RMI cluster management tools
Hello,
My application requires managing a bunch of RMI server processes running on several linux machines (about 5 to a machine).
This application "broker" inputs jobs from an external source (web server) and then delegates each job to the appropriate RMI server process based on a mapping name.
Most of code is simple grunt admin work like starting the processes on each machine, checking their condition at some frequency, keeping track of processes that are in use or available, shutting down processes, etc.
I suspect what I'm trying to do has been done before (many times), so I'm looking for a some suggestions on pre-existing projects/libraries are good for doing this type of thing.
My requirements:
* Linux
* Java API
Thanks for the response.
What I'm after is a framework to handle launching processes, monitoring them, and shutting them down - boring admin work and not so much job scheduling.
I can't use the model where delegates ask for work because of the large amount of persistent state between jobs. I would have to serialize between every job, which would take a long time (jobs are short, serialization long).
So, in my scenario, the consumer app is bound to a specific process for the life of the session.
Similar Messages
-
Sunplex Manager Cluster GUI Tool doesn't work
The Sun Cluster management tool doesn't work, I keep getting the following error on my browser:
"System Error, An Error was encountered by the system. If you were performing an action when this occurred, review the current system state prior to proceeding"
The GUI shows Nodes, Resouce Groups, Shared Storage etc in the left hand frame and the error in the right hand frame.
The command line interface works fine so does the cluster.
Solaris 8 07/03 SPARC
Sun cluster 3.1
Relevant patches loaded: 117950-25, 118626-09, 118671-03
java -version: 1.4.1_01-b01This is now resolved - The machine was set up to use a DNS, the DNS resolved the name correctly but the hosts file did not have the full canonical name of the host.
I added the full cname of the node to the /etc/hosts file and all is well now. -
Failover Cluster Manager Missing
I created new Windows 2012 R2 Servers (non-core) and configured a functional failover cluster.
I then removed the GUI using the Powershell command:
Remove-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra
After testing applications, it was determined that the applications would not run properly without the server GUI shell. I added it back using the following PowerShell command:
Add-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra
I notice that after this, when I go into Server Manager, Failover Cluster Manager is no longer available.
How do I restore it?Hi;
Simply remove the Failover Cluster Management Tools from the Remote Server Administration Tools in Server Manager and reinstalling it again should resolve your problem.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Unable to create a clustered VM using Remote Server Administration Tools - Failover Cluster Manager
Hi
I am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.
I have installed Failover Clustering feature on these two Hyper-V servers and remote server administration tools for Failover Clustering on WS2012 DC Edition with GUI.
I have created cluster using powershell cmdlets on Hyper-V server because I was unable to create a cluster using RSAT-Failover Clustering (May be some privileges issues).
The problem is " I am still not able to create a Hyper-VM using Failover Cluster Manager on WS2012 DC Edition server". It gives me an error "Invalid operation"
Any Help regarding this issue will be very appreciated.
Thanks in Advance.....
Abhinav | MCTS-Server VirtualizationThanks Tim for your response but atleast I should be able to create and configure VMs for high availability.
I think this is not the issue which I am facing. It gives me an error "invalid class". There is something missing.
Please check and let me know if it can be solved. Any help will be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization -
Failover Cluster Manager 2012 Showing Wrong Disk Resource - Fix by Powershell
On Server 2012 Failover Cluster Manager, we have one Hyper-V virtual machine that is showing the wrong storage resource. That is, it is showing a CSV that is in no way associated with the VM. The VM has only one .vhd, which exists on Volume 16.
The snapshot file location and smart paging file are also on Volume 16. This much is confirmed by using the Failover Cluster Manager to look at the VM settings. If you start into the "Move Virtual Machine Storage" dialog, you can see
the .vhd, snapshots, second level paging, and current configuration all exist on Volume 16. Sounds good.
However, if you look at the resources tab for the virtual machine, Volume 16 is not listed under storage. Instead, it says Volume 17, which is a disk associated with a different virtual machine. That virtual machine also (correctly) shows Volume
17 as a resource.
So, if everything is on Volume 16, why does the Failover Cluster Manager show Volume 17, and not 16, as the Storage Resource? Perhaps this was caused by an earlier move with the wrong tool (Hyper-V manager), but I don't remember doing this.
In Server 2003, there was a "refresh virtual machine configuration" option to fix this, but it doesn't appear in Failover Cluster Manager in Server 2012.
Instead, the only way I've found to fix the problem is in PowerShell.
Update-ClusterVirtualMachineConfiguration "put configuration name here in quotes"
You would think that this would be an important enough operation to include GUI support for it, possibly in the "More Actions" right-click action on the configuration file.Hi,
Thanks for sharing your experience!
You experience and solution can help other community members facing similar problems.
Please copy your post and create a new reply, then we can mark the new reply as answer.
Thanks for your contribution to Windows Server Forum!
Have a nice day!
Lawrence
TechNet Community Support -
Monitor Replication Health in Failover Cluster Manager?
Have two Hyper-V 2012 R2 Clusters.
One Cluster contains all production VM's.The second cluster is on another location and is intended only for HA purposes. All production VM's from the first clusters should be replicated to the other cluster.
What is the best way to monitor the replication health of all VM's? In Failover Cluster manager, it's not possible to add a column "replication health" to the "roles" window. It's not practical to click on every VM to view the replication
health. In Hyper-V Manager, it's easy to add "replication health" to the virtual machine window, but clicking on every host to verify the replication health is not very practical as well.
Thank you in advance for any hint (I know that we could use SCOM or something similar, but these complex tools are out of scope).
FranzHi FranzSchenk
I think the only real option open to you is the use of PowerShell in your situation. Have a look at this link and see if this is the sort of thing that will help you.
http://www.serverwatch.com/server-tutorials/checking-hyper-v-replication-health-using-powershell-cmdlets.html
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
I can't find failover cluster management after creating hyper-v cluster on SCVMM 2012 R2
I've created a hyper-v cluster on scvmm 2012 r2 but I can't find the failover cluster manager to move storage resources. all hosts are showing to have hyperv role and failover clustering feature installed. disk Witness in Quorum is good, same as for the
other CSV lun. Please help me Microsoft. Thank you.The management consoles are not getting installed while building the cluster through SCVMM. However, its not mandatory to have the management tools on the server. You can have it on a different machine with this management tools installed and connect to
this cluster remotely.
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com -
Different used space for CSV in cluster manager / explorer
Hi everyone,
in our Hyper-V Cluster consisting of two 2012 Servers we have got the following problem:
The used disk space in windows Explorer is roughly 1TB less than the used disk space which is shown in the Failover Cluster Manager. In other words: The CSV is nearly full and I don't know why.
Diskpart, failovercluster Manager and every disk tool I tried is showing 6TB as disk size and although Explorer is showing only 5TB data the cluster is showing only 100GB free.
any help?
thanks,
MichaelHi,
Did you used the dedup with your CSV?
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Disk Utitlity has "Lost Connection" with Disk Management tool"
[ Edited by Apple Discussions Moderator; please start a new topic about your technical issue. ]
Running OSX10.3.8
I installed:
"iTunes" (6.0.2)
"iPod Updater 2005-11-17" ((null))
"iChat Update" (2.1)
Went to repair disk permissions
I get this error:
Disk Utitlity has "Lost Connection" with Disk Management tool" Please quit Disk Utility.
then it says quitting Disk Utility may render the disk useless. Stopping the scan just gives a "stopped by User" red text message in the DU screen.
Had to Quit. No other way out.
Now it will not repair "or" verify Disk permissions at all.
What to do?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)Getting the same results booting off of the install CD. I even ran fsck -y after a soft boot(command S). Note I also installed the iPod updater and iChat update.
I'm getting a crash log that has to do with DiskManagement
Path: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
I tossed the pref file for Disk utility and tried to locate a pref for the Disk Management but nada...
Is there a prefs file that needs to be tossed?
Anyone do a recent Onyx Maintainence cleaning?
Is there a way to do an iTunes Uninstal and reinstall a previous version?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8) -
'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set
Using 4 internal drives, I have specified the following setup for each:
2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
The 4 speed partitions stripe to a single RAID volume correctly.
The 4 data partitions are used to make a RAID 10 volume as follows:
The first 2 data partitions are mirrored to make a 'data-A'
The next 2 data partitions are mirrored to make a 'data-B'
These complete correctly.
Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
"Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction. -
Disk Utility has Lost Connection with the Disk Managment Tool
Hi,
For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
Console Log follows:
===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
Thinking a plist had become corrupted, I trashed the following:
com.apple.systempreferences.plist
com.apple.RemoteDesktop.plist
com.apple.Remotemanagement.plist
com.apple.sharing.firewall.plist.
System Preferences started out very slowly, but then all the panes except Sharing would work ok.
I booted from the install disk and performed a Disk Repair. There were no problems reported.
When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
Thanks,
BobI found this crash log that was generated about the time I had problems with System Preferences hanging.
Thoughts?
Bob
Entitled "writeconfig.crash.log"
Host Name: Bobs-Big-Mac.local
Date/Time: 2006-05-15 21:08:17 -0800
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: writeconfig
Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
Version: ??? (???)
PID: 2707
Thread: 0
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000001
Code[1]: 0x90a8d2c0
Thread 0 Crashed:
0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
4 writeconfig 0x0000baac 0x1000 + 0xaaac
5 writeconfig 0x0000ec84 0x1000 + 0xdc84
6 writeconfig 0x0000ad88 0x1000 + 0x9d88
7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
PPC Thread State:
srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
Binary Images Description:
0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib -
Guide to migrating a HV 2012 cluster managed by VMM to HV 2012 R2 + VMM R2
Hello everyone,
I have a task on hand and even after searching the ‘net for quite some time, I have not come across a solution listed on one page. I hope this thread becomes a “Guide to migrating a Hyper-V 2012 cluster managed by VMM 2012 to Hyper-V 2012 R2 + VMM 2012
R2”.
My searches did find these useful threads but they do not have all the information I need:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/eb824c20-9632-4ec9-9a71-2d1717e44a81/migrate-from-2012-to-2012-r2-cluster-with-vmm-2012-r2?forum=virtualmachinemgrclustering
http://social.technet.microsoft.com/Forums/windowsserver/en-US/34412c47-3a37-4ead-aa67-f5119382ae9d/upgrade-from-server-2012-clusterhyperv-to-server-2012-r2-clusterhyperv?forum=winserverClustering
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5d4103b5-6491-40d2-b52e-7fffde9580ff/vmm-2012-sp1-supported-to-manage-windows-server-2012-r2-hyperv-cluster?forum=virtualmachingmgrhyperv
So let me start by listing what I have right now:
I have a 4 node cluster running Hyper-V 2012 SP1 (the free, core edition).
It is currently being managed with SC VMM 2012 SP1.
99% of the VMs are running on CSVs cut off a Fiber Channel SAN. I have some VMs on local drives and they are not HA.
Everything is in production. I have around 90 VMs total.
I do have capacity to take up to two HV hosts out of the cluster and still survive just fine.
I also have two other spare servers which have no OS on them.
What I don’t have:
I do not have SCOM or DPM or any other SC component.
Well, I used to have SCOM 2012 but I uninstalled it and removed it. Long story, don’t ask! I do plan to install SCOM 2012 R2 at some point soon.
Here is what I want to do:
Upgrade both the cluster and VMM to 2012 R2 version.
This time, I want to use Server 2012 Datacenter edition (with GUI).
I plan to join the spare servers to the 2012 R2 cluster.
Here is what I have learnt up until now (and correct me if I am wrong):
The steps I need to take to accomplish all this are:
Upgrade VMM 2012 to VMM 2012 R2 version
Eject at least one host from the cluster
Install Server 2012 R2 on that server.
Configure a one server (or more, if possible) cluster running 2012 R2
Give that server the same old CSVs
Use the “Copy cluster roles Wizard” to copy VMs from old cluster to new cluster. However this will incur downtime.
I have not started doing all this because I am not 100% sure on some things.
Here is the list of my questions:
1. About step #1: Upgrade VMM to VMM R2 version
Is there any reliable / official guide out there for this? I have seen these on the net:
http://technet.microsoft.com/en-us/library/dn469607.aspx
http://www.systemcentercentral.com/migrating-from-vmm-2012-sp1-to-vmm-2012-r2-step-by-step-upgrading-to-2012-r2-series/
The problem I see is that none of them talk about upgrading a clustered scenario. Do I assume that the steps of upgrading VMM 2012 to 2012 R2 are the same with or without a cluster?
On the server I eject from the cluster, do I upgrade the OS or do a fresh install? I prefer doing a fresh install.
2. Is there a way of doing all this with no downtime?
I am worried about needing downtime for the last step “copy roles…”. I wish there was a way of migrating the roles (VMs) without any downtime.
3. Anything I need to worry about?
I wonder if I need to be careful about granting access to the CSVs to the new R2 Cluster. Will that cause any problem?
Any inputs on this topic are highly appreciated! I promise to update the first post so that it becomes a guide as I get corrections and inputs from everyone :-)
Thanks!
-Rajeev rajdude.comTime to tackle the actual Hyper-V Cluster migration:
So by this time, I have two nodes in the old Hyper-V 2012 cluster managed by SC VMM 2012 R2. I wiped out the OS on the other 2 nodes and installed Windows 2012
Datacenter on them. This time I am not installing the Core edition for Hyper-V. After working with Core for a year or so, I feel Core gives way too much trouble for very little gain.
Now I plan to follow a technet document which describes how to
migrate virtual machines from a Hyper-V cluster using Cluster Shared Volumes (CSV). Although this document does not describe VMM I think VMM should be able to use those migrated VMs. Here is this migration strategy in a nutshell:
Create a new cluster using 2012 R2
Present the existing CSVs to the new cluster.
Leave the disk offline on the new cluster.
Use the copy cluster roles wizard in Failover Cluster Manager to copy VMs from old cluster to new cluster.
Virtual machines are created on the new cluster but are not turned on.
Turn off the virtual machines and take the disk offline on the old cluster and then on the new cluster you need to enable the disk and start the virtual machines.
Hmmm…sounds pretty involved to me. Well let’s get on with it. First things first…in order to use this migration strategy we need to create a new cluster.
Here are the steps I took to create a new cluster:
Install 2 Windows 2012 R2 on the same 2 servers I ejected from the old cluster.
Correct drive letters of local hard disk drives and optical drives, if needed.
Update them.
Setup networking. Take care of main network, heartbeat for cluster and iSCSI networks (if applicable). Here are some best practices:
http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
http://blogs.msdn.com/b/clustering/archive/2011/06/17/10176338.aspx
https://social.technet.microsoft.com/wiki/contents/articles/9711.hyper-v-network-design-configuration-and-prioritization-guidance.aspx
http://technet.microsoft.com/en-us/library/dn550728.aspx
Make sure your bindings order is correct. I had to correct mine because by default, the heartbeat network was at the top!
I also followed this checklist of Hyper-v’s best practices.
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
Much of the stuff in there is very relevant.
Add the domain account used for host management and the SCVMM service account to the local admin group on the 2 new servers.
Use SC VMM manager to install Hyper-V role on the two new servers. VMM can do that as a part of the “Add Host process”.
In VMM, right click on “All Hosts” and click on “Add Hyper-V hosts and clusters”. Go through the wizard and add the two new servers.
When I did this, it failed. I got three errors, Error 10441, Warning 10444 and warning 26179.
I logged into one of the new servers locally and from Server Manager >> Dashboard >> Add roles and features.
On the “create virtual switch page, I selected the NIC connected to the main company network (as this time I have only one NIC for the company network, you should have at least two).
Unfortunately, even this time I get an error: Access is denied: 0x800700005
This is very strange because I am already logged on as an admin here.
Now I started checking for windows updates. I remembered that the checklist above also has a set of recommended updates. There was a huge 890MB), cumulative update available KB2919355. I installed and restarted after that.
I also installed the feature “Multipath I/O” since I was getting the “warning 26179”.
After this installation, I ran windows update again. No available updates.
Now I went back to VMM. I really want to enable the Hyper-V role using VMM. So I repeated step # 8. Interestingly, this time I did not get any error. VMM rebooted the host automatically. Yay!
Now I repeated steps 14 to 16 on the second server. Worked fine!
At this point we are ready to create a new cluster using the two nodes. I followed this document:
http://technet.microsoft.com/en-us/library/gg610576.aspx
At this point I ran into a problem. I talked about it on my thread: When I try to create a new HV cluster using the "Create HV Cluster" wizard in VMM, it comes to a screen titled "Storage" where it shows all the existing LUNs as disks and
it says "select the discs you want to cluster". That is all good but at the bottom it says "Any data on the disks will be overwritten”. Of course I want to keep my data intact so I can use the copy cluster roles wizard later on! How can I create a new cluster
which uses the same disks as the old cluster WITHOUT wiping out the disks?
Ok so I did not get an answer on the forum, so I decided NOT to take a risk and do a quick test. Here is what I did: I masked/unexported all CSVs. Then I created a test CSV, put some data on it and proceeded to create a cluster using that
CSV and a quorum/witness disk.
This time on the storage page, For the test volume I checked the checkbox under CSV. I left the format boxes unchecked << THIS IS WRONG read below for updates
The attempt failed. Somehow the test CSV got configured as a local disk on host #1, it was showing up as NTFS instead of CSVFS. The VMM cluster creation process stopped. I found out that both the CSV and the quorum disk were online on the
node #1. I made them offline.
Retried , got the same error as last time : Mounts storage disk on (servername).
FINALLY I realized that step # 21 bove is WRONG! You need to select “Do not format” under the file system column. This will leave the CSV untouched.
Unfortunately, even this did not work. So I just took away ALL CSVs and tried to recreate the Cluster. It STILL did not work! LOL! The error is 25303
I corrected the permissions as this:
ON the HV hosts, inside local administrators group add VMM service account, Host admin account and VMM server’s computer account
Inside “Virtual Machine Manager Servers” group add VMM server’s computer account
Unfortunately, it still did not work! The error is 25303 (same). I looked everywhere including all the logs (system and security) nothing there. I searched on the net but never found a solution. Eventually I accepted defeat and tried to
create a cluster from outside VMM…using “Failover cluster manager”
Even then I got an error! It seems to me that it failed on creating the computer name of the cluster in AD.
I tried it again with a different computer name in AD…something which had never been created earlier (I had mistakenly created a computer name for the cluster and then deleted it). This time it worked! However I got an error that the witness
disk was not created because it does not have an acceptable file system. Hmmmm.,….I had not formatted the witness disk since I thought the cluster wizard will do it. I created a Witness disk later, manually.)
Interestingly, when I opened VMM again, I see the cluster in there and I am able to manage the cluster from within VMM…interesting!
-Rajeev rajdude.com -
Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
ScottHi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started? -
As an asset management tool it should manage all images but only adjust raw
Is Aperture an image management tool, raw converter/workflow tool, or both?
Let it be both! Restrict what is is ALLOWED to ADJUST, but manage it all.
When I do a shoot, I start out with 300-1000 RAW images.
By the time I am finished with the client I will have narrowed the pile of image assets down to 20% of the original RAW files, JPGs of all of those, AND 10% of the selected originals will also end up as layered PSD/TIFF files. But when I go back in and want to open a PSD file then why not allow just that Then save it back as the same or a version..
OR when I tell it to open a PSD file in CS2 it will as "make a version(full or flat), or edit original?" and of course a "don't ask me again for this format" check box!
So why not leave the layered PSD/TIFF files alone and NOT allow them to be adjusted, only managed?
Think about it, IF I want to adjust my multilayered PSD file I will most definitely only trust that to CS2 where I retain full creative control over the layers, and I can output a version if I want!
IF I am crazy enough to feel the need to use the shallow tools of Aperture to tweak the brightness/level/curves/saturation/WB/etc/etc of a flattened COPY of my layered PSD file then I will make a copy and drag it into Aperture. By shallow I mean that CS2 and layers has much more control than the single layer tools of Aperture.
As an option leave it open as a configuration choice in the prefs... "Adjustable image formats: RAW, JPG" and even on a per image basis, right-click--> image status-->Adjustable or Unadjustable.
Yes, I sent this idea off to Apple!Moki,
Right there with you. Here's my rough scenario:
1. I shoot 500 RAWs.
2. Cull down to 100 keepers.
3. Client culls down to their 50 selects.
4. Anywhere from 25-50 become layered PSD files, depending on the presentation the client wants (sizes, packages, borders, special effects, etc.).
5. In addition to those 25, there may be *completely new* composites (PSD's) created from combinations of the 25 -- this isn't a version of one of the original masters -- it is a *completely new* image that Aperture needs to manage in the project (so import of PSD without flattening and/or allowing Photoshop to Save-As into the Aperture library is a must).
I'd even add to your request about allowing adjustments. It would be totally cool if the adjustment tools were context-sensitive, enabled when working with an image (like RAW or JPG) where Aperture can adjust, and disabled when working with an image (like layered PSD or TIFF) that it won't adjust.
Anyway, I have complete confidence that eventually, the RAW conversion will be fixed, so even though that's an immediate glaring issue, it doesn't seem to me to be the long-term workflow killer. Being able to traverse this editing stage of the workflow with Photoshop is crucial. Without this, its basically
a complete project export after the initial organization stage, and the rest of the workflow is either managed entirely in another tool, or a complete pain to bring back into Aperture for output, which leaves files strewn everywhere for backup and archiving.
Brad -
Help define the requirements for an Oracle Spatial management tool
Hi,
We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
What features would you like to have in a management tool for your spatial databases?
The features we've got so far:
1. Viewing of vector data in a map + attributes
2. Loading from shapefiles
3. Exporting to shapefiles
4. Validating metadata, indexes and spatial data.
We are adding editing of vectors in the next version - basic stuff for add, update and delete.
But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
Any feedback either to myself or the forum is much appreciated.
cheers,
Andrew
[email protected]
PS If you like to have a look at what we have done so far, go to http://www.geometryit.com/products/spatialConsole.phpAndrew knows what I have asked for but for others to think about and to start
the ball rolling, here's what they are:
1. Ability to enter own SQL commands but with PARAMETERS for attributes
and shapes as in the following examples:
SELECT ...
FROM my_spatial_table a
WHERE a.ATTRIBUTE = :attr
AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
When executed the attribute value is asked for via a input box (data type?)
and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
Similarly, this would work for INSERT, UPDATE and DELETE...
INSERT INTO my_spatial_table (shape) values(:polygon)
The data type of an attribute parameter could be determined in two ways:
a) By querying the Oracle catalog;
b) By using a "PARAMETERS" command before the query as follows
PARAMETERS name type [(size)] [, name type [(size)] ...]
The PARAMETERS declaration has these parts:
name The name of the parameter.
type The type of the parameter.
size The size of the parameter in characters or bytes.
2. When executing an SQL SELECT statement I would like the tool
to suggest the HINTS that are needed to improve performance.
3. Following on from 2, I would like to Tick an option that would return the
EXPLAIN PLAN that the query optimizer used when executing my query.
4. The tool has to support ALL Oracle's spatial vector data types.
5. It would be nice to be able to work with GeoRasters. Since Spatial Console
imports/exports shapefiles why not the same for rasters. However, the problem
with supporting foreign data formats is WHERE DO YOU STOP!!!!!
6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
why not the MapViewer metadata as well)?
regards
S.
Maybe you are looking for
-
Until this gets resolved we can't access iPhoto or my iPhoto library. Unfortunately didn't back up my photos before we "upgraded" to Yosmite. Any ideas?
-
How can i execute OS command in ODI?
hi all, i have an exe file and i want to execute this file in ODI with scheduling? how can i do this? thanks. Eser
-
SetConnectionProvider() vs commond logical system names
I inherited a project from a student that contains 1 webdynpro DC. There are 7 models defined with multiple RFCs per model. Originally they had all their own meta and model data logical system names which resulted in a total of 14 JCOs defined in Web
-
I cant see any of the page. Only the menu bar
-
Hello every body i am newbie in SAP BUSINESS ONE and my question is simple: how can I add choose from list in text field to choose a business partner .I can't find a clear answer please helpppp.