have the latest version of the Elemental Accellerator because there is a button to check for updates and it says there are no updates available. Does anybody know what is wrong here?.
The transitions are getting messed up. I can see a small section with the audio synced, then the video repeats after a second throwing them out of sync. I also suspect that the Elemental accelerator does not process any faster than the default h.264 for Blu Ray encoder. I hope I did not waste my money on this nvidia quadro 1800..
Whoooaa! I just woke up and checked the transcoding time.. To transcode approximately 2 hours of HDV it took 6:35 (hr:mm) with the elemental accellerator and it took 5:09 with my i7 920 chip!! Was that nvidia card a waste of money, or what?!!! Between the slower speed and the audio out of sync, I'd say I made a BIG misteak.. Does anybody want to buy a PNY nvidia quadro 1800? it'll be on ebay very soon..
Win7 64bit, Master Collection 4, i7 2.66 Ghz, Kingston Triple Channel DDR3 1600Mhz 6Gb, ASUS P6T, PNY nvidia quadro 1800.....

Thanks Neil,
I don't think my audio interface has anything to do with it.. I am using Adobe Media Encoder for the export and the Audio interface's latency has nothing to do with it.. I see the source of the problem but not the solution.. The Elemental plugin is not working properly with the transitions in Premiere. The transitions are visibly botched and the sound is in sync for a partial second of each clip, then the video skips backward as the sound keeps playing. This happens on every clip after the transition.
Whatever you were talking about might have to do with some kind of real time export, but to where? I think Premiere might have some auto plugin delay compensation for audio tracks.. I dont think you even read my post.. My MOTU 896 Mk3 audio interface has a 128 sample buffer leaving a few milliseconds of latency, and I can set it as low as 64.. This still has nothing to do with my problem.. Thanks for your input..
I am curious to know what you thought I was capturing elemental streams and audio from my interface in real time to.. I was unaware of anything that works like that in this type of editing..
The bottom line is that my i7 chip gets the job done much faster than the quadro 1800, and that's a shame that I spent the money on the 1800.. On top of that it doesn't even work properly!!

When audio goes out of sync..

In FCP7, when audio goes out of sync with the video track it came from (even when they are unlinked), a red warning box is displayed on the audio track and tells you how far out of sync it is, which easily enables you to resync.
Well, in FCX my audio went out of synce, but i didn't know it until i played back a segment i was working on, where i spliced two audio tracks and video tracks together. Right now i'm trying to fix the one audio track so that is synced up with its parent video track, but so far i'm just guessing that it's a good sync rather than knowing FOR SURE whether or not it's truly synced back up.
Is there any kind of work around, which enables you to resync in a manner similar to before FCPX?
Thanks

I am not sure if your problem has been solved already but here is the way to do that:
select in the clip in the timeline the part were the audio should be return in sync. use the blade-tool to make that part a seperate clip.
Higlight this clip in the timeline and use shift-F to highlight this clip in the browser. There it wil show up partially of course.
Use only the audio and put that part under the selected clip in the timeline where you need the original audio. remove the original out-of-sync audio.

Audio out of sync

I have 2 Xl2s. Both running at the same time taping a performance. One is using tape, the other a HD recorder. When I do the capture of both streams, I am unable to sync the audio and video. Something I have done many times before with other cameras. The offending capture is the one that came from tape.
I am shooting 60i, 16:9, standard 16 bit audio, everything default. The weird thing is is that the audio is out of sync for its own video clip! And it seems to get futher out of sync the farther in the clip I play.
I imported as DV 3x2 anamorphic using a Sony DSR 11 deck.
Is my camera tweaked?

Read the bit at the end about unlocked audio.
http://www.cyberfilmschool.com/learn/article_detail.aspx?id=96
This article claims FCP has a switch to deal with the 48 KHz vs 48.009 KHz. I don't know it.
http://www.chip-india.com/dcquery.php?qid=9360
and more good information here...
http://www.geniusdv.com/avid-fcp//read.php?1,1737,2024
There are kluge work arounds, but they are not ideal. When I have to deal with this stuff I keep my captures short, which doesn't seem to be an option for you.
Another trick is the change the speed of the audio very slightly to compensate for the drift.
I hope all this helps. I was burned by this with a project four years ago, so I know how frustrating it is.
Tom

Audio out of sync when playing HD content

Hey
I've got an issue with the audio gets out of sync when playing some HD content. I've tried to make sure the video is stored on the Apple TV so it can't be the network connection.
I've also tried a full reset of the unit, but still no luck.
But it's all video clips that has this problem. Even though they encoded the same and so on, some videos audio get out of synced and some don't.
Also have a problem with m4v files locking the ATV (and iTunes for that matter), but renaming it to a mp4 file seems to solve it. But if someone has a fix for that as well I'd much appreciate it.
Many thanks in advance,
Jeaz
EDIT: I have tried to use component cables instead of HDMI, but the problem remains. Of course also tested the video on my Mac and no problems. A quick pause and resume usually solves it, but only for a minute or so.
Message was edited by: MrJeaz

What sort of specification is the video content? Is spec too high for AppleTV.
It may be that it's some kind of bug in AppleTV's playback, that the Mac does not exhibit, or an issue with encoding that causes a problem only on AppleTV.
If you are encoding video and using same as source for the frame rate, it may be better in some cases trying explicitly to specify the frame rate required in case automatic frame rate conversion is introducing some kind of timing issue. Test a short clip to see.

MPEG4 video from imovie is sluggish and audio out of sync

Hi y'all,
I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
The Camera I used is a Sony FX7 HD camera with SD tape.
So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
However, here are the challenges I am having:
1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
The video is choppy as well.
Details: source video is 720x480 and trying to export to 320x240
My project details are:
DV-NTSC standard 48khz
Video is 10 min long

OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
Next, you can Render your Timeline, to get things as smooth as possible.
Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
Good luck,
Hunt

Audio out of sync with video in timeline SOLVED

The audio and video are in sync when playing .MP4 video (but may apply to other video files) in the Premiere Pro viewer and Windows Media Player and VLC however, as soon as you drag the clip into the timeline it goes out of sync. Since it took so much time for me to figure out how to get around this problem I wanted to share this, ESPECIALLY For all the people who are semi Adobe Premiere noobs (with no disrespect, I fall into this category) at this and google isn't helping to figure out why this is happening I'll give you the easy fix. For all the people in this forum who are going to ask the detailed information, codecs, etc. I'll give that as well.
FOR THE NOOBS:
All the information I've read online all seems to point that the timeline sometimes doesn't like certain audio contained in the video. It conforms incorrectly, etc. Personally, it doesn't make any sense to me. Forget all that.. you just want to get on with your project.. to heck with the details, you're tired of googling. Here's the solution I found. Extracting the audio from the problematic video file outside of Adobe Premiere. I use avconv, because it's free, open source, and you won't lose audio quality. Then linking that audio with the video in Adobe Premiere.
First if you are using a windows 32 bit computer download avconv here: http://win32.libav.org/win32/
If you are using a windows 64 bit computer download avconv here: http://win32.libav.org/win64/
go to the bottom of the page and click on the newest date version. DISCLAIMER: This is open source software. It's free. I didn't make it so I'm not trying to sell you anything.
It's a zip file so you will need to use winzip or 7zip to uncompress it. You can't just click on the installer. You can uncompress and save the program wherever you want on your computer. Say you didn't pay attention and you automatically saved it in the default spot in your downloads folder. The place you'd find the program might look like this if you're on a 64 bit computer:
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 If you're on a 32 bit computer it will probably look like this C:\Users\youruseraccountname\Downloads\libav-9.7-win32
Just make sure you know where it is located and copy it down in notepad. If you can't find it, do a search on your C: drive for avconv .For this forum thread we will assume you have saved avconv in the downloads folder and you're on a 64 bit computer.
Click on the Windows key on your keyboard. Type in Run and then press enter. Type in CMD and press enter. This will open up windows command line. Don't worry, it's not as scary as you think.
Now hold down the Windows key and press E. This will open up a windows explorer window for you to find the video file you are having issues with in Adobe Premiere. Once you have found the file, copy the location of the file. So.. if your file was here: c:\Users\youruseraccount\videos\yourvideo.mp4 you would see that at the top of the windows explorer in what's called the address bar. Copy that. Paste it into your notepad.
Now switch back to the windows command line window. Now I'm going to have you type a command into the windows command line but before you do I want you to understand how to type it in.
#1. Do you know the exact path (location on your computer) where you installed avconv?
#2. Did you copy the exact path (location on your computer) where you have your video file?
If so.. type in the command below but change it with the information you have above
C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe -i "c:\Users\youruseraccount\videos\yourvideo.mp4" -vn -qscale 1 "c:\Users\youruseraccount\videos\yourvideo.wav"
So let's break it down so you understand and help troubleshoot any issues you may have.
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 this is the example location we said we installed avconv. The actual avconv.exe program is located inside that folder so the full path would be this: C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe
-i just tells avconv what the input file is.
"c:\Users\youruseraccount\videos\yourvideo.mp4" is the path (location on your computer) where your video file is.
-vn just tells avconv you only want to extract audio from the video
-qscale 1 just tells avconv you want the best quality
"c:\Users\youruseraccount\videos\yourvideo.wav" just tells avconv the path (location on your computer) and the name you want to give the audio file you're taking from the video. This will save the audio wav file to the path (location on your computer) where the problematic video file is saved.
Once you have the audio wav file import it into Adobe Premiere. In the timeline, unlink the audio from the mp4 (or whatever video file you have). Highlight the now unlinked mp4 audio and delete the audio. Then bring your audio wav file you created using avconv and bring it onto the timeline at the start of the video. Now link it. Hopefully that did the trick.
If you have any questions regarding the command line or installing avconv please feel free to comment and ask. I'm pretty good at windows command line and can probably help identify what the issue is.
FOR THE INFORMED PREMIERE PRO USERS:
Here are the details of the problematic video file that I had this issue with. This is from avconv:
Metadata:
    major_brand     : mp42
    minor_version   : 1
    compatible_brands: mp42mp41
    creation_time   : 2013-05-12 11:45:32
Duration: 01:58:28.24, start: 0.000000, bitrate: 3256 kb/s
    Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720, 2997 kb/s, 25 fps, 25 tbr, 25 tbn
    Metadata:
      creation_time   : 2013-05-12 11:45:32
    Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, fltp, 256 kb/s
    Metadata:
      creation_time   : 2013-05-12 11:45:32
I don't know the type make/model video camera that was used or if it was converted before being given to me. This is just what i had to work with and the solution I found to fix it.

if you are using a windows 32 bit computer
Then you won't be using anything above Premiere Pro CS4, and this thread would be in the wrong section.
By the way, the process is significantly easier using something like Xvid4PSP, which can strip out the audio using a fairly easy to understand GUI, as wel as convert those oddball videos into something PP can handle.
http://www.videohelp.com/tools/XviD4PSP (Use version 5.)

Jabber for Windows and Unity Connection Voice mail out of sync

Hello all,
Now that Jabber is pretty much part of every install you begin to notice some trends. One trend that I have noticed happening across several of customers is complaints about Jabber and the Voicemail server getting out of sync. It’s never really been a wide spread issue but it has be noticed by several of my customers enough so that I’m reaching out to see if others are experiencing the same problem. Here are the symptoms, a person sitting at their desk they have a physical phone, and a windows PC running Jabber 4 Windows. They miss a call and the MWI lamp gets lit on the phone but not on Jabber. When you click on HELP / Show Connection status, you see all green checks, and Voicemail shows connected from Jabbers standpoint. When you exit the application and come back in, then it sync’s back up just fine. I have never seen it happen myself, but to be honest I’m never at my desk enough to even notice if my phone lamp is lit.
Anyway has anyone had similar issues? If so is there a fix?

Symptom:
User logged in Jabber and do not log-off/sign-out for more than 24 hours and then jabber does not receive new voicemails from Unity Connection. User will be able to receive voicemails from other interfaces like Outlook, TUI but voicemails will not show up in Jabber.
Conditions:
User does not sign out from jabber for more than 24 hours since last log on.
Workaround:
Sign out from jabber at-least once a day and sign-in back so that subscription will not expire in Unity Connection database.
Voicemail does not sync if Jabber left logged in for more than 24 hours
CSCuo46274
Can be fixed, depends on releases, TAC offered me a fix in version 10.5(1)ES29

Out of sync audio when trying to capture from digital 8 camera to quicktime, please help

Just trying to capture hi 8 tapes using a sony digital 8 dcr-trv355e pal into quicktime;
great clear video but audio becomes out of sync like a bad kungfu movie,
contacted apple they tried to help, but they dont really understand issue
there are lots of people out there that are trying to digitise old analog video;
I have fcpx and imovie they both play the old video via the digital 8 camera but cannot capture;
that is why using quicktime; thanks!!

Yes i think its something to do ith the fact its a wmv file, when i use mpeg footage it exports fine.
basically, no matter how long the video, the video is out of sync...its weird
i've decided the best thing to do is leave quicktime and export using windows media instead, that seems to give me a better looking picture witha small file size anyway
thanks for your help though!

Flash Player doesn't play smoothly and out of sync in full screen

Hello! Everyone
The flash player (11.2.202.235) does not play smoothly and in full screen audio and vidoe is out of sync. I didn't use to have any problem at all, it only started about two weeks ago and since then despite trying various things (i.e. disabling hardware excelration, uninstalling & reinstalling, trying various browsers etc.) has not resolved the issue. I don't know why it has suddenly stopped playing smoothly as I have not installed any software recently which might have cuased this.
I am using Windows XP (service pack3) and have dual partion with dual operating system (both XP). There is the same problem on both operarting system and flash player won't run smoothly on either of them. Although my computer and graphics card is quite old but the downloaded movies/DVD playback is fine even in full screen. It runs smoothly and audio&video is in sync so I don't think it could my the graphics card.
As I mentioned I have tried all the browsers but without any luck. The BBC iplayer plays ok most of the time if not in full screen but as soon as you make it full screen the vidoe is more like a slide show and very jittery and audio&video gets out of sync. Same with youtube vidoes, they play ok when not in full screen but the video in full screen does not play smoothly and audio&vidoes gets out of sync. However the ITV player & Channel 4 content on 4OD does not even play smoothly when not in full screen and the video&audio is out of sync all the time.
It would be really helpful if anyone can suggest anything to resolve this issue as I have not been able to find anything on the internet to solve the problem and its driving me up the wall. Although I have tried to include as much details as I could think of so please let me know if I have missed any details that could be crucial in order to identify the problem.
Thank you very much for reading this and taking the time to reply and your feedback.
Below is the DxDiag report for my laptop:
Time of this report: 4/22/2012, 00:15:58
Machine name: TIMES-LAPTOP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: TimeComputers
System Model: VT8372
BIOS: Insyde Software MobilePRO BIOS Version 4.00.01
Processor: mobile AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 1248MB RAM
Page File: 809MB used, 2790MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904) DX
Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------ DxDiag Notes ------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
-------------------- DirectX Debug Levels --------------------
Direct3D:    0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
--------------- Display Devices ---------------
Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics Co., Ltd.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_83751071&REV_00
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768)   Monitor Max Res:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0025 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/2/2004 14:02:26, 402048 bytes
WHQL Logo'd: Yes   WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/2/2004 14:02:30, 167040 bytes
Device Identifier: {D7B75DD3-CE44-11CF-D873-7FA3A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x83751071
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_A ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled DDraw
Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------- Sound Devices -------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_83751071&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 48000 Static/Strm
HW Mix Bufs: 1, 0 Static/Strm
HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No EAX(tm) 2.0
Listen/Src: No, No    I3DL2(tm)
Listen/Src: No, No Sensaura(tm)
ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
--------------------- Sound Capture Devices ---------------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
----------- DirectMusic -----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Vinyl AC'97 Audio (WAVE), Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: Not run
------------------- DirectInput Devices -------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
----------- USB Devices -----------
+ USB Root Hub |
Vendor/Product ID: 0x1106, 0x3038 |
Matching Device ID: usb\root_hub |
Service: usbhub |
Driver: usbhub.sys, 4/13/2008 19:45:37, 59520 bytes |
Driver: usbd.sys, 8/23/2001 13:00:00, 4736 bytes

Would you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris

HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

10.6 iCal week view and mini calendar are out of sync-how to fix?

How does one re-establish "sync" between the large window week view and the small mini calendar month view displayed on the lower left side? Mine is out of sync by a month. Thanks!

Are they off by always the same amount of time or they drift apart over time?
If the former, you may try a quick adjustment, though it is a manual affair. Control-click on the clip in the browser, choose "Open in Timeline" and try moving the audio to match.
If I remember correctly, DV tape audio could be recorded in 32KHz or 48KHz. The latter is the one that should be used, always.
Maybe this one was recorded at 32KHz?

RME Out of Sync Partially Successfull

Similar Messages

Maybe you are looking for