RMS and FCI Server 2012 r2

Trying to use FCI in combination with an RMS template.
but when i go to create the file management task and try to add the RMS Encrytion action the select template is greyed out and in the box it says unable to retrieve RMS template.
Not sure what i am missing since i can't seam to find a guide on how to set up FCI and RMS on server 2012 R2

Hi,
I found following 2 articles which related to use FCI and RMS. Please see：
Using File Classification Infrastructure (FCI) and AD RMS to automatically protect sensitive information
http://blogs.technet.com/b/filecab/archive/2010/01/31/using-file-classification-infrastructure-fci-and-ad-rms-to-automatically-protect-sensitive-information.aspx
Protect everything: using FCI to protect files of any type with Windows Server 2012
http://blogs.technet.com/b/rms/archive/2012/11/09/protect-everything-using-fci-to-protect-files-of-any-type-with-windows-server-2012.aspx
And we have a specific forum for ADRMS so you could post your question there for further information:
Active Directory Rights Management Service(On premise)
http://social.technet.microsoft.com/Forums/en-US/home?forum=rms
If you have any feedback on our support, please send to [email protected]

Similar Messages

How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

Please follow below technet article :
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
Installing and Configuring Workflow Manager 1.0 (Step by Step)
Note: The steps in this article apply to SharePoint Server 2013.
The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Uninstall SQL Server 2008 Express R2 and SQL Server 2012 unsuccessfully

HI
I want to uninstall SQL Server 2008 R2 and SQL Server 2012 but it was successful.
When I try to uninstall 2008 R2
It shows the sqlsupport.msi can't find
Warning 26003. Microsoft Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
When I uninstall 2012, it shows the SQL Browser has been installed.
Warning 26003. Microsoft SQL sERVER 2012 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server Browser for SQL Server 2012

I tried to uninsall SQL Server 2008 R2 and SQL Server 2012.
Yes, I did what you said : right click on Microsoft SQL Server 2008 R2 and then uninstall.
System pop up window says :
Warning 26003. Microsoft SQL Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
I hope you are uninstalling from Add remove program. Can you first uninstall
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
And then uninstall the
Microsoft SQL Server 2008 R2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

AD RMS cluster with windows server 2008 R2 and Windows Server 2012 R2

please i'm trying to add ADRMS server with windows server 2012 R2 with our ADRMS 2008 R2 cluster. and it fails with the following error:
"The Client DLL version doesn't match with the one of the servers"
so i want to know is it supported to add RMS 2012 R2 server to RMS 2008 R2 Cluster
Thanks

They can't coexist, but usually what happens is you add the 2012 server, it migrates your cluster database and then your 2008r2 servers can no longer connect.
What is this value:
DRMS_Config database
dbo.DRMS_ClusterPolicies
AdrmsFileVersion

Azure RMS and FCI Servers

I am setting up a FCI server and want to encrypt certain documents based on policy. I have completed the pre-requisites and have reached the stage to install the RMS Connector. After installing it, I went to authorise a FCI server but I do not
have that option. The only options available are Exchange and Sharepoint.
I have tried the sharepoint option and specified the computer account but when running the GetConenctorConfig script I receive back a 401 Unauthorised error. Any thoughts as to why the option for a FCI server type is not present? Seems to be
a significant oversight.
Regards
Pete Hall

This was a pretty recent addition and I know it took a while for it to show up for everyone.
Is this still an issue?

Rms and ad fs 2012 integration

I am trying to follow the documentation with AD RMS and AD FS integration. The TechNet articles, videos, and blogs are all dated. For example,
http://technet.microsoft.com/en-us/library/ee256071(v=WS.10).aspx
Even the new posts reference the old ones on this subject - i'm looking for a step-by-step on how these two are integrated. The UI in ADFS 2012 is different and I don't know AD FS well enough to translate. I would love a TechNet Lab
Guide on these procedures but so much of the new documentation focuses on just the new features. Some help or a link would be appreciated.
TIA
Jason Yates

Hi Jason,
I suggest you download this word document:
AD RMS with AD FS Identity Federation Step-by-Step Guide
http://www.microsoft.com/en-us/download/details.aspx?id=17279
In addition, here is another article:
Federating AD RMS
http://technet.microsoft.com/en-us/library/ee256071(v=WS.10).aspx
I am sorry that I wasn’t able to find step by step documents which are dedicated to Windows Server 2012, though most steps in above documents should also be applicable.
Best Regards,
Amy

Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?

Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

HP Laserjet P1606dn and Windows Server 2012

We have 3 HP Laserjet P1606dn printers that we need to install on a Windows Server 2012. Unfortunately, there is no drive available for Windows Server 2012. Will HP be releasing an updated driver for this printer? If not, are there any workarounds? Thanks for any assistance.

Hi ks267,
I don't know if or when there would be an updated driver to work with Windows Server 2012, but I can offer you a link to subscribe to notifications for driver updates. Subscribe to HP alerts and updates.
The only workaround I can think of is to install the software on each computer rather than installing it on the server. Although if you have 20+ computers that would not be ideal I am sure Please bear in mind, my technical expertise is with consumer products and software, I have no training on servers.
Maybe your request for a workaround will be answered by another community member who knows more about them.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON' between sql server 2005 32 bit and sql server 2012 64 bit

Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.S

Hello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

PerformancePoint in Sharepoint 2010 and SQL Server 2012 data source

Hi,
I have a problem on creating PerformancePoint reports in Sharepoint 2010 based on SQL Server 2012 source data.
I try to create a data source in PerformancePoint dashboard designer, I choose Analysis Services, and I get a following error:
"The data source cannot be used because PerformancePoint Services is not
configured correctly...."
I think it is due to a version of a ADOMD.NET component that needs to be installed, but I am not sure which version is necessary? Could you help
me with that?
Of course, if there are any other prerequisites, please, tell me.
Regards,
Srdjan Nikitovic

Did you set unattended service account for your PPS?
The Data source cannot be used because PerformancePoint
Services is not configured correctly
http://ericphan.net/blog/2010/4/19/performance-point-server-error-the-unattended-service-accoun.html
Amit

SharePoint 2013 Enterprise and SQL Server 2012 Standard edition vs. Enterprise - feature question

I can't seem to find any clear answers to the implications of installing SQL Server 2012 standard edition vs. enterprise in regards to SharePoint 2013.
I understand that to get many of the features you need Enterprise edition of SQL 2012; but, what I can't figure out is if the backend SharePoint SQL 2012 is standard; but, the PowerPivot/SSRS server is Enterprise will we still get the features?
If we have 3 tier SharePoint farm, one of those tiers is for the SQL Server database backend. If that SQL instance is 2012 standard and we add another server to the farm w/ SQL 2012 Enterprise to handle the tabular models, PowerPivot, and SSRS in integrated
mode will we still get the features?
Or, can we (should we) install Enterprise 2012 as the SharePoint database backend and let that instance triple down as also the PowerPivot and SSRS instance?
The Degenerate Dimension

Hi MMilligan,
SQL Server 2012 Standard is not supported PowePivot for SharePoint . In addition, SQL Server 2012 Standard is also not support some Reporting Services Features.
For more information, please refer to Features Supported by the Editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/cc645993.aspx.
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://msdn.microsoft.com/en-us/library/jj218795.aspx.
If you have any problem, please feel free to let me know.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

RMS and FCI Server 2012 r2

Similar Messages

Maybe you are looking for