RMI stuck while transfering a file

Hi!
On RMI server side I have an object that reads a file and sends it to RMI client a an byte[]. For example on Windows if I look under Networking tab in Task Manager I see that the network in transferring something.
Sometimes (I'm not sure when, but suspect slow connections) the transfer is stopped despite the fact that client did not get the whole thing. It looks like RMI lost the connection, but did not throw any Exceptions. Any pointers?

I am having the same issue. Ihave transferred purchases (652 out of 724) from my iPod to my new computer. It then stops at one particular song. I have stopped and restarted the transfer 3 times and continues to be stuck on one song - ANY THOUGHTS!

Similar Messages

  • While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings:   "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

    While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings:   "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

    This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

  • An error has occurred while transferring this file - MuVo v

    Hi, I recently purchased a MuVo v00, and am in the process of putting some music on it. I put a number of songs on it yesterday, and after noticing it still had almost 300 megs free, I decided to add some more. However it will now not allow the addition of ANY songs. Any I try to add, it fails to do so, giving me a "an error has occurred while transferring this file" message. Even when I attempt to rip directly from my cds to the device, it gives me this error.
    I've checked that all my software is up-to-date (using the automated update feature with the software I was provided)
    I would appreciate any help with this.

    I have exactly the same problem with my MuVo? .5 GB!
    I know that i had once about .GB of mp3s stored on it, however, I deleted all of them to upload a different mp3 collection. Now when I upload files to the MuVo, it stops when I have transfered about 450 MB. However, Windows-Explorer and Creative Media Source both say that there are still 900 and a few MB left, but when i try to copy a file - again "no space left on device".
    I tried to:
    delete all files, try transfer again - same effect
    run scandisk - no change
    format the player from the rescue menu - no change (whatever this does, this is not a real format, more a quickformat)
    updated to the latest firmware - still no change!
    I'm kinda really pissed now, I spent quite some time googling, but didn't find anyone else with that problem.
    So .. where went that "space"? Would it be usefull to re-format the player using the Windows format tool, like suggested in that thread (with the settings from that thread):
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=400
    I started to do that, but since it was *very* slow and the disk was seeking a lot (battery eaten up after about 20 mins!) I stopped the process.
    Maybe I will try that afain tomorrow, but *somehow* this can't be the real solution. Whatever the MuVo does here seems not to be standard behaviour, since scandisk reports the dri've to be OK. Would it be possible to re-partition the MuVo? I guess thats not a good idea, since I believe that the firmware is somewhere on the disk, too.

  • Mac mini drop connection while transferring data/files

    Hi guys,
    I took my second step away from Windows and into Mac by buying the mac mini and gave it as a present to my mom! :-D I love that little thing almost as much as my iBook! First thing my dad said was "where is the rest of it!?" hehe!
    Okay, now onto the issue that with the mini. From the very first moment, it is having massive troubles while transferring files from internet as well as my home network. Right in the middle of file transfer, the transfer (for no apparent reason) just stops. I can stil click and minimize it etc. but thats about it. Then Finder freezes and then I end up restarting the mini my hard-reset...Its quite painful to do that...
    I can see there are lots of posts in regards to wireless issue of mini, but I couldn't locate the one that resembles mine. I can surf the internet fine, but the problem hits as soon as I try to download something directly. Any ideas? Suggestions?
    Oh, Im running a wireless network. My main transfer of files is either from the internet (updating OS X and related files etc.) or to bring in files from my XP-based PC which is on LAN based ethernet. My mini is wifi of course. I don't seem to have any troubles downloading files to my iBook from the same XP PC, but mini isn't able to handle it. Yes, not even the automatic downloads from Apple...
    I want to call Apple but they will just blame it on third party stuff! Sometimes I wonder why they are sitting there in the first place! I am not happy with their customer service. Though I love this forum!!!! Any help will be greatly appreciated :-D Thanks, in advance!

    I've had a similar problem. I've noticed that when I turn off "Convert higher bit-rate songs to ..." that it seems to resolve it. Try that and see if it solves your problem.

  • Stuck while Transfering Purchases

    Hello,
    I recently bought a new computer. I am trying to transfer my iTunes store
    purchases from one computer to the other one via my iPod. I have had to do this
    before.
    For some reason, while I am transfering my purchases, it gets stuck on one of my TV show episodes. I have left it on for hours and this one TV Show episode will not transfer. Until this TV Show episode is transfered, none of my other songs and TV Shows will transfer. I have 154 other songs and TV Shows that have not been transfered yet because this one episode is stuck. About half of the content that was on my iPod is now in my iTunes library.
    I have been given advice to set my iTunes to Manually manage music and videos so I may transfer each item individually over to my computer so that I can bypass that episode, and then try that episode individually to see if it works. I have set it to Manually manage music and videos, but I cannot figure out to how to individually transfer a single song or TV Show episode at a time.
    Thanks

    I am having the same issue. Ihave transferred purchases (652 out of 724) from my iPod to my new computer. It then stops at one particular song. I have stopped and restarted the transfer 3 times and continues to be stuck on one song - ANY THOUGHTS!

  • EA4500 unresponsive while transferring large files

    I got a refurbished EA4500 (directly from Cisco) last week. I have been having a few issues, which I have found (not too great) workarounds for. However, the latest issue has me stumped, and is unacceptable.
    Whenever I am transferring files between 2 computers, I get kind of OK speed (5 MB/s). However, while this transfer happens, no other device can connect to the net. Actually, even trying to go to router home page (192.168.1.1) times out.
    The clients still say they are connected to the router, but I just can't get anywhere.
    As soon as the file transfer finishes, everything goes back to normal.
    EA4500 replaced a WRT54G. Never had any problems with that router. It was such a workhorse. Just needed to upgrade to a n-router.
    I am on the latest non-cloud firmware.
    I have reduced the MTU size to 1200. Not sure that matters.
    Thanks in advance.

    gabhroo wrote:
    I think I figured it out.
    I have EA4500 running in N-only mode.
    I have WRT54G connected to it and running in G-only mode.
    I was transferring files between:
    * Desktop A - Wired to EA4500
    * Desktop B - n-Wireless (EA4500)
    I was testing internet on 2 laptops, both of which are g-only (older laptops) and connected to WRT54G.
    Today morning, I tested this setup again, but tested internet on my phone (n-Wifi). It worked just fine.
    Then, I tried to ping WRT54G from my laptops (during file transfer). The request timed out.
    So, I am guessing it is more of a 2.4ghz conflict. I had already ordered n-wifi usb adapters for my laptops. I should be getting that today.
    However, I still have my mom's laptop and a old wireless printer, which will be on 802.11g.
    Should I:
    a) Just live with it, since there is only 1 or 2 devices?
    b) Just turn off the wireless on WRT54G (still need extra wired ports) and turn on b/g/n on EA4500? I had read somewhere that EA4500 will perform better if it works in n-only mode (but I did not really read the technical details at that time). I had also taken this approach because I was trying to troubleshoot frequent disconnects on my Android devices (which I could not figure out, but got a wifi fixer app, which keeps reconnecting).
    Any other creative ideas?
    I recommend choosing "b". It is better to turn off the wireless of the WRT54G so that it would not create interference with the EA4500 specially that they are on the same location. For the EA4500 you set it to Mixed Mode and just do changes on the wireless settings to make it a stable connection. By the way are you using the classic firmware or the cloud one?

  • HELP! It happens again - an ERROR has occured while transferring the file! (muvo n2

    Ok, So I did what you suggested by creating new folders and not putting em all together in the root. It worked after that so now I wanna manage my folders so I created folders according to the artist name as in A to Z for example. It works fine until the last 2 songs in letter M then the error occurred. So what am I doing wrong again? Did I create too many folders? I have like 6 folders. How should I solve this? Urghhhhh!

    There might be a limit on the total number of files the n200 can hold, or on the number of folders, or number of files per folder. Unfortunately I have not seen any comments from Creative about any specific limits on these. It would be nice if these limits would be publicised, and the information placed in the instruction manual. The limit on the total number of files might be much less than 500. Try transferring different songs to the player and see if you still get an error. I assume that there is still enough remaining space on the player?

  • "an error has ocurred while transferring this file" help!!! Muvo2 1.

    I keep getting this message every time I try to transfer a file. My computer is recognising my muvo2 and it says I have 569mb of space remaining. The message comes up before the file even begins to transfer - it says 0% when it appears. Anyone else having this problem or have any ideas what to do?
    Thanks

    I have exactly the same problem with my MuVo? .5 GB!
    I know that i had once about .GB of mp3s stored on it, however, I deleted all of them to upload a different mp3 collection. Now when I upload files to the MuVo, it stops when I have transfered about 450 MB. However, Windows-Explorer and Creative Media Source both say that there are still 900 and a few MB left, but when i try to copy a file - again "no space left on device".
    I tried to:
    delete all files, try transfer again - same effect
    run scandisk - no change
    format the player from the rescue menu - no change (whatever this does, this is not a real format, more a quickformat)
    updated to the latest firmware - still no change!
    I'm kinda really pissed now, I spent quite some time googling, but didn't find anyone else with that problem.
    So .. where went that "space"? Would it be usefull to re-format the player using the Windows format tool, like suggested in that thread (with the settings from that thread):
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=400
    I started to do that, but since it was *very* slow and the disk was seeking a lot (battery eaten up after about 20 mins!) I stopped the process.
    Maybe I will try that afain tomorrow, but *somehow* this can't be the real solution. Whatever the MuVo does here seems not to be standard behaviour, since scandisk reports the dri've to be OK. Would it be possible to re-partition the MuVo? I guess thats not a good idea, since I believe that the firmware is somewhere on the disk, too.

  • Replica stuck while closing db file which has not been completely sync

    Hi,
    My system has one master and one client running on two different node.
    The replication server is up and running, then I start the replica, but somehow the replica is not
    getting DB_EVENT_REP_STARTUPDONE event within 120 seconds, so the database is closed,
    but while closing the database it got stuck inside a loop that logs the following messages every minute
    "the DB_ENV handle waiting %d minutes for replication lockout to complete" forever.
    (1) In what "failure" scenario, will get the thread stuck inside this loop?
    (2) How to get out of this loop?
    Thanks.

    Hi Sandra,
    Sorry to hear you're having this problem.
    When a replica starts up, it communicates with the master and tries to
    decide if it can do a simple synchronization (if it already has enough
    log history in common with the master), or must instead do a complete
    re-initialization of the database environment ("internal init").
    In the latter case we (understandably) can't satisfy DB->get()
    operations until the internal init is complete. Rather than rejecting
    those operations, we block ("locking out" the API). The idea behind
    that design choice is that it relieves the application of having to
    deal with this peculiar error situation. Unfortunately the API
    lockout is crude, i.e., it affects almost all API methods, including
    DB_ENV->close().
    There is currently no supported, non-hacky way to break out of this
    situation prematurely; one can only wait for all the necessary
    messages to arrive from the master, and eventually complete internal
    init.
    We should probably investigate why the internal init seems to be
    getting stuck. (Presumably there is not so much data that it's simply
    taking more than 120 seconds to load, or you wouldn't be asking.) If
    you turn on verbose diagnostic output at the master, and repeat this
    experiment, by any chance do you see any messages saying "queue limit
    exceeded"?
    Alan Bram
    Oracle

  • Boot camp assistant stuck while 'Copying Windows files...'

    At the moment I am trying to install Windows 7 Ultimate 64 bit using Boot Camp 4.0.1. I have the iso and i'm at the step where Boot Camp Assistant creates a Windows 7 install disk on a USB flash drive. It gets most of the way through the process and stops here, http://imgur.com/Kcxl9 everytime. What can I about this?

    Creating DVD on USB
    Not all USB devices work
    Disk Utility we know is not well suited to burning ISOs
    I would assume the flash drive could be a 'maybe' and it would need to have Master Boot Record partition table.
    I take it the Mini is like the Air in not having a superdrive, and that Assistant provided a driver to support USB-DVD function?
    https://discussions.apple.com/thread/3000991
    https://discussions.apple.com/message/17675647
    https://discussions.apple.com/thread/3756763?tstart=0
    There is a Mac OS X program for burning an ISO that should work too.
    https://discussions.apple.com/thread/3754624
    SimplyBurns (Mac) - Download

  • Time Machine stuck while copying and it ends up blocking the whole mac

    I've a problem with my time machine backup. The backup drive is a partition on an external USB drive. The drive has another partition for data. Everything worked good until yesterday. It gets stuck while copying the files, e.g. 532 MB of 5.45 GB, and it doesn't move even after a couple of hours. The backupd process is constantly using 100 % of one CPU and the other applications are getting stuck as well. I also notice that the USB drive stops spinning at a certain point, as if it goes idle.
    I can't cancel the backup and I have to force shut down the Mac. After the restart, the backup will stop at Zero KB. If I delete the inProgress file nothing changes.
    Here's the log:
    Starting manual backup
    Backing up to: /Volumes/LaCie/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Found 44342 files (4.95 GB) needing backup
    7.4 GB required (including padding), 11.79 GB availabe
    Then nothing more.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Try:
    iTunes: Finding lost media and downloads
    iTunes: How to re-create your iTunes library and playlists
    Next try:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Also:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Error while transferring file :: Error while issuing ssh command.

    Hi All,
    I am having a JSP based website application.
    I am getting the following exception in my logs.
    [ERROR] 05/04/2007 03:43:44 - Error while transferring file :: Error while issuing ssh command.
    java.net.ConnectException: Connection timed out
                at java.net.PlainSocketImpl.socketConnect(Native Method)
                at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
                at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
                at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
                at java.net.Socket.connect(Socket.java:464)
                at java.net.Socket.connect(Socket.java:414)
                at java.net.Socket.<init>(Socket.java:310)
                at java.net.Socket.<init>(Socket.java:125)
                at com.sshtools.j2ssh.net.SocketTransportProvider.<init>(Unknown Source)
                at com.sshtools.j2ssh.net.TransportProviderFactory.connectTransportProvider(Unknown Source)
                at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
                at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
                at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
                at com.novartis.util.DataExporter.transportFile(DataExporter.java:127)
                at com.novartis.util.DataExporter.export(DataExporter.java:101)
                at com.novartis.businessmanagers.SandosSignupManagerPojoImpl.export(SandosSignupManagerPojoImpl.java:103)
                at com.novartis.util.DataExportJob.process(DataExportJob.java:48)
                at com.novartis.util.ExclusiveJob.execute(ExclusiveJob.java:35)
                at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
                at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)Any help would be appreciated.
    Thanks.

    This means that the SSH server you're trying to connect to isn't listening. Is the SSH server running? Are you trying to connect to the right machine?

  • New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

    New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

    "guess no one can help me. thanks anyway have a great night everyone"
    Some of us do find time to sleep.

  • Flash drives and SD/microsd heats up and slow while transferring files, is this normal?

    My new macbook pro heats up my flash drives/sdhc/microsd while transferring files. I thought it was just the Micro sd itself (using MicroUSB adapter) but when plugging in a differnt flash drive it too was getting hot and quickly heating up. I also thought it is pretty slow for a Class 10, which i dont think it is the it could be the flash memory, is there something i am doing wrong? its using mac os x journaled format. This also happens when i plug it in the sdxc slot. Any ideas?

    I had another apparently hung Time Machine backup today.
    Starting Dashboard did NOT fix it this time. However, after what seemed like a long time (probably 5-10 minutes) it apparently freed up on its own and completed the backup normally. This makes it appear my previous result was just "coincidence".
    There were a few error messages thrown into the Console this time by the "backupd" process -- An "Error(-43)" while apparently attempting to find a path to a file with a "null" name.
    Despite that, the backup seems to have copied what it was supposed to copy.

Maybe you are looking for