RME unable to telnet to devices presenting "username:" prompt

In the network of my latest LMS 3.2 installation a  lot of the devices is presenting a telnet prompt with a lowercase "u" in username. This seems to cause the RME to not be able to login to the devices. I remember from earlier that it was possible to edit a file on the LMS server to decide which prompts were acceptable. Does anyone know if this still is possible or how to solve this problem?

Many thanks for your input, it solved my problem
Do you also know what to do if there are several different prompts presented? Just add lines of USERNAME_PROMPT= in the file?

Similar Messages

  • Firewire problem (the old 'Warning: unable to list firewire devices')

    Hello everyone,
    I am having a very big problem with my 13" Macbook Pro since yesterday. I took it to work and hooked it to a RME Fireface 800 audio interface we have in there, and for some odd reason it didn't recognize the interface. After a few tries, it suddenly came alive. I did the recording session as usual, turned the notebook off and brought everything home. Today, I hooked it to my own RME Fireface 400, and one of the firewire ports on it wasn't working - I plugged on the other and started audio playback. After a few minutes, the audio stopped and the host connection problem led the Fireface has turned on. AFter this, I couldn't get the fireface to be recognize on its own - more on this later.
    I went to system profiler and got a 'WARNING: Unable to list firewire devices' message. I already googled it and it seems I am not the only own having this problem. I already clean PRAM, SMC, ran disk utility to repair disk and disk permissions and nothing has worked. HOWEVER, one external HD (firewire) i have is working just fine on this same firewire interface. I also tried daisy chaining the Fireface to the Hard disk, the later being connected itself to the Macbook, and using this method the interface works. I also tried the interface on another computer and it works just fine - so the problem lies on my Macbook Pro.
    Now, I went to the Console application to see if there was any error messages, and in fact there are plenty. I got a bunch of 'FireWire (OHCI) Lucent ID 5901 built-in: Bad selfIDs, issuing bus reset (retry 2)' and then 'Missing self ID for node 0!'. Also got some 'Firewire (OHCI) Lucent ID 5901 built-in: 4403 resets in last 3 minutes'. Also 'SPFWR ERROR: Firewire bus may be unstable. Other Firewire devices may be present.'. Right now, If i plug the interface and look for something on the console, I get nothing. I only get something when I look on the System Profiler.
    So, obviously, there's a problem between my interface and the MBP. Anyone has ANY clue on what to do? BTW, the interface don't work when booting to bootcamp using W7 (it is also not recognized).But like I said, it works when daisy-chained to the hard disk or in another computer.
    Thanks a lot,
    Ivan

    Does the RME device have its own AC power supply brick? If so I would suspect that it is failing and the system is pulling too much juice from the MBP. When you have a drive daisy-chained the interface is able to get the juice it needs from that drive and not from the Mac itself.
    If it has no power supply brick you will have better luck with a powered hub.

  • [Solved] Unable to find root device

    Hi guys,
    it's been three days now that my laptop refuses to boot with a message from systemd like this:
    ERROR: device 'UUID=xxx...' not found. Skipping fsck.
    ERROR: Unable to find root device 'UUID=xxx...'.
    You are being dropped to a recovery shell.
    That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
    But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
    I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
    In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
    It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
    However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
    [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
    [ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
    [ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
    [ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] log_buf_len: 1048576 bytes
    [ 0.000000] early log buf free: 519600(99%)
    [ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
    [ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
    [ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
    [ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
    [ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
    [ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21edfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
    [ 0.000000] On node 0 totalpages: 1997309
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12786 pages used for memmap
    [ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18360 pages used for memmap
    [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2593.984 MHz processor
    [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
    [ 0.000028] pid_max: default: 32768 minimum: 301
    [ 0.000032] ACPI: Core revision 20140926
    [ 0.020437] ACPI: All ACPI Tables successfully acquired
    [ 0.021107] Security Framework initialized
    [ 0.021114] Yama: becoming mindful.
    [ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024297] Initializing cgroup subsys memory
    [ 0.024302] Initializing cgroup subsys devices
    [ 0.024304] Initializing cgroup subsys freezer
    [ 0.024305] Initializing cgroup subsys net_cls
    [ 0.024307] Initializing cgroup subsys blkio
    [ 0.024325] CPU: Physical Processor ID: 0
    [ 0.024326] CPU: Processor Core ID: 0
    [ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025227] mce: CPU supports 7 MCE banks
    [ 0.025238] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.026009] ftrace: allocating 20921 entries in 82 pages
    [ 0.033432] dmar: Host address width 39
    [ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
    [ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
    [ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
    [ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.033572] HPET id 0 under DRHD base 0xfed91000
    [ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
    [ 0.033573] This will slightly decrease performance.
    [ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
    [ 0.033713] Enabled IRQ remapping in xapic mode
    [ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
    [ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
    [ 0.067366] TSC deadline timer enabled
    [ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067404] ... version: 3
    [ 0.067405] ... bit width: 48
    [ 0.067406] ... generic registers: 4
    [ 0.067407] ... value mask: 0000ffffffffffff
    [ 0.067407] ... max period: 0000ffffffffffff
    [ 0.067408] ... fixed-purpose events: 3
    [ 0.067409] ... event mask: 000000070000000f
    [ 0.090846] x86: Booting SMP configuration:
    [ 0.090848] .... node #0, CPUs: #1
    [ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.111723] #2 #3
    [ 0.146545] x86: Booted up 1 node, 4 CPUs
    [ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
    [ 0.149839] devtmpfs: initialized
    [ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
    [ 0.152488] pinctrl core: initialized pinctrl subsystem
    [ 0.152525] RTC time: 14:27:35, date: 01/29/15
    [ 0.152613] NET: Registered protocol family 16
    [ 0.163220] cpuidle: using governor ladder
    [ 0.176565] cpuidle: using governor menu
    [ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.176606] ACPI: bus type PCI registered
    [ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.176776] PCI: Using configuration type 1 for base access
    [ 0.176783] dmi type 0xB1 record - unknown flag
    [ 0.190254] ACPI: Added _OSI(Module Device)
    [ 0.190257] ACPI: Added _OSI(Processor Device)
    [ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
    [ 0.527048] ACPI: Dynamic OEM Table Load:
    [ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
    [ 0.540534] ACPI: Dynamic OEM Table Load:
    [ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
    [ 0.553725] ACPI: Dynamic OEM Table Load:
    [ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
    [ 0.607146] ACPI: Interpreter enabled
    [ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.607184] ACPI: (supports S0 S3 S4 S5)
    [ 0.607185] ACPI: Using IOAPIC for interrupt routing
    [ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.608649] ACPI: Power Resource [PG00] (on)
    [ 0.620317] ACPI: Power Resource [PG01] (on)
    [ 0.640702] ACPI: Power Resource [PG02] (on)
    [ 1.401836] ACPI: Power Resource [FN00] (off)
    [ 1.401913] ACPI: Power Resource [FN01] (off)
    [ 1.401986] ACPI: Power Resource [FN02] (off)
    [ 1.402057] ACPI: Power Resource [FN03] (off)
    [ 1.402127] ACPI: Power Resource [FN04] (off)
    [ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 1.404193] PCI host bridge to bus 0000:00
    [ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
    [ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
    [ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
    [ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
    [ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
    [ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
    [ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
    [ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
    [ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
    [ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
    [ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
    [ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
    [ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
    [ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
    [ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
    [ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
    [ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
    [ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
    [ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
    [ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
    [ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
    [ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
    [ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.614019] vgaarb: loaded
    [ 1.614020] vgaarb: bridge control possible 0000:00:02.0
    [ 1.614099] PCI: Using ACPI for IRQ routing
    [ 1.615308] PCI: pci_cache_line_size set to 64 bytes
    [ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
    [ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
    [ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
    [ 1.615428] NetLabel: Initializing
    [ 1.615429] NetLabel: domain hash size = 128
    [ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.615438] NetLabel: unlabeled traffic allowed by default
    [ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.617497] Switched to clocksource hpet
    [ 1.621576] pnp: PnP ACPI init
    [ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 1.621755] system 00:00: [io 0xffff] has been reserved
    [ 1.621756] system 00:00: [io 0xffff] has been reserved
    [ 1.621758] system 00:00: [io 0xffff] has been reserved
    [ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
    [ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
    [ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.001167] pnp: PnP ACPI: found 8 devices
    [ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
    [ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 2.007594] NET: Registered protocol family 2
    [ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
    [ 2.008100] TCP: reno registered
    [ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008195] NET: Registered protocol family 1
    [ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
    [ 2.024532] PCI: CLS 64 bytes, default 64
    [ 2.024577] Unpacking initramfs...
    [ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
    [ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
    [ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.341843] Scanning for low memory corruption every 60 seconds
    [ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 2.342061] Initialise system trusted keyring
    [ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.343277] zpool: loaded
    [ 2.343280] zbud: loaded
    [ 2.343434] VFS: Disk quotas dquot_6.5.2
    [ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.343557] msgmni has been set to 15200
    [ 2.343599] Key type big_key registered
    [ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.343779] io scheduler noop registered
    [ 2.343781] io scheduler deadline registered
    [ 2.343802] io scheduler cfq registered (default)
    [ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
    [ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.344363] vesafb: scrolling: redraw
    [ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
    [ 2.492136] Console: switching to colour frame buffer device 240x67
    [ 2.639261] fb0: VESA VGA frame buffer device
    [ 2.639278] intel_idle: MWAIT substates: 0x11142120
    [ 2.639279] intel_idle: v0.4 model 0x45
    [ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.639471] GHES: HEST is not enabled!
    [ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.639854] Linux agpgart interface v0.103
    [ 2.639890] rtc_cmos 00:01: RTC can wake from S4
    [ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.640037] Intel P-state driver initializing.
    [ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
    [ 2.640415] TCP: cubic registered
    [ 2.640635] NET: Registered protocol family 10
    [ 2.641104] NET: Registered protocol family 17
    [ 2.641809] Loading compiled-in X.509 certificates
    [ 2.641841] registered taskstats version 1
    [ 2.642839] Magic number: 15:558:486
    [ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
    [ 2.643157] PM: Hibernation image not present or could not be loaded.
    [ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 2.645137] Write protecting the kernel read-only data: 8192k
    [ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
    [ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
    [ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
    [ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
    [ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
    [ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
    [ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
    [ 2.657455] systemd-udevd[61]: starting version 218
    [ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
    [ 2.657510] systemd-udevd[61]: Load module index
    [ 2.657562] systemd-udevd[61]: Created link configuration context.
    [ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
    [ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
    [ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
    [ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    [ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    [ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    [ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    [ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    [ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    [ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
    [ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    [ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
    [ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
    [ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
    [ 2.658188] systemd-udevd[61]: Unload module index
    [ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
    [ 2.658262] systemd-udevd[62]: set children_max to 16
    [ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
    [ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
    [ 2.660575] systemd-udevd[67]: seq 678 running
    [ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
    [ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.660651] systemd-udevd[67]: seq 678 processed with 0
    [ 2.714860] raid6: sse2x1 9342 MB/s
    [ 2.771561] raid6: sse2x2 11848 MB/s
    [ 2.828260] raid6: sse2x4 13887 MB/s
    [ 2.884943] raid6: avx2x1 18356 MB/s
    [ 2.941655] raid6: avx2x2 21230 MB/s
    [ 2.998344] raid6: avx2x4 24583 MB/s
    [ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
    [ 2.998346] raid6: using avx2x2 recovery algorithm
    [ 2.998547] xor: automatically using best checksumming function:
    [ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
    [ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 2.998639] systemd-udevd[67]: seq 679 running
    [ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
    [ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.998684] systemd-udevd[67]: seq 679 processed with 0
    [ 3.031698] avx : 25444.800 MB/sec
    [ 3.034144] systemd-udevd[62]: Validate module index
    [ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
    [ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
    [ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034249] systemd-udevd[67]: seq 680 running
    [ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
    [ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034308] systemd-udevd[67]: seq 680 processed with 0
    [ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
    [ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034945] systemd-udevd[67]: seq 681 running
    [ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
    [ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034986] systemd-udevd[67]: seq 681 processed with 0
    [ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
    [ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035087] systemd-udevd[67]: seq 682 running
    [ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
    [ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035118] systemd-udevd[67]: seq 682 processed with 0
    [ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
    [ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035790] systemd-udevd[67]: seq 683 running
    [ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
    [ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
    [ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035834] systemd-udevd[67]: seq 683 processed with 0
    [ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
    [ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
    [ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035961] systemd-udevd[67]: seq 685 running
    [ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
    [ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
    [ 3.035981] systemd-udevd[75]: seq 684 running
    [ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.036004] systemd-udevd[67]: seq 685 processed with 0
    [ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
    [ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036031] systemd-udevd[75]: seq 684 processed with 0
    [ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
    [ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
    [ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
    [ 3.036165] systemd-udevd[76]: seq 686 running
    [ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036180] systemd-udevd[75]: seq 688 running
    [ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
    [ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
    [ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
    [ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036215] systemd-udevd[75]: seq 688 processed with 0
    [ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036231] systemd-udevd[76]: seq 686 processed with 0
    [ 3.036257] Btrfs loaded
    [ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
    [ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
    [ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
    [ 3.036378] systemd-udevd[77]: seq 689 running
    [ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
    [ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
    [ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036439] systemd-udevd[77]: seq 689 processed with 0
    [ 3.036457] systemd-udevd[76]: seq 691 running
    [ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
    [ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036498] systemd-udevd[76]: seq 691 processed with 0
    [ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
    [ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
    [ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036576] systemd-udevd[76]: seq 693 running
    [ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
    [ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
    [ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
    [ 3.036619] systemd-udevd[76]: seq 693 processed with 0
    [ 3.036637] systemd-udevd[77]: seq 694 running
    [ 3.036649] systemd-udevd[78]: seq 692 running
    [ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
    [ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036676] systemd-udevd[77]: seq 694 processed with 0
    [ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
    [ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.036698] systemd-udevd[78]: seq 692 processed with 0
    [ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
    [ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
    [ 3.036801] systemd-udevd[80]: seq 695 running
    [ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
    [ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.036848] systemd-udevd[80]: seq 695 processed with 0
    [ 3.036859] systemd-udevd[76]: seq 696 running
    [ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
    [ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
    [ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
    [ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
    [ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
    [ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036992] systemd-udevd[76]: seq 696 processed with 0
    [ 3.037009] systemd-udevd[67]: seq 687 running
    [ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
    [ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037048] systemd-udevd[67]: seq 687 processed with 0
    [ 3.037063] systemd-udevd[75]: seq 690 running
    [ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
    [ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.037097] systemd-udevd[75]: seq 690 processed with 0
    [ 3.037372] udevadm[79]: calling: trigger
    [ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
    [ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
    [ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
    [ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
    [ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
    [ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
    [ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
    [ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
    [ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
    [ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
    [ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
    [ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
    [ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
    [ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
    [ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
    [ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
    [ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
    [ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
    [ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
    [ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
    [ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
    [ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
    [ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
    [ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
    [ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
    [ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
    [ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
    [ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
    [ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
    [ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
    [ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
    [ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
    [ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
    [ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
    [ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
    [ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
    [ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
    [ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
    [ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
    [ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
    [ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
    [ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
    [ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
    [ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
    [ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
    [ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
    [ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
    [ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
    [ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
    [ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
    [ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
    [ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
    [ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
    [ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
    [ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
    [ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
    [ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
    [ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
    [ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
    [ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
    [ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
    [ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
    [ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
    [ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
    [ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
    [ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
    [ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
    [ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
    [ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
    [ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
    [ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
    [ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037890] systemd-udevd[67]: seq 697 running
    [ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
    [ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
    [ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
    [ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
    [ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037925] systemd-udevd[67]: seq 697 processed with 0
    [ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
    [ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037988] systemd-udevd[67]: seq 698 running
    [ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
    [ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038015] systemd-udevd[67]: seq 698 processed with 0
    [ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
    [ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038076] systemd-udevd[67]: seq 702 running
    [ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
    [ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
    [ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038106] systemd-udevd[67]: seq 702 processed with 0
    [ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
    [ 3.038113] systemd-udevd[78]: seq 703 running
    [ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
    [ 3.038143] systemd-udevd[80]: seq 704 running
    [ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
    [ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038158] systemd-udevd[78]: seq 703 processed with 0
    [ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
    [ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
    [ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038179] systemd-udevd[80]: seq 704 processed with 0
    [ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038192] systemd-udevd[67]: seq 705 running
    [ 3.038201] systemd-udevd[78]: seq 706 running
    [ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
    [ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
    [ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
    [ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038228] systemd-udevd[67]: seq 705 processed with 0
    [ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
    [ 3.038243] systemd-udevd[80]: seq 707 running
    [ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038246] systemd-udevd[78]: seq 706 processed with 0
    [ 3.038254] systemd-udevd[76]: seq 700 running
    [ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
    [ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038275] systemd-udevd[80]: seq 707 processed with 0
    [ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
    [ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038310] systemd-udevd[76]: seq 700 processed with 0
    [ 3.038325] systemd-udevd[75]: seq 699 running
    [ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
    [ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038364] systemd-udevd[75]: seq 699 processed with 0
    [ 3.038405] systemd-udevd[77]: seq 701 running
    [ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
    [ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038432] systemd-udevd[77]: seq 701 processed with 0
    [ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
    [ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
    [ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038623] systemd-udevd[81]: seq 708 running
    [ 3.038627] systemd-udevd[67]: seq 709 running
    [ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
    [ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
    [ 3.038653] systemd-udevd[75]: seq 710 running
    [ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
    [ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
    [ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
    [ 3.038671] systemd-udevd[67]: seq 709 processed with 0
    [ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
    [ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
    [ 3.038682] systemd-udevd[81]: seq 708 processed with 0
    [ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
    [ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038700] systemd-udevd[75]: seq 710 processed with 0
    [ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
    [ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038734] systemd-udevd[67]: seq 711 running
    [ 3.038753] systemd-udevd[76]: seq 713 running
    [ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
    [ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
    [ 3.038784] systemd-udevd[67]: seq 711 processed with 0
    [ 3.038797] systemd-udevd[75]: seq 712 running
    [ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038803] systemd-udevd[76]: seq 713 processed with 0
    [ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
    [ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038845] systemd-udevd[75]: seq 712 processed with 0
    [ 3.038849] systemd-udevd[77]: seq 714 running
    [ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
    [ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
    [ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038878] systemd-udevd[77]: seq 714 processed with 0
    [ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
    [ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
    [ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
    [ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
    [ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038976] systemd-udevd[75]: seq 719 running
    [ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
    [ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
    [ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
    [ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039004] systemd-udevd[75]: seq 719 processed with 0
    [ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
    [ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
    [ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039070] systemd-udevd[75]: seq 720 running
    [ 3.039078] systemd-udevd[76]: seq 721 running
    [ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
    [ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039094] systemd-udevd[75]: seq 720 processed with 0
    [ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
    [ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.039133] systemd-udevd[76]: seq 721 processed with 0
    [ 3.039146] systemd-udevd[67]: seq 715 running
    [ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
    [ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.039181] systemd-udevd[67]: seq 715 processed with 0
    [ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039224] systemd-udevd[77]: seq 722 running
    [ 3.039235] systemd-udevd[78]: seq 723 running
    [ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
    [ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
    [ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
    [ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.039267] systemd-udevd[77]: seq 722 processed with 0
    [ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.039277] systemd-udevd[78]: seq 723 processed with 0
    [ 3.039284] systemd-udevd[75]: seq 717 running
    [ 3.039288] systemd-udevd[76]: seq 718 running
    [ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
    [ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
    [ 3.039309] sys

    Guys, I think I've found the strange thing.
    First, in the recovery shell, when I type "lvm lvscan", it prints:
    WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
    and then it says that all four my logical volumes root,boot,home and var are inactive.
    So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
    I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
    The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
    Last edited by rdm (2015-01-29 21:55:44)

  • Unable to Sign In into presentation services and online RPD obiee11.1.1.3.0

    Hi,
    I am using OBIEE11g (11.1.1.3.0) on Windows 64bit server, suddenly i have problem i could not able to login my Dashboard and RPD (online mode) [i.e: i am able to login offline mode in RPD] but Weblogic console and EM and OPMN all services are up .
    Please check the below error:in RPD
    http://imageshare.web.id/images/ra9qhx8pm4liwsk1rexd.jpg
    In EM:
    http://imageshare.web.id/images/y06x8bu0huhoisyqy718.jpg
    while testing DSN also error
    http://imageshare.web.id/images/zgq47suhrjabe3ye2ck.jpg
    Last few months ago i have faced the same issue ..then i resolved below method
    Unable to Sign In into presentation services and RPD obiee 11
    Issue :I had a trouble to login into RPD (online mode) the Presentation services lately.
    It was working fine before and after changed console user sequrity things changed and was having issues to login lately after that.
    It always gives me invalid username/Password was entered message when I tried to login no matter what ever username I tried.
    I was able to login into Enterprise manger and Weblogic Admin console successfully with out any issues. All the processes are up and running with out any issues.
    Tried rebooting successfully and still it wont let me login into Answers. So I tried if i could login into Admin tool and it wont let me login there as well.
    So I created new Admin user in the Weblogin console and tried to login using the new user and still no luck. The new admin will let me login into the EM and WLC but not into Answers and rpd.
    I tried deleting old references of the user directories in the catalog and still no luck.
    It has something to do with the credential store. What ever user name I created its not mapping it to the Answers/rpd inspite of both the services are running
    Solution:
    ======
    1. Please follow instructions given in
    How to fix “Unable to Sign in. An error occured during Authentication" error when a user logs in OBIEE 11g (Doc ID 1302924.1) step by step, for those steps you have done, please double check and make sure what you've done are correct.
    2. You are still not able to logon because you have missed a few steps as the following:
    8. Edit the NQSConfig.INI file to reset the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES to NO and restart the Oracle BI Servers.
    9. Remove, set to none, or comment out the line (see UpgradeAndExit in the following example) added to the instanceconfig.xml file (that instructs Oracle BI Presentation Server to refresh GUIDs on restart).
    10. <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
    11. <ps:UpgradeAndExit>false</ps:UpgradeAndExit>
    12. <ps:UpdateAccountGUIDs>none</ps:UpdateAccountGUIDs>
    13. Restart the Presentation Server for the instanceconfig.xml file that was updated.
    14. Make sure Oracle WebLogic Server and the system components are also running, if they are not running, restart them.
    b) Relogin as the problematic user to verify if you still see the “Unable to Sign In” error
    Step 2 : Delete user from rpd if present
    a)Launch admin tool and open rpd in OFFLINE Mode
    b)Click Manage > Identity > Users tab to verify if you see this user present
    Note : Normally you will only see list of users when you open rpd in ONLINE mode. Unless the users were created manually in rpd, no users should be visible in OFFLINE mode
    c)If the user is present, delete this user entry from rpd
    d)save rpd and deploy this changed rpd using EM
    e)restart OBI Server component
    f)relogin as the problematic user to see if you still see “Unable to Sign In” error
    Step 3 : Delete the cacheduserinfo file from webcatalog
    If Step1 and Step2 does not work, then do the following
    Note : In the example below, catalog name is SampleApp and the user who gets “invalid Login” error is Administrator user.
    a)Take a backup of your webcatalog
    b)Navigate to C:\OBIEE11G\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleApp\root\users\Administrator\_prefs
    c)Delete the files name cacheduserinfo and cacheduserinfo.atr
    d)Launch OBIEE 11.1.1.3 and test by logging in as the specific user.
    the best one is 3rd one.
    but the above all methods also not working
    Kindly check and help me on that ...
    Thanks
    deva

    Hi,
    errors in \user_projects\domains\bifoundation_domain\servers\AdminServer\logs?
    ####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671768> <BEA-000436> <Allocating 3 reader threads.>
    ####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671770> <BEA-000446> <Native IO Enabled.>
    ####<Sep 5, 2011 5:24:32 PM SGT> <Info> <IIOP> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214672013> <BEA-002014> <IIOP subsystem enabled.>
    ####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674424> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674990> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675109> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_ACmZIP/2hHMOMnTCnE4XU/CV4wQ=>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675232> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675666> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675832> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675876> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675880> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675883> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675884> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675887> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675891> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675894> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675895> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675897> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675898> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675899> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675902> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675903> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675904> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675906> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675908> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
    ####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675909> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676507> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676523> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676732> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676733> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676930> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676932> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000365> <Server state changed to FAILED>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Error> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676977> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Sep 5, 2011 5:24:36 PM SGT> <Info> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676988> <BEA-000236> <Stopping execute threads.>
    Thanks
    Deva

  • [SOLVED]Arch hangs on startup, unable to find root device Mac

    For posterity, I'm editing the post with how I solved both issues.
    Hi All,
    I'm trying to dual boot Arch and Mac 10.4.11 on an old 32 bit MacbookPro1,1. I did the following:
    1) Partitioned Drive with an EFI partition, Mac partition, root partition, home partition, and swap partition
    2) Installed Mac to its respective partition
    3) Installed rEFInd to the ESP
    4) Confirmed the rEFInd was able to boot Mac
    5) Installed Arch to the root partition and mounted the separate /home and swap partitions
    6) Followed the beginners guide for the rest of the installation
    7) Did NOT install a bootloader
    - I am just using rEFInd to boot Arch; I installed Ubuntu in a similar fashion on my other (2013) MBP. I didn't create a mount point for /boot, did not install GRUB, and it works perfectly
    8) Rebooted. Selected the Arch installation from the rEFInd menu, it launched, and shortly after I am presented with this message:
    ERROR: device 'UUID=142bf...777' not found. Skipping fsck.
    ERROR: Unable to find root device 'UUID=142bf...777'.
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    sh: can't access tty: job control turned off
    [rootfs /]#
    I then booted to the live cd to try and do some noob detective work:
    # mkdir /mnt/arch
    # mount /dev/sda3 /mnt/arch
    # cat /mnt/arch/etc/fstab
    # cat /mnt/arch/etc/mkinitcpio.conf # my searching suggested the HOOKS might be the issue
    HOOKS="base udev autodetect modconf block filestystems keyboard fsck"
    Here is the output of /etc/fstab
    I am including the outputs of
    # lsblk
    # fdisk -l /dev/sda
    # blkid
    as a photo.
    EDIT:
    I was able to use rEFInd's line editor to boot with the fallback image. Everything went well for the first five seconds and I got past the previously mentioned failure. However, it is now stuck at
    [ OK ] Started Rebuild Hardware Database
    I booted again, and it froze at:
    [ OK ] Started udev Kernel Device Manager.
    I did this a few more times and it froze at:
    [ OK ] Reached Target Swap.
    [ OK ] Reached Target Sound Card.
    and
    [ OK ] Started Flush Journal to Persistent Storage.
    Why is it freezing at different points each time I boot (with fallback)?
    EDIT 2 [HALF SOLVED]:
    By switching the order of the hooks ( I still have no idea what they do) as per this link, I am now able to boot in normal (not fallback) mode. For the record, here is what I did:
    # mkdir /mnt/arch
    # mount /dev/sda3 /mnt/arch
    # chroot /mnt/arch/ /bin/bash/
    # nano /etc/mkinitcpio.conf # here I put block before autodetect in the hooks line (Why isn't this the default if it prevents the system from booting?)
    # mount -t proc proc /proc
    # mount -t sysfs sys /sys
    # mount -t devtmpfs udev /dev
    # mkinitcpio -p linux
    I then rebooted and it started up, except now it is freezing at various points in the startup sequence like the fallback image did above. What could be causing this issue?
    EDIT 3 [SOLVED]
    I don't know why this worked, but after following this advice I am now able to boot into login. Steps:
    1) Select Arch in the rEFInd menu and press F2
    2) Press F2 again to edit the boot parameters
    3) Scan to the end of the line and add
    nomodeset
    after the linux image.
    Last edited by sonarforte (2015-04-25 22:46:22)

    Yes, the UUID displayed in the error message upon bootup is the same as the UUID for /dev/sda3 as found when running blkid which is the same as the UUID for the root partition in /etc/fstab.

  • Unable to link incompatible devices. Please update all out of date devices

    I just recently got the trio kit with two DM100's and the wireless controller.
    Linksys Easy Link Advisor (LELA) does not install the controller, but it was able to be installed with most functionality manually.  (running windows xp 64)
    Right Now I am getting the error "unable to link incompatible devices. Please update all out of date devices" when I try to link my zones named Player1 and Player2 for party mode.  When viewing details they show different firmware versions (1.7.3 and 1.23.31).  I have tried to update, but they show up as completely updated in LELA.
    How can I force a firmware upgrade? I did a search, and the help file was of no use. There is also no download available.
    For the next gen of linksys home audio, how about a standard webconfig/telnet where I can define a static IP address for the wired and wireless connections?  Eventually I hope to start up wireshark and see how this all works, because the system is cumbersome in its current state.
    Solved!
    Go to Solution.

    Basically, Leave it powered on, connected to the internet over the weekend.
    Another user also mentioned:
     You can force the update to happen by using the Media Center Sofware.
       1. Open media center software
       2. Mouse over the DMP-100 player window and right click to expose menu
       3. Select About to see current firmware version and option to update.
    I did this, and it updated...eventually.  Took overnight (>3hours), and there was no user feedback/acknoledgment that the command had been received/processed/completed.

  • Firewire problem - (unable to list firewire device)

    I plugged my newly purchased WD external harddisk into the iMac fw 400 port and nothing shows. I've tried to connect it with MBP and everything is working fine.
    I checked the Console and it display the following message :
    01/09/2009 3:53:40 PM SystemUIServer[1648] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 3:54:18 PM System Profiler[1750] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 4:24:56 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:31:22 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:36:30 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:38:26 PM System Profiler[109] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 4:48:03 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:49:12 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:57:04 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 4:57:37 PM System Profiler[110] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 5:13:23 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    01/09/2009 5:18:14 PM System Profiler[110] SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
    01/09/2009 5:27:44 PM SystemUIServer[74] ICANotifications framework timed out waiting for a FireWire device with GUID '40718943393659308' to become ready!
    In the system profiler it said "unable to list firewire device"
    I've tried the following method:
    reset pram
    unplug the power cord and wait for 30 mins and reboot
    and they couldn't solve the problem.
    Could anyone solve this?
    Thanks

    First thing to do is reset the FW chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes the ports to do stuff like detect when a device wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now plug the power cord back in, plug in ONLY the keyboard and mouse, start up the Mac. Now plug in accessories/hard-drives and see if your FW ports and the drive work any better.
    Best of luck!
    Patrick
    Reference articles:
    What to do if your computer won't recognize a FireWire or USB device
    http://support.apple.com/kb/HT1317?viewlocale=en_US
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US

  • Telnet two devices at the same time 1 C# program

    Hi, currently I have one 100% working program used to telnet my Arduino circuit.
    I use this C# class found somewhere around the web: Anyway, without this forum, I wouldn't be able to finish my program.
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Net.Sockets;
    namespace USSR
    enum Verbs
    WILL = 251,
    WONT = 252,
    DO = 253,
    DONT = 254,
    IAC = 255
    enum Options
    SGA = 3
    class TelnetConnection
    TcpClient tcpSocket;
    int TimeOutMs = 100;
    public TelnetConnection(string Hostname, int Port)
    tcpSocket = new TcpClient(Hostname, Port);
    public string Login(string Username, string Password, int LoginTimeOutMs)
    int oldTimeOutMs = TimeOutMs;
    TimeOutMs = LoginTimeOutMs;
    string s = Read();
    if (!s.TrimEnd().EndsWith(":"))
    throw new Exception("Failed to connect : no login prompt");
    WriteLine(Username);
    s += Read();
    if (!s.TrimEnd().EndsWith(":"))
    throw new Exception("Failed to connect : no password prompt");
    WriteLine(Password);
    s += Read();
    TimeOutMs = oldTimeOutMs;
    return s;
    public void WriteLine(string cmd)
    Write(cmd + "\n");
    public void Write(string cmd)
    if (!tcpSocket.Connected) return;
    byte[] buf = System.Text.ASCIIEncoding.ASCII.GetBytes(cmd.Replace("\0xFF", "\0xFF\0xFF"));
    tcpSocket.GetStream().Write(buf, 0, buf.Length);
    public string Read()
    if (!tcpSocket.Connected) return null;
    StringBuilder sb = new StringBuilder();
    do
    ParseTelnet(sb);
    System.Threading.Thread.Sleep(TimeOutMs);
    } while (tcpSocket.Available > 0);
    return sb.ToString();
    public bool IsConnected
    get { return tcpSocket.Connected; }
    void ParseTelnet(StringBuilder sb)
    while (tcpSocket.Available > 0)
    int input = tcpSocket.GetStream().ReadByte();
    switch (input)
    case -1:
    break;
    case (int)Verbs.IAC:
    // interpret as command
    int inputverb = tcpSocket.GetStream().ReadByte();
    if (inputverb == -1) break;
    switch (inputverb)
    case (int)Verbs.IAC:
    //literal IAC = 255 escaped, so append char 255 to string
    sb.Append(inputverb);
    break;
    case (int)Verbs.DO:
    case (int)Verbs.DONT:
    case (int)Verbs.WILL:
    case (int)Verbs.WONT:
    // reply to all commands with "WONT", unless it is SGA (suppres go ahead)
    int inputoption = tcpSocket.GetStream().ReadByte();
    if (inputoption == -1) break;
    tcpSocket.GetStream().WriteByte((byte)Verbs.IAC);
    if (inputoption == (int)Options.SGA)
    tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WILL : (byte)Verbs.DO);
    else
    tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WONT : (byte)Verbs.DONT);
    tcpSocket.GetStream().WriteByte((byte)inputoption);
    break;
    default:
    break;
    break;
    default:
    sb.Append((char)input);
    break;
    My UI Code:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.IO;
    using System.Linq;
    using System.Net;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Net.Sockets;
    namespace USSR
    public partial class mainForm : Form
    TelnetConnection tc;
    public bool keyPressChecker = false;
    public bool connectedChecker = false;
    public mainForm()
    InitializeComponent();
    // webBrowser1.Navigate("http://admin:[email protected]");
    this.tc = null;
    this.connectedChecker = false;
    private void radioButton2_CheckedChanged(object sender, EventArgs e)
    try
    if (submarineRadioBtn.Checked)
    System.Diagnostics.Process.Start("dummySub.exe");
    catch (Exception ex)
    MessageBox.Show(ex.ToString());
    private void centerBtnCamera_Click(object sender, EventArgs e)
    private void forwardBtn_Click(object sender, EventArgs e)
    if (connectedChecker)
    this.tc.WriteLine("W");
    private void connectToolStripMenuItem1_Click(object sender, EventArgs e)
    try
    //create a new telnet connection
    tc = new TelnetConnection("192.168.0.102", 23);
    if (tc.IsConnected)
    connectedChecker = true;
    catch (Exception ex)
    MessageBox.Show(ex.ToString());
    private void controlKeyDownCheckBox_CheckedChanged(object sender, EventArgs e)
    if (controlKeyDownCheckBox.Checked == true)
    keyPressChecker = true;
    else
    keyPressChecker = false;
    private void controlKeyDownCheckBox_KeyDown(object sender, KeyEventArgs e)
    if (keyPressChecker == true)
    if (e.KeyCode == Keys.W)
    if (connectedChecker)
    tc.WriteLine("W");
    if (e.KeyCode == Keys.S)
    if (connectedChecker)
    tc.WriteLine("S");
    private void reverseBtn_Click(object sender, EventArgs e)
    if (connectedChecker)
    tc.WriteLine("S");
    private void disconnectToolStripMenuItem_Click(object sender, EventArgs e)
    try
    tc = null;
    connectedChecker = false;
    catch (Exception ex)
    MessageBox.Show(ex.ToString());
    private void controlKeyDownCheckBox_KeyUp(object sender, KeyEventArgs e)
    if (keyPressChecker == true)
    if (e.KeyCode == Keys.W)
    if (connectedChecker)
    tc.WriteLine("O"); //decrease to MID PT.
    if (e.KeyCode == Keys.S)
    if (connectedChecker)
    tc.WriteLine("P"); //decrease speed to MID PT.
    private void exitToolStripMenuItem_Click(object sender, EventArgs e)
    Application.Exit();
    Now, what I want to know is this: IS IT POSSIBLE FOR MY C# PROGRAM TO TELNET TWO DEVICES AT THE SAME TIME? 
    Thanks
    Glenn

    try this links :
    http://www.codeproject.com/Articles/19071/Quick-tool-A-minimalistic-Telnet-library
    http://stackoverflow.com/questions/25116077/send-and-receive-commands-via-telnet-in-c-sharp
    http://stackoverflow.com/questions/12283241/ssh-to-server-then-telnet-to-device

  • Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

    I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    # dmesg
    [ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3433.781119] media: Linux media interface: v0.10
    [ 3433.809842] Linux video capture interface: v2.00
    [ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
    [ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
    [ 3433.835976] usbcore: registered new interface driver uvcvideo
    [ 3433.835977] USB Video Class driver (1.1.1)
    Unfortunately, *most of the time* the camera seems invisible to my system, and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    (note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
    # dmesg
    [ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
    [ 480.171097] usb 3-1.3: device descriptor read/64, error -32
    [ 480.341235] usb 3-1.3: device descriptor read/64, error -32
    [ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
    [ 480.578007] usb 3-1.3: device descriptor read/64, error -32
    [ 480.748151] usb 3-1.3: device descriptor read/64, error -32
    [ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
    [ 481.325196] usb 3-1.3: device not accepting address 6, error -32
    [ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
    [ 481.798926] usb 3-1.3: device not accepting address 7, error -32
    [ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
    Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
    I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
    I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
    Anyway, such a hack is unacceptable... So, my questions are:
    is it indeed related to overcurrent protection ?
    is there anything else I can try ?
    should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
    If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
    Last edited by $nake (2014-10-18 16:29:06)

    uname -a
    Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
    pacman -Qi linux
    Name : linux
    Version : 3.9.4-1
    Description : The linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licences : GPL2
    Groups : base
    Provides : kernel26=3.9.4
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 65562.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Sat 25 May 2013 16:28:17 CEST
    Install Date : Sun 02 Jun 2013 15:30:35 CEST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • 5.1.4 update breaks HDV capture? Unable to Initialize Capture Device

    Problem:
    Final Cut Pro cannot capture standard 1080i60 HDV footage from Sony FX1 camcorder. FCP reports "Unable to Initialize Capture Device" when the log and capture window is opened. However, the footage CAN be captured in iMovie (which is interesting, and unacceptable). When HDV>DV downconvert option on camcorder is activated, footage CAN be captured as anamorphic SD, so the camcorder and FW do work.
    The problem is occuring on a rock-solid FCP system that I use on a regular basis (mainly for SD editing). It has been approx 2 weeks since I last attempted a HDV capture, the system has been working great with SD footage (still does).
    Factors that have changed to my knowledge since HDV capture was last functioning properly:
    *Added a new external FW drive into regular usage (a different brand than normally used, no issues with it so far).
    *Updated FCP to 5.1.3, and then 5.1.4 when that fix came out. All SD captures and work have been fine so far.
    Here's what's interesting...I had a copy of the FCP v5.0.4 .app that I had saved an archive of prior to the crossgrade update. Guess what? I can load it up, and it captures HDV without any problems! With that in mind, this looks like an FCP 5.1.4 issue. But I am at a loss on how to proceed further in troubleshooting. Many thanks in advance for any assistance.
    Matt Jeppsen
    FresHDV.com
    ---NOTES---
    What I have tried:
    *Attempted capture with a different Sony FX1 camcorder.
    *Swapped firewire cables and system firewire ports.
    *Attempted capture with camera FW chained to an external HDD.
    *Unplugged all other external firewire devices from the system.
    *Trashed FCP prefs using FCP Rescue 5, created new project using Easy Setup (for HDV).
    *Tried different variations of FCP A/V settings, tried all the HDV FW device control presets and the HDV AIC capture preset.
    *Per instructions at http://docs.info.apple.com/article.html?artnum=301852 I removed the numbered Quicktime pckg Receipts and re-installed the latest version (7.13). Post-install/reboot, I repaired Disk Prefs and Verified the disk using Disk Util.
    *Have also attempted installing QT 7.13 2 and 3 times in a row, also trying disk prefs repair BEFORE the post-install reboot.
    Final Cut Pro Audio/Video Settings:
    Sequence Preset: HDV-1080i60
    Capture Preset: HDV
    Device Control Preset: Sony HDV Firewire
    Sony HDR-FX1 IN/OUT REC settings:
    *VCR HDV/DV: HDV
    *COMPONENT: 1080i/480i
    *i.LINK CONV: OFF
    *TV TYPE: 16:9
    *A/V->DV OUT: OFF
    System/Software Facts:
    *Final Cut Pro 5.1.4
    *Quicktime 7.13
    *PPC Mac G5 2.7 Dual (2.5GB RAM)
    *35GB free on System, 45GB free on internal FCP Scratch disk
    Final Cut Pro 5.1.4, G5 DP 2.7 (PPC) Mac OS X (10.4.8)

    I think I figured out this vexing problem. I too was having the same issue. Check to see that your Quicktime is newer than 7.1.2. If it isn't you'll have to upgrade it. I only upgraded to 7.1.6 here because I was afraid of going to a really new version. http://www.apple.com/support/downloads/quicktime716formac.html. After I upgraded my quicktime, I ran software update and the Final Cut Pro 5.1.4 update appeared. I hoipe this helps.

  • Unable to Initialize Capture Device

    Hi,
    I am having a problem importing/capturing HDV video from my JVC HD GR 1 getting "Unable to Initialize Capture Device".
    I have been able to capture fine up to this point, finicky some times to be sure, but workable, then in the last few weeks it began getting more and more finicky (wouldn't connect to camera, restart and it works fine), until just the other day it wont connect no matter what I do!
    Help?
    Ask questions if you need clarification.
    Camera: JVC HD GR 1
    Tape: Mini DV
    Format: HDV
    Software: FCP 5.1.4

    Unfortunately when both "Capture" and "Device Control" presets are not set to HDV it wont even try to connect and gives me this warning:
    "To capture HDV source material, both the Capture and Device Control presets must be configured for HDV; otherwise, to capture in another format, both must not be configured for HDV."
    As a side note when my camera was connecting to FCP. FCP would only give me on screen controls half the time.

  • Unable to initialize capture device and device control in HDV

    I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
    I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
    I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
    I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
    Im at my wits end, Ive been working on this for a whole week now.
    Thank you,
    Bugs

    It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
    x
    To do a full quicktime reinstall.
    Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
    Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
    Run the Quicktime installer.
    Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
    Reboot
    If this doesn't work, then the problem lies elsewhere:
    1. your system - user preferences, firewire ports or other system elements.
    2. your equipment - camera/deck/firewire cables.
    3. your process - not setting up the software properly or using the software erroneously.
    Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
    Troubleshooting Steps for OS X
    by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
    FIRST AID
    01 Completely shutdown, wait a 5 minutes, restart
    02 Make sure you're not running out of free space on the System volume
    03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
    04 Repair permissions using Disk Utility
    05 Create a new user account, and see if the problem persists there
    06 Clear system & user caches
    07 Run FCP Rescue
    08 Unplug all USB, Firewire devices except Apple mouse
    09 Startup in SafeBoot mode, and see if the problem persists there
    10 Reset system firmware
    MORE SERIOUS TROUBLESHOOTING
    11 Reapply the latest combo updater
    12 Run the Apple hardware diagnostic CD
    13 Check the hard drive for bad blocks
    14 Take out 3rd party RAM
    15 Unplug 3rd Party PCI cards
    16 Reset PMU
    17 Archive and reinstall the OS
    18 Reinstall the system from scratch
    19 Send the machine back to Apple

  • Unable to locate external device after upgrade

    i have been using FCE 2.0.3 and mac os 10.3 to view clips on video monitor (tv) easy set up was dv pal. so i chose view and and then firewire from the FCE menu to review clips on video monitor through my cannon mv750i-worked ok until recently. I have also been able to capture as well. Nothing wrong with the camera as it works ok in another computer (power pc) which has mac os 10.4.7 but fce is still 2.0.3. So is something i am not doing?
    i then upgraded to mac os 10.4 and fce to 3.5 and easy set up also at same dv pal and a window message comes up informing me that "unable to locate external device" or you have changed system configurations. I have made sure that the camera is on. so please can someone tell me what i can do?

    When I recently upgraded from OSX 10.3.9 to OSX 10.4.7 I found that FCE 3.0 would not recognise the camera.
    When I upgraded to QuickTime 7.1.2 the problem immediately disappeared.
    http://www.apple.com/quicktime/download/mac.html
    Ian.

  • "iTunes was unable to verify your device" after succesfully completing recovery mode on iPhone 4

    I have an iPhone 4 which has never caused me any problems, until i updated to iOS7 it started lagging and battery didn't even last until midday (having it charged 100% in the morning!).
    In just a few days it turned off automatically and wouldn't turn on. I googled and solved it by pushing the two buttons together for about 10 seconds. iPhone revived, and all the data was intact though many people states it would've been erased.
    The morning after, using my iPhone more carefully not to have it crash again, it crashed. 10 seconds wouldn't do and I gave up, until the day after I found by surprise that the battery had run out and it finally showed some sign of not being completely dead!
    I connected the cable to iTunes and pushed the Home button before connecting the iPhone and it entered Recovery mode. Recovery mode was completed and the iPhone had to restart to complete the process. While completing I get the error message "iTunes was unable to verify your device, please disconnect and reconnect your device". And from here I don't get anywhere, so I will probably visit Apple Store and ask what can be done, but if anyone has had the same problem please share any possible solution to this problem!

    I had to contact Apple Store and make an appointment. They tried the last step suggested (which I had already tried three times) and stated that the memory had failed. They said it probably failed due to having some small issue already on the phone and then updating to a new iOS.
    They could only offer me an exact copy of my iPhone but new for 149€.

  • "iTunes was unable to verify your device" error

    Hi,
    I have a first generation iPad that has been working just fine. I decided to give it away, and so I wiped it and set about restoring it to factory defaults.... except, now I keep getting the error "iTunes was unable to verify your device. Please disconnect and reconnect your device. If the error persists, see your local Apple store for assistance." Well, the error is persisting despite disconnecting, reconnecting, attempting to restore several times, attempting to use DFU mode, no matter what I do, I get this error. I did see in a different forum, someone said this suggests the iPad was jailbroken or hacked in some way. So, just for clarity here - this iPad was never running anything except standard iOS. Anyone have any ideas?

    Apple's activation servers are down at the moment.  Try again in a few hours (or even tomorrow).

Maybe you are looking for